Synthesis of Tridecacene by Multistep Single-Molecule Manipulation.

Acenes represent a unique class of polycyclic aromatic hydrocarbons that have fascinated chemists and physicists due to their exceptional potential for use in organic electronics. While recent advances in on-surface synthesis have resulted in higher acenes up to dodecacene, a comprehensive understanding of their fundamental properties necessitates their expansion toward even longer homologues. Here, we demonstrate the on-surface synthesis of tridecacene via atom-manipulation-induced conformational preparation and dissociation of a trietheno-bridged precursor on a Au(111) surface. The generated tridecacene has been investigated by scanning tunneling microscopy and spectroscopy (STM/STS), combined with first-principles calculations. We observe that the STS transport gap (1.09 eV) shrinks again following the gap reopening of dodecacene (1.4 eV). Spin-polarized density functional theory calculations confirm an antiferromagnetic open-shell ground-state electronic configuration for tridecacene in the gas phase. Interestingly, tridecacene's open-shell character is significantly reduced upon interaction with the Au(111) surface despite being only physisorbed. The interaction with the surface leads to a lowering of the magnetization of tridecacene, a reduced gap between the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO), compared to the gas phase, and a reduced relative energy to the nonmagnetic state, making it nearly isoenergetic. These observations show qualitatively that the influence of the Au(111) substrate on the properties of long acenes is significant, which is important for interpreting the measured STS transport gaps. Our work contributes to a fundamental understanding of the electronic properties of long acenes, confirming a nonmonotonous length-dependent HOMO-LUMO gap, and to the development of multistep tip-assisted synthesis of elusive compounds.

Synthesis of 2D Gallium Sulfide with Ultraviolet Emission by MOCVD.

Two-dimensional (2D) materials exhibit the potential to transform semiconductor technology. Their rich compositional and stacking varieties allow tailoring materials' properties toward device applications. Monolayer to multilayer gallium sulfide (GaS) with its ultraviolet band gap, which can be tuned by varying the layer number, holds promise for solar-blind photodiodes and light-emitting diodes as applications. However, achieving commercial viability requires wafer-scale integration, contrasting with established, limited methods such as mechanical exfoliation. Here the one-step synthesis of 2D GaS is introduced via metal-organic chemical vapor deposition on sapphire substrates. The pulsed-mode deposition of industry-standard precursors promotes 2D growth by inhibiting the vapor phase and on-surface pre-reactions. The interface chemistry with the growth of a Ga adlayer that results in an epitaxial relationship is revealed. Probing structure and composition validate thin-film quality and 2D nature with the possibility to control the thickness by the number of GaS pulses. The results highlight the adaptability of established growth facilities for producing atomically thin to multilayered 2D semiconductor materials, paving the way for practical applications.

Ion-Selective Assembly of Supertetrahedral Selenido Germanate Clusters for Alkali Metal Ion Capture and Separation.

Supertetrahedral chalcogenido (semi)metalate cluster-based frameworks possess high selectivity for alkali metal cations, matching the specific charge density of their inner surfaces, which enables their use as ion-exchange materials. Aggregates of the supertetrahedral chalcogenido metalate cluster offer even new perspectives for metal ion capture and separation. Herein, we report on ionothermal preparation of two corresponding model compounds, (C2C1Im)7[Cs@GeII4(GeIV4Se10)4] (1) and (C2C1Im)10[Na5(CN)6@Cu6(Ge4Se10)4(Cu)] (2). Their formation is reliant on one specific cation type each, Cs+ for 1 and Na+ for 2, thus providing promising separation potential during crystallization. Compound 1 is based on the largest discrete binary selenido germanate cluster reported to date and the first mixed-valent chalcogenido germanate(II/IV) supertetrahedron. Moreover, it adds to the few examples of chalcogenides capable of capturing Cs+ ions. Its high selectivity for Cs+ compared to that of Li+, Na+, K+, and Rb+ was confirmed by single-crystal X-ray diffraction, energy-dispersive X-ray spectroscopy, and electrospray ionization mass spectrometry. Quantum chemical studies indicate that smaller ions, K+ and Rb+, could also be embedded in an isolated cluster assembly, but as the cluster aggregate slightly distorts for crystallization, the selectivity for Cs+ becomes exclusive in the salt. The anionic substructure of compound 2 is based on a two-dimensional network of supramolecular assemblies and exhibits an exclusive preference for Na+. This work thus provides the first comprehensive insight into the selective incorporation of specific alkali metal ions into supramolecular aggregates of supertetrahedral chalcogenide clusters, as a promising basis for new ion trapping techniques─especially for heavy alkali metal ions that pose environmental challenges.

