Signatures of a surface spin-orbital chiral metal.

The relation between crystal symmetries, electron correlations and electronic structure steers the formation of a large array of unconventional phases of matter, including magneto-electric loop currents and chiral magnetism1-6. The detection of such hidden orders is an important goal in condensed-matter physics. However, until now, non-standard forms of magnetism with chiral electronic ordering have been difficult to detect experimentally7. Here we develop a theory for symmetry-broken chiral ground states and propose a methodology based on circularly polarized, spin-selective, angular-resolved photoelectron spectroscopy to study them. We use the archetypal quantum material Sr2RuO4 and reveal spectroscopic signatures that, despite being subtle, can be reconciled with the formation of spin-orbital chiral currents at the surface of the material8-10. As we shed light on these chiral regimes, our findings pave the way for a deeper understanding of ordering phenomena and unconventional magnetism.

Pattern Formation by Electric-Field Quench in a Mott Crystal.

The control of the Mott phase is intertwined with the spatial reorganization of the electronic states. Out-of-equilibrium driving forces typically lead to electronic patterns that are absent at equilibrium, whose nature is however often elusive. Here, we unveil a nanoscale pattern formation in the Ca2RuO4 Mott insulator. We demonstrate how an applied electric field spatially reconstructs the insulating phase that, uniquely after switching off the electric field, exhibits nanoscale stripe domains. The stripe pattern has regions with inequivalent octahedral distortions that we directly observe through high-resolution scanning transmission electron microscopy. The nanotexture depends on the orientation of the electric field; it is nonvolatile and rewritable. We theoretically simulate the charge and orbital reconstruction induced by a quench dynamics of the applied electric field providing clear-cut mechanisms for the stripe phase formation. Our results open the path for the design of nonvolatile electronics based on voltage-controlled nanometric phases.

Photocatalytic activity of P-doped TiO2 photocatalyst.

In this study, P-doped TiO2 photocatalysts with different molar percentages (in the range 0.071-1.25 mol %) of the non-metallic element were prepared and their photocatalytic activity under visible light irradiation was tested. All achieved samples were characterized by XRD, Raman, UV-Vis DRS and SEM-EDX techniques. XRD and Raman analysis showed that all doped photocatalysts were in anatase phase and evidenced that P ions were successfully incorporated into the TiO2 crystal lattice, affecting also the crystallinity degree of the P-doped TiO2 photocatalysts. Noticeably, the UV-Vis DRS spectra evidenced that the highest redshift in absorption edge was observed for the photocatalyst with the lowest P content (0.071PT), which showed also the lowest bandgap (2.9 eV). The photocatalytic performances of all P-doped TiO2 samples were compared with that of commercial TiO2 by evaluating the decolorization of methylene blue (MB) dye under visible light irradiation. Results showed that phosphorus doping strongly promoted photocatalytic activity in the presence of visible light. Furthermore, the most active photocatalyst in visible light tests (0.071PT) also showed better photocatalytic activity than commercial TiO2 in the decolorization of MB under simulated sunlight irradiation. Finally, 0.071PT photocatalyst was preliminarily tested against Escherichia coli (E. coli) under simulated solar light, showing an inactivation efficiency of 90% after 2 h of treatment time.

Polydopamine-Coated Poly-Lactic Acid Aerogels as Scaffolds for Tissue Engineering Applications.

Poly-L-lactic acid (PLLA) aerogel-based scaffolds were obtained from physical PLLA gels containing cyclopentanone (CPO) or methyl benzoate (BzOMe) molecules. An innovative single step method of solvent extraction, using supercritical CO2, was used to achieve cylindrical monolithic aerogels. The pore distribution and size, analyzed by SEM microscopy, were found to be related to the crystalline forms present in the physical nodes that hold the gels together, the stable α'-form and the metastable co-crystalline ε-form, detected in the PLLA/BzOMe and PLLA/CPO aerogels, respectively. A higher mechanical compressive strength was found for the PLLA/CPO aerogels, which exhibit a more homogenous porosity. In vitro biocompatibility tests also indicated that monolithic PLLA/CPO aerogels exhibited greater cell viability than PLLA/BzOMe aerogels. An improved biocompatibility of PLLA/CPO monolithic aerogels was finally observed by coating the surface of the aerogels with polydopamine (PDA) obtained by the in situ polymerization of dopamine (DA). The synergistic effect of biodegradable polyester (PLLA) and the biomimetic interface (PDA) makes this new 3D porous scaffold, with porosity and mechanical properties that are tunable based on the solvent used in the preparation process, attractive for tissue engineering applications.

Designing antiphase boundaries by atomic control of heterointerfaces.

