Discovery of circulating blood biomarkers in patients with and without Modic changes of the lumbar spine: a preliminary analysis.

PURPOSE: The following study aimed to determine the existence of blood biomarkers in symptomatic patients with or without lumbar Modic changes (MC). METHODS: A cross-sectional sub-analyses of a prospective cohort was performed. Fasting blood samples were collected from patients with and without lumbar MC who had undergone spinal fusion or microdiscectomy. An 80-plex panel and CCL5/RANTES were used to assess preoperative plasma cytokine concentrations. Patient demographics and imaging phenotypes were also assessed. RESULTS: Thirty-one subjects were analysed (n = 18 no MC; n = 13 MC). No significant differences were found in age, sex, body mass index, smoking and alcohol history, and surgical procedure (i.e. fusion, decompression) between the two groups (p > 0.05). Several statistically significant blood biomarkers in MC patients were identified, including elevated levels of C-C Motif Chemokine Ligand 5 (CCL5, p = 0.0006), while Macrophage Migration Inhibitory Factor (MIF) was significantly lower (p = 0.009). Additionally, C-X-C Motif Chemokine Ligand 5 (CXCL5, p = 0.052), Pentraxin 3 (PTX3, p = 0.06) and Galectin-3 (Gal-3, p = 0.07) showed potential relevance. Moreover, MC patients exhibited significantly higher levels of disc degeneration (p = 0.0001) and displacement severity (p = 0.020). Based on multivariate analyses and controlling for disc degeneration/displacement, CCL5 (OR 1.02; 95% CI 1.002-1.033; p = 0.028) and MIF (OR 0.60; 95% CI 0.382-0.951; p = 0.030) were independently associated with MC patients. CONCLUSION: This "proof-of-concept" study is the first to identify specific and significantly circulating blood biomarkers associated with symptomatic patients with lumbar MC, independent of disc alterations of degeneration and/or bulges/herniations. Specifically, differences in CCL5 and MIF protein levels were significantly noted in MC patients compared to those without MC.

3-dimensionally printed patient-specific glenoid drill guides vs. standard nonspecific instrumentation: a randomized controlled trial comparing the accuracy of glenoid component placement in anatomic total shoulder arthroplasty.

BACKGROUND: Traditional, commercially sourced patient-specific instrumentation (PSI) systems for shoulder arthroplasty improve glenoid component placement but can involve considerable cost and outsourcing delays. The purpose of this randomized controlled trial was to compare the accuracy of glenoid component positioning in anatomic total shoulder arthroplasty (aTSA) using an in-house, point-of-care, 3-dimensionally (3D) printed patient-specific glenoid drill guide vs. standard nonspecific instrumentation. METHODS: This single-center randomized controlled trial included 36 adult patients undergoing primary aTSA. Patients were blinded and randomized 1:1 to either the PSI or the standard aTSA guide groups. The primary endpoint was the accuracy of glenoid component placement (version and inclination), which was determined using a metal-suppression computed tomography scan taken between 6 weeks and 1 year postoperatively. Deviation from the preoperative 3D templating plan was calculated for each patient. Blinded postoperative computed tomography measurements were performed by a fellowship-trained shoulder surgeon and a musculoskeletal radiologist. RESULTS: Nineteen patients were randomized to the patient-specific glenoid drill guide group, and 17 patients were allocated to the standard instrumentation control group. There were no significant differences between the 2 groups for native version (P = .527) or inclination (P = .415). The version correction was similar between the 2 groups (P = .551), and the PSI group was significantly more accurate when correcting version than the control group (P = .042). The PSI group required a significantly greater inclination correction than the control group (P = .002); however, the 2 groups still had similar accuracy when correcting inclination (P = .851). For the PSI group, there was no correlation between the accuracy of component placement and native version, native inclination, or the Walch classification of glenoid wear (P > .05). For the control group, accuracy when correcting version was inversely correlated with native version (P = .033), but accuracy was not correlated with native inclination or the Walch classification of glenoid wear (P > .05). The intraclass correlation coefficient was 0.703 and 0.848 when measuring version and inclination accuracy, respectively. CONCLUSION: When compared with standard instrumentation, the use of in-house, 3D printed, patient-specific glenoid drill guides during aTSA led to more accurate glenoid component version correction and similarly accurate inclination correction. Additional research should examine the influence of proper component position and use of PSI on clinical outcomes.

Spontaneous Closure of Congenital Cranial Defect: Is Early Surgical Intervention Warranted?

