Electrochemical Exfoliation of Graphene Oxide: Unveiling Structural Properties and Electrochemical Performance.

An electrochemical exfoliation method for the production of graphene oxide and its characterization by electrochemical techniques are presented here. Graphite rods are used as working electrode in a three-electrode electrochemical cell, and electro-exfoliation is achieved by applying anodic polarization in a sulfuric acid solution. The electrochemical process involved two steps characterized by an intercalation at lower potential and an exfoliation at higher potential. The electrochemical behavior of the produced GO is studied through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). X ray Photoelectronic Spectroscopy (XPS), Raman spectroscopy, Transmission Electron Microscopy (TEM), and Atomic Force Microscopy (AFM) are employed to characterize the structural and chemical properties of the exfoliated GO. The results demonstrate that the electrochemical exfoliation method yields GO materials with varying degrees of oxidation, defect density, and crystallite size, depending on the applied potential and acid concentration. The graphene oxide samples exhibited distinct electrochemical properties, including charge transfer resistance, interfacial capacitance, and relaxation times for the charge transfer, as revealed by CV and EIS measurements with a specifically selected redox probe. The comprehensive characterization performed provides valuable insights into the structure-property relationships of the GO materials synthesized through electrochemical exfoliation of graphite.

Gramicidin ion channels in a lipid bilayer supported on polyelectrolyte multilayer films: an electrochemical impedance study.

Supported membranes on polymer cushions are of fundamental interest as models for cell membranes. The use of polyelectrolyte multilayers (PEMs) assembled by the layer by layer (LbL) technique as supports for a bilayer allows for easy integration of the lipid bilayer on surfaces and devices and for nanoscale tunable spacing of the lipid bilayer. Controlling ionic permeability in lipid bilayers supported on PEMs triggers potential applications in sensing and as models for transport phenomena in cell membranes. Lipid bilayers displaying gramicidin channels are fabricated on top of polyallylamine hydrochloride (PAH) and polystyrene sulfonate (PSS) multilayer films, by the assembly of vesicles of phosphatidylcholine and phosphatidylserine, 50 : 50 M/M, carrying gramicidin (GA). Quartz crystal microbalance with dissipation shows that the vesicles with GA fuse into a bilayer. Atomic force microscopy reveals that the presence of GA alters the bilayer topography resulting in depressions in the bilayer of around 70 nm in diameter. Electrochemical impedance spectroscopy (EIS) studies show that supported bilayers carrying GA have smaller resistances than the bilayers without GA. Lipid layers carrying GA display a higher conductance for K+ than for Na+ and are blocked in the presence of Ca2+.

High Resistivity Lipid Bilayers Assembled on Polyelectrolyte Multilayer Cushions: An Impedance Study.

Supported membranes on top of polymer cushions are interesting models of biomembranes as cell membranes are supported on a polymer network of proteins and sugars. In this work lipid vesicles formed by a mixture of 30% 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 70% 1,2-dioleoyl-sn-glycero-3-phospho-l-serine (DOPS) are assembled on top of a polyelectrolyte multilayer (PEM) cushion of poly(allylamine hydrochloride) (PAH) and poly(styrene sodium sulfonate) (PSS). The assembly results in the formation of a bilayer on top of the PEM as proven by means of the quartz crystal microbalance with dissipation technique (QCM-D) and by cryo-transmission electron microscopy (cryo-TEM). The electrical properties of the bilayer are studied by electrochemical impedance spectroscopy (EIS). The bilayer supported on the PEMs shows a high resistance, on the order of 10(7) Ω cm(2), which is indicative of a continuous, dense bilayer. Such resistance is comparable with the resistance of black lipid membranes. This is the first time that such values are obtained for lipid bilayers supported on PEMs. The assembly of polyelectrolytes on top of a lipid bilayer decreases the resistance of the bilayer up to 2 orders of magnitude. The assembly of the polyelectrolytes on the lipids induces defects or pores in the bilayer which in turn prompts a decrease in the measured resistance.

Electrochemical determination of the glass transition temperature of thin polyelectrolyte brushes at solid-liquid interfaces by impedance spectroscopy.

Devising strategies to assess the glass transition temperature (Tg) of polyelectrolyte assemblies at solid-electrolyte interfaces is very important to understand and rationalize the temperature-dependent behavior of polyelectrolyte films in a wide range of settings. Despite the evolving perception of the importance of measuring Tg under aqueous conditions in thin film configurations, its straightforward measurement poses a challenging situation that still remains elusive in polymer and materials science. Here, we describe a new method based on electrochemical impedance spectroscopy (EIS) to estimate the glass transition temperature of planar polyelectrolyte brushes at solid-liquid interfaces. To measure Tg, the charge transfer resistance (Rct) of a redox probe diffusing through the polyelectrolyte brush was measured, and the temperature corresponding to the discontinuous change in Rct was identified as Tg. Furthermore, we demonstrate that impedance measurements not only facilitate the estimation of Tg but also enable a reliable evaluation of the transport properties of the polymeric interface, i.e., determination of diffusion coefficients, close to the thermal transition. We consider that this approach bridges the gap between electrochemistry and the traditional tools used in polymer science and offers new opportunities to characterize the thermal behavior of complex polymeric interfaces and macromolecular assemblies.

