First derivative synchronous spectrofluorimetric method for the simultaneous determination of tramadol and celecoxib in their dosage forms and human plasma.

One of the most common features of many different clinical conditions is pain; hence, there is a crucial need for eliminating or reducing it to a tolerable level to retrieve physical, psychological and social functioning. A first derivative synchronous spectrofluorimetry technique is proposed for the simultaneous determination of celecoxib and tramadol HCl, a recent coformulation authorized for treating acute pain in adults. The method includes using synchronous spectrofluorimetry at ∆λ = 80 nm where tramadol HCl was determined using first derivative technique at λ = 230.2 nm, while celecoxib was determined at λ = 288.24 nm. The proposed method was successfully applied to their co-formulated dosage forms in addition to spiked human plasma and validated in agreement with the guidelines of the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use (ICH). The linear ranges were found to be 0.50-5.0 and 0.15-0.50, the limits of detection to be 0.088 and 0.011 and the limits of quantification to be 0.266 and 0.032 µg/ml for celecoxib and tramadol, respectively. Statistical analysis revealed no significant difference when compared with previously reported methods as evidenced by the values of the variance ratio F-test and Student t-test. The proposed method was successfully applied to commercial dosage forms and spiked human samples. Moreover, the greenness of the proposed method was investigated based on the analytical eco-scale approach, with the results showing an excellent green scale with a score of 95.

Highly fluorescent nitrogen-doped carbon quantum dots prepared using sucrose and urea: Green synthesis, characterization, and use for determination of torsemide in its tablets and plasma samples.

A simple and facile microwave-assisted method was developed for the synthesis of highly fluorescent nitrogen-doped carbon quantum dots (N-CQDs) using sucrose and urea. The produced quantum dots exhibited a strong emission band at 376 nm after excitation at 216 nm with quantum yield of 0.57. The as-prepared N-CQDs were characterized using Fourier-transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM) images, and ultraviolet-visible (UV-visible) spectra. The average particle size was 7.7 nm. It was found that torsemide (TRS) caused an obvious quenching of the fluorescent N-CQDs; so, they were used for its spectrofluorometric estimation. An excellent linear correlation was found between the fluorescence quenching of N-CQDs and the concentration of the drug in the range of 0.10 to 1.0 µg/mL with limit of quantitation (LOQ) of 0.08 µg/mL and limit of detection (LOD) of 0.027 µg/mL. The method was successfully applied for the assay of the drug in its commercial tablets and spiked human plasma samples, and the results obtained were satisfactory. Complex GAPI was used for greenness assessment of the analytical procedures and the pre-analysis steps. Interference likely to be introduced from co-administered drugs was also studied.

Estimation of Two Diuretics Using Fluorescent Nitrogen Doped Carbon Quantum Dots: Application to Spiked Human Plasma and Tablets.

Highly fluorescent nitrogen doped carbon quantum dots (N-CQDs) were prepared by a single-step method based on microwave heating of cane sugar and urea. The produced N-CQDs were applied as nano-sensors for the spectrofluorimetric determination of eplerenone and spironolactone. A strong emission band at 376 nm was obtained after excitation at 216 nm due to the produced N-CQDs. The native fluorescence of N-CQDs was obviously quenched upon adding increased concentrations of each drug. A strong correlation was found between the fluorescence quenching of N-CQDs and the concentration of each drug. The method was found to be linear over the range of 0.5 to 5.0 µg/mL for eplerenone and 0.5 to 6.0 µg/mL for spironolactone with LOQ of 0.383 µg/mL and 0.262 µg/mL. The developed method was further extended for determination of both drugs in their pharmaceutical tablets and spiked human plasma. The results obtained were statistically compared with those of reported methods. The mechanism of fluorescence quenching of N-CQDs by the two drugs was discussed.

Greenness-by-design approach for developing novel UV spectrophotometric methodologies resolving a quaternary overlapping mixture.

Greenness-by-design (GbD) is an approach that integrates green chemistry principles into the method development stage of analytical processes, aiming to reduce their environmental impact. In this work, we applied GbD to a novel univariate double divisor corrected amplitude (DDCA) method that can resolve a quaternary pharmaceutical mixture in a fixed-dose polypill product. We also used a genetic algorithm as a chemometric modeling technique to select the informative variables for the analysis of the overlapping mixture. This resulted in more accurate and efficient predictive models. We used a computational approach to study the effect of solvents on the spectral resolution of the mixture and to minimize the spectral interferences caused by the solvent, thus achieving spectral resolution with minimal analytical effort and ecological footprint. The validated methods showed wide linear concentration ranges for the four components (1-30 µg/mL for losartan, 2.5-30 µg/mL for atorvastatin and aspirin, and 2.5-35 µg/mL for atenolol) and achieved high scores on the hexagon and spider charts, demonstrating their eco-friendliness.

