Green and sensitive detection of olopatadine in aqueous humor using a signal-on fluorimetric approach: GREEnness assessment.

Olopatadine (OLP) is widely utilized as an effective antihistaminic drug for alleviating ocular itching associated with allergic conjunctivitis. With its frequent usage in pharmacies, there arises a pressing need for a cost-effective, easily implementable, environmentally sustainable detection method with high sensitivity. This study presents a novel signal-on fluorimetric method for detecting OLP in both its pure form and aqueous humor. The proposed approach depends on enhancing the weak intrinsic fluorescence emission of OLP, achieving a remarkable increase of up to 680% compared to its intrinsic fluorescence. This enhancement is achieved by forming micelles around protonated OLP using an acetate buffer (pH 3.6) and incorporating a solution of sodium dodecyl sulfate (SDS) surfactant. A strong correlation (R = 0.9996) is observed between the concentration of OLP and fluorescence intensities ranging from 1.0 to 100.0 ng mL-1 with a limit of detection of 0.22 ng mL-1. This described method is successfully employed for quantifying OLP in both its powder form and pharmaceutical eye drops. Furthermore, it demonstrates robust performance in determining OLP in artificial aqueous humor with a percentage recovery of 99.05 ± 1.51, with minimal interference from matrix interferents. Moreover, the greenness of the described method was evaluated.

Zirconium-Directed Supramolecular Self-Assembly of Coenzyme A@GNCs with Enhanced Phosphorescence for Developing Ultrasensitive Tracer Probe of Dipicolinic Acid, a Biomarker of Bacterial Spores.

Luminescent gold nanoclusters (GNCs) are a class of attractive quantum-sized nanomaterials bridging the gap between organogold complexes and gold nanocrystals. They typically have a core-shell structure consisting of a Au(I)-organoligand shell-encapsulated few-atom Au(0) core. Their luminescent properties are greatly affected by their Au(I)-organoligand shell, which also supports the aggregation-induced emission (AIE) effect. However, so far, the luminescent Au nanoclusters encapsulated with the organoligands containing phosphoryl moiety have rarely been reported, not to mention their AIE. In this study, coenzyme A (CoA), an adenosine diphosphate (ADP) analogue that is composed of a bulky 5-phosphoribonucleotide adenosine moiety connected to a long branch of vitamin B5 (pantetheine) via a diphosphate ester linkage and ubiquitous in all living organisms, has been used to synthesize phosphorescent GNCs for the first time. Interestingly, the synthesized phosphorescent CoA@GNCs could be further induced to generate AIE via the PO32- and Zr4+ interactions, and the observed AIE was found to be highly specific to Zr4+ ions. In addition, the enhanced phosphorescent emission could be quickly turned down by dipicolinic acid (DPA), a universal and specific component and also a biomarker of bacterial spores. Therefore, a Zr4+-CoA@GNCs-based DPA biosensor for quick, facile, and highly sensitive detection of possible spore contamination has been developed, showing a linear concentration range from 0.5 to 20 µM with a limit of detection of 10 nM. This study has demonstrated a promising future for various organic molecules containing phosphoryl moiety for the preparation of AIE-active metal nanoclusters.

Correction: In situ synthesis of chiral AuNCs with aggregation-induced emission using glutathione and ceria precursor nanosheets for glutathione biosensing.

Correction for 'In situ synthesis of chiral AuNCs with aggregation-induced emission using glutathione and ceria precursor nanosheets for glutathione biosensing' by Mohamed Ibrahim Halawa et al., Analyst, 2022, https://doi.org/10.1039/d2an00939k.

In situ synthesis of chiral AuNCs with aggregation-induced emission using glutathione and ceria precursor nanosheets for glutathione biosensing.

