RESUMO
The immobilization of molecular electrocatalysts on conductive electrodes is an appealing strategy for enhancing their overall activity relative to those of analogous molecular compounds. In this study, we report on the interfacial electrochemistry of self-assembled two-dimensional nanosheets of graphene nanoribbons (GNR-2DNS) and analogs containing a Rh-based hydrogen evolution reaction (HER) catalyst (RhGNR-2DNS) immobilized on conductive electrodes. Proton-coupled electron transfer (PCET) taking place at N-centers of the nanoribbons was utilized as an indirect reporter of the interfacial electric fields experienced by the monolayer nanosheet located within the electric double layer. The experimental Pourbaix diagrams were compared with a theoretical model, which derives the experimental Pourbaix slopes as a function of parameter f, a fraction of the interfacial potential drop experienced by the redox-active group. Interestingly, our study revealed that GNR-2DNS was strongly coupled to glassy carbon electrodes (f = 1), while RhGNR-2DNS was not (f = 0.15). We further investigated the HER mechanism by RhGNR-2DNS using electrochemical and X-ray absorption spectroelectrochemical methods and compared it to homogeneous molecular model compounds. RhGNR-2DNS was found to be an active HER electrocatalyst over a broader set of aqueous pH conditions than its molecular analogs. We find that the improved HER performance in the immobilized catalyst arises due to two factors. First, redox-active bipyrimidine-based ligands were shown to dramatically alter the activity of Rh sites by increasing the electron density at the active Rh center and providing RhGNR-2DNS with improved catalysis. Second, catalyst immobilization was found to prevent catalyst aggregation that was found to occur for the molecular analog in the basic pH. Overall, this study provides valuable insights into the mechanism by which catalyst immobilization can affect the overall electrocatalytic performance.
RESUMO
The catalytic reduction of carbon dioxide to fuels and value-added chemicals is of significance for the development of carbon recycling technologies. One of the main challenges associated with catalytic CO2 reduction is product selectivity: the formation of carbon monoxide, molecular hydrogen, formate, methanol, and other products occurs with similar thermodynamic driving forces, making it difficult to selectively reduce CO2 to the target product. Significant scientific effort has been aimed at the development of catalysts that can suppress the undesired hydrogen evolution reaction and direct the reaction toward the selective formation of the desired products, which are easy to handle and store. Inspired by natural photosynthesis, where the CO2 reduction is achieved using NADPH cofactors in the Calvin cycle, we explore biomimetic metal-free hydride donors as catalysts for the selective reduction of CO2 to formate. Here, we outline our recent findings on the thermodynamic and kinetic parameters that control the hydride transfer from metal-free hydrides to CO2. By experimentally measuring and theoretically calculating the thermodynamic hydricities of a range of metal-free hydride donors, we derive structural and electronic factors that affect their hydride-donating abilities. Two dominant factors that contribute to the stronger hydride donors are identified to be (i) the stabilization of the positive charge formed upon HT via aromatization or by the presence of electron-donating groups and (ii) the destabilization of hydride donors through the anomeric effect or in the presence of significant structural constrains in the hydride molecule. Hydride donors with appropriate thermodynamic hydricities were reacted with CO2, and the formation of the formate ion (the first reduction step in CO2 reduction to methanol) was confirmed experimentally, providing an important proof of principle that organocatalytic CO2 reduction is feasible. The kinetics of hydride transfer to CO2 were found to be slow, and the sluggish kinetics were assigned in part to the large self-exchange reorganization energy associated with the organic hydrides in the DMSO solvent. Finally, we outline our approaches to the closure of the catalytic cycle via the electrochemical and photochemical regeneration of the hydride (R-H) from the conjugate hydride acceptors (R+). We illustrate how proton-coupled electron transfer can be efficiently utilized not only to lower the electrochemical potential at which the hydride regeneration takes place but also to suppress the unwanted dimerization that neutral radical intermediates tend to undergo. Overall, this account provides a summary of important milestones achieved in organocatalytic CO2 reduction and provides insights into the future research directions needed for the discovery of inexpensive catalysts for carbon recycling.