GC-MS/MS Quantification of EGFR Inhibitors, ß-Sitosterol, Betulinic Acid, (+) Eriodictyol, (+) Epipinoresinol, and Secoisolariciresinol, in Crude Extract and Ethyl Acetate Fraction of Thonningia sanguinea.

Medicinal plants are widely used in folk medicine to treat various diseases. Thonningia sanguinea Vahl is widespread in African traditional medicine, and exhibits antioxidant, antibacterial, antiviral, and anticancer activities. T. sanguinea is a source of phytomedicinal agents that have previously been isolated and structurally elucidated. Herein, gas chromatography combined with tandem mass spectrometry (GC-MS/MS) was used to quantify epipinoresinol, ß-sitosterol, eriodictyol, betulinic acid, and secoisolariciresinol contents in the methanolic crude extract and its ethyl acetate fraction for the first time. The ethyl acetate fraction was rich in epipinoresinol, eriodictyol, and secoisolariciresinol at concentrations of 2.3, 3.9, and 2.4 mg/g of dry extract, respectively. The binding interactions of these compounds with the epidermal growth factor receptor (EGFR) were computed using a molecular docking study. The results revealed that the highest binding affinities for the EGFR signaling pathway were attributed to eriodictyol and secoisolariciresinol, with good binding energies of -19.93 and -16.63 Kcal/mol, respectively. These compounds formed good interactions with the key amino acid Met 769 as the co-crystallized ligand. So, the ethyl acetate fraction of T. sanguinea is a promising adjuvant therapy in cancer treatments.

Analysis of Terpenes in Cannabis sativa L. Using GC/MS: Method Development, Validation, and Application.

Terpenes are the major components of the essential oils present in various Cannabis sativa L. varieties. These compounds are responsible for the distinctive aromas and flavors. Besides the quantification of the cannabinoids, determination of the terpenes in C. sativa strains could be of importance for the plant selection process. At the University of Mississippi, a GC-MS method has been developed and validated for the quantification of terpenes in cannabis plant material, viz., α-pinene, ß-pinene, ß-myrcene, limonene, terpinolene, linalool, α-terpineol, ß-caryophyllene, α-humulene, and caryophyllene oxide. The method was optimized and fully validated according to AOAC (Association of Official Analytical Chemists) guidelines against reference standards of selected terpenes. Samples were prepared by extraction of the plant material with ethyl acetate containing n-tridecane solution (100 µg/mL) as the internal standard. The concentration-response relationship for all analyzed terpenes using the developed method was linear with r2 values > 0.99. The average recoveries for all terpenes in spiked indoor cultivated samples were between 95.0 - 105.7%, with the exception of terpinolene (67 - 70%). The measured repeatability and intermediate precisions (% relative standard deviation) in all varieties ranged from 0.32 to 8.47%. The limit of detection and limit of quantitation for all targeted terpenes were determined to be 0.25 and 0.75 µg/mL, respectively. The proposed method is highly selective, reliable, and accurate and has been applied to the simultaneous determination of these major terpenes in the C. sativa biomass produced by our facility at the University of Mississippi as well as in confiscated marijuana samples.

Determination of Acid and Neutral Cannabinoids in Extracts of Different Strains of Cannabis sativa Using GC-FID.