In the present study, a mediator release test (MRT) strategy has been designed for the photoluminescent sensing of glutathione (GSH). On the basis of the redox reaction of GSH and cerium-based nanosheets (Ce(CO3)2 NSs), Ce3+ ions were released to act as a mediator for the photoluminescence emission of the Au-thiolate complexes through an aggregation-induced emission (AIE) process. Remarkably, AIE was also accompanied by high chirality for the in situ synthesis of AuNCs using Ce(CO3)2 NSs as a template and GSH as a releaser for oligomeric Au-thiolate complexes. Multiple characterization techniques, including high-resolution transmission electron microscopy (HRTEM), atomic force microscopy (AFM), selected-area electron diffraction (SAED), X-ray powder diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), were employed to check the structure and morphology of the Ce(CO3)2 NSs as well as the successful in situ fabrication of the AuNCs. Using this new MRT strategy, an eco-friendly, selective, biocompatible and label-free AIE probe was established for the sensitive sensing of GSH with a limit of detection (LOD) of 1.02 µM. Moreover, this switch-on luminescent nanoplatform of the conjugate probe of Au-thiolate/Ce-based NSs was successfully applied for the selective and reliable GSH detection in human serum samples.

Detection of ascorbic acid based on its quenching effect on luminol-artemisinin chemiluminescence.

We find that luminol can react with artemisinin (ART) to produce chemiluminescence (CL) in the absence of a catalyst and ascorbic acid (AA) can quench luminol-ART CL. Based on its efficient inhibition effect on luminol-ART CL, a new AA detection method is established. The calibration curve for the determination of AA is in the linear range of 5 × 10-7 M to 1 × 10-4 M with a detection limit of 50 nM, which is more sensitive than many other reported methods. This CL approach was utilized to detect AA in vitamin C tablets by applying the standard addition method, and the recoveries of 104.0%, 96.8% and 103.4% were obtained, respectively, at concentrations of 1 µM, 5 µM and 10 µM with a RSD value of less than 3.6%. This developed method for AA assay is distinguished by its fastness, reproducibility, easy operation and good selectivity.

Development of luminol-based chemiluminescence approach for ultrasensitive sensing of Hg(II) using povidone-I2 protected gold nanoparticles as an efficient coreactant.

In this work, we fabricated gold nanoparticles (AuNPs) capped with both polyvinyl pyrrolidone (PVP) and iodine (I2) to act as efficient chemiluminescent coreactants for luminol. AuNPs synthesis was based on the direct chemical reduction of Au3+ with NaBH4 in the presence of PVP-I2 complex. The successful synthesis of PVP-I2@AuNPs was confirmed with scanning electron microscopy (SEM) and UV-vis spectrophotometry. Chemiluminescence (CL) intensity of luminol was greatly enhanced, upon its chemical reaction with chemisorbed I2 on AuNPs surfaces owing to the excellent catalytic activity of AuNPs. The PVP-I2@AuNPs/luminol CL sensing system was successfully applied for determination of Hg2+ ions and the results displayed linearity in a wide range from 0.5 to 2000 nM and an ultrasensitive response to 1.0 nM Hg2+. The detection limit of Hg2+ ions was 0.1 nM, which was 100 times lower than the limit value (10 nM) defined by the U.S. Environmental Protection Agency in drinkable water. This ultrasensitive luminogenic system for Hg2+ detection also exhibited excellent selectivity among 13 types of metals, suggesting that the luminol/PVP-I2@AuNPs system is a promising sensor for real-time detection of Hg2+. Graphical abstract.

Silicotungstic acid as a highly efficient coreactant for luminol chemiluminescence for sensitive detection of uric acid.

Herein, we report luminol-silicotungstic acid (STA) chemiluminescence (CL) for the first time. The luminol-STA system resulted in remarkable CL enhancement (65 times) compared with the known classical luminol-H2O2 system because of the generation of the strong oxidizing agent tungsten trioxide from STA. Based on the quenching effect of uric acid, the new CL system is applied for the sensitive and selective assay of uric acid in its pure state (LOD 0.75 nM) and in real human urine with excellent recoveries in the range of 99.6-102.3%. Furthermore, this system permits the efficient detection of STA (LOD, 0.24 µM).

Highly sensitive and selective non-enzymatic glucose detection based on indigo carmine/hemin/H2O2 chemiluminescence.

