RESUMO
BACKGROUND: Polyphenols are a group of compounds found in grapes, musts, and wines. Their levels are crucial for grape ripening, proper must fermentation, and final wine characteristics. Standard chemical analysis is commonly used to detect these compounds, but it is costly, time consuming, and requires specialized laboratories and operators. To address this, this study explores a functionalized acoustic sensor for detecting oenological polyphenols. RESULTS: The method involves utilizing a quartz crystal microbalance with dissipation monitoring (QCM-D) to detect the target analyte by using a gelatin-based probe layer. The sensor is functionalized by optimizing the probe coverage density to maximize its performance. This is achieved by using 12-mercaptododecanoic acid (12-MCA) to immobilize the probe onto the gold sensor surface, and dithiothreitol (DTT) as a reducing and competitive binding agent. The concentration of 12-MCA and DTT in the solutions is varied to control the probe density. QCM-D measurements demonstrate that the probe density can be effectively adjusted using this approach, ranging from 0.2 × 1013 to 2 × 1013 molecules cm-2 . This study also investigates the interaction between the probe and tannins, confirming the ability of the sensor to detect them. Interestingly, the lower probe coverage achieves higher detection signals when normalized to probe immobilization signals. Moreover, significant changes in mechanical properties of the functionalization layer are observed after the interaction with samples. CONCLUSION: The combination of QCM-D with gelatin functionalization holds great promise for future applications in the wine industry. It offers real-time monitoring capabilities, requires minimal sample preparation, and provides high sensitivity for quality control purposes. © 2024 Society of Chemical Industry.
RESUMO
Intranasal drug delivery is convenient and provides a high bioavailability but requires the use of mucoadhesive nanocarriers. Chitosan is a well-established polymer for mucoadhesive applications but can suffer from poor cytocompatibility and stability upon administration. In this work, we present a method to obtain stable and cytocompatible crosslinked chitosan nanoparticles. We used 2,6-pyridinedicarboxylic acid as a biocompatible crosslinker and compared the obtained particles with those prepared by ionotropic gelation using sodium tripolyphosphate. Nanoparticles were tested to evaluate the size and the surface charge, as well as their stability in storage conditions (4 °C), at the nasal cavity temperature (32 °C), and at the body temperature (37 °C). The crosslinked chitosan nanoparticles showed a size around 150 nm and a surface charge of 10.3 mV ± 0.9 mV, both compatible with the intranasal drug administration. Size and surface charge parameters did not significantly vary over time, indicating the good stability of these nanoparticles. We finally tested their cytocompatibility in vitro using SHSY5Y human neuroblastoma and RPMI 2650 human nasal epithelial cells, with positive results. In conclusion, the proposed synthetic system shows an interesting potential as a drug carrier for intranasal delivery.
Assuntos
Quitosana , Nanopartículas , Humanos , Administração Intranasal , Adesivos , Sistemas de Liberação de Medicamentos/métodos , Portadores de Fármacos , Tamanho da PartículaRESUMO
A wide class of biosensors can be built via functionalization of gold surface with proper bio conjugation element capable of interacting with the analyte in solution, and the detection can be performed either optically, mechanically or electrically. Any change in physico-chemical environment or any slight variation in mass localization near the surface of the sensor can cause differences in nature of the transduction mechanism. The optimization of such sensors may require multiple experiments to determine suitable experimental conditions for the immobilization and detection of the analyte. Here, we employ molecular modeling techniques to assist the optimization of a gold-surface biosensor. The gold surface of a quartz-crystal-microbalance sensor is functionalized using polymeric chains of poly(ethylene glycol) (PEG) of 2 KDa molecular weight, which is an inert long chain amphiphilic molecule, supporting biotin molecules (bPEG) as the ligand molecules for streptavidin analyte. The PEG linkers are immobilized onto the gold surface through sulphur chemistry. Four gold surfaces with different PEG linker density and different biotinylation ratio between bPEG and PEG, are investigated by means of state-of-the art atomistic simulations and compared with available experimental data. Results suggest that the amount of biotin molecules accessible for the binding with the protein increases upon increasing the linkers density. At the high density a 1:1 ratio of bPEG/PEG can further improve the accessibility of the biotin ligand due to a strong repulsion between linker chains and different degree of hydrophobicity between bPEG and PEG linkers. The study provides a computaional protocol to model sensors at the level of single molecular interactions, and for optimizing the physical properties of surface conjugated ligand which is crucial to enhance output of the sensor.