Infantile cranial development typically occurs in a predictable sequence of events; however, less is known about how the development occurs in isolated, nonsyndromic congenital craniofacial anomalies. Furthermore, the timing of pediatric cranioplasty has been extrapolated from adult studies. Thus, the management of nonsyndromic congenital craniofacial anomalies presents with unique challenges to the craniofacial surgeon. The authors describe the case of a baby girl who was born with right Tessier 3 cleft, cleft palate, anophthalmos, and severe left craniofacial microsomia with Pruzansky grade III left mandibular anomaly. By analyzing 3-dimensional chronological models of the patient, the authors found that her abnormal fontanelle initially increased in size until 22 weeks of age, with subsequent spontaneous closure at a rate of 60.53 mm2/y. Although similar cranial anomalies are typically surgically corrected early in life, delaying treatment until after 2 years of age may be appropriate in some patients, obviating surgical morbidity in the newborn period.

ISSLS PRIZE in Clinical Science 2022: Epidemiology, risk factors and clinical impact of juvenile Modic changes in paediatric patients with low back pain.

PURPOSE: It's a long-held belief that Modic changes (MC) occur only in adults, with advanced age, and are highly associated with pain and adverse outcomes. The following study addressed the epidemiology, risk factors and clinical relevance of MC in young paediatric patients. METHODS: Two hundred and seven consecutive patients with no history of deformities, neoplasms, trauma, or infections were included in this ambispective study. MRIs were utilized to assess MCs and types, and other degenerative disc/endplate abnormalities. Subject demographics, duration of symptoms, clinic visits, conservative management (physical therapy, NSAIDs, opioids, injections) and surgery were noted. RESULTS: The mean age was 16.5 years old (46.9% males), 14% had MCs and they occurred throughout the spine. Subject baseline demographics were similar between MCs and non-MCs patients (p > 0.05). Modic type 2 (50%) was the most common type (type 1:27.1%; type 3:18.8%; mixed:4.7%). Multivariate analyses noted that endplate damage (OR: 11.36), disc degeneration (OR: 5.81), disc space narrowing (OR: 5.77), Schmorl's nodes (OR: 4.30) and spondylolisthesis (OR: 3.55) to be significantly associated with MCs (p < 0.05). No significant differences in conservative management were noted between Modic and non-MCs patients (p > 0.05). Among surgery patients (n = 44), 21% also had MCs (p = 0.134). Symptom-duration was significantly greater in MC patients (p = 0.049). CONCLUSION: Contrary to traditional dogma, robust evidence now exists noting that MCs and their types can develop in children. Our findings give credence to the "Juvenile" variant of MCs, whereby its implications throughout the lifespan need to be assessed. Juvenile MCs have prolonged symptoms and related to specific structural spine phenotypes.

Artificial intelligence and spine imaging: limitations, regulatory issues and future direction.

BACKGROUND: As big data and artificial intelligence (AI) in spine care, and medicine as a whole, continue to be at the forefront of research, careful consideration to the quality and techniques utilized is necessary. Predictive modeling, data science, and deep analytics have taken center stage. Within that space, AI and machine learning (ML) approaches toward the use of spine imaging have gathered considerable attention in the past decade. Although several benefits of such applications exist, limitations are also present and need to be considered. PURPOSE: The following narrative review presents the current status of AI, in particular, ML, with special regard to imaging studies, in the field of spinal research. METHODS: A multi-database assessment of the literature was conducted up to September 1, 2021, that addressed AI as it related to imaging of the spine. Articles written in English were selected and critically assessed. RESULTS: Overall, the review discussed the limitations, data quality and applications of ML models in the context of spine imaging. In particular, we addressed the data quality and ML algorithms in spine imaging research by describing preliminary results from a widely accessible imaging algorithm that is currently available for spine specialists to reference for information on severity of spine disease and degeneration which ultimately may alter clinical decision-making. In addition, awareness of the current, under-recognized regulation surrounding the execution of ML for spine imaging was raised. CONCLUSIONS: Recommendations were provided for conducting high-quality, standardized AI applications for spine imaging.

Lumbar facet joint subchondral bone density in low back pain and asymptomatic subjects.