A new chemiluminescence (CL) system, indigo carmine/glucose/hemin/H2O2, has been found and developed for non-enzymatic detection of indigo carmine (IC) and glucose. The CL response increases linearly with IC concentrations from 3.2 µM to 10 mM and glucose concentrations from 0.06 µM to 3.5 mM. The detection limits are 1.45 µM and 15.0 nM for IC and glucose, respectively. This method allows the determination of glucose in blood and urine after simple dilution. The recoveries for the determination of glucose are between 98.5% and 101.0% in blood and between 98.5% and 101.3% in urine. This method shows good sensitivity, selectivity, simplicity, and is low cost, suggesting its promising broad applications.

Recent advances in nanomaterial-based capillary electrophoresis.

This review gives a summary of applications of different nanomateials, such as gold nanoparticles (AuNPs), carbon-based nanoparticles, magnetic nanoparticles (MNPs), and nano-sized metal organic frameworks (MOFs), in electrophoretic separations. This review also emphasizes the recent works in which nanoparticles (NPs) are used as pseudostationary phase (PSP) or immobilized on the capillary surface for enhancement of separation in CE, CEC, and microchips electrophoresis.

Pyridoxal 5'-phosphate assay based on lucigenin chemiluminescence.

The authors describe the first chemiluminescence (CL) based method for determination of pyridoxal 5'-phosphate (PLP). PLP is found to generate intense CL with lucigenin higher than that of the conventional lucigenin-H2O2 system by a factor of about 9.0. This new finding is used to be in a detection method for PLP via flow injection analysis (FIA). Response is linear in the 50 nM to 200 µM PLP concentration range with a correlation coefficient of 0.998, and the detection limit (at an S/N of 3) is 6.9 nM. The assay is highly selective over various amino acids, vitamins, sugars, coenzymes and metal ions cofactors. It exhibits advantages over the commonly employed HPLC methods in that it is rapid, more economic, eco-friendly and high throughput FIA detection of PLP without the need for toxic derivatization reagents, organic solvents, and HPLC instrumentation. The method was successfully applied to the determination of PLP in (spiked) human blood samples with recoveries in the range from 96.2-101.6% with % RSD < 4.0. The new system is also employed to determine lucigenin in the linear range of 0.3 to 100.0 µM with a correlation coefficient of 0.994 and the limit of detection is 0.04 µM. Graphical abstract Schematic of the chemiluminescent assay for pyridoxal 5'-phosphate (PLP). Lucigenin-PLP demonstrates 9-fold stronger chemiluminescence intensity than the lucigenin-H2O2 system. The detection limit of PLP is 6.9 nM. The method can detect PLP in human serum with good recoveries.

Chemiluminescence of Lucigenin-Allantoin and Its Application for the Detection of Allantoin.

Allantoin has been reported as a promising biomarker for monitoring of oxidative stress in humans and widely utilized in a variety of topical pharmaceuticals and cosmetics. Currently, the detection of allantoin is achieved by using chromatographic coupled techniques, which needs sample pre-extraction, derivatization, complex matrixes, and expensive instrumentation. Herein we report both the intense chemiluminescence of allantoin with lucigenin and the chemiluminescent detection of allantoin for the first time. The lucigenin-allantoin system demonstrated chemiluminescence emission intensity 17 times higher than that of the classic lucigenin-hydrogen peroxide system. Based on this fascinating phenomenon, a novel chemiluminescence method has been developed for the sensitive and selective allantoin determination with the combination of flow injection analysis. This method shows a linear calibration curve in the range 0.1-3000 µM with a detection limit (3σ/s) of 0.03 µM. Moreover, it was successfully utilized for the determination of allantoin in human eye drop and real urine samples after simple dilution with water. It shows excellent recoveries in the range 94.0-101.7%, and each measurement takes a very short time. This method exhibits potential advantages in the form of simplicity, rapidity, sensitivity, selectivity, and low cost. Allantoin could be an effective candidate for constructing new chemiluminescence systems, and it may provide a broad range of sensing applications.

