Positron Emission Tomography Studies of the Biodistribution, Translocation, and Fate of Poly Allyl Amine-Based Carriers for Sirna Delivery by Systemic and Intratumoral Administration.

Polyamine-based vectors offer many advantages for gene therapy, but they are hampered by a limited knowledge on their biological fate and efficacy for nucleic acid delivery. The 18 F radiolabeled siRNA is complexed with poly(allyl amine) hydrochloride (PAH), PEGylated PAH (PAHPEG ), or oleic acid-modified PAH (PAHOleic ) to form polyplexes, and injected them intravenously into healthy rodents. The biodistribution patterns obtained by positron emission tomography (PET) imaging vary according to the polymer used for complexation. Free siRNA is quickly eliminated through the bladder. PAH and oleic acid modify PAH polyplexes accumulate in the lungs and liver. No elimination through the bladder is observed for PAH and PAHOleic within 2 h after administration. PAHPEG polyplexes accumulate in kidneys and are eliminated through the bladder. Polyplexes prepared with 18 F-labeled oleic acid-modified PAH and non-labeled siRNA show similar biodistribution to those prepared with labeled siRNA, but with more accumulation in the lungs due to the presence of non-complexed polymer. Intravenous administration of PAHOleic polyplexes in tumor models results in a limited availability of siRNA. When PAHOleic polyplexes are administered intratumorally in tumor bearing rodents, ≈40% of the radioactivity is retained in the tumor after 180 min while free siRNA is completely eliminated.

3D Printable Dynamic Hydrogel: As Simple as it Gets!

3D printing technology offers a vast range of applications for tissue engineering applications. Over the past decade a vast range of new equipment has been developed; while, 3D printable biomaterials, especially hydrogels, are investigated to fit the printability requirements. The current candidates for bioprinting often require post-printing cross-linking to maintain their shape. On the other hand, dynamic hydrogels are considered as the most promising candidate for this application with their extrudability and self-healing properties. However, it proves to be very difficult to match the required rheological in a simple material. Here, this study presents for the first time the simplest formulation of a dynamic hydrogel based on thiol-functionalized hyaluronic acid formulated with gold ions that fulfill all the requirements to be printed without the use of external stimuli, as judged by the rheological studies. The printability is also demonstrated with a 3D printer allowing for the printing of the dynamic hydrogel as it is, achieving 3D construct with a relatively good precision and up to 24 layers, corresponding to 10 mm high. This material is the simplest 3D printable hydrogel and its mixture with cells and biological compounds is expected to open a new era in 3D bioprinting.

Risk Governance of Emerging Technologies Demonstrated in Terms of its Applicability to Nanomaterials.

Nanotechnologies have reached maturity and market penetration that require nano-specific changes in legislation and harmonization among legislation domains, such as the amendments to REACH for nanomaterials (NMs) which came into force in 2020. Thus, an assessment of the components and regulatory boundaries of NMs risk governance is timely, alongside related methods and tools, as part of the global efforts to optimise nanosafety and integrate it into product design processes, via Safe(r)-by-Design (SbD) concepts. This paper provides an overview of the state-of-the-art regarding risk governance of NMs and lays out the theoretical basis for the development and implementation of an effective, trustworthy and transparent risk governance framework for NMs. The proposed framework enables continuous integration of the evolving state of the science, leverages best practice from contiguous disciplines and facilitates responsive re-thinking of nanosafety governance to meet future needs. To achieve and operationalise such framework, a science-based Risk Governance Council (RGC) for NMs is being developed. The framework will provide a toolkit for independent NMs' risk governance and integrates needs and views of stakeholders. An extension of this framework to relevant advanced materials and emerging technologies is also envisaged, in view of future foundations of risk research in Europe and globally.

Self-Healing Dynamic Hydrogel as Injectable Shock-Absorbing Artificial Nucleus Pulposus.