RESUMO
Peripheral nerve injuries are a common condition in which a nerve is damaged, affecting more than one million people every year. There are still no efficient therapeutic treatments for these injuries. Artificial scaffolds can offer new opportunities for nerve regeneration applications; in this framework, chitosan is emerging as a promising biomaterial. Here, we set up a simple and effective method for the production of micro-structured chitosan films by solvent casting, with high fidelity in the micro-pattern reproducibility. Three types of chitosan directional micro-grooved patterns, presenting different levels of symmetricity, were developed for application in nerve regenerative medicine: gratings (GR), isosceles triangles (ISO) and scalene triangles (SCA). The directional patterns were tested with a Schwann cell line. The most asymmetric topography (SCA), although it polarized the cell shaping less efficiently, promoted higher cell proliferation and a faster cell migration, both individually and collectively, with a higher directional persistence of motion. Overall, the use of micro-structured asymmetrical directional topographies may be exploited to enhance the nerve regeneration process mediated by chitosan scaffolds.
Assuntos
Quitosana/química , Membranas/química , Regeneração Nervosa , Neurilemoma/terapia , Células de Schwann/citologia , Cicatrização , Movimento Celular , Proliferação de Células , Humanos , Neurilemoma/patologiaRESUMO
The interactions that nanoparticles have with blood proteins are crucial for their fate in vivo. Such interactions result in the formation of the protein corona around the nanoparticles, and studying them aids in nanoparticle optimization. Quartz crystal microbalance with dissipation monitoring (QCM-D) can be used for this study. The present work proposes a QCM-D method to study the interactions on polymeric nanoparticles with three different human blood proteins (albumin, fibrinogen and γ-globulin) by monitoring the frequency shifts of sensors immobilizing the selected proteins. Bare PEGylated and surfactant-coated poly-(D,L-lactide-co-glycolide) nanoparticles are tested. The QCM-D data are validated with DLS and UV-Vis experiments in which changes in the size and optical density of nanoparticle/protein blends are monitored. We find that the bare nanoparticles have a high affinity towards fibrinogen and γ-globulin, with measured frequency shifts around -210 Hz and -50 Hz, respectively. PEGylation greatly reduces these interactions (frequency shifts around -5 Hz and -10 Hz for fibrinogen and γ-globulin, respectively), while the surfactant appears to increase them (around -240 Hz and -100 Hz and -30 Hz for albumin). The QCM-D data are confirmed by the increase in the nanoparticle size over time (up to 3300% in surfactant-coated nanoparticles), measured by DLS in protein-incubated samples, and by the trends of the optical densities, measured by UV-Vis. The results indicate that the proposed approach is valid for studying the interactions between nanoparticles and blood proteins, and the study paves the way for a more comprehensive analysis of the whole protein corona.
Assuntos
Nanopartículas , Coroa de Proteína , Humanos , Técnicas de Microbalança de Cristal de Quartzo/métodos , Nanopartículas/química , Fibrinogênio/química , Albuminas , Tensoativos , gama-GlobulinasRESUMO
Small hydrophilic drugs are widely used for systemic administration, but they suffer from poor absorption and fast clearance. Their nanoencapsulation can improve biodistribution, targeted delivery, and pharmaceutical efficacy. Hydrophilics are effectively encapsulated in compartmented particles, such as liposomes or extracellular vesicles, which are biocompatible but poorly customizable. Polymeric vectors can form compartmental structures, also being functionalizable. Here, we report a system composed of polymeric stabilized reversed micelles for hydrophilic drugs encapsulation. We optimized the preparation procedure, and calculated the critical micellar concentration. Then, we developed a strategy for stabilization that improves micelle stability upon dilution. We tested the drug loading and delivery capabilities with creatine as a drug molecule. Prepared stabilized reversed micelles had a size of around 130 nm and a negative z-potential around -16 mV, making them functional as a drug carrier. The creatine cargo increased micelle size and depended on the loading conditions. The higher amount of loaded creatine was around 60 µg/mg of particles. Delivery tests indicated full release within three days in micelles with the lower cargo, while higher loadings can provide a sustained release for longer times. Obtained results are interesting and encouraging to test the same system with different drug cargoes.
