3D Breast Volume Estimation.

INTRODUCTION: Breast volume estimation is considered crucial for breast cancer surgery planning. A single, easy, and reproducible method to estimate breast volume is not available. This study aims to evaluate, in patients proposed for mastectomy, the accuracy of the calculation of breast volume from a low-cost 3D surface scan (Microsoft Kinect) compared to the breast MRI and water displacement technique. MATERIAL AND METHODS: Patients with a Tis/T1-T3 breast cancer proposed for mastectomy between July 2015 and March 2017 were assessed for inclusion in the study. Breast volume calculations were performed using a 3D surface scan and the breast MRI and water displacement technique. Agreement between volumes obtained with both methods was assessed with the Spearman and Pearson correlation coefficients. RESULTS: Eighteen patients with invasive breast cancer were included in the study and submitted to mastectomy. The level of agreement of the 3D breast volume compared to surgical specimens and breast MRI volumes was evaluated. For mastectomy specimen volume, an average (standard deviation) of 0.823 (0.027) and 0.875 (0.026) was obtained for the Pearson and Spearman correlations, respectively. With respect to MRI annotation, we obtained 0.828 (0.038) and 0.715 (0.018). DISCUSSION: Although values obtained by both methodologies still differ, the strong linear correlation coefficient suggests that 3D breast volume measurement using a low-cost surface scan device is feasible and can approximate both the MRI breast volume and mastectomy specimen with sufficient accuracy. CONCLUSION: 3D breast volume measurement using a depth-sensor low-cost surface scan device is feasible and can parallel MRI breast and mastectomy specimen volumes with enough accuracy. Differences between methods need further development to reach clinical applicability. A possible approach could be the fusion of breast MRI and the 3D surface scan to harmonize anatomic limits and improve volume delimitation.

Oncoplastic Breast Consortium consensus conference on nipple-sparing mastectomy.

PURPOSE: Indications for nipple-sparing mastectomy (NSM) have broadened to include the risk reducing setting and locally advanced tumors, which resulted in a dramatic increase in the use of NSM. The Oncoplastic Breast Consortium consensus conference on NSM and immediate reconstruction was held to address a variety of questions in clinical practice and research based on published evidence and expert panel opinion. METHODS: The panel consisted of 44 breast surgeons from 14 countries across four continents with a background in gynecology, general or reconstructive surgery and a practice dedicated to breast cancer, as well as a patient advocate. Panelists presented evidence summaries relating to each topic for debate during the in-person consensus conference. The iterative process in question development, voting, and wording of the recommendations followed the modified Delphi methodology. RESULTS: Consensus recommendations were reached in 35, majority recommendations in 24, and no recommendations in the remaining 12 questions. The panel acknowledged the need for standardization of various aspects of NSM and immediate reconstruction. It endorsed several oncological contraindications to the preservation of the skin and nipple. Furthermore, it recommended inclusion of patients in prospective registries and routine assessment of patient-reported outcomes. Considerable heterogeneity in breast reconstruction practice became obvious during the conference. CONCLUSIONS: In case of conflicting or missing evidence to guide treatment, the consensus conference revealed substantial disagreement in expert panel opinion, which, among others, supports the need for a randomized trial to evaluate the safest and most efficacious reconstruction techniques.

Positive Margins After Oncoplastic Surgery for Breast Cancer.

BACKGROUND: Oncoplastic techniques applied to breast-conserving surgery (BCS) allow large-volume resections without compromising cosmetic results. Level II oncoplastic techniques are based on mammoplasties. When required, they allow resection of more than 20 % of the breast volume; however, a subgroup of these patients will still have positive margins. The clinical management of positive margins after level II oncoplastic surgery (OPS) is a challenge. METHODS: All patients who had undergone level II oncoplastic techniques at The Paris Breast Center between 2004 and 2013 were reviewed. The choice of the optimal mammoplasty technique was based on the tumor location and the 'quadrant per quadrant atlas'. RESULTS: A total of 277 level II oncoplastic techniques were performed on 272 patients. The mean tumor size was 26 mm (range 2-160 mm), with a mean resected weight of 175 g (range 50-1540 g). The rate of positive margins was 11.9 %. Risk factors for positive margins identified in univariate analysis were histologic subgroup, tumor size, T stage and grade. In multivariate analysis, only patients with invasive lobular carcinoma had a significantly higher risk of positive margins. A second operation was required in 33 cases, and a third operation was required in three cases because of positive margins. Final breast conservation rate was 91 %. CONCLUSIONS: Level II OPS results in a low positive margin rate despite large tumor size. Patients with involved margins can be offered a second BCS if the remaining volume allows this.

Augmented Reality in Breast Surgery Education.