Visual and Plasmon Resonance Absorption Sensor for Adenosine Triphosphate Based on the High Affinity between Phosphate and Zr(IV).

Zr(IV) can form phosphate and Zr(IV) (-PO32--Zr4+-) complex owing to the high affinity between Zr(IV) with phosphate. Zr(IV) can induce the aggregation of gold nanoparticles (AuNPs), while adenosine triphosphate(ATP) can prevent Zr(IV)-induced aggregation of AuNPs. Herein, a visual and plasmon resonance absorption (PRA)sensor for ATP have been developed using AuNPs based on the high affinity between Zr(IV)with ATP. AuNPs get aggregated in the presence of certain concentrations of Zr(IV). After the addition of ATP, ATP reacts with Zr(IV) and prevents AuNPs from aggregation, enabling the detection of ATP. Because of the fast interaction of ATP with Zr(IV), ATP can be detected with a detection limit of 0.5 µM within 2 min by the naked eye. Moreover, ATP can be detected by the PRA technique with higher sensitivity. The A520nm/A650nm values in PRA spectra increase linearly with the concentrations of ATP from 0.1 µM to 15 µM (r = 0.9945) with a detection limit of 28 nM. The proposed visual and PRA sensor exhibit good selectivity against adenosine, adenosine monophosphate, guanosine triphosphate, cytidine triphosphate and uridine triphosphate. The recoveries for the analysis of ATP in synthetic samples range from 95.3% to 102.0%. Therefore, the proposed novel sensor for ATP is promising for real-time or on-site detection of ATP.

Nanoscale Luminescence Imaging/Detection of Single Particles: State-of-the-Art and Future Prospects.

Single-particle-level measurements, during the reaction, avoid averaging effects that are inherent limitations of conventional ensemble strategies. It allows revealing structure-activity relationships beyond averaged properties by considering crucial particle-selective descriptors including structure/morphology dynamics, intrinsic heterogeneity, and dynamic fluctuations in reactivity (kinetics, mechanisms). In recent years, numerous luminescence (optical) techniques such as chemiluminescence (CL), electrochemiluminescence (ECL), and fluorescence (FL) microscopies have been emerging as dominant tools to achieve such measurements, owing to their diversified spectroscopy principles, noninvasive nature, higher sensitivity, and sufficient spatiotemporal resolution. Correspondingly, state-of-the-art methodologies and tools are being used for probing (real-time, operando, in situ) diverse applications of single particles in sensing, medicine, and catalysis. Herein, we provide a concise and comprehensive perspective on luminescence-based detection and imaging of single particles by putting special emphasis on their basic principles, mechanistic pathways, advances, challenges, and key applications. This Perspective focuses on the development of emission intensities and imaging based individual particle detection. Moreover, several key examples in the areas of sensing, motion, catalysis, energy, materials, and emerging trends in related areas are documented. We finally conclude with the opportunities and remaining challenges to stimulate further developments in this field.

Generation of Chemical Space of Compounds for Prostate Cancer Treatment: Biological Activity Prediction, Clustering, and Visualization of Chemical Space.

Designing molecules for pharmaceutical purposes has been a significant focus for several decades. The pursuit of novel drugs is an arduous and financially demanding undertaking. Nevertheless, the integration of computer-assisted frameworks presents a swift avenue for designing and screening drug-like compounds. Within the context of this research, we introduce a comprehensive approach for the design and screening of compounds tailored to the treatment of prostate cancer. To forecast the biological activity of these compounds, we employed machine learning (ML) models. Additionally, an automated process involving the deconstruction and reconstruction of molecular building blocks leads to the generation of novel compounds. Subsequently, the ML models were utilized to predict the biological activity of the designed compounds, and the t-SNE method was employed to visualize the chemical space covered by the novel compounds. A meticulous selection process identified the most promising compounds, and their potential for synthesis was assessed, offering valuable guidance to experimental chemists in their investigative endeavors. Furthermore, fingerprint and heatmap analysis were conducted to evaluate the chemical similarity among the selected compounds. This multifaceted approach, encompassing predictive modeling, compound generation, visualization, and similarity assessment, underscores our commitment to refining the process of identifying potential candidates for further exploration in prostate cancer treatment.

