Application of Hydrothermal Time Models to Predict Sclerotial Germination of Athelia rolfsii.

Athelia rolfsii, causal agent of "southern blight" disease, is a soilborne fungal pathogen with a wide host range of more than 500 species. This study's objectives were to (i) quantify the effects of two environmental factors, temperature and soil moisture, on germination of A. rolfsii inoculum (sclerotia), which is a critical event for the onset of disease epidemics and (ii) predict the timing of sclerotial germination by applying population-based threshold-type hydrothermal time (HTT) models. We conducted in vitro germination experiments with three isolates of A. rolfsii isolated from peanuts, which were tested at five temperatures (T), ranging from 17 to 40°C, four matric potentials (Ψm) between -0.12 and -1.57 MPa, and two soil types (fine sand and loamy fine sand), using a factorial design. When Ψm was maintained between -0.12 and -0.53 MPa, T from 22 to 34°C was found to be conducive to sclerotial germination (>50%). The HTT models were fitted for a range of T (22 to 34°C) and Ψm (-0.12 to -1.57 MPa) that accounted for 84% or more of variation in the timing of sclerotial germination. The estimated base T ranged between 0 and 4.5°C and the estimated base Ψm between -2.96 and -1.52 MPa. The results suggest that the HTT modeling approach is a suitable means of predicting the timing of A. rolfsii sclerotial germination. This HTT methodology can potentially be tested to fine-tune fungicide application timing and in-season A. rolfsii management strategies. [Formula: see text] Copyright © 2024 The Author(s). This is an open access article distributed under the CC BY 4.0 International license.

Optical Camera Communications in Healthcare: A Wearable LED Transmitter Evaluation during Indoor Physical Exercise.

This paper presents an experimental evaluation of a wearable light-emitting diode (LED) transmitter in an optical camera communications (OCC) system. The evaluation is conducted under conditions of controlled user movement during indoor physical exercise, encompassing both mild and intense exercise scenarios. We introduce an image processing algorithm designed to identify a template signal transmitted by the LED and detected within the image. To enhance this process, we utilize the dynamics of controlled exercise-induced motion to limit the tracking process to a smaller region within the image. We demonstrate the feasibility of detecting the transmitting source within the frames, and thus limit the tracking process to a smaller region within the image, achieving an reduction of 87.3% for mild exercise and 79.0% for intense exercise.

Cost-Effective Optical Wireless Sensor Networks: Enhancing Detection of Sub-Pixel Transmitters in Camera-Based Communications.

In the domain of the Internet of Things (IoT), Optical Camera Communication (OCC) has garnered significant attention. This wireless technology employs solid-state lamps as transmitters and image sensors as receivers, offering a promising avenue for reducing energy costs and simplifying electronics. Moreover, image sensors are prevalent in various applications today, enabling dual functionality: recording and communication. However, a challenge arises when optical transmitters are not in close proximity to the camera, leading to sub-pixel projections on the image sensor and introducing strong channel dependence. Previous approaches, such as modifying camera optics or adjusting image sensor parameters, not only limited the camera's utility for purposes beyond communication but also made it challenging to accommodate multiple transmitters. In this paper, a novel sub-pixel optical transmitter discovery algorithm that overcomes these limitations is presented. This algorithm enables the use of OCC in scenarios with static transmitters and receivers without the need for camera modifications. This allows increasing the number of transmitters in a given scenario and alleviates the proximity and size limitations of the transmitters. Implemented in Python with multiprocessing programming schemes for efficiency, the algorithm achieved a 100% detection rate in nighttime scenarios, while there was a 89% detection rate indoors and a 72% rate outdoors during daylight. Detection rates were strongly influenced by varying transmitter types and lighting conditions. False positives remained minimal, and processing times were consistently under 1 s. With these results, the algorithm is considered suitable for export as a web service or as an intermediary component for data conversion into other network technologies.

Empirical study of an underwater optical camera communication system under turbulent conditions.

This paper presents an experimental study of the turbulence impact caused by temperature inhomogeneity and air bubbles on a global shutter-based underwater optical camera communication (UOCC). The effects of these two phenomena on UOCC links are illustrated in terms of the intensity variations and an associated reduction in the average received intensity of the illuminated pixels corresponding to the optical source projection and the dispersion of the projection on the captured images. Additionally, it is shown that the area of illuminated pixels in the temperature-induced turbulence scenario is higher than in the bubbly water case. To analyze the effects of those two phenomena on the optical link performance, the signal-to-noise ratio (SNR) of the system is evaluated by considering different points as the regions of interest (ROI) from the light source projection of the captured images. The results indicate that the system performance is improved by averaging over the value of several pixels produced by the point spread function, compared to simply using the central and the maximum pixel value as the ROIs.