Extended defects are known to have critical influences in achieving desired material performance. However, the nature of extended defect generation is highly elusive due to the presence of multiple nucleation mechanisms with close energetics. A strategy to design extended defects in a simple and clean way is thus highly desirable to advance the understanding of their role, improve material quality, and serve as a unique playground to discover new phenomena. In this work, we report an approach to create planar extended defects-antiphase boundaries (APB) -with well-defined origins via the combination of advanced growth, atomic-resolved electron microscopy, first-principals calculations, and defect theory. In La2/3Sr1/3MnO3 thin film grown on Sr2RuO4 substrate, APBs in the film naturally nucleate at the step on the substrate/film interface. For a single step, the generated APBs tend to be nearly perpendicular to the interface and propragate toward the film surface. Interestingly, when two steps are close to each other, two corresponding APBs communicate and merge together, forming a unique triangle-shaped defect domain boundary. Such behavior has been ascribed, in general, to the minimization of the surface energy of the APB. Atomic-resolved electron microscopy shows that these APBs have an intriguing antipolar structure phase, thus having the potential as a general recipe to achieve ferroelectric-like domain walls for high-density nonvolatile memory.

Periodic Surface Structuring of Copper with Spherical and Cylindrical Lenses.

The use of a cylindrical lens in femtosecond laser surface structuring is receiving attention to improve the processing efficiency. Here, we investigate the structures produced on a copper target, in air, by exploiting both spherical and cylindrical lenses for beam focusing, aiming at elucidating similarities and differences of the two approaches. The morphological features of the surface structures generated by ≈180 fs laser pulses at 1030 nm over areas of 8 × 8 mm2 were analyzed. For the spherical lens, micron-sized parallel channels are formed on the target surface, which is covered by subwavelength ripples and nanoparticles. Instead, the cylindrical lens leads to a surface decorated with ripples and nanoparticles with a negligible presence of micro-channels. Moreover, the morphological features achieved by focusing ≈180 fs laser pulses at 515 nm with the cylindrical lens and varying the scanning parameters were also studied. The experimental results evidence a direct effect of the hatch distance used in the scanning process on the target surface that contains dark and bright bands corresponding to regions where the rippled surface contains a richer decoration or a negligible redeposition of nanoparticles. Our findings can be of interest in large area surface structuring for the selection of the more appropriate focusing configuration according to the final application of the structured surface.

Emergence and Evolution of Crystallization in TiO2 Thin Films: A Structural and Morphological Study.

Among all transition metal oxides, titanium dioxide (TiO2) is one of the most intensively investigated materials due to its large range of applications, both in the amorphous and crystalline forms. We have produced amorphous TiO2 thin films by means of room temperature ion-plasma assisted e-beam deposition, and we have heat-treated the samples to study the onset of crystallization. Herein, we have detailed the earliest stage and the evolution of crystallization, as a function of both the annealing temperature, in the range 250-1000 °C, and the TiO2 thickness, varying between 5 and 200 nm. We have explored the structural and morphological properties of the as grown and heat-treated samples with Atomic Force Microscopy, Scanning Electron Microscopy, X-ray Diffractometry, and Raman spectroscopy. We have observed an increasing crystallization onset temperature as the film thickness is reduced, as well as remarkable differences in the crystallization evolution, depending on the film thickness. Moreover, we have shown a strong cross-talking among the complementary techniques used displaying that also surface imaging can provide distinctive information on material crystallization. Finally, we have also explored the phonon lifetime as a function of the TiO2 thickness and annealing temperature, both ultimately affecting the degree of crystallinity.

Magnetic-Field Tunable Intertwined Checkerboard Charge Order and Nematicity in the Surface Layer of Sr2 RuO4.

In strongly correlated electron materials, the electronic, spin, and charge degrees of freedom are closely intertwined. This often leads to the stabilization of emergent orders that are highly sensitive to external physical stimuli promising opportunities for technological applications. In perovskite ruthenates, this sensitivity manifests in dramatic changes of the physical properties with subtle structural details of the RuO6 octahedra, stabilizing enigmatic correlated ground states, from a hotly debated superconducting state via electronic nematicity and metamagnetic quantum criticality to ferromagnetism. Here, it is demonstrated that the rotation of the RuO6 octahedra in the surface layer of Sr2 RuO4 generates new emergent orders not observed in the bulk material. Through atomic-scale spectroscopic characterization of the low-energy electronic states, four van Hove singularities are identified in the vicinity of the Fermi energy. The singularities can be directly linked to intertwined nematic and checkerboard charge order. Tuning of one of these van Hove singularities by magnetic field is demonstrated, suggesting that the surface layer undergoes a Lifshitz transition at a magnetic field of ≈32T. The results establish the surface layer of Sr2 RuO4 as an exciting 2D correlated electron system and highlight the opportunities for engineering the low-energy electronic states in these systems.

Fermi surface and kink structures in [Formula: see text] revealed by synchrotron-based ARPES.

