Metal Ion Augmented Mussel Inspired Polydopamine Immobilized 3D Printed Osteoconductive Scaffolds for Accelerated Bone Tissue Regeneration.

Critical bone defects with a sluggish rate of auto-osteoconduction and imperfect reconstruction are motivators for the development of an alternate innovative approach for the regeneration of bone. Tissue engineering for bone regeneration signifies an advanced way to overcome this problem by creating an additional bone tissue substitute. Among different fabrication techniques, the 3D printing technique is obviously the most efficient and advanced way to fabricate an osteoconductive scaffold with a controlled porous structure. In the current article, the polycarbonate and polyester diol based polyurethane-urea (P12) was synthesized and 3D porous nanohybrid scaffolds (P12/TP-nHA) were fabricated using the 3D printing technique by incorporating the osteoconductive nanomaterial titanium phosphate adorned nanohydroxyapatite (TP-nHA). To improve the bioactivity, the surface of the fabricated scaffolds was modified with the immobilized biomolecule polydopamine (PDA) at room temperature. XPS study as well as the measurement of surface wettability confirmed the higher amount of PDA immobilization on TP-nHA incorporated nanohybrid scaffolds through the dative bone formation between the vacant d orbital of the incorporated titanium ion and the lone pair electron of the catechol group of dopamine. The incorporated titanium phosphate (TP) increased the tensile strength (53.1%) and elongation at break (96.8%) of the nanohybrid composite as compared to pristine P12. Moreover, the TP incorporated nanohybrid scaffold with calcium and phosphate moieties and a higher amount of immobilized active biomolecule improved the in vitro bioactivity, including the cell viability, cell proliferation, and osteogenic gene expression using hMSCs, of the fabricated nanohybrid scaffolds. A rat tibia defect model depicted that the TP incorporated nanohybrid scaffold with immobilized PDA enhanced the in vivo bone regeneration ability compared to the control sample without revealing any organ toxicity signifying the superior osteogenic bioactivity. Thus, a TP augmented polydopamine immobilized polyurethane-urea based nanohybrid 3D printed scaffold with improved physicochemical properties and osteogenic bioactivity could be utilized as an excellent advanced material for bone regeneration substitute.

Promoted Osteoconduction of Polyurethane-Urea Based 3D Nanohybrid Scaffold through Nanohydroxyapatite Adorned Hierarchical Titanium Phosphate.

The lack of optimal physiological properties, bacterial colonization, and auto-osteoinduction, are the foremost issues of orthopedic implantations. In terms of bone healing, many researchers have reported the release of additional growth factors of the implanted biomaterials to accelerate the bone regeneration process. However, the additional growth factor may cause side effects such as contagion, nerve pain, and the formation of ectopic bone. Thus, the design of an osteoconductive scaffold having excellent biocompatibility, appropriate physicomechanical properties, and promoted auto osteoinductivity with antibacterial activity is greatly desired. In this study, 2D rodlike nanohydroxyapatite (nHA) adorned titanium phosphate (TP) with a flowerlike morphology was synthesized by a hydrothermal precipitation reaction. The nanohybrid material (nHA-TP) was incorporated into the synthesized polycaprolactone diol and spermine based thermoplastic polyurethane-urea (PUU) via in situ technique followed by salt leaching to fabricate the macroporous 3D polymer nanohybrid scaffold (PUU/nHA-TP). Structure explication of PUU was performed by NMR spectroscopy. The synthesized nanohybrid scaffold with 1% nHA-TP showed 67% increase of tensile strength and 18% improved modulus compared to the pristine PUU via formation of H-bonding or dative bonds between the metal and the amide linkage of the polyurethane or polyurea. In vitro study showing improved cell viability and proliferation of the seeded cell revealed the superior osteoconductivity of the nanohybrid scaffold. Most importantly, the in vivo experiments revealed a significant amount of bone regeneration in the nanohybrid scaffold implanted tibial site compared to the pristine scaffold without any toxic effect. Introduction of the minute amount of titanium phosphate within the adorned nHA promotes the osteoconductivity significantly by the capability of forming coordinate bonds of the titanium ion. Depending on the mechanical, physicochemical, in vitro characteristics, and in vivo osteoconductivity, the PUU/nHA-TP nanohybrid scaffold has great potential as an alternative biomaterial in bone tissue regeneration application.

Biocompatible polyvinyl alcohol and RISUG® blend polymeric films with spermicidal potential.

Majority of the commercially available vaginal contraceptives encompasses cervicovaginal membrane disrupting detergent molecules as pharmacologically active ingredients. Development of a tissue-compatible vaginal contraceptive agent is necessary to circumvent the existing demand for female contraception in the reproductive healthcare sector. With this objective, the present study delineates the use of RISUG® based non-hormonal female contraceptive films. RISUG® was blended with polyvinyl alcohol (PVOH) to formulate biodegradable intra-vaginal contraceptive films. The formulated films were characterized for their thermal, physiochemical and biological features. The results showed that both RISUG® and PVOH were miscible and interacted at the intermolecular level. Variations in the concentration of RISUG® resulted in the changes in physicochemical, thermal and rheological characteristics of the formulated blends. In vitro toxicological assay of the polymeric formulations did not show any significant toxicity. However, the blend films retained spermicidal potential of RISUG®. Furthermore, in vivo toxicological evaluation of the polymeric blend in the rat model revealed about their biocompatibility with no significant organ toxicity, hematological and biochemical alterations. These results together confirm the potential applicability of the PVOH:RISUG® blend films as a vaginal contraceptive.

Core-Shell Nanofibrous Scaffold Based on Polycaprolactone-Silk Fibroin Emulsion Electrospinning for Tissue Engineering Applications.

The vast domain of regenerative medicine comprises complex interactions between specific cells' extracellular matrix (ECM) towards intracellular matrix formation, its secretion, and modulation of tissue as a whole. In this domain, engineering scaffold utilizing biomaterials along with cells towards formation of living tissues is of immense importance especially for bridging the existing gap of late; nanostructures are offering promising capability of mechano-biological response needed for tissue regeneration. Materials are selected for scaffold fabrication by considering both the mechanical integrity and bioactivity cues they offer. Herein, polycaprolactone (PCL) (biodegradable polyester) and 'nature's wonder' biopolymer silk fibroin (SF) are explored in judicious combinations of emulsion electrospinning rather than conventional electrospinning of polymer blends. The water in oil (W/O) emulsions' stability is found to be dependent upon the concentration of SF (aqueous phase) dispersed in the PCL solution (organic continuous phase). The spinnability of the emulsions is more dependent upon the viscosity of the solution, dominated by the molecular weight of PCL and its concentration than the conductivity. The nanofibers exhibited distinct core-shell structure with better cytocompatibility and cellular growth with the incorporation of the silk fibroin biopolymer.