Assuntos
Biomimética , Dióxido de Carbono , Dióxido de Carbono/química , Catálise , Hidrogênio/química , OxirreduçãoRESUMO
Graphene quantum dots (GQDs) and nanoribbons (GNRs) are classes of nanographene molecules that exhibit highly tunable photophysical properties. There have been great strides in recent years to advance our understanding of nanographene photophysics and develop their use in light-harvesting systems, such as artificial photosynthesis. Here, we review the latest studies of GQDs and GNRs which have shed new light onto their photophysical underpinnings through computational and advanced spectroscopic techniques. We discuss how the size, symmetry, and shape of nanographenes influence their molecular orbital structures and, consequentially, their spectroscopic signatures. The scope of this review is to comprehensively lay out the general photophysics of nanographenes starting with benzene and building up to larger polycyclic aromatic hydrocarbons, GQDs, and GNRs. We also explore a collection of publications from recent years that build upon the current understanding of nanographene photophysics and their potential application in light-driven processes from display, lasing, and sensing technology to photocatalytic water splitting.
Assuntos
Grafite , Nanotubos de Carbono , Hidrocarbonetos Policíclicos Aromáticos , Pontos Quânticos , Grafite/química , Nanotubos de Carbono/química , Pontos Quânticos/químicaRESUMO
Proton-coupled electron transfer (PCET) was studied for the ground and excited electronic states of a [Ru(terpy)(bpm)(OH2)(PF6)2] complex, Ru-bpm. Cyclic voltammetry measurements show that the Ru(II)-aqua moiety undergoes PCET to form a Ru(IV)-oxo moiety in the anodic region, while the bpm ligand undergoes PCET to form bpmH2 in the cathodic region. The photophysical behavior of Ru-bpm was studied using steady-state and femtosecond transient UV-vis absorption spectroscopy, coupled with density functional theory (DFT) calculations. The lowest-lying excited state of Ru-bpm is described as a (Ru â bpm) metal-to-ligand charge-transfer (MLCT) state, while the metal-centered (MC) excited state was found computationally to be close in energy to the lowest-energy bright MLCT state (MC state was 0.16 eV above the MLCT state). The excited-state kinetics of Ru-bpm were found via transient absorption spectroscopy to be short-lived and were fit well to a biexponential function with lifetimes τ1 = 4 ps and τ2 = 65 ps in aqueous solution. Kinetic isotope effects of 1.75 (τ1) and 1.61 (τ2) were observed for both decay components, indicating that the solvent plays an important role in the excited-state dynamics of Ru-bpm. Based on the pH-dependent studies and the results from prior studies of similar Ru-complexes, we hypothesize that the 3MLCT state forms an excited-state hydrogen-bond adduct with the solvent molecules and that this process occurs with a 4 ps lifetime. The formation of such a hydrogen-bond complex is consistent with the electronic density accumulation at the peripheral N atoms of the bpm moiety in the 3MLCT state. The hydrogen-bonded state 3MLCT decays to the ground state with a 65 ps lifetime. Such a short lifetime is likely associated with the efficient vibrational energy transfer from the 3MLCT state to the solvent.