RESUMO
Over the past decade, a large number of strategies and technologies have been developed to reduce heart failure progression. Among these, cardiac tissue engineering is one of the most promising. Aim of this study is to develop a 3D scaffold to treat cardiac failure. A new three-block copolymer, obtained from δ-valerolactone and polyoxyethylene, was synthesised under high vacuum without catalyst. Copolymer/gelatine blends were microfabricated to obtain a ECM-like geometry. Structures were studied under morphological, mechanical, degradation and biological aspects. To prevent left ventricular remodelling, constructs were biofunctionalises with molecularly imprinted nanoparticles towards the matrix metalloproteinase MMP-9. Results showed that materials are able to reproduce the ECM structure with high resolution, mechanical properties were in the order of MPa similar to those of the native myocardium and cell viability was verified. Nanoparticles showed the capability to rebind MMP-9 (specific rebinding 18.67) and to be permanently immobilised on the scaffold surface.
Assuntos
Biomimética , Infarto do Miocárdio/patologia , Polímeros/química , Alicerces Teciduais , Remodelação Ventricular , Humanos , Metaloproteinase 9 da Matriz/metabolismo , Impressão Molecular , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Polyphenols are a family of compounds present in grapes, musts, and wines. Their dosage is associated with the grape ripening, correct must fermentation, and final wine properties. Owing to their anti-inflammatory properties, they are also relevant for health applications. To date, such compounds are detected mainly via standard chemical analysis, which is costly for constant monitoring and requires a specialized laboratory. Cheap and portable sensors would be desirable to reduce costs and speed up measurements. This paper illustrates the development of strategies for sensor surface chemical functionalization for polyphenol detection. We perform measurements by using a commercial quartz crystal microbalance with dissipation monitoring apparatus. Chemical functionalizations are based on proteins (bovine serum albumin and gelatin type A) or customized peptides derived from istatine-5 and murine salivary protein-5. Commercial oenological additives containing pure gallic tannins or proanthocyanidins, dissolved in water or commercial wine, are used for the analysis. Results indicate that selected functionalizations enable the detection of the two different tannin families, suggesting a relationship between the recorded signal and concentration. Gelatin A also demonstrates the ability to discriminate gallic tannins from proanthocyanidins. Outcomes are promising and pave the way for the exploitation of such devices for precision oenology.
RESUMO
A rationally designed gold-functionalized surface capable of capturing a target protein is presented using the biotin-streptavidin pair as a proof-of-concept. We carried out multiscale simulations to shed light on the binding mechanism of streptavidin on four differently biotinylated surfaces. Brownian Dynamics simulations were used to reveal the preferred initial orientation of streptavidin over the surfaces, whereas classical molecular dynamics was used to refine the binding poses and to investigate the fundamental forces involved in binding, and the binding kinetics. We assessed the binding events and the stability of the streptavidin attachment through a quartz crystal microbalance with dissipation monitoring (QCM-D). The sensing element comprises of biotinylated polyethylene glycol chains grafted on the sensor's gold surface via thiol-Au chemistry. Finally, we compared the results from experiments and simulations. We found that the confined biotin moieties can specifically capture streptavidin from the liquid phase and provide guidelines on how to exploit the microscopic parameters obtained from simulations to guide the design of further biosensors with enhanced sensitivity.
