Eco-friendly simultaneous estimation of atenolol and losartan potassium in spiked human plasma via synchronous fluorescence with sustainability assessment.

A green, sensitive, and fast spectrofluorimetric technique for the simultaneous determination of atenolol (ATN) and losartan potassium (LSR) was developed. The proposed technique relied on the implementation of a first derivative synchronous fluorescence spectroscopy for the determination of the investigated drugs simultaneously without pretreatment procedures. The synchronous fluorescence of both drugs was measured in methanol at Δλ of 100 nm, and the first derivative peak amplitudes (1D) were measured at 321 nm for ATN and 348 nm for LSR, each at the zero-crossing point of the other. The method was rectilinear over the concentration ranges of 100-1000 ng/mL and 50-500 ng/mL for ATN and LSR, respectively. The proposed technique was successfully applied for the determination of the studied drugs in their laboratory-prepared mixture and pharmaceutical formulations, demonstrating high mean recoveries of 100.54% for ATN and 100.62% for LSR, without interference from common excipients. The results were in good agreement with those obtained by the comparison method. Three recent greenness assessment tools, the Eco-Scale tool, the Green Analytical Procedure Index (GAPI) metric, and the Analytical GREEnness metric approach, were employed to affirm the greenness of the proposed method. The developed method was proven to be eco-friendly.

A green micelle-enhanced first derivative synchronous fluorescence approach for determination of donepezil HCl and trazodone HCl in their pure state, pharmaceutical dosage form and spiked human plasma.

The study's objective is to establish an eco-friendly, sensitive and economical quantitative methodology for the concurrent analysis of donepezil HCl (DPZ) and trazodone HCl (TRZ) in raw materials, tablets and human plasma. The first derivative synchronous fluorescence spectroscopic (FDSFS) technique was applied at constant wavelength difference (∆λ = 120) for assessment of DPZ and TRZ at each other's zero-crossing point at 279 nm and 297 nm, respectively. The submitted technique was validated in accordance with ICH Q2 R1 guidelines and the linearity of the standard calibration curve was observed over the concentration range of 10-500 ng/ml for DPZ and 20-1,000 ng/ml for TRZ. The detection limits (LOD) were found to be 2.65 and 5.4 ng/ml, and the limits of quantitation (LOQ) were 8.05 and 16.3 ng/ml for DPZ and TRZ, respectively. This technique was used further to quantify the studied medications in their laboratory-prepared mixtures, commercial tablets and spiked plasma samples. The results obtained were not significantly different from those acquired from the comparison methods, indicating the high accuracy and precision of the proposed method. Furthermore, the ecological friendliness of the suggested method was evaluated and proven to be excellent using Green Analytical Procedure Index (GAPI) and Analytical GREEnness (AGREE) evaluation tools.

A sustainable sensitive spectrofluorimetric approach for the determination of the multipotent protein lactoferrin in different pharmaceuticals and infant milk formula: Compliance with greenness metrics.

The current study presents the first spectrofluorimetric approach for the estimation of lactoferrin, depending on the measurement of its native fluorescence at 337 nm after excitation at 230 nm, without the need for any hazardous chemicals or reagents. It was found that the fluorescence intensity versus concentration calibration plot was linear over the concentration range of 0.1-10.0 µg/mL with quantitation and detection limits of 0.082 and 0.027 µg/mL, respectively. The method was accordingly validated according to the ICH recommendations. The developed method was applied for the estimation of lactoferrin in different dosage forms, including capsules and sachets with high percent recoveries (97.84-102.53) and low %RSD values (<1.95). Lactoferrin is one of the key nutrients in milk powder and a significant nutritional fortifier. In order to assess the quality of milk powder, it is essential to rapidly and accurately quantify the lactoferrin content of the product. Therefore, the presented study was successfully applied for the selective estimation of lactoferrin in milk powder with acceptable percent recoveries (96.45-104.92) and %RSD values (≤3.607). Finally, the green profile of the method was estimated using two assessment tools: Green Analytical Procedure Index (GAPI) and Analytical GREEnness (AGREE), which demonstrated its excellent greenness.

Highly fluorescent nitrogen-doped carbon quantum dots prepared using sucrose and urea: Green synthesis, characterization, and use for determination of torsemide in its tablets and plasma samples.