OBJECTIVE: To report in vivo measurements of lumbar facet joint subchondral bone mineral density used in the description of facet joint loading patterns and to interrogate if low back pain is associated with changes in subchondral bone mineral density. MATERIALS AND METHODS: In vivo measurements of lumbar facet joint subchondral bone mineral density (L1/2 to L5/S1) in Hounsfield units were performed on 89 volunteers (56 controls and 33 with low back pain) by computed tomography osteoabsorptiometry at subchondral regions between 1.5 mm and 2.5 mm below the joint surface. The facet surface was divided into five topographic zones: cranial, lateral, caudal, medial, and central. RESULTS: We analyzed 1780 facet joint surfaces. Facets were denser (p < 0.0001) both in superior facets and in low back pain subjects (p < 0.0001). For the entire cohort, the facet center zone subchondral bone mineral density was higher (p < 0.0001) than that of the peripheral zones. The analyses indicate that subchondral bone mineral density is highest in patients with low back pain, the superior facets, and the center zone of the facets. CONCLUSIONS: Subchondral bone mineral density is thought to reflect cumulative, long-term distribution of stress acting on a joint. This work shows that higher subchondral bone mineral density values in the center zone indicate predominant stress transmission through the center of the facet joints. Finally, the greater subchondral bone mineral density in patients with low back pain may reflect both increased load bearing by the facets secondary to disc degeneration and misdistribution of loading within the joint.

Computed Tomography-Based Three-Dimensional Analyses Show Similarities in Anterosuperior Acetabular Coverage Between Acetabular Dysplasia and Borderline Dysplasia.

PURPOSE: (1) To compare the acetabular coverage between dysplasia, borderline dysplasia, and control acetabulum in a quantitative 3-dimensional manner; and (2) to evaluate correlations between the radiologic parameters and the 3-dimensional zonal-acetabular coverage. METHODS: We reviewed contralateral hip computed tomography images of patients 16 to 60 years of age who underwent 1 of 3 types of surgeries: eccentric rotational acetabular osteotomy, curved intertrochanteric varus osteotomy, and total hip replacement with minimum 1-year follow-up from January 2013 to April 2018. A point-cloud model of the acetabulum created from computed tomography was divided into 6 zones. Three-dimensional acetabular coverage was measured radially at intervals of 1°. Mean radial acetabular coverage for each zone was named ZAC (zonal acetabular coverage) and was compared among the 3 subgroups (control: 25° ≤lateral center-edge angle [LCEA] <40°; borderline: 20° ≤LCEA <25°; and dysplasia: LCEA ≤20°) statistically. Further, the correlations between the ZAC in each zone and the LCEA were analyzed using Pearson's correlation coefficient. RESULTS: One-hundred fifteen hips were categorized as control (36 hips), borderline (32 hips), and dysplasia (47 hips). The mean anterocranial ZAC in the borderline (87.5 ± 5.7°) was smaller than that in the control (92.6 ± 5.9°, P = .005) but did not differ compared with the dysplasia (84.5 ± 7.6°, P = .131). In contrast, the anterocaudal (71.2 ± 5.0°), posterocranial (85.0 ± 6.4°), and posterocaudal (82.4 ± 4.5°) mean ZACs in the borderline were not different from those in the control (anterocaudal, 74.3 ± 4.6°, P = .090; posterocranial, 87.9 ± 4.3°, P = .082; posterocaudal, 85.1 ± 5.0°, P = .069) respectively. Although there was a very strong positive correlation with supra-anterior ZAC and LCEA (r = 0.750, P < .001), the correlation between the anterocranial ZAC and LCEA was relatively weak (r = 0.574, P < .001). CONCLUSIONS: The anterosuperior acetabular coverage in the borderline dysplastic acetabulum is more similar to the dysplastic acetabulum than to the normal acetabulum. CLINICAL RELEVANCE: This study emphasizes the importance of evaluating not only the lateral but also the anterior coverage in borderline dysplasia.

Spatial geometric and magnetic resonance signal intensity changes with advancing stages of nucleus pulposus degeneration.

BACKGROUND: With advancing stages of degeneration, denaturation and degradation of proteoglycans in the nucleus pulposus (NP) lead to tissue dehydration and signal intensity loss on T2-weighted MR images. Pfirrmann grading is widely used for grading degeneration of intervertebral discs (IVDs). The criterion to differentiate IVDs of Pfirrmann Grade I from the other grades is NP homogeneity. Pfirrmann grading is qualitative and its assessment may be subjective. Therefore, assessment of quantitative objective measures correlating with early disc degeneration may complement the grading. This study aimed to evaluate the applicability of the distance between the center weighted by signal intensity (weighted center) and the geometric center as a parameter of NP homogeneity. Other phenomena related to advancing stages of degeneration were also investigated. METHODS: MR images of 65 asymptomatic volunteers with a total of 288 lumbar IVDs with clearly identifiable nucleus pulposus boundary (Pfirrmann Grade I, II and III) were included in this study. A custom-written program was developed to determine the IVD longitudinal axis, define the NP boundary, and to locate the coordinates of geometric and weighted NP centers on the mid-sagittal image of each studied IVD. The distances between the weighted and geometric centers on the longitudinal axis and the perpendicular axis of each IVD were calculated. RESULTS: The weighted center located posterior to the geometric center, which indicated the signal intensity was lower at the anterior portion of the NP, in 85.8% of studied IVDs. The distance between the weighted and geometric center on the longitudinal axis was significantly shorter in homogeneous (Pfirrmann Grade I) than in inhomogeneous (Grade II) IVDs. The distance on the perpendicular axis in Grade III IVDs was significantly larger than that in Grade I and Grade II IVDs. CONCLUSION: The relationship between the weighted and geometric centers can serve as an indicator for NP homogeneity. The distance between both centers through advancing stages of degeneration demonstrated decrease of signal intensity progressing along the longitudinal axis initially and then along the cranio-caudal direction at later stages. These findings could provide insights of initiation and subsequent progression of degenerative changes in IVDs.