RESUMO
Enzyme detection in liquid samples is a complex laboratory procedure, based on assays that are generally time- and cost-consuming, and require specialized personnel. Surface acoustic wave sensors can be used for this application, overcoming the cited limitations. To give our contribution, in this work we present the bottom-up development of a surface acoustic wave biosensor to detect active α-glycosidase in aqueous solutions. Our device, optimized to work at an ultra-high frequency (around 740 MHz), is functionalized with a newly synthesized probe 7-mercapto-1-eptyl-D-maltoside, bringing one maltoside terminal moiety. The probe is designed ad hoc for this application and tested in-cuvette to analyze the enzymatic conversion kinetics at different times, temperatures and enzyme concentrations. Preliminary data are used to optimize the detection protocol with the SAW device. In around 60 min, the SAW device is able to detect the enzymatic conversion of the maltoside unit into glucose in the presence of the active enzyme. We obtained successful α-glycosidase detection in the concentration range 0.15-150 U/mL, with an increasing signal in the range up to 15 U/mL. We also checked the sensor performance in the presence of an enzyme inhibitor as a control test, with a signal decrease of 80% in the presence of the inhibitor. The results demonstrate the synergic effect of our SAW Lab-on-a-Chip and probe design as a valid alternative to conventional laboratory tests.
Assuntos
Técnicas Biossensoriais , Glicosídeo Hidrolases , Som , Técnicas Biossensoriais/métodos , Dispositivos Lab-On-A-ChipRESUMO
A chromogenically reversible, mechanochromic pressure sensor is integrated into a mininvasive surgical grasper compatible with the da Vinci robotic surgical system. The sensorized effector, also featuring two soft-material jaws, encompasses a mechanochromic polymeric inset doped with functionalized spiropyran (SP) molecule, designed to activate mechanochromism at a chosen pressure and providing a reversible color change. Considering such tools are systematically in the visual field of the operator during surgery, color change of the mechanochromic effector can help avoid tissue damage. No electronics is required to control the devised visual feedback. SP-doping of polydimethylsiloxane (2.5:1 prepolymer/curing agent weight ratio) permits to modulate the mechanochromic activation pressure, with lower values around 1.17 MPa for a 2% wt. SP concentration, leading to a shorter chromogenic recovery time of 150 s at room temperature (25 °C) under green light illumination. Nearly three-times shorter recovery time is observed at body temperature (37 °C). To the best of knowledge, this study provides the first demonstration of mechanochromic materials in surgery, in particular to sensorize unpowered surgical effectors, by avoiding dramatic increases in tool complexity due to additional electronics, thus fostering their application. The proposed sensing strategy can be extended to further tools and scopes.
Assuntos
Desenho de Equipamento/métodos , Retroalimentação Sensorial , Procedimentos Cirúrgicos Robóticos/métodos , Percepção Visual , Cor , Interface Usuário-ComputadorRESUMO
Since theoretical models provide data that cannot be otherwise gathered, numerical methods applied to medical devices analysis have emerged as fundamental tool in preclinical development. Large efforts were done to study mechanical and drug-eluting properties in stents but often the coating modelling is neglected. This work presents a finite element framework to calculate mechanical loads and drug distribution in three commercial drug-eluting stents (Palmaz-Schatz, Palmaz Genesis and Multi Link Vision), to check coatings strength and drug distribution maps in biological tissues. The promising copolymer poly(methylmethacrylate-co-n-butylmethacrylate), loaded with paclitaxel, is analyzed. Results demonstrated that the coating undergoes localized plastic phenomena, and calculated stresses are lower than the ultimate stress, ensuring coating integrity. Computed drug concentration depends on stent geometry and its values are in all cases lower than the toxicity level for this drug.
Assuntos
Stents Farmacológicos , Paclitaxel , Liberação Controlada de Fármacos , Humanos , Polímeros , StentsRESUMO
The general misconception that γ-lactones are not thermodynamically polymerizable has limited the development of all γ-lactone-based copolymers. A few studies have reported copolymerization of these five-membered cyclic esters with more reactive monomers, yet a systematic investigation of kinetics and thermodynamics is still lacking. To explore the feasibility of the reaction, we combined equilibrium and non-isothermal syntheses for the copolymerization of γ-valerolactone with ϵ-caprolactone, initiated with methoxy polyethyleneglycol and catalyzed by Tin(II) 2-ethylhexanoate. Here, we present the polymerization kinetic and thermodynamic parameters for different monomer ratios in the reaction feed. We observed the dependency of enthalpy and entropy of polymerization upon monomer ratio changes, and estimated a linear increase in the activation energy by increasing the γ-valerolactone fraction in the starting monomer mixture. Our data demonstrate that γ-valerolactone can copolymerize with ϵ-caprolactone, but only under specific conditions. The reaction parameters determined in this study will enable preparation of additional γ-valerolactone-based copolymers and development of a family of degradable materials with improved properties in respect to commonly used polyesters.