Data mining and library generation to search electron-rich and electron-deficient building blocks for the designing of polymers for photoacoustic imaging.

Photoacoustic imaging is a good method for biological imaging, for this purpose, materials with strong near infrared (NIR) absorbance are required. In the present study, machine learning models are used to predict the light absorption behavior of polymers. Molecular descriptors are utilized to train a variety of machine learning models. Building blocks are searched from chemical databases, as well as new building blocks are designed using chemical library enumeration method. The Breaking Retrosynthetically Interesting Chemical Substructures (BRICS) method is employed for the creation of 10,000 novel polymers. These polymers are designed based on the input of searched and selected building blocks. To enhance the process, the optimal machine learning model is utilized to predict the UV/visible absorption maxima of the newly designed polymers. Concurrently, chemical similarity analysis is also performed on the selected polymers, and synthetic accessibility of selected polymers is calculated. In summary, the polymers are all easy to synthesize, increasing their potential for practical applications.

An ultrasensitive chemiluminescent biosensor for tracing glutathione in human serum using BSA@AuNCs as a peroxidase-mimetic nanozyme on a luminol/artesunate system.

In this work, a nanosensor chemiluminescent (CL) probe for sensing glutathione (GSH) was developed, for the first time, based on its inhibition of the intrinsic peroxidase-mimetic effect of BSA@AuNCs. The endoperoxide linkage of artesunate could be hydrolyzed by BSA@AuNCs resulting in the release of reactive oxygen species (ROS), and the consequent generation of strong CL emission. By virtue of the strong covalent interactions of -S⋯Au-, GSH could greatly suppress the peroxidase-mimetic effect of BSA@AuNCs, leading to a drastic CL quenching. The CL quenching efficiency increased proportionally to the logarithm of GSH concentration through the linearity range of 50.0-5000.0 nM with a limit of detection of 5.2 nM. This CL-based strategy for GSH tracing demonstrated the advantages of ultrasensitivity, high selectivity and simplicity. This strategy was successfully utilized to measure GSH levels in human serum with reasonable recovery results of 98.71%, 103.18%, and 101.68%, suggesting that this turn-off CL sensor is a promising candidate for GSH in biological and clinical samples.

Novel Synthesis of Thiolated Gold Nanoclusters Induced by Lanthanides for Ultrasensitive and Luminescent Detection of the Potential Anthrax Spores' Biomarker.

In this study, we reported a facile, one-pot, and "green" synthesis of glutathione-protected gold nanoclusters (GSH@AuNCs) initiated by samarium (Sm3+) lanthanides for the first time. Sm3+ lanthanides more efficiently induced the formation of GSH@AuNCs with significantly enhanced luminescence than other lanthanides or heavy metal ions (Cd2+, Pb2+) did. Using this strategy, a detection for Sm3+ was made with a linearity range of (10.0-100.0 µM) and a limit of detection (LOD) of 0.5 µM. The Sm3+-based GSH@AuNCs were characterized by eco-friendliness, photostability, and low-cost synthesis with low biological toxicity and had great potential in the application for biosensing and bioimaging. They were successfully employed in the detection of dipicolinic acid (DPA), a well-reported biomarker for sensing potential infection by strongly hazardous anthrax spores. A good linear response was obtained for DPA detection ranging from 1.0 to 120.0 µM with a low LOD of 0.1 µM, which was much lower (600 times) than the infectious dosage of anthrax spores (6 × 10-5 M). The detection was due to the strong binding affinity and strong chelation capability of DPA to Sm3+ lanthanides, which caused the dissociation of the aggregates with an obvious decrease or even a turning-off effect of their luminescence.

Turn-on fluorescent glutathione detection based on lucigenin and MnO2 nanosheets.