Toxic Effects of Gemcitabine and Paclitaxel Combination: Chemotherapy Drugs Exposure in Zebrafish.

Pharmaceuticals are widely recognized as potentially hazardous to aquatic ecosystems. In the last two decades, the constant intake of biologically active chemicals used in human healthcare has been related to the growing release of these agents into natural environments. As reported by several studies, various pharmaceuticals have been detected, mainly in surface water (seas, lakes, and rivers), but also in groundwater and drinking water. Moreover, these contaminants and their metabolites can show biological activity even at very low concentrations. This study aimed to evaluate the developmental toxicity of exposure to the chemotherapy drugs gemcitabine and paclitaxel in aquatic environments. Zebrafish (Danio rerio) embryos were exposed to doses of gemcitabine 15 µM in combination with paclitaxel 1 µM from 0 to 96 h post-fertilization (hpf) using a fish embryo toxicity test (FET). This study highlights that both gemcitabine and paclitaxel exposure at single non-toxic concentrations affected survival and hatching rate, morphology score, and body length after exposure in combination. Additionally, exposure significantly disturbed the antioxidant defense system and increased ROS in zebrafish larvae. Gemcitabine and paclitaxel exposure caused changes in the expression of inflammation-related, endoplasmic reticulum stress-related (ERS), and autophagy-related genes. Taken together, our findings underline that gemcitabine and paclitaxel increase developmental toxicity in zebrafish embryos in a time-dependent manner.

Morphological and Molecular Identification of Mullet Helminth Parasite Fauna from Ganzirri Lagoon (Sicily, Southern Italy).

Mullets (Osteichthyes: Mugilidae) are a euryhaline species widely distributed all over the world, thus representing an excellent study model for host-parasite interactions. From March to June 2022, 150 mullets, belonging to Chelon labrosus (n = 99), Chelon auratus (n = 37), and Oedalechilus labeo (n = 14) species, were caught to identify the helminth parasite fauna of the different mullet species present in the Ganzirri Lagoon (Messina, Sicily, Italy). A parasitological evaluation of the gastrointestinal tract (GIT) was carried out with a total worm count technique (TWC) to detect helminth presence. All collected parasites were stored in 70% ethanol until morphological evaluation, and frozen at -80 °C for subsequent molecular analysis, using 28S, ITS-2, 18S primers. The morphological evaluation allowed for the identification Acanthocephalan parasites (Neoechinorhynchus agilis) from two C. labrosus specimens. Sixty-six samples were positive for adult digenean trematodes (C. labrosus, 49.5 %; C. auratus, 27%, and O. labeo, 50%), molecularly identified as Haploporus benedeni. This study represents the first survey of helminthic parasite fauna of mullets from the south of Italy. The presence of Hydrobia sp. in the stomach contents of mullets allowed us to infer the H. benedeni life cycle in the Ganzirri lagoon.

From by-product to functional food: the survival of L. casei shirota, L. casei immunitas and L. acidophilus johnsonii, during spray drying in orange juice using a maltodextrin/pectin mixture as carrier.

The study reports the production of an innovative functional orange powder supplemented with probiotics and prebiotics, by implementing new ecofriendly and sustainable technologies, such as spray drying. The survival of Lactobacillus casei shirota, Lactobacillus casei immunitas and Lactobacillus acidophilus johnsonii, during spray drying in orange juice was proven and the stability of the powder obtained at room temperature and at 4 °C was investigated. Furthermore, the study highlighted the possibility to enhance the pectin obtained from the food agroindustry as a carrier for the spray-drying process. Combining maltodextrins and pectins at a 10:1 weight ratio. The study showed the efficiency of the maltodextrin/pectin mixture as carriers for the spray-drying process and the viability of the tested microorganisms during both the storage at room temperature and at 4 °C, showing that the latter represents the best storing condition for a longer viability of the microorganisms.

Chemical Characterization, Antibacterial Activity, and Embryo Acute Toxicity of Rhus coriaria L. Genotype from Sicily (Italy).

This study reports a full characterization of the Sicilian sumac, Rhus coriaria L. This fruit represents a potential source of fiber (33.21 ± 1.02%) and unsaturated fatty acids, being the contents of linoleic and α-linolenic acids, 30.82 ± 1.21% and 1.85 ± 0.07%, respectively. In addition, the content of phenolic and total anthocyanin was 71.69 ± 1.23 mg/g as gallic acid equivalents, and 6.71 ± 0.12 mg/g as cyanidin-3-O-glucoside equivalents, respectively. The high content in mineral elements, consisting mainly of potassium, calcium, magnesium, and phosphorus, followed by aluminum, iron, sodium, boron, and zinc, was detected by inductively coupled plasma mass spectrometry (ICP-MS). Moreover, its antimicrobial activity was evaluated against multidrug resistant (MDR) microorganisms, represented by Escherichia coli and Klebsiella pneumoniae strains isolated from poultry. The activity of seven different sumac fruit extracts obtained using the following solvents-ethanol (SE), methanol (SM), acetone (SA), ethanol and water (SEW), methanol and water (SMW), acetone and water (SAW), water (SW)-was evaluated. The polyphenol profile of SM extract, which showed better activity, was analyzed by ultra-high performance liquid chromatography coupled with mass spectrometry (UHPLC-MS). The major component identified was gallic acid, followed by quercetin, methyl digallate, pentagalloyl-hexoside, and kaempferol 3-O-glucoside. The non-toxicity of Sicilian R. coriaria was confirmed by testing the effect of the same extract on zebrafish embryos.