The intervertebral discs (IVDs) provide unique flexibility to the spine and exceptional shock absorbing properties under impact. The inner core of the IVD, the nucleus pulposus (NP) is responsible for this adaptive behavior. Herein, we evaluate an injectable, self-healing dynamic hydrogel (DH) based on gold(I)-thiolate/disulfide (Au-S/SS) exchange as NP replacement in a spine motion segment model. For the first time, we report the application of dynamic covalent hydrogels inside biological tissues. The dynamic exchange between Au-S species and disulfide bonds (SS) resulted in self-healing ability and frequency-dependent stiffness of the hydrogel, which was also confirmed in spine motion segments. Injection of preformed DH into nucleotomized IVDs restored the full biomechanical properties of intact IVDs, including the stiffening effect observed at increasing frequencies, which cannot be achieved with conventional covalent hydrogel. DH has the potential to counteract IVD degeneration associated with high frequency vibrations. Self-healing properties, confirmed by rheology studies and macroscopic observation after injection, were required to inject preformed DH, which recovered its mechanical integrity and microstructure to act as an artificial NP. On the other hand, covalent hydrogel did not show any restoration of NP properties as this conventional material suffered irreversible damages after injection, which demonstrates that the dynamic properties are crucial for this application. The persistence of DH in the IVD space following cyclic high-frequency loading, confirmed by tomography after mechanical testing, suggests that this material would have long life span as an injectable NP replacement material.

Injectable and Self-Healing Dynamic Hydrogels Based on Metal(I)-Thiolate/Disulfide Exchange as Biomaterials with Tunable Mechanical Properties.

Despite numerous strategies involving dynamic covalent bonds to produce self-healing hydrogels with similar frequency-dependent stiffness to native tissues, it remains challenging to use biologically relevant thiol/disulfide exchange to confer such properties to polymeric networks. Herein, we report a new method based on Metal(I) [Au(I) or Ag(I)] capping to protect thiolates from aerial oxidation without preventing thiolate/disulfide exchange. Dynamic hydrogels were readily prepared by injecting simultaneously aqueous solutions of commercially available HAuCl4 and 4-arm thiol-terminated polyethylene glycol [(PEGSH)4], resulting in a network containing a mixture of Au(I)-thiolate (Au-S) and disulfide bonds (SS). While the dynamic properties of the hydrogel were closely dependent on the pH, the mechanical properties could be easily tuned by adjusting (PEGSH)4 concentration and amount of Au-S, as judged by dynamic rheology studies. Permanent Au-S/SS exchange at physiological pH conferred self-healing behavior and frequency-dependent stiffness to the hydrogel. In addition, in vitro studies confirmed that Au-based dynamic material was not cytotoxic to human dermal fibroblasts, demonstrating its potential use as a medical device. Dynamic hydrogels obtained using Ag(I) ions demonstrated that the exchange reaction was not affected by the nature of the Metal(I) capping. Finally, this efficient thiolate capping strategy offers a simple way to produce injectable and self-healing dynamic hydrogels from virtually any thiol-containing polymers.

Self-Assembled Oleic Acid-Modified Polyallylamines for Improved siRNA Transfection Efficiency and Lower Cytotoxicity.

Small interference RNA (siRNA) is a tool for gene modulation, which can silence any gene involved in genetic disorders. The potential of this therapeutic tool is hampered by RNA instability in the blood stream and difficulties to reach the cytosol. Polyamine-based nanoparticles play an important role in gene delivery. Polyallylamine hydrochloride (PAH) is a polycation displaying primary amines that can be easily chemically modified to match the balance between cell viability and siRNA transfection. In this work, PAH has been covalently functionalized with oleic acid at different molar ratios by carbodiimide chemistry. The substituted polymers form polyplexes that keep positive surface charge and fully encapsulate siRNA. Oleic acid substitution improves cell viability in the pulmonary cell line A549. Moreover, 6 and 14% of oleic acid substitution show an improvement in siRNA transfection efficiency. CD47 is a ubiquitous protein which acts as "don't eat me signal." SIRPα protein of macrophages recognizes CD47, leading to tumor cell phagocytosis by macrophages. By knocking down CD47 with siRNA, cancer cells become vulnerable to be eliminated by the immune system. PAH-oleic acid substitutes show high efficacy in silencing the CD47 protein, making them a potential candidate for immunotherapy.

