Aggregation-Driven Photoinduced α-C(sp3)-H Bond Hydroxylation/C(sp3)-C(sp3) Coupling of Boron Dipyrromethene Dye in Water Reported by Near-Infrared Emission.

Molecular aggregation is a powerful tool for tuning advanced materials' photophysical and electronic properties. Here we present a novel potential for the aqueous-solvated aggregated state of boron dipyrromethene (BODIPY) to facilitate phototransformations otherwise achievable only under harsh chemical conditions. We show that the photoinduced symmetry-breaking charge separation state can itself initiate catalyst-free redox chemistry, leading to selective α-C(sp3)-H bond activation/Csp3-Csp3 coupling on the BODIPY backbone. The photoproduction progress was tracked by monitoring the evolution of the strong Stokes-shifted near-infrared emission, resulting from selective self-assembly of the terminal heterodimeric photoproduct into well-ordered J-aggregates, as revealed by X-ray structural analysis. These findings provide a facile and green route to further explore the promising frontier of packing-triggered selective photoconversions via supramolecular engineering.

Ultrafast Photophysics of Regioisomeric Triphenylamine Dyes Having Dipolar D-π-A-A and Octupolar D-(π-A-A)3 Character with a Benzothiazole Unit in Matched or Mismatched Orientation.

Benzothiazole is among prominent electron-withdrawing heteroarene moieties used in a variety of π-conjugated molecules. Its relative orientation with respect to the principal dipole vector(s) of chromophores derived thereof is crucial, affecting photophysical and nonlinear optical properties. Here we compare the photophysics and ultrafast dynamics of dipolar and octupolar molecules comprising a triphenylamine electron-donating core, ethynylene π-conjugated linker(s) and benzothiazole acceptor(s) having the matched or mismatched orientation (with respect to the direction of intramolecular charge transfer), while a carbaldehyde group is attached as an auxiliary acceptor. Among chromophores without the auxiliary acceptor, stronger fluorescence solvatochromism and faster excited state dynamics are exhibited for the derivatives with the mismatched geometry. On the contrary, introduction of the auxiliary acceptor to the benzothiazole unit enhances the intramolecular charge transfer ICT (featuring ultrafast dynamics of the excited state) for the matched geometry. The data confirm the crucial role of the relative orientation of asymmetric heteroaromatic unit (regioisomeric effect) in dipolar as well as in multipolar molecules in tuning linear and nonlinear optical properties as well as excited state dynamics.

Photophysics of 9,9-Dimethylacridan-Substituted Phenylstyrylpyrimidines Exhibiting Long-Lived Intramolecular Charge-Transfer Fluorescence and Aggregation-Induced Emission Characteristics.

Six pyrimidine-based push-pull systems substituted at positions C2 and C4/6 with phenylacridan and styryl moieties, employing methoxy or N,N-diphenylamino donors, have been designed and synthesized through cross-coupling and Knoevenagel reactions. X-ray analysis confirmed that the molecular structure featured the acridan moiety arranged perpendicularly to the residual π system. Photophysical studies revealed significant differences between the methoxy and N,N-diphenylamino chromophores. Solvatochromic studies revealed that the methoxy derivatives showed dual emission in polar solvents. Time-resolved spectroscopy revealed that the higher energy band involved very fast (<80 ps) fluorescence, whereas the lower energy one included long components (≈30 ns) due to long-lived intramolecular charge-transfer fluorescence. In contrast to N,N-diphenylamino chromophores, the methoxy derivatives also showed aggregation-induced emission in mixtures of THF/water, as well as dual emission in thin films, covering almost the whole visible spectrum with corresponding chromaticity coordinates not far from that of pure white light. These properties render the methoxy derivatives as very promising organic materials for white organic light-emitting diodes.

Branching effect on the linear and nonlinear optical properties of styrylpyrimidines.