Assuntos
Rutênio , Eletrônica , Elétrons , Ligantes , Prótons , Rutênio/química , SolventesRESUMO
We report a study of chromophore-catalyst assemblies composed of light harvesting hexabenzocoronene (HBC) chromophores axially coordinated to two cobaloxime complexes. The chromophore-catalyst assemblies were prepared using bottom-up synthetic methodology and characterized using solid-state NMR, IR, and x-ray absorption spectroscopy. Detailed steady-state and time-resolved laser spectroscopy was utilized to identify the photophysical properties of the assemblies, coupled with time-dependent DFT calculations to characterize the relevant excited states. The HBC chromophores tend to assemble into aggregates that exhibit high exciton diffusion length (D = 18.5 molecule2/ps), indicating that over 50 chromophores can be sampled within their excited state lifetime. We find that the axial coordination of cobaloximes leads to a significant reduction in the excited state lifetime of the HBC moiety, and this finding was discussed in terms of possible electron and energy transfer pathways. By comparing the experimental quenching rate constant (1.0 × 109 s-1) with the rate constant estimates for Marcus electron transfer (5.7 × 108 s-1) and Förster/Dexter energy transfers (8.1 × 106 s-1 and 1.0 × 1010 s-1), we conclude that both Dexter energy and Marcus electron transfer process are possible deactivation pathways in CoQD-A. No charge transfer or energy transfer intermediate was detected in transient absorption spectroscopy, indicating fast, subpicosecond return to the ground state. These results provide important insights into the factors that control the photophysical properties of photocatalytic chromophore-catalyst assemblies.
RESUMO
We report a novel metal-free chemical reduction of CO2 by a recyclable benzimidazole-based organo-hydride, whose choice was guided by quantum chemical calculations. Notably, benzimidazole-based hydride donors rival the hydride-donating abilities of noble-metal-based hydrides such as [Ru(tpy)(bpy)H]+ and [Pt(depe)2H]+. Chemical CO2 reduction to the formate anion (HCOO-) was carried out in the absence of biological enzymes, a sacrificial Lewis acid, or a base to activate the substrate or reductant. 13CO2 experiments confirmed the formation of H13COO- by CO2 reduction with the formate product characterized by 1H NMR and 13C NMR spectroscopy and ESI-MS. The highest formate yield of 66% was obtained in the presence of potassium tetrafluoroborate under mild conditions. The likely role of exogenous salt additives in this reaction is to stabilize and shift the equilibrium toward the ionic products. After CO2 reduction, the benzimidazole-based hydride donor was quantitatively oxidized to its aromatic benzimidazolium cation, establishing its recyclability. In addition, we electrochemically reduced the benzimidazolium cation to its organo-hydride form in quantitative yield, demonstrating its potential for electrocatalytic CO2 reduction. These results serve as a proof of concept for the electrocatalytic reduction of CO2 by sustainable, recyclable, and metal-free organo-hydrides.
Assuntos
Benzimidazóis/química , Dióxido de Carbono/química , Formiatos/química , Di-Hidropiridinas/química , Eletroquímica , Modelos Moleculares , Conformação Molecular , Sais/química , Solventes/químicaRESUMO
Metal-free hydrides are of increasing research interest due to their roles in recent scientific advances in catalysis, such as hydrogen activation with frustrated Lewis pairs and electrocatalytic CO2 reduction with pyridinium and other aromatic cations. The structural design of hydrides for specific applications necessitates the correct description of their thermodynamic and kinetic prowess using reliable parameters - thermodynamic hydricity (ΔGH-) and nucleophilicity (N). This review summarizes reported experimental and calculated hydricity values for more than 200 metal-free hydride donors, including carbon-, boron-, nitrogen- and silicon-based hydrides. We describe different experimental and computational methods used to obtain these thermodynamic and kinetic parameters. Furthermore, tabulated data on metal-free hydrides are discussed in terms of structure-property relationships, relevance to catalysis and contemporary limitations for replacing transition-metal hydride catalysts. Finally, several selected applications of metal-free hydrides in catalysis are described, including photosynthetic CO2 reduction and hydrogen activation with frustrated Lewis pairs.
