Functionalized Crystalline N-Trimethyltriindoles: Counterintuitive Influence of Peripheral Substituents on Their Semiconducting Properties.

Three crystalline N-trimethyltriindoles endowed with different functionalities at 3, 8 and 13 positions (either unsubstituted or with three methoxy or three acetyl groups attached) are investigated, and clear correlations between the electronic nature of the substituents and their solid-state organization, electronic properties and semiconductor behavior are established. The three compounds give rise to similar columnar hexagonal crystalline structures; however, the insertion of electron-donor methoxy groups results in slightly shorter stacking distances when compared with the unsubstituted derivative, whereas the insertion of electron-withdrawing acetyl groups lowers the crystallinity of the system. Functionalization significantly affects hole mobilities with the triacetyl derivative showing the lowest mobility within the series in agreement with the lower degree of order. However, attaching three methoxy groups also results in lower hole mobility values in the OFETs (0.022 vs. 0.0014 cm2 V-1 s-1) in spite of the shorter stacking distances. This counterintuitive behavior has been explained with the help of DFT calculations performed to rationalize the interplay between the intramolecular and intermolecular properties, which point to lower transfer integrals in the trimethoxy derivative due to the HOMO wave function extension over the peripheral methoxy groups. The results of this study provide useful insights into how peripheral substituents influence the fundamental charge transport parameters of chemically modified triindole platforms of fundamental importance to design new derivatives with improved semiconducting performance.

The Effect of Auxiliary Nitrogenated Linkers on the Design of New Cadmium-Based Coordination Polymers as Sensors for the Detection of Explosive Materials.

Three new cadmium-based coordination polymers, denoted [Cd(hfipbb)(4,4'-bipy)] (CdPF-1), [Cd(hfipbb)(2,2'-bipy)] (CdPF-2), and [Cd(hfipbb)(1,10-phen)] (CdPF-3), have been hydrothermally synthesized by using the well-known V-shaped organic linker 4,4'-(hexafluoroisopropylidene)bis(benzoic acid) (H2 hfipbb), together with different nitrogenated auxiliary linkers. Considering the d10 configuration of the transition metal selected, the luminescent properties for these CdPF-n materials were explored, finding that materials CdPF-2 and CdPF-3 act as excellent sensors in the detection of explosive nitro aromatic compounds. The photoluminescence properties of CdPF-2 and CdPF-3 revealed that significant and sensitive fluorescence quenching was observed toward NP (nitrophenol) for CdPF-2 and PA (picric acid) for CdPF-3 in MeOH suspensions.

Untangling the Mechanochromic Properties of Benzothiadiazole-Based Luminescent Polymorphs through Supramolecular Organic Framework Topology.

Two new luminophore polymorphs of 4-bromo-7-(4-nonylphenyl)benzo[c][1,2,5]thiadiazole (1α and 1ß) exhibiting different color emissions, which switch into each other in response to shear force and solvent vapors, are presented and their X-ray structure is determined. Supramolecular organic framework topology (SOFT) studies on the two polymorphic structures led us to conclude that the mechanochromic phase transformation can be explained on the basis of modifications in their respective topological nets: mab and pcu for 1α and 1ß, respectively, as a result of the breaking and restoration of a number of weak supramolecular interactions. The color changes accompanying this transformation have been rationalized with the help of time-dependent density functional theory. We firmly believe that our findings will inspire future research on the design of novel stimuli-responsive organic materials with switchable properties based on their supramolecular interactions by establishing clear SOFT-property relationships.

High-Mobility Self-Assembling Truxenone-Based n-Type Organic Semiconductors.

The synthesis, self-assembly, and semiconducting properties of a series of disk-like truxenone derivatives, functionalized with three peripheral long alkyl chains, either directly attached or distanced by linking phenyl or ethynyl groups, are reported. The strategy of distancing the alkyl chains from the central aromatic cores induces in these discotics well-ordered columnar assemblies and has a favorable effect on their charge-carrier mobility. Electron mobility values above 1 cm2 V-1 S-1 were determined for a truxenone functionalized with three peripheral decynyl chains by means of the space charge-limited current technique. DFT calculations help to rationalize the high mobility values found for these new truxenone-based systems, indicating efficient intermolecular electronic couplings (fostered by a favorable stacking configuration) and moderate intramolecular reorganization energies for electrons in the origin of such high mobilities.

Modelling charge transport of discotic liquid-crystalline triindoles: the role of peripheral substitution.