This contribution aims at investigating the branching effect on the steady state, time resolved fluorescence and two-photon absorption (2PA) properties of dimethylamino and diphenylamino substituted styrylpyrimidine derivatives, by means of a combined experimental and theoretical study. In contrast to classical branched molecules with a triphenylamine central core and electron accepting groups at the periphery, here, branched molecules with reverse topology and different symmetries are examined, namely a styrylpyrimidine group is used as the electron withdrawing core and dimethylamino or diphenylamino donors are incorporated at the periphery. Besides, compared to the great majority of existing branched systems, the herein studied molecules do not have C3 symmetry. For this reason, the region of the linear and non-linear optical spectra of the two and three branched chromophores is actually similar. Interestingly, while the one-photon absorption spectra of one-branched systems versus two- or three-branched ones are spectrally shifted, there is almost no spectral shift in the main 2PA spectral region. Meanwhile, there is still an enhancement of both linear and nonlinear optical responses. Overall, here we developed a strategy that enhances the 2PA response while maintaining the spectral position. Specifically, 2PA cross section values as high as 500 GM have been obtained for the diphenylamino A-(π-D)3 molecule in dichloromethane.

Photophysical and Protonation Time Resolved Studies of Donor-Acceptor Branched Systems With Pyridine Acceptors.

A comparative study of the photophysical properties of octupolar pyridyl-terminated triphenylamine molecule, with its quadrupolar and dipolar analogues, by means of ambient and low temperature steady state spectroscopy and femtosecond to nanosecond time-resolved fluorescence spectroscopy is reported. The push-pull molecules bear triphenylamine electron donating core, pyridine peripheral electron acceptors, and acetylene π-bridge. The samples were studied in solvents of varying polarity and also upon addition of small amounts of acetic acid to induce protonation of the pyridine group. All samples exhibit significant positive fluorescence solvatochromism as well as a relaxation of their excited state to a solvent relaxed intramolecular charge transfer state on the picosecond time scale. For the octupolar compound, excited state relaxation occurs simultaneously with excitation energy hopping among the branches. The hopping time is solvent polarity controlled since it becomes slower as the polarity increases. The experimental hopping times are compared to those predicted by Förster and Fermi formulations. The samples are capable of emitting broadband light covering almost the whole visible spectrum by careful control of protonation. Energy transfer from the neutral toward the protonated species on the 1 ps time scale is revealed.

Energy transfer within self-assembled cyclic multichromophoric arrays based on orthogonally arranged donor-acceptor building blocks.

We herein present the coordination-driven supramolecular synthesis and photophysics of a [4+4] and a [2+2] assembly, built up by alternately collocated donor-acceptor chromophoric building blocks based, respectively, on the boron dipyrromethane (Bodipy) and perylene bisimide dye (PBI). In these multichromophoric scaffolds, the intensely absorbing/emitting dipoles of the Bodipy subunit are, by construction, cyclically arranged at the corners and aligned perpendicular to the plane formed by the closed polygonal chain comprising the PBI units. Steady-state and fs time-resolved spectroscopy reveal the presence of efficient energy transfer from the vertices (Bodipys) to the edges (PBIs) of the polygons. Fast excitation energy hopping - leading to a rapid excited state equilibrium among the low energy perylene-bisimide chromophores - is revealed by fluorescence anisotropy decays. The dynamics of electronic excitation energy hopping between the PBI subunits was approximated on the basis of a theoretical model within the framework of Förster energy transfer theory. All energy-transfer processes are quantitatively describable with Förster theory. The influence of structural deformations and orientational fluctuations of the dipoles in certain kinetic schemes is discussed.

Exploring Solvent and Substituent Effects on the Excited State Dynamics and Symmetry Breaking of Quadrupolar Triarylamine End-Capped Benzothiazole Chromophores by Femtosecond Spectroscopy.