RESUMO
Thermodynamic hydricities (Δ GH-) in acetonitrile and dimethyl sulfoxide have been calculated and experimentally measured for several metal-free hydride donors: NADH analogs (BNAH, CN-BNAH, Me-MNAH, HEH), methylene tetrahydromethanopterin analogs (BIMH, CAFH), acridine derivatives (Ph-AcrH, Me2N-AcrH, T-AcrH, 4OH, 2OH, 3NH), and a triarylmethane derivative (6OH). The calculated hydricity values, obtained using density functional theory, showed a reasonably good match (within 3 kcal/mol) with the experimental values, obtained using "potential p Ka" and "hydride-transfer" methods. The hydride donor abilities of model compounds were in the 48.7-85.8 kcal/mol (acetonitrile) and 46.9-84.1 kcal/mol (DMSO) range, making them comparable to previously studied first-row transition metal hydride complexes. To evaluate the relevance of entropic contribution to the overall hydricity, Gibbs free energy differences (Δ GH-) obtained in this work were compared with the enthalpy (Δ HH-) values obtained by others. The results indicate that, even though Δ HH- values exhibit the same trends as Δ GH-, the differences between room-temperature Δ GH- and Δ HH- values range from 3 to 9 kcal/mol. This study also reports a new metal-free hydride donor, namely, an acridine-based compound 3NH, whose hydricity exceeds that of NaBH4. Collectively, this work gives a perspective of use metal-free hydride catalysts in fuel-forming and other reduction processes.
RESUMO
Metal-free motifs, such as graphitic carbon nitride, conjugated polymers, and doped nanostructures, are emerging as a new class of Earth-abundant materials for solar fuel devices. Although these metal-free structures show great potential, detailed mechanistic understanding of their performance remains limited. Here, we review important experimental and theoretical findings relevant to the role of metal-free motifs as either photoelectrodes or electrocatalysts. First, the light-harvesting characteristics of metal-free photoelectrodes (band energetics, exciton binding energies, charge carrier mobilities and lifetimes) are discussed and contrasted with those in traditional inorganic semiconductors (such as Si). Second, the mechanistic insights into the electrocatalytic oxygen reduction and evolution reactions, hydrogen evolution reaction, and carbon dioxide reduction reaction by metal-free motifs are summarized, including experimental surface-sensitive spectroscopy findings, studies on small molecular models, and computational modeling of these chemical transformations.
RESUMO
The excited-state heterolysis of acridinol-based derivatives leads to the release of the OH- ion and the formation of the corresponding acridinium cations. To evaluate the parameters that control the reaction barriers, the kinetics of excited-state OH- release from a series of acridinol photobases were studied using transient absorption spectroscopy. The rate constants were obtained in three solvents (methanol, butanol, and isobutanol), and the data were modeled using Marcus theory. The intrinsic reorganization energies obtained from these fits were found to correlate well with the solvent reorganization energies calculated using dielectric continuum model, suggesting that the excited-state OH- release occurs along the solvent reaction coordinate. Furthermore, the ability of acridinol photobases to photoinitiate chemical reactions was demonstrated using the Michael reaction between dimethylmalonate and nitrostyrene.
RESUMO
The triplet excited-state formation efficiency in a flavin derivative was increased by the introduction of iodine into the molecular framework. The transient absorption measurements showed that the intersystem crossing rate was 1.1 × 10(10) s(-1), significantly faster than in the parent flavin compound. Furthermore, the photocatalytic efficiency of iodoflavin was evaluated using the oxidation of benzyl alcohol as a model reaction. The benzaldehyde product yields were higher when iodoflavin was used as a photocatalyst, showing that the increased triplet yield directly translates into improved photocatalysis. The iodoflavin catalyst also allowed the use of higher substrate concentrations (since the undesired electron transfer from singlet excited state was minimized), which is expected to improve the practical aspects of photocatalysis by flavins.