The low-energy electronic structure, including the Fermi surface topology, of the itinerant metamagnet [Formula: see text] is investigated for the first time by synchrotron-based angle-resolved photoemission. Well-defined quasiparticle band dispersions with matrix element dependencies on photon energy or photon polarization are presented. Four bands crossing the Fermi-level, giving rise to four Fermi surface sheets are resolved; and their complete topography, effective mass as well as their electron and hole character are determined. These data reveal the presence of kink structures in the near-Fermi-level band dispersion, with energies ranging from 30 to 69 meV. Together with previously reported Raman spectroscopy and lattice dynamic calculation studies, the data suggest that these kinks originate from strong electron-phonon coupling present in [Formula: see text]. Considering that the kink structures of [Formula: see text] are similar to those of the other three members of the Ruddlesden Popper structured ruthenates, the possible universality of strong coupling of electrons to oxygen-related phonons in [Formula: see text] compounds is proposed.

Colorimetric Immunosensor by Aggregation of Photochemically Functionalized Gold Nanoparticles.

A colorimetric immunosensor based on local surface plasmon resonance by gold nanoparticles is presented, and its application for the detection of human immunoglobulin G (IgG) is demonstrated. The color change of the colloidal solution is produced by nanoparticle aggregation, a process that can be tuned by the presence of the analyte once the nanoparticles are functionalized. In comparison to common functionalization techniques, the procedure described here is simpler, low-cost, and effective in binding antibodies upright on the gold surface. The dose-response curve is similar to that resulting in typical immunoassay platforms and is satisfactorily described by the proposed theoretical model. Human IgG at concentration levels of few hundreds of nanograms per milliliter can be detected by eyes within a few minutes, thereby making the colorimetric immunosensor proposed here a powerful tool in several areas, with urine test in medical diagnostics being the most immediate.

Analysis of nascent silicon phase-change gratings induced by femtosecond laser irradiation in vacuum.

The formation of periodic surface structures is a general effect of femtosecond laser irradiation of solid targets showing promising interest in material science and technology. However, the experiments are typically carried out in air, a condition in which the target surface becomes densely decorated with nanoparticles that can influence the formation of the surface structures in the early stage of the irradiation process. Here we report an investigation of structures generation on a silicon surface irradiated in vacuum (10-5 mbar) with a low number of laser pulses (N ≤ 10) that exploits several microscopy techniques (optical, atomic force, electron and Raman). Our analyses allow identifying the creation of silicon phase-change gratings consisting of alternating amorphous and crystalline periodic lines, with almost no material removal, located at the periphery of a shallow ablation crater. These gratings originate from two different kinds of defects: (i) the first is characterized by a peculiar lobed shape that is produced by the first few laser pulses; (ii) the second is provided by the one-dimensional, linear singularity defined by the ablation edge of the nascent crater. Both kind of defects lead to grating structures extending outwards the amorphous central area of the crater along the direction of the laser polarization. Comparative analysis with the surface formed in air, in the same experimental conditions, evidences the important role played by nanoparticles densely decorating the target in air and the striking variation occurring in vacuum.

Surface structures with unconventional patterns and shapes generated by femtosecond structured light fields.

We present an investigation on ultrashort laser surface structuring with structured light fields generated by various q-plates. In particular, q-plates with topological charges q = 1, 3/2, 2, 5/2 are used to generate femtosecond (fs) vector vortex beams, and form complex periodic surface structures through multi-pulse ablation of a solid crystalline silicon target. We show how optical retardation tuning of the q-plate offers a feasible way to vary the fluence transverse distribution of the beam, thus allowing the production of structures with peculiar shapes, which depend on the value of q. The features of the generated surface structures are compared with the vector vortex beam characteristics at the focal plane, by rationalizing their relationship with the local state of the laser light. Our experimental findings demonstrate how irradiation with fs complex light beams can offer a valuable route to design unconventional surface structures.

Surface Structuring with Polarization-Singular Femtosecond Laser Beams Generated by a q-plate.

In the last few years femtosecond optical vortex beams with different spatial distributions of the state of polarization (e.g. azimuthal, radial, spiral, etc.) have been used to generate complex, regular surface patterns on different materials. Here we present an experimental investigation on direct femtosecond laser surface structuring based on a larger class of vector beams generated by means of a q-plate with topological charge q = +1/2. In fact, voltage tuning of q-plate optical retardation allows generating a family of ultrashort laser beams with a continuous spatial evolution of polarization and fluence distribution in the focal plane. These beams can be thought of as a controlled coherent superposition of a Gaussian beam with uniform polarization and a vortex beam with a radial or azimuthal state of polarization. The use of this family of ultrashort laser beams in surface structuring leads to a further extension of the achievable surface patterns. The comparison of theoretical predictions of the vector beam characteristics at the focal plane and the generated surface patterns is used to rationalize the dependence of the surface structures on the local state of the laser beam, thus offering an effective way to either design unconventional surface structures or diagnose complex ultrashort laser beams.