We investigate herein the excited state dynamics and symmetry breaking processes in three benzothiazole-derived two-photon absorbing chromophores by femtosecond fluorescence and transient absorption (fs-TA) spectroscopies in solvents of various polarity. The chromophores feature a quasi-quadrupolar D-π-A-π-D architecture comprised of an electron-withdrawing benzothiazole core and lateral triphenylamine donors (Qbtz-H), while the acceptor strength of the central unit is enforced by attached cyano groups (Qbtz-CN) and the electron-donating strength of the arylamine moieties by introduction of peripheral methoxy groups (Qbtz'-CN). Steady state spectroscopy reveals positive solvatochromism, which is mostly pronounced for Qbtz'-CN. Femtosecond spectroscopy of Qbtz-H reveals the coexistence of the Franck-Condon (FC) state and states populated after symmetry breaking (SB) in low-polarity solvents such as toluene and tetrahydrofuran, while the SB state becomes favorable in polar acetonitrile. For the other two molecules possessing a stronger electron-accepting unit and thus more polar excited state, SB takes place even in low-polarity solvents, as shown by fs-TA spectroscopy. Global fitting of the fs-TA spectra together with investigation of the evolution associated spectra (EAS) reveals the existence of an initial FC state in Qbtz-H, in all studied solvents, which relaxes toward Intermediate Charge Transfer (I-CT) and SB states. On the other hand, for Qbtz-CN and Qbtz'-CN in more polar solvents, the FC state undergoes ultrafast relaxation toward symmetry-broken charge transfer (SB-CT) states which in turn show very fast recombination to the ground state. Our measurements confirm that the extent of symmetry breaking is larger for D-π-A-π-D systems with the stronger acceptor core and increases further by increasing electron-donating strength of triarylamine moieties, giving rise to symmetry breaking in these nonionic quadrupolar molecules with ethynylene (triple bond) π-spacers also in less polar solvents.

Benzothiazoles with tunable electron-withdrawing strength and reverse polarity: a route to triphenylamine-based chromophores with enhanced two-photon absorption.

A series of dipolar and octupolar triphenylamine-derived dyes containing a benzothiazole positioned in the matched or mismatched fashion have been designed and synthesized via palladium-catalyzed Sonogashira cross-coupling reactions. Linear and nonlinear optical properties of the designed molecules were tuned by an additional electron-withdrawing group (EWG) and by changing the relative positions of the donor and acceptor substituents on the heterocyclic ring. This allowed us to examine the effect of positional isomerism and extend the structure-property relationships useful in the engineering of novel heteroaromatic-based systems with enhanced two-photon absorption (TPA). The TPA cross-sections (δ(TPA)) in the target compounds dramatically increased with the branching of the triphenylamine core and with the strength of the auxiliary acceptor. In addition, a change from the commonly used polarity in push-pull benzothiazoles to a reverse one has been revealed as a particularly useful strategy (regioisomeric control) for enhancing TPA cross-sections and shifting the absorption and emission maxima to longer wavelengths. The maximum TPA cross-sections of the star-shaped three-branched triphenylamines are ∼500-2300 GM in the near-infrared region (740-810 nm); thereby the molecular weight normalized δ(TPA)/MW values of the best performing dyes within the series (2.0-2.4 GM·g(-1)·mol) are comparable to those of the most efficient TPA chromophores reported to date. The large TPA cross-sections combined with high emission quantum yields and large Stokes shifts make these compounds excellent candidates for various TPA applications, including two-photon fluorescence microscopy.

Direct Iodination of Electron-Deficient Benzothiazoles: Rapid Access to Two-Photon Absorbing Fluorophores with Quadrupolar D-π-A-π-D Architecture and Tunable Heteroaromatic Core.

Direct iodination of benzothiazoles under strong oxidative/acidic conditions leads to a mixture of iodinated heteroarenes with 1-2 major components, which are easily separable and which structures depend on the I2 equivalents used. Among the unexpected but dominant products were identified 4,7-diiodobenzothiazoles with a rare substitution pattern for SEAr reactions of this scaffold. These were employed in the synthesis of 4,7-bis(triarylamine-ethynyl)benzothiazoles - a new class of highly efficient quasi-quadrupolar fluorophores displaying large two-photon absorption cross sections (540-1374 GM) in the near-infrared region.

Oxidative C-H Homocoupling of Push-Pull Benzothiazoles: An Atom-Economical Route to Highly Emissive Quadrupolar Arylamine-Functionalized 2,2'-Bibenzothiazoles with Enhanced Two-Photon Absorption.