Assuntos
Álcoois/química , Flavinas/química , Benzaldeídos/química , Catálise , Técnicas de Química Sintética , Transporte de Elétrons , Oxirredução , Espectrofotometria UltravioletaRESUMO
2,6-Diiodobodipy-styrylbodipy dyads were prepared to study the competing intersystem crossing (ISC) and the fluorescence-resonance-energy-transfer (FRET), and its effect on the photophysical property of the dyads. In the dyads, 2,6-diiodobodipy moiety was used as singlet energy donor and the spin converter for triplet state formation, whereas the styrylbodipy was used as singlet and triplet energy acceptors, thus the competition between the ISC and FRET processes is established. The photophysical properties were studied with steady-state UV-vis absorption and fluorescence spectroscopy, electrochemical characterization, and femto/nanosecond time-resolved transient absorption spectroscopies. FRET was confirmed with steady state fluorescence quenching and fluorescence excitation spectra and ultrafast transient absorption spectroscopy (kFRET = 5.0 × 10(10) s(-1)). The singlet oxygen quantum yield (ΦΔ = 0.19) of the dyad was reduced as compared with that of the reference spin converter (2,6-diiodobodipy, ΦΔ = 0.85), thus the ISC was substantially inhibited by FRET. Photoinduced intramolecular electron transfer (ET) was studied by electrochemical data and fluorescence quenching. Intermolecular triplet energy transfer was studied with nanosecond transient absorption spectroscopy as an efficient (ΦTTET = 92%) and fast process (kTTET = 5.2 × 10(4) s(-1)). These results are useful for designing organic triplet photosensitizers and for the study of the photophysical properties.
Assuntos
Processos Fotoquímicos , Elétrons , Compostos Ferrosos/química , Transferência Ressonante de Energia de Fluorescência , Metalocenos , Estrutura Molecular , Oxirredução , Prótons , Oxigênio Singlete/química , Solventes/química , Tolueno/química , Ácido Trifluoracético/químicaRESUMO
The photophysics of flavins is highly dependent on their environment. For example, 4a-hydroxy flavins display weak fluorescence in solution, but exhibit strong fluorescence when bound to a protein. To understand this behavior, we performed temperature-dependent fluorescent studies on an N(5)-alkylated 4a-hydroxy flavin: the putative bacterial luciferase fluorophore. We find an increase in fluorescence quantum yield upon reaching the glass transition temperature of the solvent. We then employ multiconfigurational quantum chemical methods to map the excited-state deactivation path of the system. The result reveals a shallow but barrierless excited state deactivation path that leads to a conical intersection displaying an orthogonal out-of-plane distortion of the terminal pyrimidine ring. The intersection structure readily explains the observed spectroscopic behavior in terms of an excited-state barrier imposed by the rigid glass cavity.
Assuntos
Luciferases Bacterianas/química , Flavinas , Fluorescência , Modelos MolecularesRESUMO
Mixed metal oxides (MMOs) are a promising class of electrocatalysts for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Despite their importance for sustainable energy schemes, our understanding of relevant reaction pathways, catalytically active sites, and synergistic effects is rather limited. Here, we applied synchrotron-based X-ray absorption spectroscopy (XAS) to explore the evolution of the amorphous Co-Cu-W MMO electrocatalyst, shown previously to be an efficient bifunctional OER and HER catalyst for water splitting. Ex situ XAS measurements provided structural environments and the oxidation state of the metals involved, revealing Co2+ (octahedral), Cu+/2+ (tetrahedral/square-planar), and W6+ (octahedral) centers. Operando XAS investigations, including X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS), elucidated the dynamic structural transformations of Co, Cu, and W metal centers during the OER and HER. The experimental results indicate that Co3+ and Cu0 are the active catalytic sites involved in the OER and HER, respectively, while Cu2+ and W6+ play crucial roles as structure stabilizers, suggesting strong synergistic interactions within the Co-Cu-W MMO system. These results, combined with the Tafel slope analysis, revealed that the bottleneck intermediate during the OER is Co3+ hydroperoxide, whose formation is accompanied by changes in the Cu-O bond lengths, pointing to a possible synergistic effect between Co and Cu ions. Our study reveals important structural effects taking place during MMO-driven OER/HER electrocatalysis and provides essential experimental insights into the complex catalytic mechanism of emerging noble-metal-free MMO electrocatalysts for full water splitting.