Design and fabrication of a microfluidic system with embedded circular channels for rotary cell culture.

The development of functional blood vessels is today a fundamental pillar in the evaluation of new therapies and diagnostic agents. This article describes the manufacture and subsequent functionalization, by means of cell culture, of a microfluidic device with a circular section. Its purpose is to simulate a blood vessel in order to test new treatments for pulmonary arterial hypertension. The manufacture was carried out using a process in which a wire with a circular section determines the dimensions of the channel. To fabricate the blood vessel, cells were seeded under rotary cell culture to obtain a homogeneous cell seeding in the inner wall of the devices. This is a simple and reproducible method that allows the generation of blood vessel models in vitro.

In vitro activity of novel apramycin-dextran nanoparticles and free apramycin against selected Dutch and Pakistani Klebsiella pneumonia isolates.

Klebsiella pneumoniae are bacteria associated with respiratory tract infections and are increasingly becoming resistant to antibiotics, including carbapenems. Apramycin is a veterinary antibiotic that may have the potential to be re-purposed for use in human health, for example, for the treatment of respiratory tract infections after coupling to inhalable nanoparticles. In the present study, the antibiotic apramycin was formulated with single chain polymeric nanoparticles and tested in free and formulated forms against a set of 13 Klebsiella pneumoniae isolates (from the Netherlands and Pakistan) expressing different aminoglycoside resistance phenotypes. Minimum Inhibitory Concentration, Time Kill Kinetics and biofilm experiments were performed providing evidence for the potential efficacy of apramycin and apramycin-based nanomedicines for the treatment of human Klebsiella pneumonia infections.

Polymer Colloids: Current Challenges, Emerging Applications, and New Developments.

Polymer colloids are complex materials that have the potential to be used in a vast array of applications. One of the main reasons for their continued growth in commercial use is the water-based emulsion polymerization process through which they are generally synthesized. This technique is not only highly efficient from an industrial point of view but also extremely versatile and permits the large-scale production of colloidal particles with controllable properties. In this perspective, we seek to highlight the central challenges in the synthesis and use of polymer colloids, with respect to both existing and emerging applications. We first address the challenges in the current production and application of polymer colloids, with a particular focus on the transition toward sustainable feedstocks and reduced environmental impact in their primary commercial applications. Later, we highlight the features that allow novel polymer colloids to be designed and applied in emerging application areas. Finally, we present recent approaches that have used the unique colloidal nature in unconventional processing techniques.

Neutralization of ionic interactions by dextran-based single-chain nanoparticles improves tobramycin diffusion into a mature biofilm.

The extracellular matrix protects biofilm cells by reducing diffusion of antimicrobials. Tobramycin is an antibiotic used extensively to treat P. aeruginosa biofilms, but it is sequestered in the biofilm periphery by the extracellular negative charge matrix and loses its efficacy significantly. Dispersal of the biofilm extracellular matrix with enzymes such as DNase I is another promising therapy that enhances antibiotic diffusion into the biofilm. Here, we combine the charge neutralization of tobramycin provided by dextran-based single-chain polymer nanoparticles (SCPNs) together with DNase I to break the biofilm matrix. Our study demonstrates that the SCPNs improve the activity of tobramycin and DNase I by neutralizing the ionic interactions that keep this antibiotic in the biofilm periphery. Moreover, the detailed effects and interactions of nanoformulations with extracellular matrix components were revealed through time-lapse imaging of the P. aeruginosa biofilms by laser scanning confocal microscopy with specific labeling of the different biofilm components.

Liquid marbles prepared from pH-responsive sterically stabilized latex particles.

