Harvesting of aerial humidity with natural hygroscopic salt excretions.

Plants and animals that thrive in arid regions utilize the diurnal changes in environmental temperature and humidity to optimize their water budget by combining water-harvesting mechanisms and morphophysiological traits. The Athel tamarisk (Tamarix aphylla) is a halophytic desert shrub that survives in arid, hypersaline conditions by excreting concentrated solutions of ions as droplets on its surface that crystallize into salt crystals and fall off the branches. Here, we describe the crystallization on the surface of the plant and explore the effects of external conditions such as diurnal changes in humidity and temperature. The salt mixtures contain at least ten common minerals, with NaCl and CaSO4·2H2O being the major products, SiO2 and CaCO3 main sand contaminants, and Li2SO4, CaSO4, KCl, K2Ca(SO4)2·H2O, CaMg(CO3)2 and AlNaSi3O8 present in smaller amounts. In natural conditions, the hanging or sitting droplets remain firmly attached to the surface, with an average adhesion force of 275 ± 3.5 µN measured for pure water. Rather than using morphological features of the surface, the droplets adhere by chemical interactions, predominantly by hydrogen bonding. Increasing ion concentration slightly increases the contact angle on the hydrophobic cuticle, thereby lowering surface wettability. Small amounts of lithium sulfate and possibly other hygroscopic salts result in strong hygroscopicity and propensity for deliquescence of the salt mixture overnight. Within a broader context, this natural mechanism for humidity harvesting that uses environmentally benign salts as moisture adsorbents could provide a bioinspired approach that complements the currently available water collection or cloud-seeding technologies.

In Situ Conversion of Ligand to a Coordination Polymer via a Core@Shell Crystal: A Multi-Step Phase-Dependent Structural Transformation.

Two pseudopolymorphic 1D coordination polymers of the formulas [Cd(3,3'-pytz)(CH3OH)2(ClO4)2]n (1) and [Cd(3,3'-pytz)(CH3CN)2(ClO4)2]n (2) have been prepared using the electron-deficient 3,6-bis(pyridin-3-yl)-1,2,4,5-tetrazine (3,3'-pytz) ligand and cadmium perchlorate in the chloroform/methanol and chloroform/acetonitrile solvent system, respectively. It was observed that compounds 1 and 2 experienced one-step (CPreagent → CPproduct) single-crystal-to-powder structural transformation to the pure water-coordinated compound [Cd(3,3'-pytz)(H2O)2(ClO4)2]n (3) by absorbing water vapor from air (solid-gas phase transformation). Interestingly, compounds 1, 2, and 3 undergo a different transformation path and show an in situ unique three-step (CPreagent → CPproduct → Ligandintermediate → CPproduct) single-crystal-to-single-crystal (SCSC) structural transformation process through soaking in deionized water (solid-liquid phase transformation). In this fascinating transformation, we report for the first time the direct conversion of a ligand into a coordination polymer by a rare core-shell pathway in a solid-liquid phase transformation. In this process, we obtained compound {[Cd(3,3'-pytz)(H2O)4](3,3'-pytz)2(ClO4)2(H2O)6}n (4) (single-crystal = S, crystal = C, or microcrystal = P) as mixed compounds of core-shell L@4C and 4S or core-shell L@4P and 4P for compounds (1 and 2) and 3, respectively.

Unlocking New Topologies in Zr-Based Metal-Organic Frameworks by Combining Linker Flexibility and Building Block Disorder.

The outstanding diversity of Zr-based frameworks is inherently linked to the variable coordination geometry of Zr-oxo clusters and the conformational flexibility of the linker, both of which allow for different framework topologies based on the same linker-cluster combination. In addition, intrinsic structural disorder provides a largely unexplored handle to further expand the accessibility of novel metal-organic framework (MOF) structures that can be formed. In this work, we report the concomitant synthesis of three topologically different MOFs based on the same M6O4(OH)4 clusters (M = Zr or Hf) and methane-tetrakis(p-biphenyl-carboxylate) (MTBC) linkers. Two novel structural models are presented based on single-crystal diffraction analysis, namely, cubic c-(4,12)MTBC-M6 and trigonal tr-(4,12)MTBC-M6, which comprise 12-coordinated clusters and 4-coordinated tetrahedral linkers. Notably, the cubic phase features a new architecture based on orientational cluster disorder, which is essential for its formation and has been analyzed by a combination of average structure refinements and diffuse scattering analysis from both powder and single-crystal X-ray diffraction data. The trigonal phase also features structure disorder, although involving both linkers and secondary building units. In both phases, remarkable geometrical distortion of the MTBC linkers illustrates how linker flexibility is also essential for their formation and expands the range of achievable topologies in Zr-based MOFs and its analogues.

