Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 139
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Chem Soc Rev ; 51(13): 5300-5329, 2022 Jul 04.
Artigo em Inglês | MEDLINE | ID: mdl-35708003

RESUMO

The purpose of this Tutorial Review is to outline the fundamental photochemistry of metal carbonyls, and to show how the advances in technology have increased our understanding of the detailed mechanisms, particularly how relatively simple experiments can provide deep understanding of complex problems. We recall some important early experiments that demonstrate the key principles underlying current research, concentrating on the binary carbonyls and selected substituted metal carbonyls. At each stage, we illustrate with examples from recent applications. This review first considers the detection of photochemical intermediates in three environments: glasses and matrices; gas phase; solution. It is followed by an examination of the theory underpinning these observations. In the final two sections, we briefly address applications to the characterization and behaviour of complexes with very labile ligands such as N2, H2 and alkanes, concentrating on key mechanistic points, and also describe some principles and examples of photocatalysis.


Assuntos
Elementos de Transição , Ligantes , Metais , Fotoquímica , Elementos de Transição/química
2.
J Am Chem Soc ; 143(24): 9082-9093, 2021 Jun 23.
Artigo em Inglês | MEDLINE | ID: mdl-34111929

RESUMO

The optical properties of two Re(CO)3(bpy)Cl complexes in which the bpy is substituted with two donor (triphenylamine, TPA, ReTPA2) as well as both donor (TPA) and acceptor (benzothiadiazole, BTD, ReTPA-BTD) groups are presented. For ReTPA2 the absorption spectra show intense intraligand charge-transfer (ILCT) bands at 460 nm with small solvatochromic behavior; for ReTPA-BTD the ILCT transitions are weaker. These transitions are assigned as TPA → bpy transitions as supported by resonance Raman data and TDDFT calculations. The excited-state spectroscopy shows the presence of two emissive states for both complexes. The intensity of these emission signals is modulated by solvent. Time-resolved infrared spectroscopy definitively assigns the excited states present in CH2Cl2 to be MLCT in nature, and in MeCN the excited states are ILCT in nature. DFT calculations indicated this switching with solvent is governed by access to states controlled by spin-orbit coupling, which is sufficiently different in the two solvents, allowing to select out each of the charge-transfer states.

3.
J Am Chem Soc ; 142(35): 14947-14956, 2020 09 02.
Artigo em Inglês | MEDLINE | ID: mdl-32786778

RESUMO

Time Dependent Density Functional Theory has been used to assist the design and synthesis of a series thioxanthone triplet sensitizers. Calculated energies of the triplet excited state (ET) informed both the type and position of auxochromes placed on the thioxanthone core, enabling fine-tuning of the UV-vis absorptions and associated triplet energies. The calculated results were highly consistent with experimental observation in both the order of the λmax and ET values. The synthesized compounds were then evaluated for their efficacies as triplet sensitizers in a variety of UV and visible light preparative photochemical reactions. The results of this study exceeded expectations; in particular [2 + 2] cycloaddition chemistry that had previously been sensitized in the UV was found to undergo cycloaddition at 455 nm (blue) with a 2- to 9-fold increase in productivity (g/h) relative to input power. This study demonstrates the ability of powerful modern computational methods to aid in the design of successful and productive triplet sensitized photochemical reactions.

4.
Inorg Chem ; 59(21): 15646-15658, 2020 Nov 02.
Artigo em Inglês | MEDLINE | ID: mdl-33044820

RESUMO

Designing porous materials which can selectively adsorb CO2 or CH4 is an important environmental and industrial goal which requires an understanding of the host-guest interactions involved at the atomic scale. Metal-organic polyhedra (MOPs) showing permanent porosity upon desolvation are rarely observed. We report a family of MOPs (Cu-1a, Cu-1b, Cu-2), which derive their permanent porosity from cavities between packed cages rather than from within the polyhedra. Thus, for Cu-1a, the void fraction outside the cages totals 56% with only 2% within. The relative stabilities of these MOP structures are rationalized by considering their weak nondirectional packing interactions using Hirshfeld surface analyses. The exceptional stability of Cu-1a enables a detailed structural investigation into the adsorption of CO2 and CH4 using in situ X-ray and neutron diffraction, coupled with DFT calculations. The primary binding sites for adsorbed CO2 and CH4 in Cu-1a are found to be the open metal sites and pockets defined by the faces of phenyl rings. More importantly, the structural analysis of a hydrated sample of Cu-1a reveals a strong hydrogen bond between the adsorbed CO2 molecule and the Cu(II)-bound water molecule, shedding light on previous empirical and theoretical observations that partial hydration of metal-organic framework (MOF) materials containing open metal sites increases their uptake of CO2. The results of the crystallographic study on MOP-gas binding have been rationalized using DFT calculations, yielding individual binding energies for the various pore environments of Cu-1a.