Soil Bacterial Communities Across Seven Rhizoma Peanut Cultivars (Arachis glabrata Benth.) Respond to Seasonal Variation.

Soil microorganisms play key roles in soil nutrient transformations and have a notable effect on plant growth and health. Different plant genotypes can shape soil microbial patterns via the secretion of root exudates and volatiles, but it is uncertain how a difference in soil microorganisms induced by crop cultivars will respond to short-term seasonal variations. A field experiment was conducted to assess the changes in soil bacterial communities of seven rhizoma peanut (Arachis glabrata Benth, RP) cultivars across two growing seasons, April (Spring season) and October (Fall season). Soils' bacterial communities were targeted using 16S rRNA gene amplicon sequencing. Bacterial community diversity and taxonomic composition among rhizoma peanut cultivars were significantly affected by seasons, cultivars, and their interactions (p < 0.05). Alpha diversity, as estimated by the OTU richness and Simpson index, was around onefold decrease in October than in April across most of the RP cultivars, while the soils from Arblick and Latitude had around one time higher alpha diversity in both seasons compared with other cultivars. Beta diversity differed significantly in April (R = 0.073, p < 0.01) and October (R = 0.084, p < 0.01) across seven cultivars. Bacterial dominant taxa (at phylum and genus level) were strongly affected by seasons and varied towards more dominant groups that have functional potentials involved in nutrient cycling from April to October. A large shift in water availability induced by season variations in addition to host cultivar's effects can explain the observed patterns in diversity, composition, and co-occurrence of bacterial taxa. Overall, our results demonstrate an overriding effect of short-term seasonal variations on soil bacterial communities associated with different crop cultivars. The findings suggest that season-induced shifts in environmental conditions could exert stronger impacts on soil microorganisms than the finer-scale rhizosphere effect from crop cultivars, and consequently influence largely microbe-mediated soil processes and crop health in agricultural ecosystems.

Deep learning for signal clock and exposure estimation in rolling shutter optical camera communication.

In rolling shutter (RS)-based optical camera communication (OCC) links, selecting the appropriate camera's exposure time is critical, as it limits the reception bandwidth. In long exposures, the pixels accumulate over time the incoming irradiance of several consecutive symbols. As a result, a harmful intersymbol interference corrupts the received signal. Consequently, reducing the exposure time is required to increase the reception bandwidth at the cost of producing dark images with impracticable light conditions for human or machine-supervised applications. Alternatively, deep learning (DL) equalizers can be trained to mitigate the exposure-related ISI. These equalizers must be trained considering the transmitter clock and the camera's exposure, which can be exceptionally challenging if those parameters are unknown in advance (e.g., if the camera does not reveal its internal settings). In those cases, the receiver must estimate those parameters directly from the images, which are severely distorted by the exposure time. This work proposes a DL estimator for this purpose, which is trained using synthetic images generated for thousands of representative cases. This estimator enables the receiver operation under multiple possible configurations, regardless of the camera used. The results obtained during the validation, using more than 7000 real images, registered relative errors lower than 1% and 2% when estimating the transmitter clock and the exposure time, respectively. The obtained errors guarantee the optimal performance of the following equalization and decoding receiver stages, keeping bit error rates below the forward error correction limit. This estimator is a central component of any OCC receiver that operates over moderate exposure conditions. It decouples the reception routines from the cameras used, ultimately enabling cloud-based receiver architectures.

General framework for calculating irradiance distributions of symmetric surface sources.

Symmetries in system modeling can be exploited to obtain analytical results on the system behavior and to speed up computations using the symmetric model. This work explores the use of symmetries in radiant surfaces for calculating the induced irradiance distributions by developing a general mathematical expression. The obtained model is applied to flat, cylindrical, and spherical sources to obtain explicit expressions. An experimental evaluation of the flat source is carried out and compared with a traditional point source, and the obtained procedure for the flat scenario is compared with the direct integration approach, which shows an improvement in the computation time of at least two orders of magnitude with a relative root mean square error of less than 10%. The results show that the proposed approach enhances short-range predictions for extended sources. To demonstrate the impact of this in optical wireless communications we have outlined a few applications.

Clustering-based data detection for spectral signature multiplexing in multispectral camera communication.