RESUMO
Two new Pt(II) 4,4'-di(5,9-diethyltridecan-7-yl)-2,2'-bipyridine complexes (1 and 2) bearing 9,9-diethyl-2-ethynyl-7-(2-(4-nitrophenyl)ethynyl)-9H-fluorene ligand and N-(4-(2-(9,9-diethyl-7-ethynyl-9H-fluoren-2-yl)ethynyl)phenyl)-N-phenylbenzeneamine ligand, respectively, were synthesized and characterized. Their photophysical properties were investigated systematically by UV-vis absorption, emission, and transient absorption (TA) spectroscopy, and the nonlinear absorption was studied by nonlinear transmission technique. Theoretical TD-DFT calculations using the CAM-B3LYP functional were carried out to determine the nature of the singlet excited electronic states and to assist in the assignment of significant transitions observed in experiments. Complex 1 exhibits an intense, structureless absorption band at ca. 397 nm in CH2Cl2 solution, which is attributed to mixed metal-to-ligand charge transfer ((1)MLCT)/ligand-to-ligand charge transfer ((1)LLCT)/intraligand charge transfer ((1)ILCT)/(1)π,π* transitions, and two (1)MLCT/(1)LLCT transitions in the 300-350 nm spectral region. Complex 2 possesses an intense acetylide ligand localized (1)π,π* absorption band at ca. 373 nm and a moderately intense (1)MLCT/(1)LLCT tail above 425 nm in CH2Cl2. Both complexes are emissive in solution at room temperature, with the emitting state being tentatively assigned to the predominant (3)π,π* state for 1, whereas the emitting state of 2 exhibits a switch from (3)π,π* state in high-polarity solvents to (3)MLCT/(3)LLCT state in low-polarity solvents. Both 1 and 2 exhibit strong singlet excited-state TA in the visible to NIR region, where reverse saturable absorption (RSA) is feasible. The spectroscopic studies and theoretical calculations indicate that the photophysical properties of these Pt complexes can be tuned drastically by extending the π-conjugation of the acetylide ligands. In addition, strong RSA was observed at 532 nm for nanosecond (ns) laser pulses from 1 and 2, demonstrating that the RSA of the Pt(II) diimine complexes can be improved by extending the π-conjugation of the acetylide ligands.
Assuntos
Compostos de Platina/química , Ligantes , Espectroscopia de Ressonância Magnética , Espectrofotometria UltravioletaRESUMO
A major impediment to Li-O2 battery commercialization is the low discharge capacities resulting from electronically insulating Li2O2 film growth on carbon electrodes. Redox mediation offers an effective strategy to drive oxygen chemistry into solution, avoiding surface-mediated Li2O2 film growth and extending discharge lifetimes. As such, the exploration of diverse redox mediator classes can aid the development of molecular design criteria. Here we report a class of triarylmethyl cations that are effective at enhancing discharge capacities up to 35-fold. Surprisingly, we observe that redox mediators with more positive reduction potentials lead to larger discharge capacities because of their improved ability to suppress the surface-mediated reduction pathway. This result provides important structure-property relationships for future improvements in redox-mediated O2/Li2O2 discharge capacities. Furthermore, we applied a chronopotentiometry model to investigate the zones of redox mediator standard reduction potentials and the concentrations needed to achieve efficient redox mediation at a given current density. We expect this analysis to guide future redox mediator exploration.