Capsulotomy Size Affects Hip Joint Kinematic Stability.

PURPOSE: To evaluate the effect of capsulotomy size and subsequent repair on the biomechanical stability of hip joint kinematics through external rotation of a cadaveric hip in neutral flexion. METHODS: Eight fresh-frozen cadaveric hip specimens were used in this study. Each hip was tested under torsional loads of 6 N·m applied by a servohydraulic frame and transmitted by a pulley system. The test conditions were (1) neutral flexion with the capsule intact, (2) neutral flexion with a 4-cm interportal capsulotomy, (3) neutral flexion with a 6-cm capsulotomy, and (4) neutral flexion with capsulotomy repair. Soft tissue was retained during all interventions. Measures indicating joint kinematics (range of motion [ROM], hysteresis area [HA], and neutral zone [NZ]) were obtained for each condition. RESULTS: For all hip specimens, the average ROM, HA, and NZ were calculated relative to the intact capsular state (100%) and expressed in terms of percentage (± SD). The findings for ROM were as follows: intact, 100%; 4 cm, 107.42% ± 5.69%; 6 cm, 113.40% ± 7.92%; and repair, 99.78% ± 3.77%. The findings for HA were as follows: intact, 100%; 4 cm, 108.30% ± 9.30%; 6 cm, 115.30% ± 13.92%; and repair, 99.47% ± 4.12%. The findings for NZ were as follows: intact, 100%; 4 cm, 139.61% ± 62.35%; 6 cm, 169.25% ± 78.19%; and repair, 132.03% ± 64.38%. Statistically significant differences in ROM existed between the intact and 4-cm conditions (P = .039), the intact and 6-cm conditions (P < .0001), the 4-cm and repair conditions (P = .033), and the 6-cm and repair conditions (P < .0001). There was no statistically significant difference between the intact and repair conditions (P > .99) or between the 4- and 6-cm conditions (P = .126). CONCLUSIONS: Under laboratory-based conditions, larger-sized capsulotomies were accompanied by increases in all 3 measures of joint mobility: ROM, HA, and NZ at time zero. Complete capsular closure effectively restored these measures when compared with the intact condition. CLINICAL RELEVANCE: Cadaveric models consisting of the hip joint with surrounding soft tissue were used under laboratory testing conditions to investigate potential iatrogenic joint instability resulting from expansive capsulotomies, showing that complete capsular closure leads to reconstitution of original joint stability properties at time zero.

Effects of Axial Torsion on Disc Height Distribution: An In Vivo Study.

OBJECTIVES: Axial rotation of the torso is commonly used during manipulation treatment of low back pain. Little is known about the effect of these positions on disc morphology. Rotation is a three-dimensional event that is inadequately represented with planar images in the clinic. True quantification of the intervertebral gap can be achieved with a disc height distribution. The objective of this study was to analyze disc height distribution patterns during torsion relevant to manipulation in vivo. METHODS: Eighty-one volunteers were computed tomography-scanned both in supine and in right 50° rotation positions. Virtual models of each intervertebral gap representing the disc were created with the inferior endplate of each "disc" set as the reference surface and separated into 5 anatomical zones: 4 peripheral and 1 central, corresponding to the footprint of the annulus fibrosus and nucleus pulposus, respectively. Whole-disc and individual anatomical zone disc height distributions were calculated in both positions and were compared against each other with analysis of variance, with significance set at P < .05. RESULTS: Mean neutral disc height was 7.32 mm (1.59 mm). With 50° rotation, a small but significant increase to 7.44 mm (1.52 mm) (P < .0002) was observed. The right side showed larger separation in most levels, except at L5/S1. The posterior and right zones increased in height upon axial rotation of the spine (P < .0001), whereas the left, anterior, and central decreased. CONCLUSIONS: This study quantified important tensile/compressive changes disc height during torsion. The implications of these mutually opposing changes on spinal manipulation are still unknown.

Biomechanical Evaluation of Capsulotomy, Capsulectomy, and Capsular Repair on Hip Rotation.