Submicrometer-sized pH-responsive sterically stabilized polystyrene (PS) latex particles were synthesized by dispersion polymerization in isopropyl alcohol with a poly[2-(diethylamino)ethyl methacrylate]- (PDEA-) based macroinitiator. These PDEA-PS latexes were extensively characterized with respect to their particle size distribution, morphology, chemical composition, and pH-responsive behavior. Millimeter- and centimeter-sized "liquid marbles" with aqueous volumes varying between 15 µL and 2.0 mL were readily prepared by rolling water droplets on the dried PDEA-PS latex powder. The larger liquid marbles adopted nonspherical shapes due to gravitational forces; analysis of this deformation enabled the surface tension to be estimated. Scanning electron microscopy and fluorescence microscopy studies indicated that flocs of the PDEA-PS particles were adsorbed at the surface of these water droplets, leading to stable liquid marbles. The relative mechanical integrity of the liquid marbles prepared from alkaline aqueous solution (pH 10) was higher than those prepared from acidic aqueous solution (pH 2) as judged by droplet roller experiments. These liquid marbles exhibited long-term stability (over 1 h) when transferred onto the surface of liquid water, provided that the solution pH of the subphase was above pH 8. In contrast, the use of acidic solutions led to immediate disintegration of these liquid marbles within 10 min, with dispersal of the PDEA-PS latex particles in the aqueous solution. Thus the critical minimum solution pH required for long-term liquid marble stability correlates closely with the known pK(a) value of 7.3 for the PDEA stabilizer chains. Stable liquid marbles were also successfully prepared from aqueous Gellan gum solution and glycerol.

Interfacial activity of modified dextran polysaccharide to produce enzyme-responsive oil-in-water nanoemulsions.

Herein, we report the evaluation of dextran (DXT) derivatives bearing hydrophobic or hydrophilic functional groups as stabilisers of oil-in-water (O/W) emulsions. All investigated modifications conferred interfacial activity to produce stable O/W emulsions, methacrylate(MA)-functionalised DXT being the most promising stabiliser. A minimum amount of MA was required to obtain stable O/W nanoemulsions, which could be degraded in the presence of lipases.

A high molecular weight hyaluronic acid biphasic dispersion as potential therapeutics for interstitial cystitis.

Interstitial cystitis (IC) is a progressive bladder disease characterized by increased urothelial permeability, inflammation of the bladder with abdominal pain. While there is no consensus on the etiology of the disease, it was believed that restoring the barrier between urinary solutes and (GAG) urothelium would interrupt the progression of this disease. Currently, several treatment options include intravesical delivery of hyaluronic acid (HA) and/or chondroitin sulfate solutions, through a catheter to restore the urothelial barrier, but have shown limited success in preclinical, clinical trials. Herein we report for the first time successful engineering and characterization of biphasic system developed by combining cross-linked hyaluronic acid and naïve HA solution to decrease inflammation and permeability in an in vitro model of interstitial cystitis. The cross-linking of HA was performed by 4-arm-polyethyeleneamine chemistry. The HA formulations were tested for their viscoelastic properties and the effects on cell metabolism, inflammatory markers, and permeability. Our study demonstrates the therapeutic effects of different ratios of the biphasic system and reports their ability to increase the barrier effect by decreasing the permeability and alteration of cell metabolism with respect to relative controls. Restoring the barrier by using biphasic system of HA therapy may be a promising approach to IC.

Artificial Cornea: Past, Current, and Future Directions.