Cannabis (Cannabis sativa L.) is an annual herbaceous plant that belongs to the family Cannabaceae. Trans-Δ9-tetrahydrocannabinol (Δ9-THC) and cannabidiol (CBD) are the two major phytocannabinoids accounting for over 40% of the cannabis plant extracts, depending on the variety. At the University of Mississippi, different strains of C. sativa, with different concentration ratios of CBD and Δ9-THC, have been tissue cultured via micropropagation and cultivated. A GC-FID method has been developed and validated for the qualitative and quantitative analysis of acid and neutral cannabinoids in C. sativa extracts. The method involves trimethyl silyl derivatization of the extracts. These cannabinoids include tetrahydrocannabivarian, CBD, cannabichromene, trans-Δ8-tetrahydrocannabinol, Δ9-THC, cannabigerol, cannabinol, cannabidiolic acid, cannabigerolic acid, and Δ9-tetrahydrocannabinolic acid-A. The concentration-response relationship of the method indicated a linear relationship between the concentration and peak area ratio with R2 > 0.999 for all 10 cannabinoids. The precision and accuracy of the method were found to be ≤ 15% and ± 5%, respectively. The limit of detection range was 0.11 - 0.19 µg/mL, and the limit of quantitation was 0.34 - 0.56 µg/mL for all 10 cannabinoids. The developed method is simple, sensitive, reproducible, and suitable for the detection and quantitation of acidic and neutral cannabinoids in different extracts of cannabis varieties. The method was applied to the analysis of these cannabinoids in different parts of the micropropagated cannabis plants (buds, leaves, roots, and stems).

Comparison between Two Linear Supervised Learning Machines' Methods with Principle Component Based Methods for the Spectrofluorimetric Determination of Agomelatine and Its Degradants.

Four accurate, sensitive and reliable stability indicating chemometric methods were developed for the quantitative determination of Agomelatine (AGM) whether in pure form or in pharmaceutical formulations. Two supervised learning machines' methods; linear artificial neural networks (PC-linANN) preceded by principle component analysis and linear support vector regression (linSVR), were compared with two principle component based methods; principle component regression (PCR) as well as partial least squares (PLS) for the spectrofluorimetric determination of AGM and its degradants. The results showed the benefits behind using linear learning machines' methods and the inherent merits of their algorithms in handling overlapped noisy spectral data especially during the challenging determination of AGM alkaline and acidic degradants (DG1 and DG2). Relative mean squared error of prediction (RMSEP) for the proposed models in the determination of AGM were 1.68, 1.72, 0.68 and 0.22 for PCR, PLS, SVR and PC-linANN; respectively. The results showed the superiority of supervised learning machines' methods over principle component based methods. Besides, the results suggested that linANN is the method of choice for determination of components in low amounts with similar overlapped spectra and narrow linearity range. Comparison between the proposed chemometric models and a reported HPLC method revealed the comparable performance and quantification power of the proposed models.

Optimization of a Solid-Phase Extraction Coupled with a High-Performance Liquid Chromatography and Diode Array Ultraviolet Detection Method for Monitoring of Different Antibiotic Class Residues in Water Samples.

BACKGROUND: The increased use of cephalosporin antibiotics in the last few years as well as the detection of their residues in wastewater treatment plants and hospital wastewater poses a risk for infiltration of their residues into environmental water samples. OBJECTIVE: A simplified, sensitive, and convenient solid-phase extraction (SPE) procedure coupled with either HPLC or fast HPLC methods with diode array detection was developed and validated to screen the residues of six different cephalosporin antibiotics: cefoperazone, cefipime, ceftazedime, ceftriaxone, cefdinir, and cefotaxime, along with amoxicillin, levofloxacin, and ciprofloxacin in water samples. METHODS: An HPLC-diode array detector (HPLC-DAD) method and a fast HPLC method, based on a core-shell stationary phase, were developed for the fast screening of the antibiotic compounds. In addition, the SPE step was optimized to enable the extraction of the studied drugs with high accuracy of the recovered amounts of residues. RESULTS: The method sensitivity was enhanced by the coupling of SPE with HPLC-DAD and fast HPLC to achieve low LODs; from 0.2 to 3.8 ng/mL and from 0.65 to 12.2 ng/mL, respectively. The developed methods were augmented by LC-MS/MS determination for confirmation of identity and quantity of any positively identified sample. The method was applied to the analysis of water samples collected from a rural site. In Addition, an example application of cleaning validation of cefotaxime-contaminated stainless-steel surfaces was provided. CONCLUSION: The method's simplicity and high sensitivity encourage its application in monitoring of antibiotic residues in different types of water samples such as environmental samples and samples from cleaning validation activities. HIGHLIGHTS: HPLC-DAD and fast HPLC methods were developed for separation of nine different antibiotics. The combination with the SPE procedure achieved low detection limits; from 0.2 to 3.8 ng/mL for SPE-HPLC-DAD and from 0.65 to 12.2 ng/mL for SPE-fast HPLC.

UPLC-PDA factorial design assisted method for simultaneous determination of oseltamivir, dexamethasone, and remdesivir in human plasma.