5.
Phys Chem Chem Phys ; 22(8): 4429-4438, 2020 Feb 26.
Artigo em Inglês | MEDLINE | ID: mdl-32051990

RESUMO

A strategy to create organic molecules with high degrees of radical spin multiplicity is reported in which molecular design is correlated with the behaviour of radical anions in a series of BODIPY dyads. Upon reduction of each BODIPY moiety radical anions are formed which are shown to have different spin multiplicities by electron paramagnetic resonance (EPR) spectroscopy and distinct profiles in their cyclic voltammograms and UV-visible spectra. The relationship between structure and multiplicity is demonstrated showing that the balance between singlet, biradical or triplet states in the dyads depends on relative orientation and connectivity of the BODIPY groups. The strategy is applied to the synthesis of a BODIPY triad which adopts an unusual quartet state upon reduction to its radical trianion.

6.
J Am Chem Soc ; 141(29): 11471-11480, 2019 Jul 24.
Artigo em Inglês | MEDLINE | ID: mdl-31306004

RESUMO

Complexes with weakly coordinating ligands are often formed in chemical reactions and can play key roles in determining the reactivity, particularly in catalytic reactions. Using time-resolved X-ray absorption fine structure (XAFS) spectroscopy in combination with time-resolved IR (TRIR) spectroscopy and tungsten hexacarbonyl, W(CO)6, we are able to structurally characterize the formation of an organometallic alkane complex, determine the W-C distances, and monitor the reactivity with silane to form an organometallic silane complex. Experiments in perfluorosolvents doped with xenon afford initially the corresponding solvated complex, which is sufficiently reactive in the presence of Xe that we can then observe the coordination of Xe to the metal center, providing a unique insight into the metal-xenon bonding. These results offer a step toward elucidating the structure, bonding, and chemical reactivity of transient species by X-ray absorption spectroscopy, which has sensitivity to small structural changes. The XAFS results indicate that the bond lengths of metal-alkane (W-H-C) bond in W(CO)5(heptane) as 3.07 (±0.06) Å, which is longer than the calculated W-C (2.86 Å) for binding of the primary C-H, but shorter than the calculated W-C (3.12 Å) for the secondary C-H. A statistical average of the calculated W-C alkane bond lengths is 3.02 Å, and comparison of this value indicates that the value derived from the XAFS measurements is averaged over coordination of all C-H bonds consistent with alkane chain walking. Photolysis of W(CO)6 in the presence of HSiBu3 allows the conversion of W(CO)5(heptane) to W(CO)5(HSiBu3) with an estimated W-Si distance of 3.20 (±0.03) Å. Time-resolved TRIR and XAFS experiments following photolysis of W(CO)6 in perfluoromethylcyclohexane (PFMCH) allows the characterization of W(CO)5(PFMCH) with a W-F distance of 2.65 (±0.06) Å, and doping PFMCH with Xe allows the characterization of W(CO)5Xe with a W-Xe bond length of 3.10 (±0.02) Å.

7.
Nat Mater ; 17(8): 691-696, 2018 08.
Artigo em Inglês | MEDLINE | ID: mdl-29891889

RESUMO

Nitrogen dioxide (NO2) is a major air pollutant causing significant environmental1,2 and health problems3,4. We report reversible adsorption of NO2 in a robust metal-organic framework. Under ambient conditions, MFM-300(Al) exhibits a reversible NO2 isotherm uptake of 14.1 mmol g-1, and, more importantly, exceptional selective removal of low-concentration NO2 (5,000 to <1 ppm) from gas mixtures. Complementary experiments reveal five types of supramolecular interaction that cooperatively bind both NO2 and N2O4 molecules within MFM-300(Al). We find that the in situ equilibrium 2NO2 ↔ N2O4 within the pores is pressure-independent, whereas ex situ this equilibrium is an exemplary pressure-dependent first-order process. The coexistence of helical monomer-dimer chains of NO2 in MFM-300(Al) could provide a foundation for the fundamental understanding of the chemical properties of guest molecules within porous hosts. This work may pave the way for the development of future capture and conversion technologies.