Copper(II)-catalyzed C-H/C-H coupling of dipolar 2-H-benzothiazoles end-capped with triphenylamine moieties affords highly fluorescent 2,2'-bibenzothiazoles with quadrupolar (D-π-A-π-D) architecture displaying large two-photon absorption (TPA) cross sections (543-1252 GM) in the near-infrared region. The notably higher TPA performance as compared to quadrupolar π-systems with a widely used 2,2'-bipyridine core, along with the ease of the synthesis and chelating N^N ability, makes the title biheteroaryl platform an attractive building block for a large scope of functional dyes exploiting nonlinear optical phenomena.

Benzothiazole-based fluorophores of donor-pi-acceptor-pi-donor type displaying high two-photon absorption.

A series of novel heterocycle-based dyes with donor-pi-bridge-acceptor-pi-bridge-donor (D-pi-A-pi-D) structural motif, where benzothiazole serves as an electron-withdrawing core, have been designed and synthesized via palladium-catalyzed Sonogashira and Suzuki-type cross-coupling reactions. All the target chromophores show strong one-photon and two-photon excited emission. The maximum two-photon absorption (TPA) cross sections delta(TPA) of the prepared derivatives bearing diphenylamino functionalities occur at wavelengths ranging from 760 to 800 nm and are as large as approximately 900-1100 GM. One- and two-photon absorption characteristics of the title dyes have also been investigated by using density functional theory (DFT) and the structure-property relationships are discussed. The TPA cross sections calculated by means of quadratic response time-dependent DFT using the Coulomb-attenuated CAM-B3LYP functional support the experimentally observed trends within the series, as well as higher delta(TPA) values of the title compounds compared to those of analogous fluorene or carbazole-derived dyes. In contrast, the traditional B3LYP functional was not successful in predicting the observed trend of TPA cross sections for systems with different central cores. In general, structural modification of the pi-bridge composition by replacement of ethynylene (alkyne) with E-ethenylene (alkene) linkages and/or replacement of dialkylamino electron-donating edge substituents by diarylamino ones results in an increase of delta(TPA) values. The combination of large TPA cross sections and high emission quantum yields makes the title benzothiazole-based dyes attractive for applications involving two-photon excited fluorescence (TPEF).

Strong two photon absorption and photophysical properties of symmetrical chromophores with electron accepting edge substituents.

Two photon absorption (TPA) and photophysical properties of three new symmetrical chromophores with electron accepting phthalimide edge substituents have been studied. The three chromophores contain fluorene, alcoxy-substituted divinyl benzene, and carbazole moieties as central cores, respectively. The femtosecond time-resolved fluorescence upconversion spectroscopy and two photon excited fluorescence technique have been carried out. The effect of solvent polarity on TPA and on photophysics has also been determined. Ultrafast fluorescence dynamics, with decay times ranging from 1 to 13 ps, are revealed in polar solvents. This is attributed to the relaxation of the chromophores to the intramolecular charge transfer state. The chromophore bearing fluorene central core, being of the type A-pi-A, is the most efficient concerning TPA. Strong TPA, with a cross section value as high as 2100 GM at an excitation wavelength of 770 nm is found in acetophenone which is a solvent of intermediate polarity. The TPA spectra were also reproduced using a sum over states three-state model. A study of the TPA induced photobleaching of the fluorene molecule, doped in a solid poly(methyl-methacrylate) film, has shown that this material is very promising for efficient TPA optical data storage.

Functionalized Zinc Porphyrins with Various Peripheral Groups for Interfacial Electron Injection Barrier Control in Organic Light Emitting Diodes.

Here, we use a simple and effective method to accomplish energy level alignment and thus electron injection barrier control in organic light emitting diodes (OLEDs) with a conventional architecture based on a green emissive copolymer. In particular, a series of functionalized zinc porphyrin compounds bearing π-delocalized triazine electron withdrawing spacers for efficient intramolecular electron transfer and different terminal groups such as glycine moieties in their peripheral substitutes are employed as thin interlayers at the emissive layer/Al (cathode) interface to realize efficient electron injection/transport. The effects of spatial (i.e., assembly) configuration, molecular dipole moment and type of peripheral group termination on the optical properties and energy level tuning are investigated by steady-state and time-resolved photoluminescence spectroscopy in F8BT/porphyrin films, by photovoltage measurements in OLED devices and by surface work function measurements in Al electrodes modified with the functionalized zinc porphyrins. The performance of OLEDs is significantly improved upon using the functionalized porphyrin interlayers with the recorded luminance of the devices to reach values 1 order of magnitude higher than that of the reference diode without any electron injection/transport interlayer.