Corneal diseases are a leading cause of blindness with an estimated 10 million patients diagnosed with bilateral corneal blindness worldwide. Corneal transplantation is highly successful in low-risk patients with corneal blindness but often fails those with high-risk indications such as recurrent or chronic inflammatory disorders, history of glaucoma and herpetic infections, and those with neovascularisation of the host bed. Moreover, the need for donor corneas greatly exceeds the supply, especially in disadvantaged countries. Therefore, artificial and bio-mimetic corneas have been investigated for patients with indications that result in keratoplasty failure. Two long-lasting keratoprostheses with different indications, the Boston type-1 keratoprostheses and osteo-odonto-keratoprostheses have been adapted to minimise complications that have arisen over time. However, both utilise either autologous tissue or an allograft cornea to increase biointegration. To step away from the need for donor material, synthetic keratoprostheses with soft skirts have been introduced to increase biointegration between the device and native tissue. The AlphaCor™, a synthetic polymer (PHEMA) hydrogel, addressed certain complications of the previous versions of keratoprostheses but resulted in stromal melting and optic deposition. Efforts are being made towards creating synthetic keratoprostheses that emulate native corneas by the inclusion of biomolecules that support enhanced biointegration of the implant while reducing stromal melting and optic deposition. The field continues to shift towards more advanced bioengineering approaches to form replacement corneas. Certain biomolecules such as collagen are being investigated to create corneal substitutes, which can be used as the basis for bio-inks in 3D corneal bioprinting. Alternatively, decellularised corneas from mammalian sources have shown potential in replicating both the corneal composition and fibril architecture. This review will discuss the limitations of keratoplasty, milestones in the history of artificial corneal development, advancements in current artificial corneas, and future possibilities in this field.

Rheological behavior of acid-swellable cationic copolymer latexes.

2-Vinylpyridine (2VP) was copolymerized with four different cross-linker densities ranging from 0.05 to 0.31 wt % divinylbenzene (DVB) via aqueous emulsion polymerization to produce a series of submicrometer-sized, lightly cross-linked P2VP latexes. Protonation of the 2VP residues leads to a latex-to-microgel transition due to interchain electrostatic repulsion, as confirmed by dynamic light scattering. The DVB content of these pH-responsive copolymer particles strongly affects their rheological behavior. The particle size and viscosity of the swollen cationic microgels exhibit a maximum at approximately 0.11 wt % DVB. Static light scattering results confirm this density as the minimum amount of DVB required to ensure that all P2VP chains are cross-linked (i.e. that there is no soluble fraction), thus allowing optimal swelling of the microgels. Viscosity studies shows that the solution viscosity of a P2VP microgel at low pH follows two models, depending on its concentration. For volume fractions below 0.30, the P2VP microgels behave as hard spheres, as predicted by the Batchelor equation. For more concentrated P2VP microgels (volume fractions above 0.30), the rheological behavior can be predicted using the Krieger-Dougherty model for strong particle-particle interactions; thus, this semiempirical approach provides a useful description of the aqueous solution behavior of microgel.

Direct observation of pH-induced coalescence of latex-stabilized bubbles using high-speed video imaging.

The coalescence of pairs of 2 mm air bubbles grown in a dilute electrolyte solution containing a lightly cross-linked 380 nm diameter PEGMA-stabilized poly(2-vinylpyridine) (P2VP) latex was monitored using a high-speed video camera. The air bubbles were highly stable at pH 10 when coated with this latex, although coalescence could be induced by increasing the bubble volume when in contact. Conversely, coalescence was rapid when the bubbles were equilibrated at pH 2, since the latex undergoes a latex-to-microgel transition and the swollen microgel particles are no longer adsorbed at the air-water interface. Rapid coalescence was also observed for latex-coated bubbles equilibrated at pH 10 and then abruptly adjusted to pH 2. Time-dependent postrupture oscillations in the projected surface area of coalescing P2VP-coated bubble pairs were studied using a high-speed video camera in order to reinvestigate the rapid acid-induced catastrophic foam collapse previously reported [Dupin, D.; et al. J. Mater. Chem. 2008, 18, 545]. At pH 10, the P2VP latex particles adsorbed at the surface of coalescing bubbles reduce the oscillation frequency significantly. This is attributed to a close-packed latex monolayer, which increases the bubble stiffness and hence restricts surface deformation. The swollen P2VP microgel particles that are formed in acid also affected the coalescence dynamics. It was concluded that there was a high concentration of swollen microgel at the air-water interface, which created a localized, viscous surface gel layer that inhibited at least the first period of the surface area oscillation. Close comparison between latex-coated bubbles at pH 10 and those coated with 66 microm spherical glass beads indicated that the former system exhibits more elastic behavior. This was attributed to the compressibility of the latex monolayer on the bubble surface during coalescence. A comparable elastic response was observed for similar sized titania particles, suggesting that particle size is a significant factor in defining the interfacial elasticity of particle-coated bubbles.