Structure and Ionic Conductivity of Li-Disordered Bismuth o-Thiophosphate Li60-3xBi16+x(PS4)36.

The structure of the first lithium-containing bismuth ortho (o)-thiophosphate was determined using a combination of powder X-ray, neutron, and electron diffraction. Li60-3xBi16+x(PS4)36 with x in the range of 4.1-6.5 possesses a complex monoclinic structure [space group C2/c (No. 15)] and a large unit cell with the lattice parameters a = 15.4866 Å, b = 10.3232 Å, c = 33.8046 Å, and ß = 85.395° for Li44.4Bi21.2(PS4)36, in agreement with the structure as observed by X-ray and neutron pair distribution function analysis. The disordered distribution of lithium ions within the interstices of the dense host structure and the Li ion dynamics and diffusion pathways have been investigated by solid-state nuclear magnetic resonance (NMR) spectroscopy, pulsed field gradient NMR diffusion measurements, and bond valence sum calculations. The total lithium ion conductivities range from 2.6 × 10-7 to 2.8 × 10-6 S cm-1 at 20 °C with activation energies between 0.29 and 0.32 eV, depending on the bismuth content. Despite the highly disordered nature of lithium ions in Li60-3xBi16+x(PS4)36, the underlying dense host framework appears to limit the dimensionality of the lithium diffusion pathways and emphasizes once more the necessity of a close inspection of the structure-property relationships in solid electrolytes.

Modulating Thermal Properties of Polymers through Crystal Engineering.

Crystal engineering has exclusively focused on the development of advanced materials based on small organic molecules. We now demonstrate how the cocrystallization of a polymer yields a material with significantly enhanced thermal stability but equivalent mechanical flexibility. Isomorphous replacement of one of the cocrystal components enables the formation of solid solutions with melting points that can be readily fine-tuned over a usefully wide temperature range. The results of this study credibly extend the scope of crystal engineering and cocrystallization from small molecules to polymers.

Ion transport mechanism in anhydrous lithium thiocyanate LiSCN part III: charge carrier interactions in the premelting regime.

In lithium thiocyanate Li(SCN), the temperature regime below the melting point (274 °C) is characterized by excess conductivities over the usual Arrhenius behavior (premelting regime). Here, the Schottky defect pair concentration is high, and the point defect chemistry can no longer be considered as dilute. Coulomb interactions of Schottky pairs are expected to occur lowering the formation energy of new carriers and hence leading avalanche-like to a transition into a fully defective superionic state. The respective non-linear behavior is investigated using the cube-root law approach characterized by a defect interaction parameter J, which is a measure of the effective defect-lattice energy. In the case of Li(SCN), the rather pronounced volume expansion is to be included in the model. A literature comparison with other materials emphasizes to what degree defect formation as well as defect interactions depend not only on the dominant mobile defect, but also on the respective sublattice. Overall, a quantitative description of the defect chemistry of Li(SCN) in the premelting regime is derived.

Ion transport mechanism in anhydrous lithium thiocyanate LiSCN Part I: ionic conductivity and defect chemistry.

This work reports on the ion transport properties and defect chemistry in anhydrous lithium thiocyanate Li(SCN), which is a pseudo-halide Li+ cation conductor. An extensive doping study was conducted, employing magnesium, zinc and cobalt thiocyanate as donor dopants to systematically vary the conductivity and derive a defect model. The investigations are based on impedance measurements and supported by other analytical techniques such as X-ray powder diffraction (XRPD), infrared (IR) spectroscopy, and density functional theory (DFT) calculations. The material was identified as Schottky disordered with lithium vacancies being the majority mobile charge carriers. In the case of Mg2+ as dopant, defect association with lithium vacancies was observed at low temperatures. Despite a comparably low Schottky defect formation enthalpy of (0.6 ± 0.3) eV, the unexpectedly high lithium vacancy migration enthalpy of (0.89 ± 0.08) eV distinguishes Li(SCN) from the chemically related lithium halides. A detailed defect model of Li(SCN) is presented and respective thermodynamic and kinetic data are given. The thiocyanate anion (SCN)- has a significant impact on ion mobility due to its anisotropic structure and bifunctionality in forming both Li-N and Li-S bonds. More details about the impact on ion dynamics at local and global scale, and on the defect chemical analysis of the premelting regime at high temperatures are given in separate publications (Part II and Part III).