A simple and facile microwave-assisted method was developed for the synthesis of highly fluorescent nitrogen-doped carbon quantum dots (N-CQDs) using sucrose and urea. The produced quantum dots exhibited a strong emission band at 376 nm after excitation at 216 nm with quantum yield of 0.57. The as-prepared N-CQDs were characterized using Fourier-transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM) images, and ultraviolet-visible (UV-visible) spectra. The average particle size was 7.7 nm. It was found that torsemide (TRS) caused an obvious quenching of the fluorescent N-CQDs; so, they were used for its spectrofluorometric estimation. An excellent linear correlation was found between the fluorescence quenching of N-CQDs and the concentration of the drug in the range of 0.10 to 1.0 µg/mL with limit of quantitation (LOQ) of 0.08 µg/mL and limit of detection (LOD) of 0.027 µg/mL. The method was successfully applied for the assay of the drug in its commercial tablets and spiked human plasma samples, and the results obtained were satisfactory. Complex GAPI was used for greenness assessment of the analytical procedures and the pre-analysis steps. Interference likely to be introduced from co-administered drugs was also studied.

Estimation of Two Diuretics Using Fluorescent Nitrogen Doped Carbon Quantum Dots: Application to Spiked Human Plasma and Tablets.

Highly fluorescent nitrogen doped carbon quantum dots (N-CQDs) were prepared by a single-step method based on microwave heating of cane sugar and urea. The produced N-CQDs were applied as nano-sensors for the spectrofluorimetric determination of eplerenone and spironolactone. A strong emission band at 376 nm was obtained after excitation at 216 nm due to the produced N-CQDs. The native fluorescence of N-CQDs was obviously quenched upon adding increased concentrations of each drug. A strong correlation was found between the fluorescence quenching of N-CQDs and the concentration of each drug. The method was found to be linear over the range of 0.5 to 5.0 µg/mL for eplerenone and 0.5 to 6.0 µg/mL for spironolactone with LOQ of 0.383 µg/mL and 0.262 µg/mL. The developed method was further extended for determination of both drugs in their pharmaceutical tablets and spiked human plasma. The results obtained were statistically compared with those of reported methods. The mechanism of fluorescence quenching of N-CQDs by the two drugs was discussed.

Utility of a xanthene-based dye for determination of nilotinib using two spectroscopic approaches. Applications to bulk powder, capsules, and spiked human plasma.

Novel, selective, facile, and precise spectroscopic approaches were validated to determine nilotinib hydrochloride, a tyrosine kinase inhibitor used to treat patients with chronic myeloid leukemia. These approaches depend on the reaction of the tertiary amine group of nilotinib with erythrosine B in the Britton-Robinson buffer at pH 4. Method I, depends on measuring the absorbance of the formed complex at 551 nm. The absorbance concentration plot showed linearity over the concentration range of 1.0 to 9.0 µg/ml. Method II, involved the measurement of the quenching of the native fluorescence of erythrosine B by adding nilotinib in an acidic medium. The fluorescence quenching of erythrosine B was measured at 549 nm after excitation at 528 nm. This approach showed excellent linearity in the concentration range of 0.04 to 0.7 µg/ml. The limit of detection values for Method I and Method II were 0.225 and 0.008 µg/ml, respectively, while the limit of quantitation values for Method I and Method II were 0.68 and 0.026 µg/ml, respectively. To get the optimal conditions, factors that may affect the formation of the ion-pairing complex were thoroughly examined. The two approaches were carefully validated following the International Conference of Harmonization (ICH Q2R1) guidelines. Statistical assessment of the results achieved using the suggested and previously published comparison approaches showed no significant difference. The approaches were successful in determining nilotinib in a pharmaceutical dosage form as well as spiked human plasma samples. The eco-friendly properties of the methods were evaluated by three different tools.

Two spectroscopic methods for estimation of anti-migraine medications: Sumatriptan and Zolmitriptan based on nucleophilic substitution reaction.

Sensitive and selective spectrophotometric and spectrofluorimetric methods have been developed for the estimation of two anti-migraine drugs, namely sumatriptan succinate (SUM) and zolmitriptan (ZOL). These methods depend on producing a yellow-coloured product after the reaction of the two drugs with 7-chloro-4-nitrobenz-2-oxa-1,3-diazole (NBD-Cl). The reaction products exhibited maximum absorbance at 481 nm in borate buffer of pH 9 and fluorescence emission peak at 540 nm after excitation at 470 nm for the two drugs. The linear ranges were 5-60 µg/ml for SUM and 5-50 µg/ml for ZOL in the spectrophotometric method (Method I), whereas this was 0.4-4 µg/ml for SUM and 0.5-5 µg/ml for ZOL in the spectrofluorimetric method (Method II). The method validity was assessed according to International Council for Harmonisation (ICH) guidelines. Statistical analysis of the results obtained from the proposed and comparison methods confirmed that the proposed methods were highly accurate and precise. The suggested methods could be used for the determination of the mentioned drugs in both pure form and in tablets.