Introduction: Augmented reality (AR) has demonstrated a potentially wide range of benefits and educational applications in the virtual health ecosystem. The concept of real-time data acquisition, machine learning-aided processing, and visualization is a foreseen ambition to leverage AR applications in the healthcare sector. This breakthrough with immersive technologies like AR, mixed reality, virtual reality, or extended reality will hopefully initiate a new surgical era: that of the use of the so-called surgical metaverse. Methods: This paper focuses on the future use of AR in breast surgery education describing two potential applications (surgical remote telementoring and impalpable breast cancer localization using AR), along with the technical needs to make it possible. Conclusion: Surgical telementoring and impalpable tumors noninvasive localization are two examples that can have success in the future provided the improvements in both data transformation and infrastructures are capable to overcome the current challenges and limitations.

Breast cancer surgery with augmented reality.

INTRODUCTION: Innovations in 3D spatial technology and augmented reality imaging driven by digital high-tech industrial science have accelerated experimental advances in breast cancer imaging and the development of medical procedures aimed to reduce invasiveness. PRESENTATION OF CASE: A 57-year-old post-menopausal woman presented with screen-detected left-sided breast cancer. After undergoing all staging and pre-operative studies the patient was proposed for conservative breast surgery with tumor localization. During surgery, an experimental digital and non-invasive intra-operative localization method with augmented reality was compared with the standard pre-operative localization with carbon tattooing (institutional protocol). The breast surgeon wearing an augmented reality headset (Hololens) was able to visualize the tumor location projection inside the patient's left breast in the usual supine position. DISCUSSION: This work describes, to our knowledge, the first experimental test with a digital non-invasive method for intra-operative breast cancer localization using augmented reality to guide breast conservative surgery. In this case, a successful overlap of the previous standard pre-operative marks with carbon tattooing and tumor visualization inside the patient's breast with augmented reality was obtained. CONCLUSION: Breast cancer conservative guided surgery with augmented reality can pave the way for a digital non-invasive method for intra-operative tumor localization.

3D digital breast cancer models with multimodal fusion algorithms.

Breast cancer image fusion consists of registering and visualizing different sets of a patient synchronized torso and radiological images into a 3D model. Breast spatial interpretation and visualization by the treating physician can be augmented with a patient-specific digital breast model that integrates radiological images. But the absence of a ground truth for a good correlation between surface and radiological information has impaired the development of potential clinical applications. A new image acquisition protocol was designed to acquire breast Magnetic Resonance Imaging (MRI) and 3D surface scan data with surface markers on the patient's breasts and torso. A patient-specific digital breast model integrating the real breast torso and the tumor location was created and validated with a MRI/3D surface scan fusion algorithm in 16 breast cancer patients. This protocol was used to quantify breast shape differences between different modalities, and to measure the target registration error of several variants of the MRI/3D scan fusion algorithm. The fusion of single breasts without the biomechanical model of pose transformation had acceptable registration errors and accurate tumor locations. The performance of the fusion algorithm was not affected by breast volume. Further research and virtual clinical interfaces could lead to fast integration of this fusion technology into clinical practice.

Automatic detection of perforators for microsurgical reconstruction.

The deep inferior epigastric perforator (DIEP) is the most commonly used free flap in mastectomy reconstruction. Preoperative imaging techniques are routinely used to detect location, diameter and course of perforators, with direct intervention from the imaging team, who subsequently draw a chart that will help surgeons choosing the best vascular support for the reconstruction. In this work, the feasibility of using a computer software to support the preoperative planning of 40 patients proposed for breast reconstruction with a DIEP flap is evaluated for the first time. Blood vessel centreline extraction and local characterization algorithms are applied to identify perforators and compared with the manual mapping, aiming to reduce the time spent by the imaging team, as well as the inherent subjectivity to the task. Comparing with the measures taken during surgery, the software calibre estimates were worse for vessels smaller than 1.5 mm (P = 6e-4) but better for the remaining ones (P = 2e-3). Regarding vessel location, the vertical component of the software output was significantly different from the manual measure (P = 0.02), nonetheless that was irrelevant during surgery as errors in the order of 2-3 mm do not have impact in the dissection step. Our trials support that a reduction of the time spent is achievable using the automatic tool (about 2 h/case). The introduction of artificial intelligence in clinical practice intends to simplify the work of health professionals and to provide better outcomes to patients. This pilot study paves the way for a success story.

Three-Dimensional Planning Tool for Breast Conserving Surgery: A Technological Review.

Breast cancer is one of the most common malignancies affecting women worldwide. However, despite its incidence trends have increased, the mortality rate has significantly decreased. The primary concern in any cancer treatment is the oncological outcome but, in the case of breast cancer, the surgery aesthetic result has become an important quality indicator for breast cancer patients. In this sense, an adequate surgical planning and prediction tool would empower the patient regarding the treatment decision process, enabling a better communication between the surgeon and the patient and a better understanding of the impact of each surgical option. To develop such tool, it is necessary to create complete 3D model of the breast, integrating both inner and outer breast data. In this review, we thoroughly explore and review the major existing works that address, directly or not, the technical challenges involved in the development of a 3D software planning tool in the field of breast conserving surgery.