RESUMO
Contact resistance is a multifaceted challenge faced by the 2D materials community. Large Schottky barrier heights and gap-state pinning are active obstacles that require an integrated approach to achieve the development of high-performance electronic devices based on 2D materials. In this work, we present semiconducting PtSe2 field effect transistors with all-van-der-Waals electrode and dielectric interfaces. We use graphite contacts, which enable high ION/IOFF ratios up to 109 with currents above 100 µA µm-1 and mobilities of 50 cm2â¯V-1â¯s-1 at room temperature and over 400 cm2â¯V-1â¯s-1 at 10 K. The devices exhibit high stability with a maximum hysteresis width below 36 mV nm-1. The contact resistance at the graphite-PtSe2 interface is found to be below 700 Ω µm. Our results present PtSe2 as a promising candidate for the realization of high-performance 2D circuits built solely with 2D materials.
RESUMO
The aim of this study was the preparation of different amorphous silicon-carbon hybrid thin-layer materials according to the liquid phase deposition (LPD) process using single-source precursors. In our study, 2-methyl-2-silyltrisilane (methylisotetrasilane; 2), 1,1,1-trimethyl-2,2-disilyltrisilane (trimethylsilylisotetrasilane; 3), 2-phenyl-2-silyltrisilane (phenylisotetrasilane; 4), and 1,1,2,2,4,4,5,5-octamethyl-3,3,6,6-tetrasilylcyclohexasilane (cyclohexasilane; 5) were utilized as precursor materials and compared with the parent compound 2,2-disilyltrisilane (neopentasilane; 1). Compounds 2-5 were successfully oligomerized at λ = 365 nm with catalytic amounts of the neopentasilane oligomer (NPO). These oligomeric mixtures (NPO and 6-9) were used for the preparation of thin-layer materials. Optimum solution and spin coating conditions were investigated, and amorphous silicon-carbon films were obtained. All thin-layer materials were characterized via UV/vis spectroscopy, light microscopy, spectroscopic ellipsometry, XPS, SEM, and SEM/EDX. Our results show that the carbon content and especially the bandgap can be easily tuned using these single-source precursors via LPD.
RESUMO
The classical implementation for putting quantitative figures on maps to reveal elemental compositions in transmission electron microscopy is by analytical methods like X-ray and energy-loss spectroscopy. Typically, the technique in use often depends on whether lighter or heavier elements are present and-more practically-which calibrations are available or sample-related properties are known. A framework linking electron energy-loss spectroscopy (EELS) and energy-dispersive X-ray (EDX) signals such that absolute volumetric concentrations can be derived without assumptions made a priori about the unknown sample, is largely missing. In order to combine both techniques and harness their respective potentials for a light and heavy element analysis, we have set up a powerful hardware configuration and implemented an experimental approach, which reduces the need for estimates on many parameters needed for quantitative work such as densities, absolute thicknesses, theoretical ionization cross-sections, etc. Calibrations on specimens with known geometry allow the measurement of inelastic mean free paths. As a consequence, mass-thicknesses obtained from the EDX ζ-factor approach can be broken up and quantities like concentrations and partial energy-differential ionization cross-sections become accessible. ζ-factors can then be used for conversion into EELS cross-sections that are hard to determine otherwise, or conversely, connecting EDXS and EELS in a quantitative manner quite effectively.
RESUMO
Whole sample microscopy mappings are of interest in many cases as they provide analytical information of phases varying in size by orders of magnitude and in composition across the sample. These benefits are amplified if more than one microscopic technique is used for the mappings. However, to take full advantage of correlative whole sample mappings, the data of each technique has to be carefully prepared, treated, correlated and evaluated. With this work, we want to present the key steps of our data treatment approach as well as the results on an exemplary sample, the Chelyabinsk meteorite. The most important step in our data treatment approach is to start by evaluating the spectral maps separately as far as possible (at-% quantification for EDS for example) and then generate pseudo spectral maps from this evaluation in the form of image stacks. This allows us to preserve the advantages of specialized software packages and standard work flows for every spectral mapping, whilst also unifying the data format and compressing the data sufficiently for correlation and the application of machine learning tools. We have performed whole sample mappings using SEM, EDS and Raman on a cross-section of a Chelyabinsk meteorite fragment, roughly 1.0cm × 0.8cm large. Combining these mappings into a single "super" spectral map, we were able to produce a uniquely detailed mapping of the composition of the meteorite fragment, as well as perform a quantitative analysis of the elemental composition of several crystallographic phases. The results of our compositional analysis; olivine (Fo72Fa28), pyroxene (≈ 97 % En80Fs20Wo0 and 3 % En56Fs6Wo38), feldspar (albite), troilite, FeNi (taenite and kamacite), merrillite, chromite and hydroxyapatite; agree qualitatively with other reports from literature.
Assuntos
MeteoroidesRESUMO
Nowadays "microplastics" (MPs) is an already well-known term and results of micro-sized particles found in consumer products or environments are regularly reported. However, studies of native MPs smaller than 1 µm, often referred to as nanoplastics (NPs), in analytically challenging environments are rare. In this study, a correlative approach between scanning electron microscopy and Raman microscopy is tested to meet the challenges of finding and identifying NPs in the 100 nm range in various environments, ranging from ideal (distilled water) to challenging (sea salt, human amniotic fluid). To test the viability of this approach in principle, standardized polystyrene beads (Ø 200 nm) are mixed into the various environments in different concentrations. Promising detection limits of 2 10-3 µg/L (distilled water), 20 µg/L (sea salt) and 200 µg/L (human amniotic fluid) are found. To test the approach in practices both sea salt and amniotic fluid are analysed for native NPs as well. Interestingly a nylon-NP was found in the amniotic fluid, maybe originating from the sampling device. However, the practical test reveals limitations, especially with regard to the reliable identification of unknown NPs by Raman microscopy, due to strong background signals from the environments. We conclude from this in combination with the excellent performance in distilled water that a combination of this approach with an advanced sample preparation technique would yield a powerful tool for the analysis of NPs in various environments.