Spectrofluorimetric investigation for determination of sumatriptan succinate: application to tablets and spiked human plasma.

A simple and highly sensitive spectrofluorimetric method for the estimation of sumatriptan succinate has been investigated. The suggested method depends on the determination of the intrinsic fluorescence properties of the drug in aqueous systems at λem 350 nm following λex at 225 nm. The linearity range was 10-100 ng/ml, with a detection limit and quantitation limit of 1.2 and 3.6 ng/ml, respectively. The suggested method was sufficiently successful for determination of sumatriptan its pharmaceutical tablets as well as in spiked human plasma. Moreover, the validation parameters were determined following International Council for Harmonisation guidelines. Statistical analysis of the obtained results from the proposed and reference methods showed no significance difference between the two methods regarding accuracy and precision.

Digitally enhanced thin layer chromatography for simultaneous determination of norfloxacin and tinidazole with the aid of Taguchi orthogonal array and desirability function approach: Greenness assessment by analytical Eco-Scale.

In this study, an eco-friendly fast simple method was developed for simultaneous determination of norfloxacin and tinidazole based on thin-layer chromatography and image-processing analysis. The binary mixture was separated using reversed phase - thin layer chromatography plates and 30% trifluoroacetic acid only as mobile phase. Mobile phase composition was optimized using Taguchi orthogonal array and Derringer's desirability function. The plates were viewed under UV lamp and photographed by iPhone camera followed by image processing with Fiji software using integrated density as the measured response. As decreasing illumination increases the sensitivity of the method, this method was applied on two different ranges for each drug. The first one was 0.6-6.0 and 0.9-9.0 µg/spot for norfloxacin and tinidazole, respectively measured on the original image with normal illumination. The second one was measured after decreasing the illumination of the captured images at 0.06-0.60 and 0.09-0.90 µg/spot for norfloxacin and tinidazole, respectively. The proposed method was successfully applied for the determination of both drugs in tablets dosage form without interference from the commonly encountered excipients. Analytical Eco-Scale was used to evaluate the greenness profile of the proposed method and it was found to be excellent green analytical method.

Two validated spectrofluorimeteric and high performance liquid chromatography (HPLC) methods with fluorescence detection for the analysis of a new anti-hepatitis C drug, daclatasvir hydrochloride, in raw material or tablet form and in biological fluids.

Two sensitive and accurate methods have been developed for the estimation of daclatasvir (DAC) in its raw material, dosage form and in biological fluids. Method I is based on the measurement of DAC native fluorescence in methanol at 385 nm after excitation at 315 nm. The relationship between fluorescence intensity and concentration was found to be rectilinear over the linearity range (3.0-30.0 ng/ml). There were good per cent recoveries both in the dosage form (99.87 ± 0.84) and in spiked human plasma (99.96 ± 1.54%). Method II utilized reversed-phase high performance liquid chromatography to estimate the antiviral agent daclatasvir hydrochloride against hepatitis C within 4.0 min on a C18 column (Eurosphere. 100-5 C18, 150 × 4.6 mm, Germany) using a mobile phase consisting of acetonitrile and 0.1 M sodium dihydrogen phosphate (30:70, v/v) at pH 3.0 and with a fluorescence detector adjusted to 315 nm and 385 nm for excitation and emission respectively. The calibration curve was linear over the range (20.0-200.0 ng/ml) with SD 1.38%, error 0.56%, recovery 99.99 ± 1.30% in tablets, recovery 100.28 ± 1.73% in spiked urine and recovery 99.63 ± 2.72% in spiked plasma.The new developed methods were successfully applied to the assay of the daclatasvir in tablet form and extended to its determination in real plasma, spiked human plasma and urine. The analytical performance of the proposed method was validated according to International Conference on Harmonization (ICH) guidelines. The proposed methods were compared with the results of a comparison method and it was found that there was no significant difference between the methods, as revealed by Student's t-test and variance ratio F-test.

Validated spectrofluorimetric method for the determination of clonazepam in pharmaceutical preparations.