PURPOSE: To determine the effect of different types of capsulotomies on hip rotational biomechanical characteristics. METHODS: Seven fresh-frozen cadaveric hip specimens were thawed and dissected, leaving the hip capsule and labrum intact. The femur was transected and potted, and each specimen was placed in a custom loading apparatus that allowed for adjustment of flexion, extension, and axial rotation of the femur. Six reflective infrared markers were attached to the specimens to track the motion of the femoral head with respect to the acetabulum in real time, and external rotation was produced by applying a torque of 10 Nm to the hip specimens. Data analysis was performed using the 3-dimensional position of the markers in space. The specimens were tested in neutral flexion and 40° of flexion in the following capsular states: intact, interportal capsulotomy, T-capsulotomy, repaired capsulotomy, and capsulectomy. Paired t tests and analysis of variance were used with an α value of .05 set as significant. RESULTS: With the hip in neutral flexion, there was increased external rotation with a T-capsulotomy (91.1° ± 20.3°, P = .029) and capsulectomy (91.9° ± 19.6°, P = .015) compared with the intact hip (83.2° ± 20.5°). After complete repair of the T-capsulotomy (87.4° ± 20.6°), there was no significant difference in external rotation compared with the intact hip. No significant differences were seen between groups at 40° of hip flexion. CONCLUSIONS: A T-capsulotomy showed significantly increased external rotation versus the intact and interportal capsulotomy states. The repaired T-capsulotomy restored the rotational profile back to the native state. CLINICAL RELEVANCE: Many methods of capsular treatment during hip arthroscopy exist. Capsulotomy and capsulectomy do not restore the external rotation restraint of the hip back to its native state.

Sex Differences in Patients With CAM Deformities With Femoroacetabular Impingement: 3-Dimensional Computed Tomographic Quantification.

PURPOSE: To determine if significant differences exist between male and female CAM deformities using quantitative 3-dimensional (3D) volume and location analysis. METHODS: Retrospective analysis of preoperative computed tomographic (CT) scans for 138 femurs (69 from male patients and 69 from female patients) diagnosed with impingement from November 2009 to November 2011 was completed. Those patients who presented with hip complaints and had a history, physical examination (limited range of motion, positive impingement signs), plain radiographs (anteroposterior pelvis, 90° Dunn view, false profile view), and magnetic resonance images consistent with femoroacetabular impingement (FAI) and in whom a minimum of 6 months of conservative therapy (oral anti-inflammatory agents, physical therapy, and activity modification) had failed were indicated for arthroscopic surgery and had a preoperative CT scan. Scans were segmented, converted to point cloud data, and analyzed with a custom-written computer program. Analysis included mean CAM height and volume, head radius, and femoral version. Differences were analyzed using an unpaired t test with significance set at P < .05. RESULTS: Female patients had greater femoral anteversion compared with male patients (female patients, 15.5° ± 8.3°; male patients, 11.3° ± 9.0°; P = .06). Male femoral head radii were significantly larger than female femoral heads (female patients, 22.0 ± 1.3 mm; male patients, 25.4 ± 1.3 mm; P < .001). Male CAM height was significantly larger than that in female patients (female patients, 0.66 ± 0.61 mm; male patients, 1.51 ± 0.75 mm; P < .001). Male CAM volume was significantly larger as well (male patients, 433 ± 471 mm(3); female patients, 89 ± 124 mm(3); P < .001). These differences persisted after normalizing height (P < .001) and volume (P < .001) to femoral head radius. Average clock face distribution was from the 1:09 o'clock position ± the 2:51 o'clock position to the 3:28 o'clock position ± the 1:59 o'clock position, with an average span from the 3:06 o'clock position ± the 1:29 o'clock position (male patients, the 11:23 o'clock position ± the 0:46 o'clock position to the 3:05 o'clock position ± the 1:20 o'clock position; female patients, the 11:33 o'clock position ± the 0:37 o'clock position to the 2:27 o'clock position ± the 0:45 o'clock position). There were no differences in the posterior (P = .60) or anterior (P = .14) extent of CAM deformities. However, the span on the clock face of the CAM deformities varied when comparing men with women (male patients, the 3:43 o'clock position ± the 1:29 o'clock position; female patients, the 2:54 o'clock position ± the 1:09 o'clock position; P = .02). CONCLUSIONS: Our data show that female CAM deformities are shallower and of smaller volume than male lesions. Further studies will allow further characterization of the 3D geometry of the proximal femur and provide more precise guidance for femoral osteochondroplasty for the treatment of CAM deformities. CLINICAL RELEVANCE: Female CAM deformities may not be detectable using current 2D nonquantitative methods. These findings should raise the clinician's index of suspicion when diagnosing a symptomatic CAM lesion in female patients.