Effects of valinomycin doping on the electrical and structural properties of planar lipid bilayers supported on polyelectrolyte multilayers.

Supported Lipid Bilayers (SLBs) on Polyelectrolyte Multilayers (PEMs) have large potential as models for developing sensor devices. SLBs can be designed with receptors and channels, which benefit from the biological environment of the lipid layers, to create a sensing interface for ions and biomarkers. PEMs assembled by the Layer-by-Layer (LBL) technique and used as supports for a lipid bilayer enable an easy integration of the bilayer on almost any surface and device. For electrochemical sensors, LBL assembly enables nanoscale tunable separation of the lipid bilayer from the electrode surface, avoiding undesired effects of the electrode surface on the lipid bilayers. We study the fabrication of valinomycin-doped SLBs on PEMs as a model system for biophysical studies and for selective ion sensing. SLBs are fabricated from dioleoylphosphatidylcholine (DOPC) and dioleoylphosphatidylserine (DOPS) 50:50 vesicles doped with valinomycin, as a K+-selective carrier. SLBs were deposited on electrodes coated with poly(allyl amine hydrochloride) (PAH) and poly(styrene sodium sulfonate) (PSS) multilayers. Lipid bilayer formation was monitored by using Quartz Crystal Microbalance with Dissipation (QCMD) technique and Atomic Force Microscopy (AFM). Electrochemical impedance spectroscopy (EIS) and potentiometric measurements were performed to assess K+ selectivity over other ions and the potential of valinomycin-doped SLBs for K+-sensing.

Accumulation of PCBs, PAHs, plasticizers and inorganic elements in Hexanchus griseus from the strait of Messina (Central Mediterranean sea).

This study investigates the inorganic elements and the persistent organic pollutants (POPs) accumulated in liver of a sexually mature Hexanchus griseus living in the Mediterranean Sea. The casual finding of a specimen in the Strait of Messina (April 2018) allowed us to carefully analyse its liver which can be considered a very important biological indicator. The determination of inorganic elements was carried out by ICP-MS technique. Quantitative determination of polycyclic aromatic hydrocarbons (PAH) and poly-chloro-biphenyl compounds (PCB), distinguished in dioxine-like (DL) and not-dioxine-like (NDL) derivates, has been carried out by HRGC/MS and HRGC-MS/MS respectively. Worrying levels of PCB-DL (TEQ = Σ(PCB-DL)*TEF = 5.96 ng g-1), PCB-NDL (Σ(PCB-NDL) = 1390.4 ng g-1) together with the presence of pesticides and plasticizers were found in the shark liver oil. The levels of heavy metals were below the legal limits.

Valorization of raw materials from agricultural industry for astaxanthin and ß-carotene production by Xanthophyllomyces dendrorhous.

Waste deriving from food and agro-industries is a growing problem in our modern society. In order to reduce food waste and its associated impacts over the environment and public health, innovative strategies for the conversion of food wastes in added value products are studied. Whey is one of the prominent waste deriving from Sicilian diary industry. The growth and the carotenoid biosynthesis of the yeast Xanthophyllomyces dendrorhous by its cultivation in pre-treated whey were studied. The study showed the possibility of increasing the astaxanthin productivity from X. dendrorhous in a batch fermentative process under continuous illumination. Our work is focused on the importance of carotenogenesis by X. dendrorhous on whey for the economic and ecological aspect. The results obtained in the study provide useful information about the possible use of this waste material for carotenogenesis from X. dendrorhous.

Electrochemical preparation and characterization of polypyrrole/stainless steel electrodes decorated with gold nanoparticles.

The electrosynthesis and characterization of polypyrrole(PPy)/stainless steel electrodes decorated with gold nanoparticles and the performance of the composite electrode for sensing applications is described. PPy films were grown in potassium perchlorate and sodium salicylate solutions under comparable electropolymerization conditions. Polymer films prepared in the presence of perchlorate ions exhibited worm-like structures, whereas columnar structures were obtained in salicylate-containing solutions. Voltammetric response of PPy films prepared in salicylate solutions was more reversible. PPy films were decorated with gold nanoparticles obtained by a double step potentiostatic electrodeposition routine that allowed fine control of deposit characteristics. Analysis of deposits was performed by means of SEM and confocal Raman spectroscopy. The electrocatalytic activity of the Au/PPy electrodes was assessed for the electro-oxidation of hydrazine and hydroxylamine. Results showed a successful optimization of the route of synthesis that rendered nanocomposite electrode materials with promising applications in electrochemical sensing.