A simple, highly sensitive and validated spectrofluorimetric method was applied in the determination of clonazepam (CLZ). The method is based on reduction of the nitro group of clonazepam with zinc/CaCl2, and the product is then reacted with 2-cyanoacetamide (2-CNA) in the presence of ammonia (25%) yielding a highly fluorescent product. The produced fluorophore exhibits strong fluorescence intensity at ʎ(em) = 383 nm after excitation at ʎ(ex) = 333 nm. The method was rectilinear over a concentration range of 0.1-0.5 ng/mL with a limit of detection (LOD) of 0.0057 ng/mL and a limit of quantification (LOQ) of 0.017 ng/mL. The method was fully validated and successfully applied to the determination of CLZ in its tablets with a mean percentage recovery of 100.10 ± 0.75%. Method validation according to ICH Guidelines was evaluated. Statistical analysis of the results obtained using the proposed method was successfully compared with those obtained using a reference method, and there was no significance difference between the two methods in terms of accuracy and precision.

A green capillary zone electrophoresis method for the simultaneous determination of piperacillin, tazobactam and cefepime in pharmaceutical formulations and human plasma.

A green, novel, rapid, accurate and reliable capillary zone electrophoresis method was developed and validated for the simultaneous determination of piperacillin, tazobactam and cefepime in pharmaceutical preparations. Separation was carried out using fused silica capillary (50 µm i.d. × 48.6 cm and 40.2 cm detection length) and applied potential of 20 kV (positive polarity) and a running buffer containing 15 m m sodium borate buffer adjusted to pH 9.3 with UV detection at 215 nm. Amoxicillin was used as an internal standard. The method was suitably validated according to International Conference on Harmonization guidelines. The method showed good linearity in the ranges of 10-100, 20-400 and 10-400 µg/mL with limits of quantitation of 1.87, 3.17 and 6.97 µg/mL and limits of detection of 0.56, 0.95 and 2.09 µg/mL for tazobactam, piperacillin and cefepime, respectively. The proposed method was successfully applied for the analysis of these drugs in their synthetic mixtures and co-formulated injection vials. The method was extended to the in vitro determination of the two drugs in spiked human plasma. It is considered a 'green' method as it consumes no organic solvents.

Validated spectrofluorimetric method for the determination of carbamazepine in pharmaceutical dosage forms after reaction with 4-chloro-7--nitrobenzo-2-oxa-1,3-diazole (NBD-Cl).

A sensitive and simple spectrofluorimetric method has been developed and validated for the determination of the anti-epileptic drug carbamazepine (CBZ) in its dosage forms. The method was based on a nucleophilic substitution reaction of CBZ with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl) in borate buffer (pH 9) to form a highly fluorescent derivative that was measured at 530 nm after excitation at 460 nm. Factors affecting the formation of the reaction product were studied and optimized, and the reaction mechanism was postulated. The fluorescence-concentration plot is rectilinear over the range of 0.6-8 µg/mL with limit of detection of 0.06 µg/mL and limit of quantitation of 0.19 µg/mL. The method was applied to the analysis of commercial tablets and the results were in good agreement with those obtained using the reference method. Validation of the analytical procedures was evaluated according to ICH guidelines.

Simultaneous determination of aliskiren hemifumarate, amlodipine besylate, and hydrochlorothiazide in their triple mixture dosage form by capillary zone electrophoresis.

A novel, specific, reliable, and accurate capillary zone electrophoretic method was developed and validated for the simultaneous determination of aliskiren hemifumarate, amlodipine besylate, and hydrochlorothiazide in their triple mixture dosage form. Separation was carried out in a fused-silica capillary (57.0 cm total length and 50.0 cm effective length, 75.6 µm internal diameter) by applying a potential of 17 kV and a running buffer consisting of 40 mM phosphate buffer at pH 6.0 with UV detection at 245 nm. The method was suitably validated with respect to specificity, linearity, LOD, and LOQ, accuracy, precision, and robustness. The method showed good linearity in the ranges 1-10, 2.5-25, and 30-300 µg/mL with LODs of 0.11, 0.33, and 5.83 µg/mL for amlodipine besylate, hydrochlorothiazide, and aliskiren hemifumarate, respectively. The proposed method was successfully applied for the analysis of the studied drugs in their coformulated tablets. The results of the proposed method were statistically compared with those obtained by the RP-HPLC reference method revealing no significant differences in the performance of the methods regarding accuracy and precision.