Ion transport mechanism in anhydrous lithium thiocyanate LiSCN part II: frequency dependence and slow jump relaxation.

Specific aspects of the Li+ cation conductivity of anhydrous Li(SCN) are investigated, in particular the high migration enthalpy of lithium vacancies. Close inspection of impedance spectra and conductivity data reveals two bulk relaxation processes, with comparatively fast ion transport at high frequencies and slow ion migration at low frequencies. The impedance results are supported by solid state nuclear magnetic resonance (ssNMR), and pair distribution function (PDF) analysis. This behavior reflects a frequency dependent conductivity, which is related to the extremely slow thiocyanate (SCN)- anion lattice relaxation that occurs when a Li+ cation jumps to the next available site. Two possible migration models are proposed: the first model considers an asymmetric energy landscape for Li+ cation hopping, while the second model is connected to the jump relaxation model and allows for 180° rotational disorder of the (SCN)- anion. A complete kinetic analysis for the hopping of Li+ cations is presented, which reveals new fundamental insights into the ion transport mechanism of materials with complex anions.

Reversible Thermosalience in a One-Dimensional Coordination Polymer Preceded by Anisotropic Thermal Expansion and the Shape Memory Effect.

Thermally responsive crystals hold great potential for their use as actuating materials by acting as energy transducers to convert heat energy to mechanical work. Control over defined phase transition temperature with rapid reconfiguration is of great advantage for actuation. The thermosalient (TS) effect is a rarely observed phenomenon in coordination polymers (CPs), let alone the reversibility of thermosalience in CPs. Herein, we report the reversible TS effect in a one-dimensional CP due to the martensitic phase transition during both heating and cooling cycles. The TS effect was preceded by anisotropic thermal expansion showing high expansion coefficients. In addition, the nonmolecular crystals show reversible contraction and recovery during multiple heating-cooling cycles due to the self-restorative shape memory effect. The reversible actuation of the CP could be repeated for 20 heating-cooling cycles in differential scanning calorimetry experiments, suggesting its great potential as a multicyclic actuator. Such thermal responsive behavior is unique in metal-organic materials.

Interlayer Interactions as Design Tool for Large-Pore COFs.

Covalent organic frameworks (COFs) with a pore size beyond 5 nm are still rarely seen in this emerging field. Besides obvious complications such as the elaborated synthesis of large linkers with sufficient solubility, more subtle challenges regarding large-pore COF synthesis, including pore occlusion and collapse, prevail. Here we present two isoreticular series of large-pore imine COFs with pore sizes up to 5.8 nm and correlate the interlayer interactions with the structure and thermal behavior of the COFs. By adjusting interlayer interactions through the incorporation of methoxy groups acting as pore-directing "anchors", different stacking modes can be accessed, resulting in modified stacking polytypes and, hence, effective pore sizes. A strong correlation between stacking energy toward highly ordered, nearly eclipsed structures, higher structural integrity during thermal stress, and a novel, thermally induced phase transition of stacking modes in COFs was found, which sheds light on viable design strategies for increased structural control and stability in large-pore COFs.

Amine-Linked Covalent Organic Frameworks as a Platform for Postsynthetic Structure Interconversion and Pore-Wall Modification.

Covalent organic frameworks have emerged as a powerful synthetic platform for installing and interconverting dedicated molecular functions on a crystalline polymeric backbone with atomic precision. Here, we present a novel strategy to directly access amine-linked covalent organic frameworks, which serve as a scaffold enabling pore-wall modification and linkage-interconversion by new synthetic methods based on Leuckart-Wallach reduction with formic acid and ammonium formate. Frameworks connected entirely by secondary amine linkages, mixed amine/imine bonds, and partially formylated amine linkages are obtained in a single step from imine-linked frameworks or directly from corresponding linkers in a one-pot crystallization-reduction approach. The new, 2D amine-linked covalent organic frameworks, rPI-3-COF, rTTI-COF, and rPy1P-COF, are obtained with high crystallinity and large surface areas. Secondary amines, installed as reactive sites on the pore wall, enable further postsynthetic functionalization to access tailored covalent organic frameworks, with increased hydrolytic stability, as potential heterogeneous catalysts.