Revisiting Acepleiadylene: Two-Step Synthesis and π-Extension toward Nonbenzenoid Nanographene.

Acepleiadylene (APD), a nonbenzenoid nonalternant isomer of pyrene, exhibits different electronic properties from pyrene, but has been rarely studied since its first synthesis in 1956, probably due to the difficulties in synthesis and further derivatization. In this work, we revisited this long-known compound and developed a new two-step synthetic route to efficiently access APD on the gram scale. Theoretical and experimental characterizations elucidated the unique properties of APD as compared with its benzenoid isomer pyrene, particularly revealing its dipolar structure with a narrow optical gap. The functionalization of APD was demonstrated for the first time, providing doubly brominated APD as a key precursor for further π-extension. As a proof of concept, a π-extended APD and a cyclotrimer nanographene (C48H24) were constructed, opening up new avenues to nonbenzenoid nanographenes with low HOMO-LUMO gaps.

Pyrene-Terminated Tin Sulfide Clusters: Optical Properties and Deposition on a Metal Surface.

Herein, we present the synthesis of two pyrene-functionalized clusters, [(Rpyr Sn)4 S6 ]⋅2 CH2 Cl2 (4) and [(Rpyr Sn)4 Sn2 S10 ]⋅n CH2 Cl2 (n=4, 5 a; n=2, 5 b; Rpyr =CMe2 CH2 C(Me)N-NC(H)C16 H9 ), both of which form in reactions of the organotin sulfide cluster [(RN Sn)4 S6 ] (C; RN =CMe2 CH2 C(Me)N-NH2 ) with the well-known fluorescent dye 1-pyrenecarboxaldehyde (B). In contrast, reactions using an organotin sulfide cluster with another core structure, [(RN Sn)3 S4 Cl] (A), leads to formation of small molecular fragments, [(Rpyr Cl2 Sn)2 S] (1), (pyren-1-ylmethylene)hydrazine (2), and 1,2-bis(pyren-1-ylmethylene)hydrazine (3). Besides synthesis and structures of the new compounds, we report the influence of the inorganic core on the optical properties of the dye, which was analyzed exemplarily for compound 5 a via absorption and fluorescence spectroscopy. This cluster was also used for exploring the potential of such non-volatile clusters for deposition on a metal surface under vacuum conditions.

Topology Effects in Molecular Organic Electronic Materials: Pyrene and Azupyrene*.

Pyrene derivatives play a prominent role in organic electronic devices, including field effect transistors, light emitting diodes, and solar cells. The flexibility in the desired properties has previously been achieved by variation of substituents at the periphery of the pyrene backbone. In contrast, the influence of the topology of the central π-electron system on the relevant properties such as the band gap or the fluorescence behavior has not yet been addressed. In this work, pyrene is compared with its structural isomer azupyrene, which has a π-electron system with non-alternant topology. Using photoelectron spectroscopy, near edge X-ray absorption fine structure spectroscopy, and other methods, it is shown that the electronic band gap of azupyrene is by 0.72 eV smaller than that of pyrene. The difference of the optical band gaps is even larger with 1.09 eV, as determined by ultraviolet-visible absorption spectroscopy. The non-alternant nature of azupyrene is also associated with a more localized charge distribution. Further insight is provided by density functional theory (DFT) calculations of the molecular properties and ab initio coupled cluster calculations of the optical transitions. The concept of aromaticity is used to interpret the major topology-related differences.

On-Surface Synthesis and Characterization of a Cycloarene: C108 Graphene Ring.