Simultaneous determination of metolazone and losartan potassium in their binary mixtures using high-performance liquid chromatography with fluorimetric detection: application to combined tablets and spiked human plasma.

A new, specific and sensitive reversed-phase high-performance liquid chromatography method was developed for the simultaneous determination of metolazone (MET) and losartan potassium (LOS). Good chromatographic separation was achieved within 6.0 min on a 150 × 4.6 mm i.d., 5 µm Waters, Ireland and ProDIGY 5 ODS 3 100 A column. A mobile phase containing a mixture of methanol and 0.02 M phosphate buffer (65:35, v/v) at pH 3.0 was used. The analysis was performed at a flow rate of 1 mL/min with fluorescence detection at 410 nm after excitation at 230 nm. Aspirin (ASP) was used as an internal standard. The proposed method was rectilinear over 2.0-40.0 (MET) and 40.0-800.0 ng/mL (LOS), with limits of detection of 0.22 and 4.52 ng/mL and limits of quantification of 0.68 and 13.70 ng/mL for MET and LOS, respectively. The method was successfully applied for the simultaneous analysis of the studied drugs in their laboratory-prepared mixtures, single tablets and co-formulated tablets. Moreover, the method was applied to an in vitro drug release (dissolution) test. The method was further extended to the determination of LOS in spiked human plasma. Statistical evaluation and comparison of data obtained using the proposed and comparison methods revealed no significant difference between the two methods in addition to good accuracy and precision for the proposed method.

Investigation of green synchronous spectrofluorimetric approach for facile sensitive estimation of two co-administered anti-cancer drugs; curcumin and doxorubicin in their laboratory-prepared mixtures, human plasma, and urine.

Recently, phytochemicals play an important role in cancer management. Curcumin (CUR), a natural phytochemical, has been co-administered with widespread chemotherapeutic agents such as doxorubicin (DOX) due to its excellent antitumor activity and the ability to lower the adverse reactions and drug resistance cells associated with DOX use. The present study aims to determine DOX and CUR utilizing a label-free, selective, sensitive, and precise synchronous spectrofluorimetric method. The obvious overlap between the emission spectra of DOX and CUR prevents simultaneous estimation of both analytes by conventional spectrofluorimetry. To solve such a problem, synchronous spectrofluorimetric measurements were recorded at Δλ = 20 nm, utilizing ethanol as a diluting solvent. Curcumin was recorded at 442.5 nm, whereas DOX was estimated at 571.5 nm, each at the zero-crossing point of the other one. The developed method exhibited linearity over a concentration range of 0.04-0.40 µg/mL for CUR and 0.05-0.50 µg/mL for DOX, respectively. The values of limit of detection (LOD) were 0.009 and 0.012 µg/mL, while the values of limit of quantitation (LOQ) were 0.028 and 0.037 µg/mL for CUR and DOX, respectively. The adopted approach was carefully validated according to the guidelines of ICH Q2R1. The method was utilized to estimate CUR and DOX in laboratory-prepared mixtures and human biological matrices. It showed a high percentage of recoveries with minimal RSD values. Additionally, three different tools were utilized to evaluate the greenness of the proposed approach.

An eco-friendly and cost-effective HPTLC method for quantification of COVID-19 antiviral drug and co-administered medications in spiked human plasma.

The coronavirus-2 has led to a global pandemic of COVID-19 with an outbreak of severe acute respiratory syndrome leading to worldwide quarantine measures and a rise in death rates. The objective of this study is to propose a green, sensitive, and selective densitometric method to simultaneously quantify remdesivir (REM) in the presence of the co-administered drug linezolid (LNZ) and rivaroxaban (RIV) in spiked human plasma. TLC silica gel aluminum plates 60 F254 were used as the stationary phase, and the mobile phase was composed of dichloromethane (DCM): acetone (8.5:1.5, v/v) with densitometric detection at 254 nm. Well-resolved peaks have been observed with retardation factors (Rf) of 0.23, 0.53, and 0.72 for REM, LNZ, and RIV, respectively. A validation study was conducted according to ICH Q2 (R1) Guidelines. The method was rectilinear over the concentration ranges of 0.2-5.5 µg/band, 0.2-4.5 µg/band and 0.1-3.0 µg/band for REM, LNZ and RIV, respectively. The sensitivities of REM, LIN, and RIV were outstanding, with quantitation limits of 128.8, 50.5, and 55.8 ng/band, respectively. The approach has shown outstanding recoveries ranging from 98.3 to 101.2% when applied to pharmaceutical formulations and spiked human plasma. The method's greenness was assessed using Analytical Eco-scale, GAPI, and AGREE metrics.