A green and simple UPLC method was developed and optimized, adopting a factorial design for simultaneous determination of oseltamivir phosphate and remdesivir with dexamethasone as a co-administered drug in human plasma and using daclatasvir dihydrochloride as an internal standard within 5 min. The separation was established on UPLC column BEH C18 1.7 µm (2.1 × 100.0 mm) connected to UPLC pre-column BEH 1.7 µm (2.1 × 5.0 mm) at 50 °C with an injection volume of 10 µL. The photodiode array detector (PDA) was set at three wavelengths of 220, 315, and 245 nm for oseltamivir phosphate, the internal standard, and both dexamethasone and remdesivir, respectively. The mobile phase consisted of methanol and ammonium acetate solution (40 mM) adjusted to pH 4 in a ratio of 61.5:38.5 (v/v) with a flow rate of 0.25 mL min-1. The calibration curves were linear over 500.0-5000.0 ng mL-1 for oseltamivir phosphate, over 10.0-500.0 ng mL-1 and 500.0-5000.0 ng mL-1 for dexamethasone, and over 20.0-500 ng mL-1 and 500.0-5000.0 ng mL-1 for remdesivir. The Gibbs free energy and Van't Hoff plots were used to investigate the effect of column oven temperatures on retention times. Fluoride-EDTA anticoagulant showed inhibition activity on the esterase enzyme in plasma. The proposed method was validated according to the M10 ICH, FDA, and EMA's bioanalytical guidelines. According to Eco-score, GAPI, and AGREE criteria, the proposed method was considered acceptable green.

Study of the binding interaction of salmon sperm DNA with nintedanib, a tyrosine kinase inhibitor using multi-spectroscopic, thermodynamic, and in silico approaches.

The study of the intermolecular binding interaction of small molecules with DNA can guide the rational drug design with greater efficacy and improved or more selective activity. In the current study, nintedanib's binding interaction with salmon sperm DNA (ssDNA) was thoroughly investigated using UV-vis spectrophotometry, spectrofluorimetry, ionic strength measurements, viscosity measurements, thermodynamics, molecular docking, and molecular dynamic simulation techniques under physiologically simulated conditions (pH 7.4). The obtained experimental results showed that nintedanib and ssDNA had an apparent binding interaction. Nintedanib's binding constant (Kb) with ssDNA, as determined using the Benesi-Hildebrand plot, was 7.9 × 104 M-1 at 298 K, indicating a moderate binding affinity. The primary binding contact forces were hydrophobic and hydrogen bonding interactions, as verified by the enthalpy and entropy changes (ΔH0 and ΔS0), which were - 16.25 kJ.mol-1 and 39.30 J mol-1 K-1, respectively. According to the results of UV-vis spectrophotometry, viscosity assays, and competitive binding interactions with ethidium bromide or rhodamine B, the binding mode of nintedanib to ssDNA was minor groove. Molecular docking and molecular dynamic simulation studies showed that nintedanib fitted into the B-DNA minor groove's AT-rich region with high stability. This study can contribute to further understanding of nintedanib's molecular mechanisms and pharmacological effects.

Kinetics investigation and determination of pipoxolan hydrochloride and its degradant using liquid chromatography.

An LC method was developed for the quantitative determination of pipoxolan hydrochloride (PPH) and its degradant. Forced degradation studies were performed on bulk sample using acid (1 M hydrochloric acid), alkaline (0.2 M sodium hydroxide), oxidation (0.33% hydrogen peroxide), heat (70 degrees C), and photolytic degradation. The chromatographic method was fine-tuned using the samples generated from forced degradation studies. Good resolution between the peaks corresponding to the degradants and the analyte was achieved on a Discovery C18 LC column (25 cm x 4.6 mm id, 5 pm particle size). The mobile phase was methanol-10 mM sodium dihydrogen phosphate (60+40, v/v); pH was adjusted to 6.5 using 0.2 M sodium hydroxide. Quantitation was achieved with UV detection at 214 nm based on peak area. The proposed LC method was used to investigate the kinetics of acidic and alkaline degradation processes of PPH at different temperatures, and the apparent pseudo-first-order rate constant, half-life, and activation energy were calculated. The pH-rate profiles of degradation of PPH in Britton-Robinson buffer solutions within the pH range 2-12 were studied. The developed method was validated with respect to linearity, accuracy, precision, and robustness. Forced degradation studies proved the stability-indicating power of the method.