9.
Faraday Discuss ; 220(0): 86-104, 2019 Dec 02.
Artigo em Inglês | MEDLINE | ID: mdl-31608916

RESUMO

A combined experimental and theoretical study is presented of several ligand addition reactions of the triplet fragment 3CpMn(CO)2 formed upon photolysis of CpMn(CO)3. Experimental data are provided for reactions in n-heptane and perfluoromethylcyclohexane (PFMCH), as well as in PFMCH doped with C2H6, Xe and CO2. In PFMCH we find that the conversion of 3CpMn(CO)2 to 1CpMn(CO)2(PFMCH) is much slower (τ = 18 (±3) ns) than the corresponding reactions in conventional alkanes (τ = 111 (±10) ps). We measure the effect of the coordination ability by doping PFMCH with alkane, Xe and CO2; these doped ligands form the corresponding singlet adducts with significantly variable formation rates. The reactivity as measured by the addition timescale follows the order 1CpMn(CO)2(C5H10) (τ = 270 (±10) ps) > 1CpMn(CO)2Xe (τ = 3.9 (±0.4) ns) ∼ 1CpMn(CO)2(CO2) (τ = 4.7 (±0.5) ns) > 1CpMn(CO)2(C7F14) (τ = 18 (±3) ns). Electronic structure theory calculations of the singlet and triplet potential energy surfaces and of their intersections, together with non-adiabatic statistical rate theory, reproduce the observed rates semi-quantitatively. It is shown that triplet adducts of the ligand and 3CpMn(CO)2 play a role in the kinetics, and account for the variable timescales observed experimentally.

10.
Inorg Chem ; 58(15): 9785-9795, 2019 Aug 05.
Artigo em Inglês | MEDLINE | ID: mdl-31314505

RESUMO

A transition-metal-based donor-(linker)-acceptor system can produce long-lived charge transfer excited states using visible excitation wavelengths. The ground- and excited-state photophysical properties of a series of [ReCl(CO)3(dppz-(linker)-TPA)] complexes, with varying donor and acceptor energies, have been systematically studied using spectroscopic techniques (both vibrational and electronic) supported by computational chemistry. The long-lived excited state is 3ILCT in nature for all complexes studied, characterized through transient absorption and emission, transient resonance Raman (TR2), and time-resolved infrared (TRIR) spectroscopy and TDDFT calculations. Modulation of the donor and acceptor energies results in changes of the 3ILCT lifetime by 1 order of magnitude, ranging from 6.1(±1) µs when a diphenylamine donor is used to 0.6(±0.2) µs when a triazole linker and triphenylamine donor is used. The excited-state lifetime may be rationalized by consideration of the driving force within the framework of Marcus theory and appears insensitive to the nature of the linker.

11.
J Chem Phys ; 151(3): 034104, 2019 Jul 21.
Artigo em Inglês | MEDLINE | ID: mdl-31325914

RESUMO

The calculation of electron ionization energies is a key component for the simulation of photoelectron spectroscopy. CIS(D) is a perturbative doubles correction for the single excitation configuration interaction (CIS) method which provides a new approach for computing excitation energies. It is shown that by introducing a virtual orbital subspace that consists of a single "ghost" orbital, valence electron ionization energies can be computed using a scaled CIS(D) approach with an accuracy comparable with considerably more computationally intensive methods, such as ionization-potential equation of motion coupled cluster theory, and simulated spectra show a significant improvement relative to spectra based upon Koopmans' theorem. When the model is applied to the ionization energies for core orbitals, there is an increase in the error, particularly for the heavier nuclei considered (silicon to chlorine), although the relative energy of the ionization energies are predicted accurately. In addition to its inherent computational efficiency relative to other wavefunction based approaches, a significant advantage of this approach is that the ionization energies for all electrons can be obtained in a single calculation, in contrast to Δself-consistent field based methods.