The synthesis of cycloarenes in solution is challenging because of their low solubility and the often hindered cyclodehydrogenation reaction of their nonplanar precursors. Using an alternative on-surface synthesis protocol, we achieved an unprecedented double-stranded hexagonal cycloarene containing 108 sp2 carbon atoms. Its synthesis is based on hierarchical Ullmann coupling and cyclodehydrogenation of a specially designed precursor on a Au(111) surface. The structure and other properties of the cycloarene are investigated by scanning tunneling microscopy/spectroscopy, atomic force microscopy, and density functional theory calculations.

The Macrocycle versus Chain Competition in On-Surface Polymerization: Insights from Reactions of 1,3-Dibromoazulene on Cu(111).

Ring/chain competition in oligomerization reactions represents a long-standing topic of synthetic chemistry and was treated extensively for solution reactions but is not well-understood for the two-dimensional confinement of surface reactions. Here, the kinetic and thermodynamic principles of ring/chain competition in on-surface synthesis are addressed by scanning tunneling microscopy, X-ray photoelectron spectroscopy, and Monte Carlo simulations applied to azulene-based organometallic oligomers on Cu(111). Analysis of experiments and simulations reveals how the ring/chain ratio can be controlled through variation of coverage and temperature. At room temperature, non-equilibrium conditions prevail and kinetic control leads to preferential formation of the entropically favored chains. In contrast, high-temperature equilibrium conditions are associated with thermodynamic control, resulting in increased yields of the energetically favored rings. The optimum conditions for ring formation include the lowest possible temperature within the regime of thermodynamic control and a low coverage. The general implications are discussed and compared to the solution case.

Nanoribbons with Nonalternant Topology from Fusion of Polyazulene: Carbon Allotropes beyond Graphene.

Various two-dimensional (2D) carbon allotropes with nonalternant topologies, such as pentaheptites and phagraphene, have been proposed. Predictions indicate that these metastable carbon polymorphs, which contain odd-numbered rings, possess unusual (opto)electronic properties. However, none of these materials has been achieved experimentally due to synthetic challenges. In this work, by using on-surface synthesis, nanoribbons of the nonalternant graphene allotropes, phagraphene and tetra-penta-hepta(TPH)-graphene, have been obtained by dehydrogenative C-C coupling of 2,6-polyazulene chains. These chains were formed in a preceding reaction step via on-surface Ullmann coupling of 2,6-dibromoazulene. Low-temperature scanning probe microscopies with CO-functionalized tips and density functional theory calculations have been used to elucidate their structural properties. The proposed synthesis of nonalternant carbon nanoribbons from the fusion of synthetic line-defects may pave the way for large-area preparation of novel 2D carbon allotropes.

Binary Lead Fluoride Pb3 F8.

The binary lead fluoride Pb3 F8 was synthesized by the reaction of anhydrous HF with Pb3 O4 or by the reaction of BrF3 with PbF2 . The compound was characterized by single-crystal and powder X-ray diffraction, IR, Raman, and solid-state MAS 19 F NMR spectroscopy, as well as thermogravimetric analysis, XP and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. Solid-state quantum-chemical calculations are provided for the vibrational analyses and band assignments. The electronic band structure offers an inside view of the mixed valence compound.

Topology-Selective Ullmann Coupling on Metal Surfaces by Precursor Design and Adsorbate-Substrate Interaction: Towards the Control over Polymer versus Macrocycle Formation.

In polymerization reactions, controlling the formation of open-chain versus cyclic product topologies is necessary because of the different properties of polymer chains and macrocycles. Here, we report a topology-selective Ullmann coupling on metal surfaces with control of the ring/chain competition. The precursor employed is 4,4''-dibromo-ortho-terphenyl (DBOTP), which features a 60° bent feature and polymerizes into zigzag polyphenylene chains on both Au(111) and Ag(111) surface via Ullmann coupling. However, the cyclotrimerization of the precursor occurs only on Ag(111) but not Au(111). It is proposed that the cyclotrimerization reaction on Au(111) is blocked, because the necessary C-C coupling of two carbon radicals with different vertical heights is unfavored. Such height difference stems from the intrinsic steric repulsion between the two ortho-substituted phenyl groups. On Ag(111), the stronger adsorbate-substrate interaction reduces the extent of the tilting of the phenyl group, resulting in a smaller height difference of the carbon radicals and consequently in the increased probability for the formation of the cyclic trimer.