Humidity-Induced Structural Transformation in Pseudopolymorph Coordination Polymers.

Three cadmium coordination polymers, namely, {[CdL(OAc)2](C2H5OH)}n (1), {[CdL(OAc)2](CH3CN)}n (2), and [CdL(OAc)2(H2O)]n (3), were synthesized by an exoditopic 1,4-bis(4-pyridyl)-2,3-diaza-1,3-butadiene Schiff base ligand (L) and cadmium acetate in the presence of different solvent systems. Single-crystal X-ray diffraction, powder X-ray diffraction, and thermogravimetric analysis showed that 1D ladder pseudopolymorphic compounds (1 and 2) transformed to the solvent-free 1D linear compound 3 through a rare case of water absorption from air at room temperature. Interestingly, compound 3 was transformed to compound 1 through a dissolution-recrystallization structural transformation process. The results illustrated that solvents and humidity have an important role in the formation of pseudopolymorphs with the same or different structural motifs.

Na9 Bi5 Os3 O24 : A Diamagnetic Oxide Featuring a Pronouncedly Jahn-Teller-Compressed Octahedral Coordination of Osmium(VI).

The Jahn-Teller (JT) theorem constitutes one of the most fundamental concepts in chemistry. In transition-element chemistry, the 3d4 and 3d9 configurations in octahedral complexes are particularly illustrative, where a distortion in local geometry is associated with a reduction of the electronic energy. However, there has been a lasting debate about the fact that the octahedra are found to exclusively elongate. In contrast, for Na9 Bi5 Os3 O24 , the octahedron around Os6+ (5d2 ) is heavily compressed, lifting the degeneracy of the t2g set of 5d orbitals such that in the sense of a JT compression a diamagnetic ground state results. This effect is not forced by structural constraints, the structure offers sufficient space for osmium to shift the apical oxygen atoms to a standard distance. The relevance of these findings is far reaching, since they provide new insights in the hierarchy of perturbations defining ground states of open shell electronic systems.

Propyne Gas Adsorption in a Cyclic Hexapeptoid: A Combined In Situ XRPD and DFTB Study*.

Cyclic peptoids are macrocyclic N-substituted oligoglycines, with remarkable structural, chemical and physical properties. The gas adsorption properties of a permanently porous hexameric cyclopeptoid decorated with four propargyl and two methoxyethyl side chains were monitored by in situ X-ray powder diffraction (XRPD). High-resolution XRPD data together with Rietveld and density functional based tight binding (DFTB) method allowed us to locate propyne guest molecules inside the host channels, even though the powder sample contains more than one phase. We were able to characterize the host-guest interactions, providing useful information on the host recognition sites and discuss host adaptiveness and host-guest chemical affinity in comparison with analogous compounds.

Idiosyncratic Ag7Pt2O7: An Electron Imprecise yet Diamagnetic Small Band Gap Oxide.

The seminal qualitative concepts of chemical bonding, as presented by Walter Kossel and Gilbert Newton Lewis back in 1916, have lasting general validity. These basic rules of chemical valence still serve as a touchstone for validating the plausibility of composition and constitution of a given chemical compound. We report on Ag7Pt2O7, with a composition that violates the basic rules of chemical valence and an exotic crystal structure. The first coordination sphere of platinum is characteristic of tetravalent platinum. Thus, the electron count corresponds to Ag7Pt2O7*e-, where excess electrons are associated with the silver substructure. Such conditions given, it is commonly assumed that the excess electrons are either itinerant or localized in Ag-Ag bonds. However, the material does not show metallic conductivity, nor does the structure feature Ag-Ag pairs. Instead, the excess electrons organize themselves in 2e-4c bonds within the silver substructure. This subvalent silver oxide reveals a new general facet pertinent to silver chemistry.

Corrosion of Heritage Objects: Collagen-Like Triple Helix Found in the Calcium Acetate Hemihydrate Crystal Structure.