12.
J Am Chem Soc ; 140(5): 1842-1854, 2018 02 07.
Artigo em Inglês | MEDLINE | ID: mdl-29290110

RESUMO

Carbon-hydrogen bond activation of alkanes by Tp'Rh(CNR) (Tp' = Tp = trispyrazolylborate or Tp* = tris(3,5-dimethylpyrazolyl)borate) were followed by time-resolved infrared spectroscopy (TRIR) in the υ(CNR) and υ(B-H) spectral regions on Tp*Rh(CNCH2CMe3), and their reaction mechanisms were modeled by density functional theory (DFT) on TpRh(CNMe). The major intermediate species were: κ3-η1-alkane complex (1); κ2-η2-alkane complex (2); and κ3-alkyl hydride (3). Calculations predict that the barrier between 1 and 2 arises from a triplet-singlet crossing and intermediate 2 proceeds over the rate-determining C-H activation barrier to give the final product 3. The activation lifetimes measured for the Tp*Rh(CNR) and Tp*Rh(CO) fragments with n-heptane and four cycloalkanes (C5H10, C6H12, C7H14, and C8H16) increase with alkanes size and show a dramatic increase between C6H12 and C7H14. A similar step-like behavior was observed previously with CpRh(CO) and Cp*Rh(CO) fragments and is attributed to the wider difference in C-H bonds that appear at C7H14. However, Tp'Rh(CNR) and Tp'Rh(CO) fragments have much longer absolute lifetimes compared to those of CpRh(CO) and Cp*Rh(CO) fragments, because the reduced electron density in dechelated κ2-η2-alkane Tp' complexes stabilizes the d8 Rh(I) in a square-planar geometry and weakens the metal's ability for oxidative addition of the C-H bond. Further, the Tp'Rh(CNR) fragment has significantly slower rates of C-H activation in comparison to the Tp'Rh(CO) fragment for the larger cycloalkanes, because the steric bulk of the neopentyl isocyanide ligand hinders the rechelation in κ2-Tp'Rh(CNR)(cycloalkane) species and results in the C-H activation without the assistance of the rechelation.

13.
J Am Chem Soc ; 140(13): 4534-4542, 2018 04 04.
Artigo em Inglês | MEDLINE | ID: mdl-29537264

RESUMO

The ground and excited state photophysical properties of a series of fac-[Re(L)(CO)3(α-diimine)] n+ complexes, where L = Br-, Cl-, 4-dimethylaminopyridine (dmap) and pyridine (py) have been extensively studied utilizing numerous electronic and vibrational spectroscopic techniques in conjunction with a suite of quantum chemical methods. The α-diimine ligand consists of 1,10-phenanthroline with the highly electron donating triphenylamine (TPA) appended in the 5 position. This gives rise to intraligand charge transfer (ILCT) states lying lower in energy than the conventional metal-to-ligand charge transfer (MLCT) state, the energies of which are red and blue-shifted, respectively, as the ancillary ligand, L becomes more electron withdrawing. The emitting state is 3ILCT in nature for all complexes studied, characterized through transient absorption and emission, transient resonance Raman (TR2), time-resolved infrared (TRIR) spectroscopy and TDDFT calculations. Systematic modulation of the ancillary ligand causes unanticipated variation in the 3ILCT lifetime by 2 orders of magnitude, ranging from 6.0 µs for L = Br- to 27 ns for L = py, without altering the nature of the excited state formed or the relative order of the other CT states present. Temperature dependent lifetime measurements and quantum chemical calculations provide no clear indication of close lying deactivating states, MO switching, contributions from a halide-to-ligand charge transfer (XLCT) state or dramatic changes in spin-orbit coupling. It appears that the influence of the ancillary ligand on the excited state lifetime could be explained in terms of energy gap law, in which there is a correlation between ln( knr) and Eem with a slope of -21.4 eV-1 for the 3ILCT emission.