We have performed a multiscale approach to study the influence of peripheral substitution in the semiconducting properties of discotic liquid-crystalline triindoles. Charge carrier mobility as high as 1.4 cm2 V-1 s-1 was experimentally reported for triindoles substituted with alkynyl chains on the periphery (Gómez-Lor et al. Angew. Chem., Int. Ed., 2011, 50, 7399-7402). In this work, our goal is to get a deeper understanding of both the molecular electronic structure and microscopic factors affecting the charge transport properties in triindoles as a function of the spacer group connecting the central cores with the external alkyl chains (i.e., alkyne or phenyl spacers groups). To this end, we first perform Quantum Mechanical (QM) calculations to assess how the peripheral substitution affects the electronic structure and the internal reorganization energy. Secondly, boxes of stacked molecules were built and relaxed through molecular dynamics to obtain realistic structures. Conformational analysis and calculations of transfer integrals for closed neighbours were performed. Our results show that the insertion of ethynyl spacers between the central aromatic core and the flexible peripheral chains results in lower reorganization energies and enhanced intermolecular order within the stacks with a preferred cofacial 60° staggered conformation, which would result in high charge-carrier mobilities in good agreement with the experimental data. This work allows a deeper understanding of charge carrier mobility in columnar phases, linking the structural order at the molecular level to the property of interest, i.e. the charge carrier mobility. We hope that this understanding will improve the design of systems at the supramolecular level aiming at obtaining a more defined conducting channel, higher mobility and smaller fluctuations within the column.

Saddle-Shaped Cyclic Indole Tetramers: 3D Electroactive Molecules.

We present a joint theoretical and experimental study of a series of cyclic indole tetramers aimed at understanding the fundamental electronic properties of this 3D platform and evaluating its potential in the construction of new semiconductors. To this end, we combined absorption and Raman spectroscopy, cyclic voltammetry, and spectroelectrochemistry with DFT calculations. Our results suggest that this platform can be easily and reversibly oxidized. Additionally, it has a HOMO that matches very well with the workfunction of gold, therefore charge injection from a gold electrode is expected to occur without significant barriers. Interestingly, the cyclic tetraindoles allow for good electron delocalization in spite of their saddle-shaped structures. The steric constraints introduced by N-substitution significantly inhibits ring inversion of the central cyclooctatetraene unit, whereas it only barely affects the optical and electrochemical properties (a slightly higher oxidation potential and a blueshifted absorption upon alkylation are observed).

Fullerenes from aromatic precursors by surface-catalysed cyclodehydrogenation.

Graphite vaporization provides an uncontrolled yet efficient means of producing fullerene molecules. However, some fullerene derivatives or unusual fullerene species might only be accessible through rational and controlled synthesis methods. Recently, such an approach has been used to produce isolable amounts of the fullerene C(60) from commercially available starting materials. But the overall process required 11 steps to generate a suitable polycyclic aromatic precursor molecule, which was then dehydrogenated in the gas phase with a yield of only about one per cent. Here we report the formation of C(60) and the triazafullerene C(57)N(3) from aromatic precursors using a highly efficient surface-catalysed cyclodehydrogenation process. We find that after deposition onto a platinum (111) surface and heating to 750 K, the precursors are transformed into the corresponding fullerene and triazafullerene molecules with about 100 per cent yield. We expect that this approach will allow the production of a range of other fullerenes and heterofullerenes, once suitable precursors are available. Also, if the process is carried out in an atmosphere containing guest species, it might even allow the encapsulation of atoms or small molecules to form endohedral fullerenes.

Columnar Mesomorphism in a Methylthio-Decorated Triindole for Enhanced Charge Transport.

We report a semiconducting triindole-based discotic liquid crystal (TRISMe) functionalized with six p-methylthiophenyl groups at its periphery. While initially a crystalline solid at room temperature, TRISMe transitions to a columnar hexagonal mesophase upon heating and retains this supramolecular organization upon subsequent cooling, despite having only three flexible alkyl chains attached to the core's nitrogens. The incorporation of methylthio groups effectively hinders tight molecular packing, stabilizing the columnar arrangement of this disk-shaped molecule. Single crystal analysis confirmed the high tendency of this compound to organize into a columnar architecture and the role played by the methylthio groups in reinforcing such structure. The mesomorphic behavior of TRISMe provides an opportunity for processing from its molten state. Notably, our research reveals significant differences in charge transport depending on the processing method, whether solution drop-casting or melt-based. TRISMe shows hole mobility values averaging 3 × 10-1 cm2 V-1 s-1 when incorporated in diode-type devices from the isotropic melt and annealed at the mesophase temperature, estimated by SCLC (space-charge-limited current) measurements. However, when integrated into solution-processed organic field-effect transistors (OFETs), crystalline TRISMe exhibits a hole mobility of 3 × 10-4 cm2 V-1 s-1. The observed differences can be attributed to a beneficial supramolecular assembly achieved in the mesophase in spite of its lower order. These results emphasize the material's potential for applications in easy-to-process electronic devices and highlight the potential of methylthio moieties in promoting columnar mesophases.