Missing magnetism in Sr4Ru3O10: Indication for Antisymmetric Exchange Interaction.

Metamagnetism occuring inside a ferromagnetic phase is peculiar. Therefore, Sr4Ru3O10, a T C = 105 K ferromagnet, has attracted much attention in recent years, because it develops a pronounced metamagnetic anomaly below T C for magnetic fields applied in the crystallographic ab-plane. The metamagnetic transition moves to higher fields for lower temperatures and splits into a double anomaly at critical fields H c1 = 2.3 T and H c2 = 2.8 T, respectively. Here, we report a detailed study of the different components of the magnetization vector as a function of temperature, applied magnetic field, and varying angle in Sr4Ru3O10. We discover for the first time a reduction of the magnetic moment in the plane of rotation at the metamagnetic transition. The anomaly shifts to higher fields by rotating the field from H ⊥ c to H || c. We compare our experimental findings with numerical simulations based on spin reorientation models taking into account magnetocrystalline anisotropy, Zeeman effect and antisymmetric exchange interactions. While Magnetocrystalline anisotropy combined with a Zeeman term are sufficient to explain a metamagnetic transition in Sr4Ru3O10, a Dzyaloshinskii-Moriya term is crucial to account for the reduction of the magnetic moment as observed in the experiments.

Comparative study of initial stages of copper immersion deposition on bulk and porous silicon.

Initial stages of Cu immersion deposition in the presence of hydrofluoric acid on bulk and porous silicon were studied. Cu was found to deposit both on bulk and porous silicon as a layer of nanoparticles which grew according to the Volmer-Weber mechanism. It was revealed that at the initial stages of immersion deposition, Cu nanoparticles consisted of crystals with a maximum size of 10 nm and inherited the orientation of the original silicon substrate. Deposited Cu nanoparticles were found to be partially oxidized to Cu2O while CuO was not detected for all samples. In contrast to porous silicon, the crystal orientation of the original silicon substrate significantly affected the sizes, density, and oxidation level of Cu nanoparticles deposited on bulk silicon.

Neutron diffraction study of triple-layered Sr4Ru3O10.

The magnetic properties of the triple-layered Sr(4)Ru(3)O(10) have been investigated by means of neutron scattering diffraction. At zero field we find that the magnetic moments are ferromagnetically coupled and oriented along the c-axis with no signatures of either long-range antiferromagnetic order or ferromagnetic components in the ab-plane. The field dependence of the reflection intensity points to a metamagnetic response involving only the planar magnetic moments. The structural refinement indicates a distinct rearrangement of the unit cell as a function of both temperature and in-plane applied field. We show that at the temperature T* ~/= 50 K, below which the metamagnetic behavior is observed, the c-axis lattice parameter exhibits a rapid increase while the in-plane amplitude saturates. A similar upturn of the in-plane lattice parameter after the quench of the c-axis amplitude occurs above a critical magnetic field.

Angle-resolved photoemission spectroscopy at ultra-low temperatures.

The physical properties of a material are defined by its electronic structure. Electrons in solids are characterized by energy (ω) and momentum (k) and the probability to find them in a particular state with given ω and k is described by the spectral function A(k, ω). This function can be directly measured in an experiment based on the well-known photoelectric effect, for the explanation of which Albert Einstein received the Nobel Prize back in 1921. In the photoelectric effect the light shone on a surface ejects electrons from the material. According to Einstein, energy conservation allows one to determine the energy of an electron inside the sample, provided the energy of the light photon and kinetic energy of the outgoing photoelectron are known. Momentum conservation makes it also possible to estimate k relating it to the momentum of the photoelectron by measuring the angle at which the photoelectron left the surface. The modern version of this technique is called Angle-Resolved Photoemission Spectroscopy (ARPES) and exploits both conservation laws in order to determine the electronic structure, i.e. energy and momentum of electrons inside the solid. In order to resolve the details crucial for understanding the topical problems of condensed matter physics, three quantities need to be minimized: uncertainty* in photon energy, uncertainty in kinetic energy of photoelectrons and temperature of the sample. In our approach we combine three recent achievements in the field of synchrotron radiation, surface science and cryogenics. We use synchrotron radiation with tunable photon energy contributing an uncertainty of the order of 1 meV, an electron energy analyzer which detects the kinetic energies with a precision of the order of 1 meV and a He(3) cryostat which allows us to keep the temperature of the sample below 1 K. We discuss the exemplary results obtained on single crystals of Sr2RuO4 and some other materials. The electronic structure of this material can be determined with an unprecedented clarity.