Assuntos
Caproatos/química , Lactonas/química , Polimerização , Cinética , Modelos Lineares , Conformação Molecular , TermodinâmicaRESUMO
BACKGROUND: The brain is a well-protected organ, with a complex system of cells, proteins and transporters, that acts as a sentinel to prevent potentially harmful substances from entering the brain, stopping also active molecules administered with a therapeutic goal. Although their limited exploitation, dendrimers are currently under evaluation as drug vectors to improve pharmacological treatments, targeting active molecules across the blood-brain barrier and penetrating brain tissues. METHODS: Up to date, only three different families of dendrimers, poly(amidoamine)-, poly(propyleneimine)- and poly(L-lysine)-based, have found application as drug transporters in the Central Nervous System. Their development, functionalization and characterization are reported in the literature, with interesting preliminary outcomes in the treatment of brain disorders. Surface functionalization also affects the interaction between dendrimers and cells or tissues, with effects not only on penetration and retention, but also on the safety profile of this drug carrier. CONCLUSION: This review focuses on the application of dendrimers in the field of targeted drug delivery toward the Central Nervous System, highlighting their interesting properties. Discussion will be promising and represent an important starting point for a further diffusion of dendrimers in pharmacological treatment of the Central Nervous System.
Assuntos
Doenças do Sistema Nervoso Central/tratamento farmacológico , Dendrímeros/administração & dosagem , Portadores de Fármacos , Dendrímeros/farmacocinética , Humanos , Distribuição TecidualRESUMO
In drug targeting, the urgent need for more effective and less iatrogenic therapies is pushing toward a complete revision of carrier setup. After the era of 'articles used as homing systems', novel prototypes are now emerging. Newly conceived carriers are endowed with better biocompatibility, biodistribution and targeting properties. The biomimetic approach bestows such improved functional properties. Exploiting biological molecules, organisms and cells, or taking inspiration from them, drug vector performances are now rapidly progressing toward the perfect carrier. Following this direction, researchers have refined carrier properties, achieving significant results. The present review summarizes recent advances in biomimetic and bioinspired drug vectors, derived from biologicals or obtained by processing synthetic materials with a biomimetic approach.
Assuntos
Materiais Biomiméticos , Sistemas de Liberação de Medicamentos , Nanopartículas , Humanos , Distribuição TecidualRESUMO
BACKGROUND: The brain is the most protected organ in the human body; its protective shield, relying on a complex system of cells, proteins and transporters, prevents potentially harmful substances from entering the brain from the bloodstream but, on the other hand, it also stops drugs administered via the systemic route. To improve the efficacy of pharmacological treatments, targeted drug delivery by means of polymer nanoparticles is a challenging but, at the same time, efficient strategy. METHODS: Thanks to a highly multidisciplinary approach, several ways to overcome the brain protection have provided effective solutions to treat a large number of diseases. Important advances in polymer science, together with the development of novel techniques for nanocarrier preparation, and the discovery of novel targeting ligands and molecules, allow a fine-tuning of size, shape, chemicophysical properties and surface chemistry of functional particulate systems; it enables the improvement of the therapeutic performances for several drugs, also toward districts that are difficult to be treated, such as the brain. CONCLUSION: This review focuses on the great strides made from scientists and doctors in the development of polymer nano-sized drug delivery systems for brain diseases. Even though the optimal nanocarrier was not yet discovered, important advances were made to strive for safer, performant and successful systems, with the expectation to find soon better solutions to cure some still untreatable pathologies.