Helical motifs are common in nature, for example, the DNA double or the collagen triple helix. In the latter proteins, the helical motif originates from glycine, the smallest amino acid, whose molecular confirmation is closely related to acetic acid. The combination of acetic acid with calcium and water, which are also omnipresent in nature, materializing as calcium acetate hemihydrate, was now revealed to exhibit a collagen-like triple helix structure. This calcium salt is observed as efflorescence phase on calcareous heritage objects, like historic Mollusca shells, pottery or marble reliefs. In a model experiment pure calcium acetate hemihydrate was crystallized on the surface of a terracotta vessel. Calcium acetate hemihydrate crystallizes in a surprisingly large unit cell with a volume of 11,794.5(3) Å3 at ambient conditions. Acetate ions bridge neighboring calcium cations forming spiral chains, which are arranged in a triple helix motif.

Giant Enhancement of Second Harmonic Generation Accompanied by the Structural Transformation of 7-Fold to 8-Fold Interpenetrated Metal-Organic Frameworks (MOFs).

Interpenetration in metal-organic frameworks (MOFs) is an intriguing phenomenon with significant impacts on their properties, and functional applications. Herein, we show that a 7-fold interpenetrated MOF (1) is transformed into an 8-fold interpenetrated MOF by the loss of DMF in a single-crystal-to-single-crystal manner. This is accompanied by a giant enhancement of the second harmonic generation (SHG ca. 125 times) and two-photon photoluminescence (ca. 14 times). The strengthened π-π interaction between the individual diamondoid networks and intensified oscillator strength of the molecules aid the augment of dipole moments and boost the nonlinear optical conversion efficiency. Large positive and negative thermal expansions of 1 occur at 30-150 °C before the loss of DMF. These results offer an avenue to manipulate the NLO properties of MOFs using interpenetration and provide access to tunable single-crystal NLO devices.

Controlling the Polymorphism and Topology Transformation in Porphyrinic Zirconium Metal-Organic Frameworks via Mechanochemistry.

Tetratopic porphyrin-based metal-organic frameworks (MOFs) represent a particularly interesting subclass of zirconium MOFs due to the occurrence of several divergent topologies. Control over the target topology is a demanding task, and reports often show products containing phase contamination. We demonstrate how mechanochemistry can be exploited for controlling the polymorphism in 12-coordinated porphyrinic zirconium MOFs, obtaining pure hexagonal PCN-223 and cubic MOF-525 phases in 20-60 min of milling. The reactions are mainly governed by the milling additives and the zirconium precursor. In situ monitoring by synchrotron powder X-ray diffraction revealed that specific reaction conditions resulted in the formation of MOF-525 as an intermediate, which rapidly converted to PCN-223 upon milling. Electron spin resonance measurements revealed significant differences between the spectra of paramagnetic centers in two polymorphs, showing a potential of polymorphic Zr-MOFs as tunable supports in spintronics applications.

Superconductivity at 4.8 K and Violation of Pauli Limit in La2IRu2 Comprising Ru Honeycomb Layer.

We discovered superconductivity at 4.8 K in the hexagonal layered compound La2IRu2 comprising a triangular lattice of the La and a honeycomb lattice of the Ru atoms. First-principles calculations reveal a two-dimensional band structure made up of La 5d and Ru 4d electrons and formal oxidation states +1.5 for the La and the uncommon oxidation state -1 for the Ru atoms. The temperature dependence of the specific heat indicates fully gapped superconductivity. Nevertheless, the upper critical field of this compound violates the Pauli limit. We argue that the high upper critical field is ascribed to an antisymmetric spin-orbit coupling in the unique multilayer structure.

Ultrahigh Damping Capacities in Lightweight Structural Materials.

The demand to outperform current technologies pushes scientists to develop novel strategies, which enable the fabrication of materials with exceptional properties. Along this line, lightweight structural materials are of great interest due to their versatile applicability as sensors, catalysts, battery electrodes, and acoustic or mechanical dampers. Here, we report a strategy to design ultralight (ρ = 3 mg/cm3) and hierarchically structured ceramic scaffolds of macroscopic size. Such scaffolds exhibit mechanical reversibility comparable to that of microscopic metamaterials, leading to a macroscopically remarkable dynamic mechanical performance. Upon mechanical loading, these scaffolds show a deformation mechanism similar to polyurethane foams, and this resilience yields ultrahigh damping capacities, tan δ, of up to 0.47.