Hip and Pelvis Movement Patterns in Patients With Femoroacetabular Impingement Syndrome Differ From Controls and Change After Hip Arthroscopy During a Step-Down Pivot-Turn Task.

Background: Alterations in hip kinematics during functional tasks occur in positions that cause anterior impingement in patients with femoroacetabular impingement (FAI) syndrome. However, tasks that do not promote motions of symptomatic hip impingement remain understudied. Purpose: To compare movement patterns of the hip and pelvis during a step-down pivot-turn task between patients with FAI and controls as well as in patients with FAI before and after hip arthroscopy. Study Design: Controlled laboratory study. Methods: Three-dimensional motion capture was acquired in 32 patients with FAI and 27 controls during a step-down pivot-turn task. An FAI subsample (n = 14) completed testing 9.2 ± 2.0 months (mean ± SD; range, 5.8-13.1 months) after hip arthroscopy. Statistical parametric mapping analysis was used to analyze hip and pelvis time series waveforms (1) between the FAI and control groups, (2) in the FAI group before versus after hip arthroscopy, and (3) in the FAI group after hip arthroscopy versus the control group. Continuous parametric variables were analyzed by paired t test and nonparametric variables by chi-square test. Results: There were no significant differences in demographics between the FAI and control groups. Before hip arthroscopy, patients with FAI demonstrated reduced hip flexion (P = .041) and external rotation (P = .027), as well as decreased anterior pelvic tilt (P = .049) and forward rotation (P = .043), when compared with controls. After hip arthroscopy, patients demonstrated greater hip flexion (P < .001) and external rotation of the operative hip (P < .001), in addition to increased anterior pelvic tilt (P≤ .036) and pelvic rise (P≤ .049), as compared with preoperative values. Postoperatively, the FAI group demonstrated greater hip flexion (P≤ .047) and lower forward pelvic rotation (P = .003) as compared with the control group. Conclusion: Movement pattern differences between the FAI and control groups during the nonimpingement-related step-down pivot-turn task were characterized by differences in the sagittal and transverse planes of the hip and pelvis. After hip arthroscopy, patients exhibited greater hip flexion and external rotation and increased pelvic anterior tilt and pelvic rise as compared with presurgery. When compared with controls, patients with FAI demonstrated greater hip flexion and lower pelvic forward rotation postoperatively. Clinical Relevance: These findings indicate that hip and pelvis biomechanics are altered even during tasks that do not reproduce the anterior impingement position.

Ulnar Bowing and Distal Radioulnar Joint Anatomy: A Three-Dimensional, In Situ Clinical Assessment.

Purpose: Distal radioulnar joint (DRUJ) injuries can be devastating and challenging to manage. The multiplanar curvature exhibited by the ulna impacts the morphology of the DRUJ, making it difficult to assess through two-dimensional radiographs alone. We used full-length, three-dimensional (3D) computed tomography angiography scans to assess the relationship between ulnar bowing, DRUJ ulnar variance (UV), and sigmoid notch angle. The goal of this study was to establish normal anatomic ranges for these landmarks to improve treatment for forearm traumas and DRUJ pathologies. Methods: Eighty-two intact upper extremity computed tomography angiography scans were examined and reconstructed into 3D models. We characterized ulnar bowing and DRUJ metrics using computer-aided design software. Measures of central tendency and Pearson correlation coefficients were calculated for comparative analysis. Results: The study yielded an average ulnar length of 272.3 mm. We identified the proximal ulnar bow at 36.7% of the bone's total length, possessing a depth of 10.3 mm, a proximal angle of 6.6°, and a distal angle of 3.9°. The distal ulnar bow appeared at 75.3% of the bone's length, characterized by a depth of 4.2 mm, a proximal angle of 2°, and a distal angle of 4.3°. In the coronal plane, the proximal angle of the proximal ulnar bow correlated positively with UV (r = 0.39, P < .001), whereas the distal angle of the distal ulnar bow correlated negatively (r = -0.48, P < .001). We also found significant correlations between the depths of both proximal and distal bows with UV (r = 0.38, P < .001; r = -0.34, P < .001, respectively). Moreover, UV within the DRUJ strongly correlated with the sigmoid notch angle (r = -0.77, P = .01). In contrast, the sagittal plane metrics did not show meaningful correlations with UV. Conclusion: Sagittal alignment and translation at the DRUJ articulation are directly related to ulna bowing at the distal ulna. A nuanced understanding of these 3D relationships can enhance preoperative planning when correcting ulnar-side pathology. Type of study/level of evidence: Therapeutic IV.