14.
Phys Chem Chem Phys ; 20(2): 752-764, 2018 Jan 03.
Artigo em Inglês | MEDLINE | ID: mdl-29139504

RESUMO

Varying the degree of thionation of a series of naphthalene diimide (NDI) and naphthalic imide (NI) phenothiazine dyad systems affords a systematic approach for tuning the system's donor-acceptor energy gap. Each dyad was compared to model NDI/NI systems and fully characterised through single crystal X-ray diffraction, NMR, cyclic voltammetry, electron paramagnetic resonance (EPR), transient absorption spectroscopy (TA), time-resolved infra-red spectroscopy (TRIR) and DFT. The measurements reveal that thionation increases both electron affinity of the NDI/NI acceptor dyad component and accessibility of the singly or doubly reduced states. Furthermore, FTIR and TA measurements show that excited state behaviour is greatly affected by thionation of the NDI and induces a decrease in the lifetime of the excited states formed upon the creation of charge-separated states.

15.
Angew Chem Int Ed Engl ; 57(39): 12590-12591, 2018 09 24.
Artigo em Inglês | MEDLINE | ID: mdl-29797468

RESUMO

"… How do we have a major impact on delivering sustainable chemistry? Carbon-neutral laboratories can drive down the environmental costs of chemistry. We propose that sustainable chemistry requires some overarching goal that can be embraced by everyone in the chemical supply chain as well as by the public …" Read more in the Guest Editorial by Martyn Poliakoff, Peter Licence, and Michael W. George.

16.
J Am Chem Soc ; 139(21): 7335-7347, 2017 05 31.
Artigo em Inglês | MEDLINE | ID: mdl-28485597

RESUMO

Ferrous iron(II) hexacyanide in aqueous solutions is known to undergo photoionization and photoaquation reactions depending on the excitation wavelength. To investigate this wavelength dependence, we implemented ultrafast two-dimensional UV transient absorption spectroscopy, covering a range from 280 to 370 nm in both excitation and probing, along with UV pump/visible probe or time-resolved infrared (TRIR) transient absorption spectroscopy and density functional theory (DFT) calculations. As far as photoaquation is concerned, we find that excitation of the molecule leads to ultrafast intramolecular relaxation to the lowest triplet state of the [Fe(CN)6]4- complex, followed by its dissociation into CN- and [Fe(CN)5]3- fragments and partial geminate recombination, all within <0.5 ps. The subsequent time evolution is associated with the [Fe(CN)5]3- fragment going from a triplet square pyramidal geometry, to the lowest triplet trigonal bipyramidal state in 3-4 ps. This is the precursor to aquation, which occurs in ∼20 ps in H2O and D2O solutions, forming the [Fe(CN)5(H2O/D2O)]3- species, although some aquation also occurs during the 3-4 ps time scale. The aquated complex is observed to be stable up to the microsecond time scale. For excitation below 310 nm, the dominant channel is photooxidation with a minor aquation channel. The photoaquation reaction shows no excitation wavelength dependence up to 310 nm, that is, it reflects a Kasha Rule behavior. In contrast, the photooxidation yield increases with decreasing excitation wavelength. The various intermediates that appear in the TRIR experiments are identified with the help of DFT calculations. These results provide a clear example of the energy dependence of various reactive pathways and of the role of spin-states in the reactivity of metal complexes.

17.
Inorg Chem ; 56(21): 12967-12977, 2017 Nov 06.
Artigo em Inglês | MEDLINE | ID: mdl-28984448

RESUMO

The ground- and excited-state properties of a series of [ReCl(CO)3(dppz)] complexes with substituted donor groups were investigated. Alteration of donor-acceptor communication through modulation of torsional angle and the number and nature of the donor substituents allowed the effects on the photophysical properties to be characterized though both computational and spectroscopic techniques, including time-dependent density functional theory and resonance Raman and time-resolved infrared spectroscopy. The ground-state optical properties show significant variation as a result of donor group modulation, with an increased angle between the donor and acceptor blue-shifting and depleting the intensity of the lowest-energy transition, which is consistently intraligand charge transfer (ILCT) in nature. However, across all complexes studied there was minimal perturbation to the excited-state properties and dynamics. Three excited states on the picosecond, nanosecond, and microsecond time scales were observed in all cases, corresponding to 1ILCT, 3ππ*, and 3ILCT, respectively.