Low Work Function Lacunary Polyoxometalates as Electron Transport Interlayers for Inverted Polymer Solar Cells of Improved Efficiency and Stability.

Effective interface engineering has been shown to play a vital role in facilitating efficient charge-carrier transport, thus boosting the performance of organic photovoltaic devices. Herein, we employ water-soluble lacunary polyoxometalates (POMs) as multifunctional interlayers between the titanium dioxide (TiO2) electron extraction/transport layer and the organic photoactive film to simultaneously enhance the efficiency, lifetime, and photostability of polymer solar cells (PSCs). A significant reduction in the work function (WF) of TiO2 upon POM utilization was observed, with the magnitude being controlled by the negative charge of the anion and the selection of the addenda atom (W or Mo). By inserting a POM interlayer with ∼10 nm thickness into the device structure, a significant improvement in the power conversion efficiency was obtained; the optimized POM-modified poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl][3-fluoro-2-[(2- 33 ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]]:[6,6]-phenyl-C70 butyric acid methyl ester (PTB7:PC70BM)-based PSCs exhibited an efficiency of 8.07%, which represents a 21% efficiency enhancement compared to the reference TiO2 cell. Similar results were obtained in POM-modified devices based on poly(3-hexylthiophene) (P3HT) with electron acceptors of different energy levels, such as PC70BM or indene-C60 bisadduct (IC60BA), which enhanced their efficiency up to 4.34 and 6.21%, respectively, when using POM interlayers; this represents a 25-33% improvement as compared to the reference cells. Moreover, increased lifetime under ambient air and improved photostability under constant illumination were observed in POM-modified devices. Detailed analysis shows that the improvements in efficiency and stability synergistically stem from the reduced work function of TiO2 upon POM coverage, the improved nanomorphology of the photoactive blend, the reduced interfacial recombination losses, the superior electron transfer, and the more effective exciton dissociation at the photoactive layer/POM/TiO2 interfaces.

Influence of aggregates and solvent aromaticity on the emission of conjugated polymers.

The influence of aggregates and solvent aromaticity on the photophysics and fluorescence dynamics of two conjugated polymers is studied. The two polymers are derivatives of poly(p-phenylene vinylene) (PPV) containing different kinked moieties along the main chain. The polymers contain 2,6-diphenylpyridine and m-terphenyl kinked moieties and they are abbreviated as PN and PC, respectively. The insertion of kinked segments along the main chain shifts the emission spectrum from the yellow-orange spectral region, common to PPV derivatives, to the blue-green spectral region. The results show that in dilute solutions the polymers decay monoexponentially, while in concentrated ones the fluorescence decays biexponentially, indicating fluorescence quenching. This is attributed to an energy transfer process from polymer chains to aggregates that occurs within a few tens of picoseconds. By comparing the photophysics and fluorescence dynamics of polymer PN in a nonaromatic and an aromatic solvent, we conclude that the polymer conformation adopted in the aromatic solvent leads to a higher fluorescence quantum yield and a longer fluorescence lifetime. Furthermore, the fluorescence quenching of PN because of aggregates is faster and more efficient in the aromatic than in the nonaromatic solvent. These results can be explained through a more extended chain conformation of PN in the aromatic solvent.

Femtosecond time resolved fluorescence dynamics of a cationic water-soluble poly(fluorenevinylene-co-phenylenevinylene).

A recently synthesized cationic water-soluble poly(fluorenevinylene-co-phenylenevinylene) was studied by means of steady state and femtosecond time resolved upconversion spectroscopy in aqueous and EtOH solutions. Steady state spectroscopic measurements showed that the polymer emits at the blue-green spectral region and that aggregates are formed in concentrated polymer solutions. The fluorescence dynamics of the polymer in concentrated solutions, studied at a range of emission wavelengths, exhibited a wavelength dependent and multiexponential decay, indicating the existence of various decay mechanisms. Specifically, a rapid decay at short emission wavelengths and a slow rise at long wavelengths were observed. Both features reveal an energy transfer process from isolated to aggregated chains. The contribution of the energy transfer process as well as of the isolated chains and the aggregates on the overall fluorescence decay of the polymer was determined. The dependence of the energy transfer rate and efficiency on polymer concentration was also examined.