Optical camera communication (OCC) is a promising technology to be used in future wireless communication systems. In this work, a cluster-based data detection procedure is applied to enhance the performance of an OCC system. A multispectral camera is employed to capture the spectral variations in light-emitting diodes (LEDs) caused by temperature. This strategy's system performance is compared with a system that uses traditional linear methods, such as zero-forcing (ZF) and minimum mean square error (MMSE) equalizers. The findings of this study indicate that an improvement in the bit error rate (BER) can be achieved by applying a clustering approach.

Convolutional autoencoder for exposure effects equalization and noise mitigation in optical camera communication.

In rolling shutter-based optical camera communication (OCC), the camera's exposure time limits the achievable reception bandwidth. In long-exposure settings, the image sensor pixels average the incident received power, producing inter-symbol interference (ISI), which is perceived in the images as a spatial mixture of the symbol bands. Hence, the shortest possible exposure configuration should be selected to alleviate ISI. However, in these conditions, the camera produces dark images with impracticable light conditions for human or machine-supervised applications. In this paper, a novel convolutional autoencoder-based equalizer is proposed to alleviate exposure-related ISI and noise. Furthermore, unlike other systems that use artificial neural networks for equalization and decoding, the training procedure is conducted offline using synthetic images for which no prior information about the deployment scenario is used. Hence the training can be performed for a wide range of cameras and signal-to-noise ratio (SNR) conditions, using a vast number of samples, improving the network fitting and the system decoding robustness. The results obtained in the experimental validation record the highest ISI mitigation potential for Manchester encoded on-off keying signals. The system can mitigate the ISI produced by exposure time windows that are up to seven times longer than the transmission symbol duration, with bit error rates (BER) lower than 10-5 under optimal SNR conditions. Consequently, the reception bandwidth improves up to 14 times compared to non-equalized systems. In addition, under harsh SNRs conditions, the system achieves BERs below the forward error correction limit for 1dB and 5 dB while operating with exposure times that are 2 and 4 times greater than the symbol time, respectively.

Sandstorm effect on experimental optical camera communication.

Sandstorms can severely affect the reliability of outdoor optical wireless communications (OWC) by diminishing large regions' visibility. In this work, the effect of a real sandstorm on optical camera communications (OCC) links is experimentally evaluated. Two link ranges are essayed using a cost-efficient telescope-based camera setup with commercial LEDs. Using on-off keying modulation, a data rate of 1035 and 630 bps with error probabilities of 9.14⋅10-5 and 4.1⋅10-3 for 100 m and 200 m, respectively, can be achieved. The signal-to-noise ratio of the links was optimized by tuning the analog amplifier's gain of the camera, increasing it by up to 9 dB. It is shown that scattering due to the sandstorm can even be beneficial for increasing the data rate in OCC (contrary to classical photodetector-based OWC links), thanks to an increment of 33% on the region of interest dimensions compared to the expected clear air link.

Survey on Optical Wireless Communications-Based Services Applied to the Tourism Industry: Potentials and Challenges.

In this paper, we explore the potential applications of Optical Wireless Communications in the tourism industry, considering both indoor and outdoor scenarios and different transmission speeds. They range from high-speed atmospheric outdoor links (Free-Space Optics (FSO)) to indoor systems based on high-speed lighting networks (known under the trade name LiFi©) or low-speed services support the Internet of Things networks, using visible light (VLC) or IR emitters, with receivers based on either on classical photodiodes or in image sensors, known as Optical Camera Communications. The avant-garde applications of this technology have been studied focusing on three possible use scenarios: the traveler himself, in what we have called TAN (Tourist Area Network); the tourist facility, which includes not only the hotel but also leisure areas (theme parks, museums, natural protected areas) or services (restaurants, shopping areas, etc.); and the entire destination, which can be both the city or the territory where the tourist is received, within the paradigm of the Smart Tourist Destination (STD). In addition to the classic services based on radio frequency and wired broadband networks, these technologies will make it possible to meet the tourist's challenging needs, the establishment, and the destination. Besides, they cover the services imposed by the new marketing services related to location or context and feed the big data systems used to study tourist behavior.

Wireless Sensor Networks Using Sub-Pixel Optical Camera Communications: Advances in Experimental Channel Evaluation.