Solvent-dependent truxene-based nanostructures.

Three truxene derivatives functionalized with alkyl chains, either attached directly or distanced by linking phenyl or ethynyl groups, self-assemble in solution and induce the gelation of different solvents in spite of not being endowed with groups able to establish strong directional interactions. A (1)H NMR study points to face-to-face alternating π-stacked motifs at the origin of nucleation. Solvents play an important role in modulating the aggregation of these derivatives giving rise to fibrous or spherical superstructures. Analysis of the influence of different solvents on the morphology of the aggregates provides a better understanding of the various stages of the hierarchical self-assembly. The way in which alkyl chains are attached to the central core also strongly affects the self-assembling properties and gelation ability of this series. Phenyl spacers present the highest association constants in solution and give rise to gelation in a broader range of solvents. This behavior has been rationalized by means of (1)H NMR spectroscopy, X-ray powder diffraction, SEM, and photophysical measurements. Interestingly, it was found that these compounds in the gel state exhibit unusual emission properties most likely arising from the formation of excimers, which evidences that π-π interactions also occur in the excited state.

Nonlinear optical thin film device from a chiral octopolar phenylacetylene liquid crystal.

A set of chiral discotic phenylacetylenes have been synthesized by 3-fold Sonogashira coupling between different ethynylbenzenes and triiodobenzenes. The resultant bulk materials are fully characterized by polarized optical microscopy (POM), differential scanning calorimetry (DSC), and X-ray diffraction. The octopolar nature of the target compounds is studied by UV-vis absorption spectroscopy and hyper-Raleigh scattering in solution. Optimization of the donor-acceptor substitution yields both high hyperpolarizability values and appreciable mesomorphic properties. A simple thin film device for second harmonic generation has been prepared from the nitro-substituted liquid crystalline derivative.

Highly emissive supramolecular gold(I)-BTD materials.

Herein we report the synthesis of three light emitting rod-shaped gold(I) complexes by combining ethynyl-functionalized 2,1,3-benzothiadiazole (BTD), with different N-heterocyclic (imidazole, benzimidazole and phenantroimidazole) carbene gold(I) complexes. As could be determined by single crystal structure determination, the size of the N-heterocyclic carbene affects the relative disposition of the two ligands in the linear gold complexes (nearly perpendicular in the benzimidazole vs. planar in the phenantroimidazole derivative) which translates to different types of interactions between neighbouring units. In fact, the planar conformation in the more π-extended phenantroimidazole carbene allows Au(I) atoms to get sufficiently closer favouring aurophilic interactions. This compound is obtained as two different colour emitting solids which is ascribed to changes in packing modes probably leading to differences in the strength of aurophilic interactions. Interestingly, while the emission in the solid state is almost quenched, the incorporation of the compounds in polymer matrixes enhances the emissive properties of the compounds reaching near unity quantum yields.

Self-assembly of C3-symmetrical hexaaryltriindoles driven by solvophobic and CH-pi interactions.

The synthesis and aggregation properties of a series of differently substituted star-shaped hexaaryltriindoles both in solution and in the solid state are being reported. While these molecules do not show any significant intermolecular aggregation in CDCl(3), it has been possible to induce aggregation by increasing the polarity of the solvent and therefore facilitating the occurrence of solvophobic forces. A study of the influence of the electronic character of peripheral substituents on the self-association behavior in solution has shown that increasing the electron-donor character of the substituents facilitates self-association while derivatives substituted with electron-acceptor substituents do not self-assemble. The electronic nature of the substituents also has an influence in the geometry of the stacking of these derivatives observed in the solid state. While unsubstituted hexaphenyl triindole self-assemble in a staggered face-to-face arrangement, attaching six cyano functional groups results in an offset stacking. The influence of the substituents in the strength and geometry of the stacking tendency contrasts with the trend expected for an aggregation induced solely by pi-pi interactions, but can be explained considering an important contribution of multiple cooperative CH-pi interactions.

Stimuli-Responsive Benzothiadiazole Derivative as a Dopant for Rewritable Polymer Blends.