COSAN-stabilised omega-3 oil-in-water nanoemulsions to prolong lung residence time for poorly water soluble drugs.

Herein, we report on the capacity of the amphiphilic inorganic anion cobalt bis(dicarbollide) to stabilise oil-in-water nanoemulsions (NEs). The resulting NEs show long term stability in water and high drug-loading capacity, and can prolong the residence time of hydrophobic drugs in the lungs as determined by in vivo positron emission tomography imaging.

Advanced nanomedicine characterization by DLS and AF4-UV-MALS: Application to a HIV nanovaccine.

Nanoformulations are complex systems where physicochemical properties determine their therapeutic efficacy and safety. In the case of nanovaccines, particle size and shape play a crucial role on the immune response generated. Furthermore, the antigen's integrity is also a key aspect to control when producing a nanovaccine. The determination of all those physicochemical properties is still an analytical challenge and the lack of well-established methods hinders the access of new therapeutics to the market. In this work, robust methods for the characterization of a novel HIV nanoparticle-based vaccine produced in good manufacturing practice (GMPs)-like environment were developed. With slightly polydisperse particles (< 0.2) close to 180 nm of size, batch-mode Dynamic Light Scattering (DLS) was validated to be used as a quality control technique in the pilot production plant. In addition, a high size resolution method using Asymmetrical Flow Field Flow Fractionation (AF4) demonstrated its ability to determine not only size and size distribution but also shape modification across the size and accurate quantification of the free active ingredient. Results showed a monomodal distribution of particles from 60 to 700 nm, most of them (> 90%) with size lower than 250 nm, consistent with more traditional techniques, and revealed a slight change in the structure of the particles induced by the presence of the antigen. Finally, a batch to batch variability lower than 20% was obtained by both DLS and AF4 methods indicating that preparation method was highly reproducible.

Technological challenges in the preclinical development of an HIV nanovaccine candidate.

Despite a very active research in the field of nanomedicine, only a few nano-based drug delivery systems have reached the market. The "death valley" between research and commercialization has been partially attributed to the limited characterization and reproducibility of the nanoformulations. Our group has previously reported the potential of a peptide-based nanovaccine candidate for the prevention of SIV infection in macaques. This vaccine candidate is composed of chitosan/dextran sulfate nanoparticles containing twelve SIV peptide antigens. The aim of this work was to rigorously characterize one of these nanoformulations containing a specific peptide, following a quality-by-design approach. The evaluation of the different quality attributes was performed by several complementary techniques, such as dynamic light scattering, nanoparticle tracking analysis, and electron microscopy for particle size characterization. The inter-batch reproducibility was validated by three independent laboratories. Finally, the long-term stability and scalability of the manufacturing technique were assessed. Overall, these data, together with the in vivo efficacy results obtained in macaques, underline the promise this new vaccine holds with regard to its translation to clinical trials. Graphical abstract.

Stimulus-responsive liquid marbles.

Millimeter-sized "liquid marbles" are usually prepared using highly hydrophobic particles such as fluorosilane-treated lycopodium powder or alkylated silica sols. In the present work it is shown that "liquid marbles" can be prepared using sterically stabilized polystyrene latex; remarkably, such latex particles can be readily prepared by aqueous emulsion polymerization using a well-defined styrene-functionalized poly(2-(diethylamino)ethyl methacrylate) macromonomer as a reactive steric stabilizer. The macromonomer stabilizer chains are water-soluble when partially protonated below their pK(a) of approximately 7.0 but become sufficiently hydrophobic in their deprotonated form to allow formation of robust "liquid marbles" that remain stable when placed at the air/water interface. Moreover, the stabilizer chains confer pH-responsive behavior on the "liquid marbles"; addition of acid to the aqueous subphase causes immediate destruction of the "liquid marble".