Substituent effect on the photobleaching of pyrylium salts under ultrashort pulsed illumination.

The current article presents the photobleaching properties of a group of pyrylium salts under ultrashort pulsed illumination. These pyrylium salts have the same basic chemical structure and differ only by a specific substituent. It is proven experimentally that two different mechanisms are simultaneously present to the photobleaching of all molecules studied (independently of their specific chemical structure). However, the particular parameters of each mechanism are influenced significantly by the substituent change. The experimental investigation of these parameters showed the presence of multiphoton interactions in the photobleaching of pyrylium salts depending essentially on the specific substituent.

Formation of a highly-ordered rigid multichromophoric 3D supramolecular network by combining ionic and coordination-driven self-assembly.

We present here the self-assembly of a green-emitting metallosupramolecular rhomboid into a rigid, highly-ordered 3D multichromophoric network through the mediation of a tetra-anionic violet-blue molecular emitter. Control was obtained on the spatial topology, the electronic energy landscape and the fluorescence polarization of the interacting dipoles.

Surface Modification of ZnO Layers via Hydrogen Plasma Treatment for Efficient Inverted Polymer Solar Cells.

Modifications of the ZnO electron extraction layer with low-pressure H plasma treatment increased the efficiency of inverted polymer solar cells (PSCs) based on four different photoactive blends, namely, poly(3-hexylthiophene):[6,6]-phenyl C71 butyric acid methyl ester (P3HT:PC71BM), P3HT:1',1″,4',4″-tetrahydro-di[1,4]methanonaphthaleno-[5,6]ullerene-C60 (P3HT:IC60BA), poly[(9-(1-octylnonyl)-9H-carbazole-2,7-diyl)-2,5-thiophenediyl-2,1,3-benzothiadiazole-4,7-diyl-2,5-thiophenediyl]:PC71BM (PCDTBT:PC71BM), and (poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl][3-fluoro-2-(2-ethylhexy)carbonyl]thieno[3,4-b]thiophenediyl]]):PC71BM (PTB7:PC71BM), irrespective of the donor:acceptor combination in the photoactive blend. The drastic improvement in device efficiency is dominantly attributable to the reduction in the work function of ZnO followed by a decreased energy barrier for electron extraction from fullerene acceptor. In addition, reduced recombination losses and improved nanomorphology of the photoactive blend in the devices with the H plasma treated ZnO layer were observed, whereas exciton dissociation also improved with hydrogen treatment. As a result, the inverted PSC consisting of the P3HT:PC71BM blend exhibited a high power conversion efficiency (PCE) of 4.4%, the one consisting of the P3HT:IC60BA blend exhibited a PCE of 6.6%, and our champion devices with the PCDTBT:PC71BM and PTB7:PC71BM blends reached high PCEs of 7.4 and 8.0%, respectively.

Study of the isotropic and anisotropic fluorescence of two oligothiophenes by femtosecond time-resolved spectroscopy.

The excited-state dynamics of two oligothiophenes, 5,5'-dicarboxyhaldehyde 2,2',5',2' '-terthiophene and 5-carboxyhaldehyde 2,2',5',2' '-terthiophene, were studied by time-resolved fluorescence spectroscopy, in the femtosecond regime. The isotropic and anisotropic parameters of their fluorescence were calculated. The angle (alpha) between the absorption and emission molecular dipoles was estimated from the initial fluorescence anisotropy. The effect of the chemical substituents, at the ends of the main chain of the molecule, on the temporal behavior of the fluorescence was investigated. Particularly, the nonsymmetric oligothiophene molecule (containing one aldehyde group) exhibits shorter excited-state isotropic decay time than the symmetric one (containing two aldehyde groups). This is due to the higher value of the emission dipole moment of the nonsymmetric oligothiophene in comparison with that of the symmetric one. Additionally, the two materials have almost the same anisotropic fluorescence parameters, and this is attributed to the same rotational motions in the excited state due to their similar molecular structures.