Spectrofluorometric determination of cinacalcet hydrochloride: greenness assessment and application to biological fluids andin-vitrodissolution testing.

A facile, simple, green and sensitive spectrofluorometric method was developed for determination of the calcimimetic drug cinacalcet hydrochloride. It is used for the treatment of hyperparathyroidism. The drug showed high native fluorescence intensity at 320 nm after excitation at 280 nm. The method was linear over the range of 5.0-400.0 ng ml-1with excellent correlation (R2= 0.9999). Limit of detection (LOD) and limit of quantitation (LOQ) values were 1.19 and 3.62 ng ml-1, respectively. The percentage recovery was found to be 100.42% ± 1.39 (n=8). The proposed method was successfully applied for determination of cinacalcet in spiked human plasma samples with % recoveries of (87.23 to 109.69%). Two recent greenness metrics (GAPI and Analytical Eco-Scale) were chosen to prove the eco-friendly nature of the method. Furthermore, the proposed method was successfully applied to dissolution study of commercial cinacalcet tablets. The interference likely to be introduced by some commonly co-administrated drugs such as metoprolol and itraconazole was studied; the tolerance limits were calculated.

Eco-friendly simultaneous multi-spectrophotometric estimation of the newly approved drug combination of celecoxib and tramadol hydrochloride tablets in its dosage form.

Food and Drug Administration (FDA) recently approved co-formulated celecoxib and tramadol for the treatment of acute pain in adults. Three spectrophotometric methods were efficiently applied to estimate the co-formulated Celecoxib and Tramadol in their tablets; second derivative 2D-spectrophotometry technique (method I), induced dual-wavelength technique (method II) and dual-wavelength resolution technique (method III). The proposed methods were successfully validated following the International Council for Harmonisation (ICH) guidelines and statistically assessed based on the correlation coefficients, relative standard deviations as well as detection and quantitation limits. The obtained results revealed non-significant differences compared to the reported results as revealed by the variance ratio F test and Student t test. Moreover, the applied techniques were further assessed concerning their greenness based on the analytical eco-scale method revealing an excellent green scale with a final score of 95. The proposed spectrophotometric techniques could be applied for the routine analysis and quality control of the studied drugs in their dosage form.

A UPLC- MS/MS Method to Quantify ß-Sitosterol and Ferulic Acid of Pygeum Africanum Extract in Bulk and Pharmaceutical Preparation.

This study uses a liquid chromatography-electrospray ionization-tandem mass spectrometry method to determine ß-Sitosterol and Ferulic acid in Pygeum africanum extract. Chromatographic separation of the two analytes was performed on an ACQUITY UPLC H-Class system coupled with Xevo TQD mass spectrometer and HSS T3 C18 column (2.1 X 50 mm, 1.8 µm). Mobile phase A consisted of an aqueous solution of 0.1% formic acid (v/v), and mobile phase B was 0.1% formic acid (v/v) in methanol pumped through a gradient elution mode. Mass spectrometer parameters were optimized using an electrospray ionization source in the positive and negative ionization modes. The quantification of the two analytes was performed using multiple reaction monitoring transitions. The method was fully validated per (FDA) guidelines regarding linearity, accuracy, precision, carryover and selectivity. The proposed method was applied successfully to determine the two investigated compounds in commercially available pharmaceutical products.

Development of UPLC method for simultaneous assay of some COVID-19 drugs utilizing novel instrumental standard addition and factorial design.