Optical wireless communications in outdoor scenarios are challenged by uncontrollable atmospheric conditions that impair the channel quality. In this paper, different optical camera communications (OCC) equipment are experimentally studied in the laboratory and the field, and a sub-pixel architecture is raised as a potential solution for outdoor wireless sensor networks (WSN) applications, considering its achievable data throughput, the spatial division of sources, and the ability of cameras to overcome the attenuation caused by different atmospheric conditions such as rain, turbulence and the presence of aerosols. Sub-pixel OCC shows particularly adequate capabilities for some of the WSN applications presented, also in terms of cost-effectiveness and scalability. The novel topology of sub-pixel projection of multiple transmitters over the receiver using small optical devices is presented as a solution using OCC that re-uses camera equipment for communication purposes on top of video-monitoring.

Optical Camera Communication as an Enabling Technology for Microalgae Cultivation.

Optical Camera Communication (OCC) systems have a potential application in microalgae production plants. In this work, a proof-of-concept prototype consisting of an artificial lighting photobioreactor is proposed. This reactor optimises the culture's photosynthetic efficiency while transmitting on-off keying signals to a rolling-shutter camera. Upon reception, both signal decoding and biomass concentration sensing are performed simultaneously using image processing techniques. Moreover, the communication channel's theoretical modelling, the data rate system's performance, and the plant distribution requirements and restrictions for a production-scale facility are detailed. A case study is conducted to classify three different node arrangements in a real facility, considering node visibility, channel capacity, and space exploitation. Finally, several experiments comprising radiance evaluation and Signal-to-Noise Ratio (SNR) computation are performed at different angles of view in both indoor and outdoor environments. It is observed that the Lambertian-like emission patterns are affected by increasing concentrations, reducing the effective emission angles. Furthermore, significant differences in the SNR, up to 20 dB, perceived along the illuminated surface (centre versus border), gradually reduce as light is affected by greater dispersion. The experimental analysis in terms of scattering and selective wavelength attenuation for green (Arthrospira platensis) and brown (Rhodosorus marinus) microalgae species determines that the selected strain must be considered in the development of this system.

VLC Network Design for High Mobility Users in Urban Tunnels.

Current vehicular systems require real-time information to keep drivers safer and more secure on the road. In addition to the radio frequency (RF) based communication technologies, Visible Light Communication (VLC) has emerged as a complementary way to enable wireless access in intelligent transportation systems (ITS) with a simple design and low-cost deployment. However, integrating VLC in vehicular networks poses some fundamental challenges. In particular, the limited coverage range of the VLC access points and the high speed of vehicles create time-limited links that the existing handover procedures of VLC networks can not be accomplished timely. Therefore, this paper addresses the problem of designing a vehicular VLC network that supports high mobility users. We first modify the traditional VLC network topology to increase uplink reliability. Then, a low-latency handover scheme is proposed to enable mobility in a VLC network. Furthermore, we validate the functionality of the proposed VLC network design method by using system-level simulations of a vehicular tunnel scenario. The analysis and the results show that the proposed method provides a steady connection, where the vehicular node is available more than 99% of the time regardless of the number of vehicular nodes on this network. Additionally, the system is able to achieve a Frame-Error-Rate (FER) performance lower than 10-3.

Design and Experimental Characterization of a Discovery and Tracking System for Optical Camera Communications.

Visible light communications (VLC) technology is emerging as a candidate to meet the demand for interconnected devices' communications. However, the costs of incorporating specific hardware into end-user devices slow down its market entry. Optical camera communication (OCC) technology paves the way by reusing cameras as receivers. These systems have generally been evaluated under static conditions, in which transmitting sources are recognized using computationally expensive discovery algorithms. In vehicle-to-vehicle networks and wearable devices, tracking algorithms, as proposed in this work, allow one to reduce the time required to locate a moving source and hence the latency of these systems, increasing the data rate by up to 2100%. The proposed receiver architecture combines discovery and tracking algorithms that analyze spatial features of a custom RGB LED transmitter matrix, highlighted in the scene by varying the cameras' exposure time. By using an anchor LED and changing the intensity of the green LED, the receiver can track the light source with a slow temporal deterioration. Moreover, data bits sent over the red and blue channels do not significantly affect detection, hence transmission occurs uninterrupted. Finally, a novel experimental methodology to evaluate the evolution of the detection's performance is proposed. With the analysis of the mean and standard deviation of novel K parameters, it is possible to evaluate the detected region-of-interest scale and centrality against the transmitter source's ideal location.

Effect of moving microalgae on underwater wireless optical links.