RESUMO
Developing efficient photocatalysts that perform multi electron redox reactions is critical to achieving solar energy conversion. One can reach this goal by developing systems which mimic natural photosynthesis and exploit strategies such as proton-coupled electron transfer (PCET) to achieve photochemical charge accumulation. We report herein a heteroleptic Cu(i)bis(phenanthroline) complex, Cu-AnQ, featuring a fused phenazine-anthraquinone moiety that photochemically accumulates two electrons in the anthraquinone unit via PCET. Full spectroscopic and electrochemical analyses allowed us to identify the reduced species and revealed that up to three electrons can be accumulated in the phenazine-anthraquinone ring system under electrochemical conditions. Continuous photolysis of Cu-AnQ in the presence of sacrificial electron donor produced doubly reduced monoprotonated photoproduct confirmed unambiguously by X-ray crystallography. Formation of this photoproduct indicates that a PCET process occurred during illumination and two electrons were accumulated in the system. The role of the heteroleptic Cu(i)bis(phenanthroline) moiety participating in the photochemical charge accumulation as a light absorber was evidenced by comparing the photolysis of Cu-AnQ and the free AnQ ligand with less reductive triethylamine as a sacrificial electron donor, in which photogenerated doubly reduced species was observed with Cu-AnQ, but not with the free ligand. The thermodynamic properties of Cu-AnQ were examined by DFT which mapped the probable reaction pathway for photochemical charge accumulation and the capacity for solar energy stored in the process. This study presents a unique system built on earth-abundant transition metal complex to store electrons, and tune the storage of solar energy by the degree of protonation of the electron acceptor.
RESUMO
The mechanism of photochemical CO2 reduction to formate by PCN-136, a Zr-based metal-organic framework (MOF) that incorporates light-harvesting nanographene ligands, has been investigated using steady-state and time-resolved spectroscopy and density functional theory (DFT) calculations. The catalysis was found to proceed via a "photoreactive capture" mechanism, where Zr-based nodes serve to capture CO2 in the form of Zr-bicarbonates, while the nanographene ligands have a dual role of absorbing light and storing one-electron equivalents for catalysis. We also find that the process occurs via a "two-for-one" route, where a single photon initiates a cascade of electron/hydrogen atom transfers from the sacrificial donor to the CO2-bound MOF. The mechanistic findings obtained here illustrate several advantages of MOF-based architectures in molecular photocatalyst engineering and provide insights on ways to achieve high formate selectivity.
RESUMO
The excited-state behavior of 9-hydroxy-10-methyl-9-phenyl-9,10-dihydroacridine and its derivative, 9-methoxy-10-methyl-9-phenyl-9,10-dihydroacridine (AcrOR, R = H, Me), was studied via femtosecond and nanosecond UV-vis transient absorption spectroscopy. The solvent effects on C-O bond cleavage were clearly identified: a fast heterolytic cleavage (τ = 108 ps) was observed in protic solvents, while intersystem crossing was observed in aprotic solvents. Fast heterolysis generates 10-methyl-9-phenylacridinium (Acr(+)) and (-)OH, which have a long recombination lifetime (no signal decay was observed within 100 µs). AcrOH exhibits the characteristic behavior needed for its utilization as a chromophore in the pOH jump experiment.
RESUMO
A series of platinum(II) diimine complexes with different substituents on fluorenyl acetylide ligands (1a-1e) were synthesized and characterized. The influence of the auxiliary substituent on the photophysics of these complexes has been systematically investigated spectroscopically and theoretically (using density functional theory (DFT) methods). All complexes exhibit ligand-centered (1)π,π* transitions in the UV and blue spectral region, and broad, structureless (1)MLCT/(1)LLCT (1a, 1b, 1d and 1e) or (1)MLCT/(1)LLCT/(1)π,π* (1c) absorption bands in the visible region. All complexes are emissive in solution at room temperature, with the emitting state is tentatively assigned to mixed (3)MLCT/(3)π,π* states. The degree of (3)π,π* and (3)MLCT mixing varies with different substituents and solvent polarities. Complexes 1a-1e exhibit relatively strong singlet and triplet transient absorption from 450 to 800 nm, at which point reverse saturable absorption (RSA) could occur. Nonlinear transmission experiments at 532 nm by using nanosecond laser pulses demonstrate that 1a-1e are strong reverse saturable absorbers and could potentially be used as broadband nonlinear absorbing materials.