Precise Monoselective Aromatic C-H Bond Activation by Chemisorption of Meta-Aryne on a Metal Surface.

Aromatic C-H bond activation has attracted much attention due to its versatile applications in the synthesis of aryl-containing chemicals. The major challenge lies in the minimization of the activation barrier and maximization of the regioselectivity. Here, we report the highly selective activation of the central aromatic C-H bond in meta-aryne species anchored to a copper surface, which catalyzes the C-H bond dissociation. Two prototype molecules, i.e., 4',6'-dibromo- meta-terphenyl and 3',5'-dibromo- ortho-terphenyl, have been employed to perform C-C coupling reactions on Cu(111). The chemical structures of the resulting products have been clarified by a combination of scanning tunneling microscopy and noncontact atomic force microscopy. Both methods demonstrate a remarkable weakening of the targeted C-H bond. Density functional theory calculations reveal that this efficient C-H activation stems from the extraordinary chemisorption of the meta-aryne on the Cu(111) surface, resulting in the close proximity of the targeted C-H group to the Cu(111) surface and the absence of planarity of the phenyl ring. These effects lead to a lowering of the C-H dissociation barrier from 1.80 to 1.12 eV, in agreement with the experimental data.

Surface-catalyzed C-C covalent coupling strategies toward the synthesis of low-dimensional carbon-based nanostructures.

Carbon-based nanostructures have attracted tremendous interest because of their versatile and tunable properties, which depend on the bonding type of the constituting carbon atoms. Graphene, as the most prominent representative of the π-conjugated carbon-based materials, consists entirely of sp(2)-hybridized carbon atoms and exhibits a zero band gap. Recently, countless efforts were made to open and tune the band gap of graphene for its applications in semiconductor devices. One promising method is periodic perforation, resulting in a graphene nanomesh (GNM), which opens the band gap while maintaining the exceptional transport properties. However, the typically employed lithographic approach for graphene perforation is difficult to control at the atomic level. The complementary bottom-up method using surface-assisted carbon-carbon (C-C) covalent coupling between organic molecules has opened up new possibilities for atomically precise fabrication of conjugated nanostructures like GNM and graphene nanoribbons (GNR), although with limited maturity. A general drawback of the bottom-up approach is that the desired structure usually does not represent the global thermodynamic minimum. It is therefore impossible to improve the long-range order by postannealing, because once the C-C bond formation becomes reversible, graphene as the thermodynamically most stable structure will be formed. This means that only carefully chosen precursors and reaction conditions can lead to the desired (non-graphene) material. One of the most popular and frequently used organic reactions for on-surface C-C coupling is the Ullmann reaction of aromatic halides. While experimentally simple to perform, the irreversibility of the C-C bond formation makes it a challenge to obtain long-range ordered nanostructures. With no postreaction structural improvement possible, the assembly process must be optimized to result in defect-free nanostructures during the initial reaction, requiring complete reaction of the precursors in the right positions. Incomplete connections typically result when mobile precursor monomers are blocked from reaching unsaturated reaction sites of the preformed nanostructures. For example, monomers may not be able to reach a randomly formed internal cavity of a two-dimensional (2D) nanostructure island due to steric hindrance in 2D confinement, leaving reaction sites in the internal cavity unsaturated. Wrong connections between precursor monomers, here defined as intermolecular C-C bonds forcing the monomer into a nonideal position within the structure, are usually irreversible and can induce further structural defects. The relative conformational flexibility of the monomer backbones permits connections between deformed monomers when they encounter strong steric hindrance. This, however, usually leads to heterogeneous structural motifs in the formed nanostructures. This Account reviews some of the latest developments regarding on-surface C-C coupling strategies toward the synthesis of carbon-based nanostructures by addressing the above-mentioned issues. The strategies include Ullmann coupling and other, "cleaner" alternative C-C coupling reactions like Glaser coupling, cyclo-dehydrogenation, and dehydrogenative coupling. The choice of substrate materials and precursor designs is crucial for optimizing substrate reactivity and precursor diffusion rates, and to reduce events of wrong linkage. Hierarchical polymerization is employed to steer the coupling route, which effectively improves the completeness of the reaction. Effects of byproducts on nanostructure formation is comprehended with both experimental and theoretical studies.