3.0T magnetic resonance imaging-based hip bone models for femoroacetabular impingement syndrome are equivalent to computed tomography-based models.

This study aimed to compare three-dimensional (3D) proximal femoral and acetabular surface models generated from 3.0T magnetic resonance imaging (MRI) to the clinical gold standard of computed tomography (CT). Ten intact fresh-frozen cadaveric hips underwent CT and 3.0T MRI scans. The CT- and MRI-based segmented models were superimposed using a validated 3D-3D registration volume-merge method to compare them. The least surface-to-surface distance between the models was calculated by a point-to-surface calculation algorithm using a custom-written program. The variables of interest were the signed and absolute surface-to-surface distance between the paired bone models. One-sample t-tests were performed using a signed and absolute test value of 0.16 mm and 0.37 mm, respectively, based on a previous study that validated 1.5T MRI bone models by comparison with CT bone models. For the femur, the average signed and absolute surface-to-surface distance was 0.18 ± 0.09 mm and 0.30 ± 0.06 mm, respectively. There was no difference in the signed surface-to-surface distance and the 0.16 mm test value (t = 0.650, p = 0.532). However, the absolute surface-to-surface difference was less than the 0.37 mm test value (t = -4.025, p = 0.003). For the acetabulum, the average signed and absolute surface-to-surface distance was -0.06 ± 0.06 mm and 0.26 ± 0.04 mm, respectively. The signed (t = -12.569, p < 0.001) and absolute (t = -8.688, p < 0.001) surface-to-surface difference were less than the 0.16 mm and 0.37 mm test values, respectively. Our data shows that 3.0T MRI bone models are more similar to CT bone models than previously validated 1.5T MRI bone models. This is likely due to the higher resolution of the 3T data.

Emerging ideas: Novel 3-D quantification and classification of cam lesions in patients with femoroacetabular impingement.

BACKGROUND: Femoroacetabular impingement (FAI) can lead to labral injury, osseous changes, and even osteoarthritis. The literature contains inconsistent definitions of the alpha angle and other nonthree-dimensional (3-D) radiographic measures. We present a novel approach to quantifying cam lesions in 3-D terms. Our method also can be used to develop a classification system that describes the exact location and size of cam lesions. QUESTIONS/HYPOTHESES: We asked whether automated quantification of CAM lesions based on CT data is a reasonable way to detect CAM lesions and whether they may be classified based on location. METHOD OF STUDY: We developed a method to quantify femoral head cam lesions using 3-D modeling of CT scans. By segmenting raw DICOM data, we can determine the distance from the cam lesion's surface points to the centroid of the femoral head to quantify the mean bump height, volume, and location. The resulting 3-D femoral and acetabular models will be analyzed with custom software. We then will quantify the cam lesion with 3-D parameters using a modified zoning method. The mean bump height, volume, and location on the clock face, and relative zoning will be calculated. Zonal differences will be statistically analyzed. To assess the ability of this method to predict arthroscopic findings, we will obtain preoperative CT scans for 25 patients who undergo hip arthroscopy for FAI. We will compare measurements with the method with our measurements from arthroscopy. The clinical implications of our method's measurements then will be reviewed and refined for future prospective studies. SIGNIFICANCE: We present a novel approach that can quantify a cam lesion's location and size. This method will be used to provide guidelines for the exact amount of bony resection needed from a specific location of the proximal femur. There is also potential to develop software for ease of use so this method can be more widely applied.

Computed tomographic analysis of curved and straight guides for placement of suture anchors for acetabular labral refixation.

PURPOSE: The purpose of this study was to compare suture anchor placement in the acetabular rim between straight and curved drill guides regarding angle and distance of the suture anchor tip from the articular cartilage during labral refixation. METHODS: A total of 14 fresh-frozen cadaveric hips underwent arthroscopic labral incision from the 12 to 3 o'clock positions and subsequent repair with either a curved drill guide or a straight drill guide. These hips were then compared by computed tomographic imaging analysis by measuring the angle of suture anchor insertion and the distance of the tip of the suture anchor to the articular cartilage at the 1 o'clock, 2 o'clock, and 3 o'clock positions. RESULTS: The curved suture anchor (CSA) guide significantly increased the insertion angle (P = .009) and distance from the articular cartilage to anchor (P = .003) at the 1 o'clock position on the acetabulum. The angle of insertion at the 2 and 3 o'clock positions was greater for the CSA guide compared with the straight suture anchor (SSA) guide but did not reach statistical significance. CONCLUSIONS: A CSA guide was shown to be significantly more effective in increasing the angle of insertion of suture anchors and increased the distance of the suture anchor tip to the articular cartilage surface at the 1 o'clock position but not at the 2 or 3 o'clock position. CLINICAL RELEVANCE: The use of SSA guides can be difficult because of the osseous morphologic characteristics of the acetabular rim, leading to placement of the suture anchor away from the acetabular rim and therefore resulting in a nonanatomical refixation of the acetabular labrum. The use of a curved guide, flexible drill, and flexible suture anchor inserter may provide more precise placement of suture anchors in the acetabular rim.