A new rod-shaped benzothiadiazole fluorophore, namely, 4,7-di-(4-nonylphenyl)benzo[c][1,2,5]thiadiazole, which strongly emits fluorescence both in solution and in solid state has been synthesized, and its photophysical properties were rationalized with the help of density functional theory calculations. This molecule crystallizes in two distinct light-emitting crystalline phases, which can be interconverted in response to pressure, temperature, and solvent vapors. Powder X-ray diffraction indicates that in both polymorph, molecules adopt a lamellar packing, the different interlayer spacing being the main difference between the two structures. Single-crystal analysis of one of the polymorphs allows us to identify weak interaction planes, which presumably facilitates the polymorphic transformation through mechanically or thermally induced sliding processes. The polymorphic transformation and the origin of the switchable fluorescence have been rationalized through a spectroscopic and theoretical study. This study suggests that the different colors observed are due to different intermolecular aromatic interactions owing to the displacement of the molecules with respect to the layer normal. Interestingly, blending this molecule with a biodegradable polymer such as poly(vinyl alcohol) gives rise to a thermally activated reversible switchable fluorescent system, which entitles this material as an attractive candidate for technological applications, such as thermal sensors, security inks, or rewritable paper.

A new scandium metal organic framework built up from octadecasil zeolitic cages as heterogeneous catalyst.

Zeolitic cages of the AST type are found in the novel scandium-squarate MOF, and the joining of them gives rise to a new binodal network with a unique topology; this new material is an efficient heterogeneous Lewis acid catalyst.

Synthesis and self-association properties of functionalized C3-symmetric hexakis(p-substituted-phenylethynyl)triindoles.

A number of differently substituted phenylethynyl triindoles has been synthesized by 6-fold Sonogashira coupling in a key step. This new series of hexaalkynyl triindoles self-associate through arene-arene interactions in solution. The electronic communication of the external substituents with the central electron-rich triindole core has been demonstrated by means of cyclic voltammetry and optical absorption. A study of the effect of the electronic character of peripheral substituents on their self-association behavior is presented in an effort to shed light on the nature of the pi-stacking interactions.

Two-dimensional hybrid germanium zeotype formed by selective coordination of the trans-1,2-diaminocyclohexane isomer to the ge atom: heterogeneous acid-base bifunctional catalyst.

[C 6H 10(NH 2) 2Ge 3O 6] ICMM9 is a two-dimensional germanate in which the metallic atoms are covalently bonded to chelating diamines. Its layered structure having some similitude with that of the pyroxene mineral, presents a totally new topology with two 4-c nodes. The solvothermal synthesis reaction allows the separation in situ of the two 1,2-diaminocyclohexane isomers by selective coordination of the trans isomer to octahedral Ge atoms of the ICMM9 framework. This material behaves as an active and selective heterogeneous acid-base bifunctional catalyst.

Fluorescent and Electroactive Monoalkyl BTD-Based Liquid Crystals with Tunable Self-Assembling and Electronic Properties.

We report here on a series of redox active benzothiadiazole-based luminophores functionalized on one edge with a phenyl-nonyl substituent, which confers these molecules a rodlike shape and a tendency to self-assemble into layered superstructures. On the other edge, the molecules are endowed with different p-substituted phenyl rings, which allows the modulation of their redox and optical properties on the basis of the electronic nature of the terminal substituents. We have found that just one lateral alkyl chain is sufficient to induce mesomorphism in these molecules, which present nematic or smectic mesophases upon thermal treatment. Single-crystal analysis allows us to get an insight into the nature of the forces responsible for different supramolecular assemblies in these derivatives, and point to a strong contribution of the terminal groups in the different arrangements observed. The interesting redox and optical properties together with their self-assembling tendencies render these new materials interesting candidates for optoelectronics.

Electroactive C3 symmetric discotic liquid-crystalline triindoles.

Discotic liquid crystals based on triindole, a novel redox active central core, have been synthesized and their mesomorphic behaviour investigated.

Mobility versus Alignment of a Semiconducting π-Extended Discotic Liquid-Crystalline Triindole.

The p-type semiconducting properties of a triphenylene-fused triindole mesogen, have been studied by applying two complementary methods which have different alignment requirements. The attachment of only three flexible alkyl chains to the nitrogen atoms of this π-extended core is sufficient to induce columnar mesomorphism. High hole mobility values (0.65 cm2 V-1 s-1) have been estimated by space-charge limited current (SCLC) measurements in a diode-like structure which are easily prepared from the melt, rendering this material a good candidate for OPVs and OLEDs devices. The mobility predicted theoretically via a hole-hopping mechanism is in very good agreement with the experimental values determined at the SCLC regime. On the other hand the hole mobility determined on solution processed thin film transistors (OFETs) is significantly lower, which can be rationalized by the high tendency of these large molecules to align on surfaces with their extended π-conjugated core parallel to the substrate as demonstrated by SERS. Despite the differences obtained with the two methods, the acceptable performance found on OFETs fabricated by simple drop-casting processing of such an enlarged aromatic core is remarkable and suggests facile hopping between neighboring molecular columns owing to the large conducting/isolating ratio found in this discotic compound.