The role of the substrate structure in the on-surface synthesis of organometallic and covalent oligophenylene chains.

The influences of the substrate structure on the formation of one-dimensional organometallic and covalent oligomers on a Cu(110) surface were studied using scanning tunneling microscopy (STM), X-ray photoemission spectroscopy (XPS), and low energy electron diffraction (LEED) in ultrahigh vacuum (UHV). Vapor deposition of submonolayer 4,4''-dibromo-meta-terphenyl (DMTP) onto a Cu(110) surface at 300 K leads to scission of C-Br bonds and the formation of organometallic chains (cis/trans and all-trans) connected by C-Cu-C bonds. Larger islands (120 × 120 nm(2)) of all-trans zigzag organometallic chains as sole products were obtained by the deposition of DMTP onto Cu(110) held at 383 K. The domains are oriented along two directions with an angle of ±13° relative to the [0 0 1] direction due to the two-fold symmetry of the Cu(110) surface lattice. This study reveals at a sub-molecular level that the organometallic chains firstly lose copper atoms and then undergo C-C coupling into oligophenylene chains at a substrate temperature around 417 K. Annealing the large islands of organometallic chains at 458 K results in the formation of completely C-C covalently bonded zigzag oligophenylene chains. The zigzag angle of 125° slightly deviates from the ideal value of 120°. This is attributed to a stretching of the zigzag oligophenylene chains due to substrate template effects.

Formation of an interphase layer during deposition of cobalt onto tetraphenylporphyrin: a hard X-ray photoelectron spectroscopy (HAXPES) study.

The interface formation upon vapor deposition of a metal onto a molecular organic semiconductor was studied using a well-defined complexation reaction between a metal and a porphyrin. Specifically, metallic cobalt (Co) was vapor deposited onto a thin film of 2H-tetraphenylporphyrin (2HTPP) at room temperature. The resulting interface was probed with Hard X-ray Photoelectron Spectroscopy (HAXPES) using photon energies between 2 and 6 keV to obtain a detailed depth profile of the chemical composition. Characteristic changes in the N 1s core level signals reveal the formation of a cobalt tetraphenylporphyrin (CoTPP) layer between the Co and 2HTPP layers. Assuming an abrupt interface between CoTPP and 2HTPP (layer-by-layer model), analysis of the XPS data results in a thickness of the CoTPP reaction layer of 1.6 nm. However, a more advanced numerical analysis allowed us to reconstruct details of the actual depth distribution of the CoTPP interphase layer: up to a depth of 1.5 nm, all 2HTPP molecules were converted into CoTPP. Beyond this depth, the CoTPP concentration decreases sharply within 0.15 nm to zero.

Reactions of Superoxide with Iron Porphyrins in the Bulk and the Near-Surface Region of Ionic Liquids.

The redox reaction of superoxide (KO2) with highly charged iron porphyrins (Fe(P4+), Fe(P8+), and Fe(P8-)) has been investigated in the ionic liquids (IL) [EMIM][Tf2N] (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) and [EMIM][B(CN)4] (1-ethyl-3-methylimidazolium tetracyanoborate) by using time-resolved UV/vis stopped-flow, electrochemistry, cryospray mass spectrometry, EPR, and XPS measurements. Stable KO2 solutions in [EMIM][Tf2N] can be prepared up to a 15 mM concentration and are characterized by a signal in EPR spectrum at g = 2.0039 and by the 1215 cm(-1) stretching vibration in the resonance Raman spectrum. While the negatively charged iron porphyrin Fe(P8-) does not react with superoxide in IL, Fe(P4+) and Fe(P8+) do react in a two-step process (first a reduction of the Fe(III) to the Fe(II) form, followed by the binding of superoxide to Fe(II)). In the reaction with KO2, Fe(P4+) and Fe(P8+) show similar rate constants (e.g., in the case of Fe(P4+): k1 = 18.6 ± 0.5 M(-1) s(-1) for the first reaction step, and k2 = 2.8 ± 0.1 M(-1) s(-1) for the second reaction step). Notably, these rate constants are four to five orders of magnitude lower in [EMIM][Tf2N] than in conventional solvents such as DMSO. The influence of the ionic liquid is also apparent during electrochemical experiments, where the redox potentials for the corresponding Fe(III)/Fe(II) couples are much more negative in [EMIM][Tf2N] than in DMSO. This modified redox and kinetic behavior of the positively charged iron porphyrins results from their interactions with the anions of the ionic liquid, while the nucleophilicity of the superoxide is reduced by its interactions with the cations of the ionic liquid. A negligible vapor pressure of [EMIM][B(CN)4] and a sufficient enrichment of Fe(P8+) in a close proximity to the surface enabled XPS measurements as a case study for monitoring direct changes in the electronic structure of the metal centers during redox processes in solution and at liquid/solid interfaces.