A green, rapid, and simple RP-UPLC method was developed and optimized by full factorial design for the simultaneous separation of oseltamivir phosphate, daclatasivir dihydrochloride, and remdesivir, with dexamethasone as a co-administered drug. The separation was established on a UPLC column BEH C18 1.7 µm (2.1 × 100.0 mm) connected with a UPLC pre-column BEH 1.7 µm (2.1 × 5.0 mm) at 25 °C with an injection volume of 10 µL. The detector (PDA) was set at 239 nm. The mobile phase consisted of methanol and ammonium acetate (8.1818 mM) in a ratio of 75.7: 24.3 (v/v). The flow rate was set at 0.048 mL min-1. The overall separation time was 9.5 min. The retention times of oseltamivir phosphate, dexamethasone, daclatasivir dihydrochloride, and remdesivir were 6.323 ± 0.145, 7.166 ± 0.036, 8.078 ± 0.124, and 8.572 ± 0.166 min (eight replicates), respectively. The proposed method demonstrated linearity in the ranges of 10.0-500.0 (ng mL-1) and 0.5-30.0 (µg mL-1) for oseltamivir phosphate, 50.0-5000.0 (ng mL-1) for dexamethasone, 25.0-1000.0 (ng mL-1) and 0.5-25.0 (µg mL-1) for daclatasvir dihydrochlorde, and 10.0-500.0 (ng mL-1) and 0.5-30.0 (µg mL-1) for remdesivir. The coefficients of determination (R2) were greater than 0.9999, with percentage recoveries greater than 99.5% for each drug. The limits of quantitation were 6.4, 1.8, 7.8, and 1.6 ng mL-1, and the limits of detection were 1.9, 0.5, 2.0, and 0.5 ng mL-1 for oseltamivir phosphate, dexamethasone, daclatasivir dihydrochloride, and remdesivir, respectively. The proposed method was highly precise, as indicated by the low percentage of relative standard deviation values of less than 1.2% for each drug. The average content and uniformity of dosage units in the studied drugs' dosage forms were determined. The average contents of oseltamivir phosphate, dexamethasone, daclatasivir dihydrochloride, and remdesivir were nearly 93%, 102%, 99%, and 95%, respectively, while the uniformity of dosage unit values were nearly 92%, 102%, 101%, and 97%. Two novel methods were established in this work. The first method was used to assess the stability of standard solutions. This novel method was based on the slope of regression equations. The second was to evaluate the excipient's interference using an innovative instrumental standard addition method. The novel instrumental standard addition method was performed using the UPLC instrument program. It was more accurate, sensitive, time-saving, economical, and eco-friendly than the classic standard addition method. The results showed that the proposed method can estimate the tested drugs' concentrations without interference from their dosage form excipients. According to the Eco-score (more than 75), the Green Analytical Procedure Index (GAPI), and the AGREE criteria (total score of 0.77), the suggested method was considered eco-friendly.

Green fluorometric strategy for simultaneous determination of the antihypertensive drug telmisartan (A tentative therapeutic for COVID-19) with Nebivolol in human plasma.

Telmisartan (TEL) and Nebivolol (NEB) are frequently co-formulated in a single dosage form that is frequently prescribed for the treatment of hypertension, moreover, telmisartan is currently proposed to be used to treat COVID19-induced lung inflammation. Green rapid, simple, and sensitive synchronous spectrofluorimetric techniques for simultaneous estimation of TEL and NEB in their co-formulated pharmaceutical preparations and human plasma were developed and validated. Synchronous fluorescence intensity at 335 nm was used for TEL determination (Method I). For the mixture, the first derivative synchronous peak amplitudes (D1) at 296.3 and 320.5 nm were used for simultaneous estimation of NEB and TEL, respectively (Method II). The calibration plots were rectilinear over the concentration ranges of 30-550 ng/mL, and 50-800 ng/mL for NEB and TEL, respectively. The high sensitivity of the developed methods allowed for their analysis in human plasma samples. NEB`s Quantum yield was estimated by applying the single-point method. The greenness of the proposed approaches was evaluated using the Eco-scale, National Environmental Method Index (NEMI), and Green Analytical Procedure Index (GAPI) methods.

Use of green fluorescent nano-sensors for the determination of furosemide in biological samples and pharmaceutical preparations.

BACKGROUND: Carbon quantum dots (CQDs) are new class of carbon nanoparticles. Recently, they have been widely used as fluorescent probes due to their easy accessibility, optical properties and chemical inertness. Many available precursors are used in the synthesis of carbon quantum dots. The electrical and optical properties of CQDs could be enhanced by doping hetero atoms such as nitrogen or sulfur into their structure. OBJECTIVE: The current work presents the synthesis and characterization of water-soluble nitrogen doped carbon quantum dots (N-CQDs) and their use as fluorescent nano-sensors for the spectrofluorimetric determination of furosemide in its pharmaceutical preparations and spiked human plasma. METHODS: A domestic microwave was used to prepare the N-CQDs by heating a solution of sucrose and urea till complete charring (about ten minutes). The produced N-CQDs exhibit a strong emission band at 376 nm after excitation at 216 nm. Furosemide caused a quantitative quenching in the fluorescence intensity of the produced N-CQDs. RESULTS: The proposed method was validated according to ICH Guidelines. The method was found to be linear over the range of 0.1-1.0 µg/mL with LOQ of 0.087 µg/ml. CONCLUSION: Ecofriendly nano fluorescent sensors (N-CQDs) were successfully synthesized. The size of N-CQDs was distributed in the range of 6.63 nm to 10.23 nm with an average of 8.2 nm. The produced N-CQDs were used as fluorescent probes for the estimation of furosemide in its pharmaceutical preparations as well as spiked human plasma samples.