Underwater wireless optical communications is a promising technique for addressing short-range data networks, as it provides cost, performance, and complexity improvements as compared with other alternatives, such as acoustic communications or radio frequency links. It is a part of the optical wireless communications research area, since for these applications, broad optical sources such as visible LED lamps can be used. Unless those links are designed for short distances (about 1 m, as in data-muling services on internet-of-things submerged systems), they are still severely affected by channel perturbations, such as scattering due to the presence of particles. This effect is particularly important when considering sensing applications for algae or aquaculture farming, which are becoming a crucial economic resource in many maritime areas. In this work, the effects of moving microalgae on underwater short-range optical links are studied so as to estimate a model for this scattering under dynamic conditions. The statistical parameters over experimentally measured received signal level and signal-to-noise ratio (SNR) are calculated, and the experimental setup is described. Results show that in clear water (no-algae scenario), the water-pump-induced movement effect over the mean and variance of the received optical power can be neglected, while when microalgae are present, the average optical power value decreases and the variance increases with all measured wavelengths. Finally, the SNR penalty due to the movement of microalgae is statistically evaluated.

Characterization and Performance of a Thermal Camera Communication System.

This work presents a novel communications technology named Thermal Camera Communication (TCC), which is analogous to Optical Camera Communication (OCC). Thermographic cameras and Peltier cells are proposed as receiver and transmitter, respectively, changing completely their usual field of application. Furthermore, a comprehensive characterization of the Peltier-Thermal camera pair is carried out, presenting their bandwidth, achievable data rate under On-Off-Keying (OOK) modulation, noise characteristics, and energy efficiency. A comparison against the current state-of-the-art OCC technology is also provided, showing that TCC is a promising technology suitable for sensor networks. The thorough analysis of TCC performed in this work shows that commercial Peltier cells can be re-thought under a communications viewpoint in order to improve their performance. This novel communication technology can be applied in environments such as the access to public transportation or buildings due to the new health emergency situation. The use of thermographic cameras will become massive and dual measurement and communication purposes could be considered for applications such as sensor networks, using a yet unexploited wavelength range.

MAC/PHY Comprehensive Visible Light Communication Networks Simulation.

In this paper, the effect of channel conditions on the global behavior of a wireless Visible Light Communications (VLC) optical network are studied. It presents a system-level simulator that considers jointly a channel propagation model and the MAC mechanisms to have a realistic description of the network, even in situations where the emitted signal is heavily affected by reflections in any close surface or obstacle. The resulting platform also accurately evaluates both Line-Of-Sight (LOS) and Non-LOS (NLOS) contributions on each node and enables the effective use of Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) schemes as defined by IEEE 802.15.7r1 standard, as well as allows a correct evaluation of lifelike problems such as the effect of hidden nodes. This work shows the necessity of accurately modeling VLC MAC layer performances, taking also into account the physical nature of visible light propagation in indoor scenarios.

Hybrid RF/VLC Network Architecture for the Internet of Things.

In recent years, there has been a remarkable advance in monitoring technologies in many environments, be they urban or rural. These technologies, included in the Internet of Things (IoT) domain, allow remote control and acquisition of data from sensors for their subsequence analysis. All these systems are based on the interaction between sensors and actuators. To achieve this goal, it is necessary to provide a very high level of connectivity between the devices, especially as far as wireless systems are concerned. In this sense, there is a great variety of standards in the market of communication networks oriented to this end. One of the biggest challenges today is to allow inter-operability between these different technologies in order to homogenize this field. In addition to this, it is intended to introduce new communication techniques that can provide certain additional advantages to those already existing. The main idea is the creation of a cellular network where radiofrequency and optical technologies coexist, and whose link with the rest of the world is through long-range and low-consumption wireless technologies. The center of each cell, that is the lighting system, can be powered using solar panels, as can the existing systems in the market. The objective is that these panels are capable of providing the necessary energy to the rest of the necessary systems.

Correlation-based receiver for optical camera communications.

In color-multiplexed optical camera communications (OCC) systems, data acquisition is restricted by the image processing algorithm capability for fast source recognition, region-of-interest (ROI) detection and tracking, packet synchronization within ROI, estimation of inter-channel interference and threshold computation. In this work, a novel modulation scheme for a practical RGB-LED-based OCC system is presented. The four above-described tasks are held simultaneously. Using confined spatial correlation of well-defined reference signals within the frame's color channels is possible to obtain a fully operating link with low computational complexity algorithms. Prior channel adaptation also grants a substantial increase in the attainable data rate, making the system more robust to interferences.