Clinical three-dimensional anatomy of the femur considering navigation-aided surgery of total knee arthroplasty in Japanese patients.

PURPOSE: Few studies exist regarding sagittal alignment describing femur morphology in navigation-aided surgery. This study investigated the three-dimensional (3D) sagittal femoral alignment of the whole femur. METHODS: Seventy-three consecutive patients (59 females, 14 males, mean age: 76.1 years), yielding 140 femurs, were included in this study. A computed-tomography-based patient-specific 3D femur model was used to define a mechanical axis-based reference plane. Proximal and distal femoral axis angles (PFA, DFA) to the reference plane were measured in 3D using custom software. PFA and DFA represent the proximal and distal inclination of the femoral anatomical axis in sagittal plane, respectively. RESULTS: PFA (10.6 ± 1.5°) was greater than DFA (2.6 ± 1.6°; P < 0.0001). DFA in females (2.3 ± 1.4°) was smaller than in males (3.9 ± 1.7°; P < 0.0001). CONCLUSION: This is the first report of measurement of femoral sagittal alignment related to both 3D anatomy and decision making of femoral flexion angle using navigation surgery for total knee arthroplasty. This report shows a robust DFA measurement that could be used as a template for femoral implants flexion angle when performing both conventional and navigated total knee arthroplasty.

Computed Tomography Osteoabsorptiometry Evaluation of Cervical Endplate Subchondral Bone Mineral Density.

STUDY DESIGN: Basic Science. OBJECTIVE: Poor subchondral bone mineral density (sBMD) has been linked with subsidence of cervical interbody devices or grafts, which are traditionally placed centrally on the endplates. Considering that sBMD reflects long-term stress distributions, we hypothesize that the cervical uncovertebral joints are denser than the central endplate region. This study sought to investigate density distributions using computed tomography osteoabsorptiometry (CT-OAM). METHODS: Twelve human cervical spines from C3-C7 (60 vertebrae, 120 endplates) were imaged with CT and segmented to create 3D reconstructions. The superior and inferior endplates were isolated, and the sBMD of the whole endplate, endplate center, and uncus was evaluated using CT-OAM. Density distributions were compared across the subaxial cervical spine. RESULTS: The uncinate region of the inferior and superior endplates was significantly denser than the central endplate across all vertebral levels (P < .01). When comparing sBMD of the whole inferior and superior endplates, the superior endplate was significantly denser than the inferior endplate (P < .0001). However, the inferior uncus was denser than the superior uncus (P = .035). When assessing sBMD by vertebral level, peak densities were observed at C4 and C5, while C7 was, on average, significantly less dense than all other vertebrae. CONCLUSION: The subchondral bone of the cervical uncovertebral joints is significantly denser than the central endplates. While the superior endplate in its entirety is denser than the inferior endplate, the inverse was true for the uncovertebral joints. This study serves as a basis for future investigations of new implant designs and their implications on subsidence.

Noninvasive shape-fitting method quantifies cam morphology in femoroacetabular impingement syndrome: Implications for diagnosis and surgical planning.

There are considerable limitations associated with the standard 2D imaging currently used for the diagnosis and surgical planning of cam-type femoroacetabular impingement syndrome (FAIS). The aim of this study was to determine the accuracy of a new patient-specific shape-fitting method that quantifies cam morphology in 3D based solely on preoperative MRI imaging. Preoperative and postoperative 1.5T MRI scans were performed on n = 15 patients to generate 3D models of the proximal femur, in turn used to create the actual and the virtual cam. The actual cams were reconstructed by subtracting the postoperative from the preoperative 3D model and used as reference, while the virtual cams were generated by subtracting the preoperative 3D model from the virtual shape template produced with the shape-fitting method based solely on preoperative MRI scans. The accuracy of the shape-fitting method was tested on all patients by evaluating the agreement between the metrics of height, surface area, and volume that quantified virtual and actual cams. Accuracy of the shape-fitting method was demonstrated obtaining a 97.8% average level of agreement between these metrics. In conclusion, the shape-fitting technique is a noninvasive and patient-specific tool for the quantification and localization of cam morphology. Future studies will include the implementation of the technique within a clinically based software for diagnosis and surgical planning for cam-type FAIS.