In this work, a glutathione (GSH) sensing nano-platform using lucigenin as a fluorescent probe in the presence of MnO2 nanosheets was reported for the first time. Unlike the earlier fluorescent detection systems based on MnO2 nanosheets, which depend on Förster resonance energy transfer (FRET) or the dynamic quenching effect (DQE), the mechanism of the quenching process of MnO2 nanosheets on lucigenin fluorescence was attributed mainly to a static quenching effect (SQE) with a minor contribution of the inner filter effect (IFE). A double exponential fluorescence decay of lucigenin was obtained in various MnO2 nanosheet concentrations as a result of their SQE and IFE. Based on this phenomenon and taking advantage of the redox reaction between GSH and MnO2 nanosheets, we have developed a switch-on sensitive fluorescent method for GSH via the recovery of the MnO2 nanosheet-quenched fluorescence of lucigenin. A good linearity range of 1.0-150.0 µM with a low limit of detection (S/N = 3) of 180.0 nM was achieved, revealing the higher sensitivity for GSH determination in comparison with the previously reported MnO2 nanosheet-based turn-on fluorescent methods. The developed fluorescent nano-platform exhibits excellent selectivity with successful application for GSH detection in human serum plasma, indicating its good practicability for GSH sensing in biological and clinical applications.

Development of luminol-N-hydroxyphthalimide chemiluminescence system for highly selective and sensitive detection of superoxide dismutase, uric acid and Co2.

N-hydroxyphthalimide (NHPI), a well known reagent in organic synthesis and biochemical applications, has been developed as a stable and efficient chemiluminescence coreactant for the first time. It reacts with luminol much faster than N-hydroxysuccinimide, eliminating the need of a prereaction coil used in N-hydroxysuccinimide system. Without using prereaction coil, the chemiluminescence peak intensities of luminol-NHPI system are about 102 and 26 times greater than that of luminol-N-hydroxysuccinimide system and classical luminol-hydrogen peroxide system, respectively. The luminol-NHPI system achieves the highly sensitive detection of luminol (LOD = 70pM) and NHPI (LOD = 910nM). Based on their excellent quenching efficiencies, superoxide dismutase and uric acid are sensitively detected with LODs of 3ng/mL and 10pM, respectively. Co2+ is also detected a LOD of 30pM by its remarkable enhancing effect. Noteworthily, our method is at least 4 orders of magnitude more sensitive than previously reported uric acid detection methods, and can detect uric acid in human urine and Co2+ in tap and lake water real samples with excellent recoveries in the range of 96.35-102.70%. This luminol-NHPI system can be an important candidate for biochemical, clinical and environmental analysis.

Sensitive detection of alkaline phosphatase by switching on gold nanoclusters fluorescence quenched by pyridoxal phosphate.

In this work, we designed highly sensitive and selective luminescent detection method for alkaline phosphatase using bovine serum albumin functionalized gold nanoclusters (BSA-AuNCs) as the nanosensor probe and pyridoxal phosphate as the substrate of alkaline phosphatase. We found that pyridoxal phosphate can quench the fluorescence of BSA-AuNCs and pyridoxal has little effect on the fluorescence of BSA-AuNCs. The proposed mechanism of fluorescence quenching by PLP was explored on the basis of data obtained from high-resolution transmission electron microscopy (HRTEM), dynamic light scattering (DLS), UV-vis spectrophotometry, fluorescence spectroscopy, fluorescence decay time measurements and circular dichroism (CD) spectroscopy. Alkaline phosphatase catalyzes the hydrolysis of pyridoxal phosphate to generate pyridoxal, restoring the fluorescence of BSA-AuNCs. Therefore, a recovery type approach has been developed for the sensitive detection of alkaline phosphatase in the range of 1.0-200.0U/L (R2 =0.995) with a detection limit of 0.05U/L. The proposed sensor exhibit excellent selectivity among various enzymes, such as glucose oxidase, lysozyme, trypsin, papain, and pepsin. The present switch-on fluorescence sensing strategy for alkaline phosphatase was successfully applied in human serum plasma with good recoveries (100.60-104.46%), revealing that this nanosensor probe is a promising tool for ALP detection.