18.
Phys Chem Chem Phys ; 19(11): 7877-7885, 2017 Mar 15.
Artigo em Inglês | MEDLINE | ID: mdl-28262897

RESUMO

Understanding what influences the formation and lifetime of charge-separated states is key to developing photoelectrochemical devices. This paper describes the use of time-resolved infrared absorption spectroscopy (TRIR) to determine the structure and lifetime of the intermediates formed on photoexcitation of two organic donor-π-acceptor dyes adsorbed to the surface of NiO. The donor and π-linker of both dyes is triphenylamine and thiophene but the acceptors differ, maleonitrile (1) and bodipy (2). Despite their structural similarities, dye 1 outperforms 2 significantly in devices. Strong transient bands in the fingerprint region (1 and 2) and nitrile region (2300-2000 cm-1) for 1 enabled us to monitor the structure of the excited states in solution or adsorbed on NiO (in the absence and presence of electrolyte) and the corresponding kinetics, which are on a ps-ns timescale. The results are consistent with rapid (<1 ps) charge-transfer from NiO to the excited dye (1) to give exclusively the charge-separated state on the timescale of our measurements. Conversely, the TRIR experiments revealed that multiple species are present shortly after excitation of the bodipy chromophore in 2, which is electronically decoupled from the thiophene linker. In solution, excitation first populates the bodipy singlet excited state, followed by charge transfer from the triphenylamine to the bodipy. The presence and short lifetime (τ ≈ 30 ps) of the charge-transfer excited state when 2 is adsorbed on NiO (2|NiO) suggests that charge separation is slower and/or less efficient in 2|NiO than in 1|NiO. This is consistent with the difference in performance between the two dyes in dye-sensitized solar cells and photoelectrochemical water splitting devices. Compared to n-type materials such as TiO2, less is understood regarding electron transfer between dyes and p-type metal oxides such as NiO, but it is evident that fast charge-recombination presents a limit to the performance of photocathodes. This is also a major challenge to photocatalytic systems based on a "Z-scheme", where the catalysis takes place on a µs-s timescale.

19.
Beilstein J Org Chem ; 13: 329-337, 2017.
Artigo em Inglês | MEDLINE | ID: mdl-28326142

RESUMO

The use of γ-Al2O3 as a heterogeneous catalyst in scCO2 has been successfully applied to the amination of alcohols for the synthesis of N-alkylated heterocycles. The optimal reaction conditions (temperature and substrate flow rate) were determined using an automated self-optimising reactor, resulting in moderate to high yields of the target products. Carrying out the reaction in scCO2 was shown to be beneficial, as higher yields were obtained in the presence of CO2 than in its absence. A surprising discovery is that, in addition to cyclic amines, cyclic ureas and urethanes could be synthesised by incorporation of CO2 from the supercritical solvent into the product.

20.
Chemistry ; 22(1): 302-9, 2016 Jan 04.
Artigo em Inglês | MEDLINE | ID: mdl-26608231

RESUMO

For the first time, a versatile electrolyte bath is described that can be used to electrodeposit a wide range of p-block elements from supercritical difluoromethane (scCH2 F2 ). The bath comprises the tetrabutylammonium chlorometallate complex of the element in an electrolyte of 50×10(-3)  mol dm(-3) tetrabutylammonium chloride at 17.2 MPa and 358 K. Through the use of anionic ([GaCl4 ](-) , [InCl4 ](-) , [GeCl3 ](-) , [SnCl3 ](-) , [SbCl4 ](-) , and [BiCl4 ](-) ) and dianionic ([SeCl6 ](2-) and [TeCl6 ](2-) ) chlorometallate salts, the deposition of elemental Ga, In, Ge, Sn, Sb, Bi, Se, and Te is demonstrated. In all cases, with the exception of gallium, which is a liquid under the deposition conditions, the resulting deposits are characterised by SEM, energy-dispersive X-ray analysis, XRD and Raman spectroscopy. An advantage of this electrolyte system is that the reagents are all crystalline solids, reasonably easy to handle and not highly water or oxygen sensitive. The results presented herein significantly broaden the range of materials accessible by electrodeposition from supercritical fluid and open up the future possibility of utilising the full scope of these unique fluids to electrodeposit functional binary or ternary alloys and compounds of these elements.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA