Enantioselective synthesis of 4-aryl-3,4-dihydrocoumarins via N-heterocyclic carbene catalyzed ß-arylation/cyclization of α-bromoenals.

4-Aryl-3,4-dihydrocoumarins are one of the most important structural motifs. Herein, we disclose an enantioselective N-heterocyclic carbene catalyzed ß-arylation/cyclization of α-bromoenals with 3-aminophenols under mild conditions. The protocol allows for the rapid preparation of 4-aryl-3,4-dihydrocoumarins in acceptable yields with good enantioselectivities. The products of this reaction could be converted into chiral diarylpropanoic acid derivatives without erosion of the enantioselectivity.

Peripheral Amplification of Multi-Resonance Induced Thermally Activated Delayed Fluorescence for Highly Efficient OLEDs.

Multi-resonance induced by boron and nitrogen atoms in opposite resonance positions endows a thermally activated delayed fluorescence (MR-TADF) emitter with a strikingly small full width at half maximum of only 26 nm and excellent photoluminescence quantum yield of up to 97.48 %. The introduction of a carbazole unit in the para position of the B-substituted phenyl-ring can significantly boost up the resonance effect without compromising the color fidelity, subsequently enhancing the performances of the corresponding pure blue TADF-OLED, with an outstanding external quantum efficiency (EQE) up to 32.1 % and low efficiency roll-off, making it one of the best TADF-OLEDs in the blue region to date. Furthermore, utilizing this material as host for a yellow phosphorescent emitter, the device also shows a significantly reduced turn-on voltage of 3.2 V and an EQEmax of 22.2 %.

Design of carbazole-based platinum complexes with steric hindrance for efficient organic light-emitting diodes.

The construction of platinum complexes with high steric hindrance is expected to suppress triple-triplet annihilation and π-π stacking to achieve high-performance organic light-emitting diodes (OLEDs) with low efficiency roll-off. Herein, two large steric hindrance platinum complexes (N-CzPhPtacac and N-CzCF3PhPtacac) were prepared by taking advantage of steric hindrance between the phenyl group on carbazole and the functional group (phenyl and trifluoromethyl substituted phenyl) at the 3-position of a pyridine moiety. Due to the similar electron cloud distribution and gap difference between the HOMO and LUMO, the two complexes showed similar orange-red emission peaks at 590 and 596 nm with high PL quantum yields of 90% and 92% and short excited state lifetimes of 2.77 and 3.08 µs in doped films, respectively. Consequently, OLEDs based on N-CzPhPtacac and N-CzCF3PhPtacac showed maximum external quantum efficiency (EQEmax) values of 15.4% and 18.9%, respectively. Importantly, benefitting from the more stretched spatial configuration from the -CF3 effect, the corresponding OLED exhibited a lower efficiency roll-off, with an EQE of 18.1% at 1000 cd m-2.

Application of modern neuroimaging technology in the diagnosis and study of Alzheimer's disease.

Neurological abnormalities identified via neuroimaging are common in patients with Alzheimer's disease. However, it is not yet possible to easily detect these abnormalities using head computed tomography in the early stages of the disease. In this review, we evaluated the ways in which modern imaging techniques such as positron emission computed tomography, single photon emission tomography, magnetic resonance spectrum imaging, structural magnetic resonance imaging, magnetic resonance diffusion tensor imaging, magnetic resonance perfusion weighted imaging, magnetic resonance sensitive weighted imaging, and functional magnetic resonance imaging have revealed specific changes not only in brain structure, but also in brain function in Alzheimer's disease patients. The reviewed literature indicated that decreased fluorodeoxyglucose metabolism in the temporal and parietal lobes of Alzheimer's disease patients is frequently observed via positron emission computed tomography. Furthermore, patients with Alzheimer's disease often show a decreased N-acetylaspartic acid/creatine ratio and an increased myoinositol/creatine ratio revealed via magnetic resonance imaging. Atrophy of the entorhinal cortex, hippocampus, and posterior cingulate gyrus can be detected early using structural magnetic resonance imaging. Magnetic resonance sensitive weighted imaging can show small bleeds and abnormal iron metabolism. Task-related functional magnetic resonance imaging can display brain function activity through cerebral blood oxygenation. Resting functional magnetic resonance imaging can display the functional connection between brain neural networks. These are helpful for the differential diagnosis and experimental study of Alzheimer's disease, and are valuable for exploring the pathogenesis of Alzheimer's disease.

Multicolor Circularly Polarized Photoluminescence and Electroluminescence with 1,2-Diaminecyclohexane Enantiomers.

Development of simple chiral materials with tunable circularly polarized photoluminescence (CPPL) and circularly polarized electroluminescence (CPEL) for efficient circularly polarized organic light-emitting diodes (CP-OLEDs) is the key toward future 3D displays. In this study, four pairs of chiral 1,2-diaminocyclohexane-based fluorescence enantiomers were efficiently prepared with high yields (up to 92%) and enantiomeric excesses (ee >99%). By the introduction of N-methyl, carbazole, and diphenylamine-donating groups, these materials showed multicolor CPPL and CPEL from blue (420 nm) to red (610 nm) with good thermal and conformational stability. The multilayer CP-OLEDs based on these enantiomers show high external quantum efficiency of up to 5.5% with low-efficiency roll-off and microimage circularly polarized electroluminescence with a dissymmetry factor (gEL) of up to -1.4 × 10-3/+1.3 × 10-3. These results push forward the development of future multicolor circularly polarized electroluminescent materials.

Chiral iridium(iii) complexes with four-membered Ir-S-P-S chelating rings for high-performance circularly polarized OLEDs.

Two series of chiral cyclometalated iridium(iii) complexes based on sulfur atom containing enantiopure BINOL derivatives were rapidly synthesized, which are endowed with varied chiroptical properties. Moreover, the circularly polarized OLEDs using enantiomers show a maximum luminance of above 40 000 cd m-2 and an external quantum efficiency of 23.6% with low efficiency roll-off as well as obvious CPEL properties.

Chiral Octahydro-Binaphthol Compound-Based Thermally Activated Delayed Fluorescence Materials for Circularly Polarized Electroluminescence with Superior EQE of 32.6% and Extremely Low Efficiency Roll-Off.

Circularly polarized organic light-emitting diodes (CP-OLEDs) are particularly favorable for the direct generation of CP light, and they demonstrate a promising application in 3D display. However, up to now, such CP devices have suffered from low brightness, insufficient efficiency, and serious efficiency roll-off. In this study, a pair of octahydro-binaphthol (OBN)-based chiral emitting enantiomers, (R/S)-OBN-Cz, are developed by ingeniously merging a chiral source and a luminophore skeleton. These chirality-acceptor-donor (C-A-D)-type and rod-like compounds concurrently generate thermally activated delayed fluorescence with a small ΔEST of 0.037 eV, as well as a high photoluminescence quantum yield of 92% and intense circularly polarized photoluminescence with dissymmetry factors (|gPL |) of ≈2.0 × 10-3 in thin films. The CP-OLEDs based on (R/S)-OBN-Cz enantiomers not only display obvious circularly polarized electroluminescence signals with a |gEL | of ≈2.0 × 10-3 , but also exhibit superior efficiencies with maximum external quantum efficiency (EQEmax ) up to 32.6% and extremely low efficiency roll-off with an EQE of 30.6% at 5000 cd m-2 , which are the best performances among the reported CP devices to date.

Efficient green photoluminescence and electroluminescence of iridium complexes with high electron mobility.

Aiming to balance the injection and transport of electrons and holes, nitrogen heterocycle and 1,3,4-oxadiazole derivatives were introduced in iridium(iii) complexes to obtain organic light-emitting diodes (OLEDs) with high performances. Thus, two novel Ir(iii) complexes (Ir(tfmphpm)2(pop) and Ir(tfmppm)2(pop)) with green emissions using 2-(3,5-bis(trifluoromethyl)phenyl)pyrimidine (tfmphpm) and 2-(2,6-bis(trifluoromethyl)pyridin-4-yl)pyrimidine (tfmppm) as cyclometalating ligands, and 2-(5-phenyl-1,3,4-oxadiazol-2-yl)phenol (pop) as an ancillary ligand were synthesized. Both emitters show high photoluminescence efficiencies up to 94% and good electron mobility. The devices using two emitters with the structure of ITO (indium-tin-oxide)/MoO3 (molybdenum oxide, 5 nm)/TAPC (di-[4-(N,N-ditolyl-amino)-phenyl]cyclohexane, 30 nm)/mCP (1,3-bis(9H-carbazol-9-yl)benzene, 5 nm)/Ir(iii) complexes (6 wt%) : PPO21 (3-(diphenylphosphoryl)-9-(4-(diphenylphosphoryl)phenyl)-9H-carbazole, 10 nm)/TmPyPB (1,3,5-tri(m-pyrid-3-yl-phenyl) benzene, 40 nm)/LiF (1 nm)/Al (100 nm) display good electroluminescence performances with a maximum luminance of 48 981 cd m-2, a maximum current efficiency of 92.79 cd A-1 and a maximum external quantum efficiency up to 31.8%, respectively, and the efficiency roll-off ratio is low, suggesting that they have potential application in OLEDs.

Efficient orange-red electroluminescence of iridium complexes with 1-(2,6-bis(trifluoromethyl)pyridin-4-yl)isoquinoline and 4-(2,6-bis(trifluoromethyl)pyridin-4-yl)quinazoline ligands.

Two novel iridium(iii) complexes, Ir(tfmpiq)2(acac) (tfmpiq = 1-(2,6-bis(trifluoromethyl)pyridin-4-yl)isoquinoline, acac = acetylacetone) and Ir(tfmpqz)2(acac) (tfmpqz = 4-(2,6-bis(trifluoromethyl)pyridin-4-yl)quinazoline), were synthesized and thoroughly investigated. Both complexes emit orange-red photoluminescence with high quantum yields (Ir(tfmpiq)2(acac): λmax: 587 nm, ηPL: 42%; Ir(tfmpqz)2(acac): λmax: 588 nm, ηPL: 91%). Furthermore, the complex containing quinazoline shows higher electron mobility than that with isoquinoline. The organic light-emitting diodes (OLEDs) with single- or double-emitting layers (EML) were fabricated using two new emitters. The double-EML device using Ir(tfmpqz)2(acac) with the structure of ITO (indium-tin-oxide)/MoO3 (molybdenum oxide, 3 nm)/TAPC (di-[4-(N,N-ditolyl-amino)-phenyl]cyclohexane, 50 nm)/Ir(tfmpqz)2(acac) (1 wt%):TcTa (4,4',4''-tris(carbazole-9-yl)triphenylamine, 10 nm)/Ir(tfmpqz)2(acac) (1 wt%):2,6DCzPPy (2,6-bis(3-(carbazol-9-yl)phenyl)pyridine, 10 nm)/TmPyPB (1,3,5-tri(m-pyrid-3-yl-phenyl)benzene, 50 nm)/LiF (1 nm)/Al (100 nm) displays good electroluminescence performances with a maximum luminance of 96 609 cd m-2, a maximum current efficiency of 59.09 cd A-1, a maximum external quantum efficiency of 20.2%, a maximum power efficiency of 53.61 lm W-1, and the efficiency roll-off ratio is mild.