Eco-Friendly UV-Spectrophotometric Methods Employing Magnetic Nano-Composite Polymer for the Extraction and Analysis of Sexual Boosters in Adulterated Food Products: Application of Computer-Aided Design.

BACKGROUND: Solid phase extraction (SPE) techniques, based on computationally designed magnetic-based multi-targeting molecular imprinted polymer (MT-MIP), combined with UV spectrophotometric approaches provide advantages in the examination of counterfeit samples. OBJECTIVE: The current work describes an innovative and sustainable methodology for the simultaneous determination of tadalafil (TAD) and dapoxetine hydrochloride (DAP) in aphrodisiac counterfeit products (honey and instant coffee) utilizing SPE exploiting MT-MIP. Additionally, an innovative UV spectrophotometric method capable of resolving TAD in its pharmaceutical binary mixtures with DAP was developed. A novel computational approach was implemented to tailor the synthesis and design of the MT-MIP particles. METHODS: We applied a newly developed UV spectrophotometric method which was based on a Fourier self-deconvolution (FSD) method coupled with the isoabsorptive point for determination of TAD and DAP in pharmaceutical dosage form. We also applied an SPE process based on MT-MIP designed particles, assisting in the analysis of both drugs in counterfeit food samples. The SPE process and the UV spectroscopic methodology were assessed regarding their greenness using the pioneering green analytical procedure index (GAPI), analytical greeness including sample preparation (AGREEprep) and AGREE tools. The synthesized MT-MIP particles were characterized by scanning electron microscopy and energy-dispersive x-ray spectroscopy. RESULTS: The suggested spectrophotometric methods revealed a wide linear concentration range of 2-50 µg/mL with lower LODs in the range of 0.604-0.994 µg/mL. Additionally, the suggested method demonstrated the utmost sensitivity and eco-friendliness for their target in its mixed dosage form and counterfeit food products. CONCLUSION: The SPE process and the developed analytical UV spectroscopic methodology were validated as per the ICH guidelines, and were found to be suitable for overseeing some counterfeiting activities in commercially available honey and instant coffee aphrodisiac products. HIGHLIGHTS: An SPE method based on MT-MIP magnetic-based polymer and a UV spectroscopic method were successfully developed for analysis of TAD and DAP in different matrices.

Quantitative Determination of Cannabis Terpenes Using Gas Chromatography-Flame Ionization Detector.

Background: Cannabis has a long history of being credited with centuries of healing powers for millennia. The cannabis plant is a rich source of cannabinoids and terpenes. Each cannabis chemovar exhibits a different flavor and aroma, which are determined by its terpene content. Methods: In this study, a gas chromatography-flame ionization detector method was developed and validated for the determination of the 10 major terpenes in the main three chemovars of Cannabis sativa L. with n-tridecane used as the internal standard following the standard addition method. The 10 major terpenes (monoterpenes and sesquiterpenes) are α-pinene, ß-pinene, ß-myrcene, limonene, terpinolene, linalool, α-terpineol, ß-caryophyllene, α-humulene, and caryophyllene oxide. The method was validated according to Association of Official Analytical Chemists guidelines. Spike recovery studies for all terpenes were carried out on placebo cannabis material and indoor-growing high THC chemovar with authentic standards. Results: The method was linear over the calibration range of 1-100 µg/mL with r2>0.99 for all terpenes. The limit of detection and limit of quantification were calculated to be 0.3 and 1.0 µg/mL, respectively, for all terpenes. The accuracy (%recovery) at all levels ranged from 89% to 104% and 90% to 111% for placebo and indoor-growing high THC chemovar, respectively. The repeatability and intermediate precision of the method were evaluated by the quantification of target terpenes in the three different C. sativa chemovars, resulting in acceptable relative standard deviations (less than 10%). Conclusions: The developed method is simple, sensitive, reproducible, and suitable for the detection and quantification of monoterpenes and sesquiterpenes in C. sativa biomass.