Simultaneous determination of floctafenine and its hydrolytic degradation product floctafenic acid using micellar liquid chromatography with applications to tablets and human plasma.

A stability-indicating micellar liquid chromatography (MLC) method was developed and validated for the assay of floctafenine (FLF) in the presence of its degradation product and main metabolite, floctafenic acid (FLA). The analysis was carried out on a CLC Shim-Pack octyl silane (C8) column (150 x 4.6 mm id, 5 microm particle size) using a micellar mobile phase consisting of 0.15 M sodium dodecyl sulfate, 10% n-propanol, and 0.3% triethylamine in 0.02 M orthophosphoric acid (pH = 3). The mobile phase was pumped at a flow rate of 1.0 mL/min with UV detection at 360 nm. The method showed good linearity for FLF and FLA over the concentration ranges of 0.5-25.0 and 0.4-10.0 microg/mL, with LODs of 0.16 and 0.12 microg/mL, respectively. The developed method was successfully applied to the determination of FLF in commercial dispersible tablets, with mean recovery of 98.87 +/- 1.37%. Also, the proposed method was specific for the analysis of FLF in presence of the co-formulated drug thiocolchicoside in laboratory-prepared tablets, with mean recovery of 100.50 +/- 1.07%. Statistical comparison of the results obtained by the proposed MLC method with those obtained by a comparison method showed good agreement. Moreover, the method was extended to study the degradation behavior of FLF under different International Conference on Harmonization recommended conditions such as alkaline, acidic, oxidative, thermal, and photolytic. The method was further applied for direct determination of FLA as the main metabolite of FLF in human plasma without prior extraction steps, with mean recovery of 110.50 +/- 6.5%.

Investigation of facile spectroscopic approaches for rapid calycosin determination in invitro biological samples and pharmaceuticals; application to the content uniformity of capsules.

Calycosin, the major bioactive isoflavonoid inAstragali Radix and an important anti-viral drug with a variety of pharmacological actions, is being determined by five different spectroscopic methods. Two spectrophotometric methods have been investigated including measuring the absorption spectra at λmax = 270 nm and the first derivative spectra at λ = 288 nm for methods I and II, respectively. For the first time; the native fluorescence of calycosin is measured without adding any reagents. The fluorescence intensity was measured at 340 nm after excitation at 282 nm in method III. The fourth method involves the direct measuring of a first derivative spectrofluorimetric emission peak at 292 nm. In method V synchronous fluorescence spectra were recorded in methanol at Δλ = 70 nm. The linear range for the fluorescence-based methods was 0.05-1.0 µg/mL and for the UV-based methods was 0.5-10.0 µg/mL. The methods were validated per International Council of Harmonization (ICHQ2R1) guidelines. The limits of detection were found to be down to 0.11 and 0.12 µg/mL for the spectrophotometric methods, and 15.0, 18.0,16.0 ng/ mL, for the spectrofluorimetric approaches respectively, representing the high sensitivity. Accordingly, this permitted the quantitation of calycosin in spiked human plasma samples with satisfactory percentage recoveries (94.50.-102.50 %). The methods were utilized for calycosin analysis in different matrices including plasma and capsules with high precision and accuracy.

Spectrofluorometric determination of cinacalcet hydrochloride: greenness assessment and application to biological fluids andin-vitrodissolution testing.

A facile, simple, green and sensitive spectrofluorometric method was developed for determination of the calcimimetic drug cinacalcet hydrochloride. It is used for the treatment of hyperparathyroidism. The drug showed high native fluorescence intensity at 320 nm after excitation at 280 nm. The method was linear over the range of 5.0-400.0 ng ml-1with excellent correlation (R2= 0.9999). Limit of detection (LOD) and limit of quantitation (LOQ) values were 1.19 and 3.62 ng ml-1, respectively. The percentage recovery was found to be 100.42% ± 1.39 (n=8). The proposed method was successfully applied for determination of cinacalcet in spiked human plasma samples with % recoveries of (87.23 to 109.69%). Two recent greenness metrics (GAPI and Analytical Eco-Scale) were chosen to prove the eco-friendly nature of the method. Furthermore, the proposed method was successfully applied to dissolution study of commercial cinacalcet tablets. The interference likely to be introduced by some commonly co-administrated drugs such as metoprolol and itraconazole was studied; the tolerance limits were calculated.