LiNi(0.5)Mn(1.5)O4 high-voltage cathode coated with Li4Ti5O12: a hard X-ray photoelectron spectroscopy (HAXPES) study.

A Li4Ti5O12 (LTO) film was coated as buffer layer onto a LiNi0.5Mn1.5O4 (LNMO) high-voltage cathode, and after cycling of the cathode in a battery electrolyte, the LTO film was investigated by means of synchrotron radiation based hard X-ray photoelectron spectroscopy (HAXPES). By tuning the photon energy between 2 keV and 6 keV, we obtained non-destructive depth profiles of the coating material with probing depths ranging from 6 nm to 20 nm. The coating was found to be covered by a few nanometers thin surface layer resulting from electrolyte decomposition. This layer consisted predominantly of organic polymers as well as metal fluorides and fluorophosphates. A positive influence of the Li4Ti5O12 coating with regard to the size and stability of the surface layer was found. The coating itself consisted of a uniform mixture of Li(I), Ti(IV), Ni(II) and Mn(IV) oxides that most likely adopted a spinel structure by forming a solid solution of the two spinels LiNi0.5Mn1.5O4 and Li4Ti5O12 with Li, Mn, Ni and Ti cations mixing on the spinel octahedral sites. The diffusion of Ni and Mn ions into the Li4Ti5O12 lattice occurred during the heat treatment when preparing the cathode. The doping of Li4Ti5O12 with the open d-shell ions Ni(2+) (d(8)) and Mn(4+) (d(3)) should increase the electronic conductivity of the coating significantly, as was found in previous studies. The complex signal structure of the Ti 2p, Ni 2p and Mn 2p core levels provides insight into the chemical nature of the transition metal ions.

Tribromobenzene on Cu(111): Temperature-dependent formation of halogen-bonded, organometallic, and covalent nanostructures.

The temperature-controlled surface-assisted synthesis of halogen bonded, organometallic, and covalent nanostructures based on 1,3,5-tribromo-benzene (TriBB) was studied with scanning tunneling microscopy and X-ray photoemission spectroscopy in ultrahigh vacuum. Vapor deposition of TriBB onto a Cu(111) surface held at 90 K leads to the formation of large domains of a honeycomb-like organic monolayer structure stabilized by triangular nodes with Br⋯Br intermolecular bonds. Upon annealing the organic monolayer to ∼140 K, a new hexagonal close-packed structure with intact TriBB molecules connected by Cu adatoms is formed. Further warming up the sample to 300 K gives rise to the scission of C-Br bonds and formation of C-Cu-C bonds between phenyl fragments such that stable dendritic organometallic networks are formed. Larger islands of organometallic networks are obtained by maintaining the temperature of Cu(111) at 420 K during deposition of TriBB. Simultaneously, large islands of Br atoms are formed around the organometallic networks. Annealing the more extended organometallic network (prepared at 420 K) to 520 K leads to the formation of a branched covalent organic framework (COF) which comprises structural elements of porous graphene and is surrounded by Br islands. These organometallic networks and COFs appear as small dendritic and branched domains, most likely due to the steric influence exerted by the Br islands.

Where does it vibrate? Raman spectromicroscopy on a single molecule.

Tip-enhanced Raman spectroscopy combines scanning probe techniques with Raman spectroscopy. Latest developments permit the chemical mapping of individual adsorbed molecules by monitoring molecular vibrations with sub-nanometer resolution. Increased efficiency and reduced photodegradation make this method suitable for studies of adsorbed organic and biomolecules in surface science, catalysis, biochemistry, and related fields.