Assuntos
Doenças do Sistema Nervoso Central/tratamento farmacológico , Sistemas de Liberação de Medicamentos , Nanopartículas/química , Polímeros/química , Animais , Barreira Hematoencefálica/efeitos dos fármacos , Doenças do Sistema Nervoso Central/patologia , Portadores de Fármacos/química , Humanos , Polímeros/síntese químicaRESUMO
Biodegradable polymer nanoparticles are promising carriers for targeted drug delivery in nanomedicine applications. Molecu- lar imprinting is a potential strategy to target polymer nanoparticles through binding of endogenous ligands that may promote recognition and active transport into specific cells and tissues. However, the lock-and-key mechanism of molecular imprinting requires relatively rigid cross-linked structures, unlike those of many biodegradable polymers. To date, no fully biodegradable molecularly imprinted particles have been reported in the literature. This paper reports the synthesis of a novel molecularly- imprinted nanocarrier, based on poly(lactide-co-glycolide) (PLGA) and acrylic acid, that combines biodegradability and molec- ular recognition properties. A novel three-arm biodegradable cross-linker was synthesized by ring-opening polymerization of glycolide and lactide initiated by glycerol. The resulting macromer was functionalized by introduction of end-functions through reaction with acryloyl chloride. Macromer and acrylic acid were used for the synthesis of narrowly-dispersed nanoparticles by radical polymerization in diluted conditions in the presence of biotin as template molecule. The binding capacity of the imprinted nanoparticles towards biotin and biotinylated bovine serum albumin was twentyfold that of non-imprinted nanoparti- cles. Degradation rates and functional performances were assessed in in vitro tests and cell cultures, demonstrating effective biotin-mediated cell internalization.
Assuntos
Plásticos Biodegradáveis/química , Portadores de Fármacos/química , Impressão Molecular/métodos , Nanopartículas/química , Acrilatos/química , Animais , Biotransformação , Bovinos , Células HeLa , Humanos , Ácido Láctico/química , Ácido Poliglicólico/química , Copolímero de Ácido Poliláctico e Ácido Poliglicólico , Ligação Proteica , Soroalbumina BovinaRESUMO
With the refinement of functional properties, the interest around biodegradable materials, in biorelated applications and, in particular, in their use as controlled drug-delivery systems, increased in the last decades. Biodegradable materials are an ideal platform to obtain nanoparticles for spatiotemporal controlled drug delivery for the in vivo administration, thanks to their biocompatibility, functionalizability, the control exerted on delivery rates and the complete degradation. Their application in systems for cancer treatment, brain and cardiovascular diseases is already a consolidated practice in research, while the bench-to-bedside translation is still late. This review aims at summarizing reported applications of biodegradable materials to obtain drug-delivery nanoparticles in the last few years, giving a complete overview of pros and cons related to degradable nanomedicaments.
Assuntos
Portadores de Fármacos , Sistemas de Liberação de Medicamentos , Biotransformação , Humanos , NanopartículasRESUMO
The biomaterial scaffold plays a key role in most tissue engineering strategies. Its surface properties, micropatterning, degradation, and mechanical features affect not only the generation of the tissue construct in vitro, but also its in vivo functionality. The area of myocardial tissue engineering still faces significant difficulties and challenges in the design of bioactive scaffolds, which allow composition variation to accommodate divergence in the evolving myocardial structure. Here we aimed at verifying if a microstructured bioartificial scaffold alone can provoke an effect on stem cell behavior. To this purpose, we fabricated microstructured bioartificial polymeric constructs made of PLGA/gelatin mimicking anisotropic structure and mechanical properties of the myocardium. We found that PLGA/gelatin scaffolds promoted adhesion, elongation, ordered disposition, and early myocardial commitment of human mesenchymal stem cells suggesting that these constructs are able to crosstalk with stem cells in a precise and controlled manner. At the same time, the biomaterial degradation kinetics renders the PLGA/gelatin constructs very attractive for myocardial regeneration approaches.
RESUMO
BACKGROUND: Experimental and computational characterizations in the preclinical development of biomedical devices are complementary and can significantly help in a thorough analysis of the performances before clinical evaluation. METHODOLOGY: Here mechanical and drug delivery properties of a polymer platform, ad hoc prepared to obtain coatings for drug-eluting stents, is reported; polymer formulation and starting drug loading were varied to study the behavior of the platform; a finite element model was constructed starting from experimental data. RESULTS: Different platform formulations affected mechanical and drug transport properties; these properties can be fine tuned by varying the starting platform formulation. Finite element analysis allowed visualizing drug distribution maps over time in biological tissues for different commercial stents and polymer platform formulations.