Axial Higgs mode detected by quantum pathway interference in RTe3.

The observation of the Higgs boson solidified the standard model of particle physics. However, explanations of anomalies (for example, dark matter) rely on further symmetry breaking, calling for an undiscovered axial Higgs mode1. The Higgs mode was also seen in magnetic, superconducting and charge density wave (CDW) systems2,3. Uncovering the vector properties of a low-energy mode is challenging, and requires going beyond typical spectroscopic or scattering techniques. Here we discover an axial Higgs mode in the CDW system RTe3 using the interference of quantum pathways. In RTe3 (R = La, Gd), the electronic ordering couples bands of equal or different angular momenta4-6. As such, the Raman scattering tensor associated with the Higgs mode contains both symmetric and antisymmetric components, which are excited via two distinct but degenerate pathways. This leads to constructive or destructive interference of these pathways, depending on the choice of the incident and Raman-scattered light polarization. The qualitative behaviour of the Raman spectra is well captured by an appropriate tight-binding model, including an axial Higgs mode. Elucidation of the antisymmetric component is direct evidence that the Higgs mode contains an axial vector representation (that is, a pseudo-angular momentum) and hints that the CDW is unconventional. Thus, we provide a means for measuring quantum properties of collective modes without resorting to extreme experimental conditions.

Real-space visualization of a defect-mediated charge density wave transition.

We study the coupled charge density wave (CDW) and insulator-to-metal transitions in the 2D quantum material 1T-TaS2. By applying in situ cryogenic 4D scanning transmission electron microscopy with in situ electrical resistance measurements, we directly visualize the CDW transition and establish that the transition is mediated by basal dislocations (stacking solitons). We find that dislocations can both nucleate and pin the transition and locally alter the transition temperature Tc by nearly ~75 K. This finding was enabled by the application of unsupervised machine learning to cluster five-dimensional, terabyte scale datasets, which demonstrate a one-to-one correlation between resistance-a global property-and local CDW domain-dislocation dynamics, thereby linking the material microstructure to device properties. This work represents a major step toward defect-engineering of quantum materials, which will become increasingly important as we aim to utilize such materials in real devices.

Getting rights right: implementing 'Martha's Rule'.

The UK government has recently committed to adopting a new policy-dubbed 'Martha's Rule'-which has been characterised as providing patients the right to rapidly access a second clinical opinion in urgent or contested cases. Support for the rule emerged following the death of Martha Mills in 2021, after doctors failed to admit her to intensive care despite concerns raised by her parents. We argue that framing this issue in terms of patient rights is not productive, and should be avoided. Insofar as the ultimate goal of Martha's Rule is the provision of a clinical service that protects patient safety, an approach that focuses on the obligations of the health system-rather than the individual rights of patients-will better serve this goal. We outline an alternative approach that situates rapid clinical review as part of a suite of services aimed at enhancing and protecting patient care. This approach would make greater progress towards addressing the difficult systemic issues that Martha's Rule does not, while also better engaging with the constraints of clinical practice.

Assessing relative risks of municipal wastewater disposal options for Southeast Florida.

A comparative assessment of the risks of the three current wastewater effluent disposal options and three other potential options was conducted for Southeast Florida communities. The question was how the risk to humans from the use of potable reuse compares to the other five available wastewater disposal alternatives. The need for this type of risk assessment is due to the potential to use potable reuse as a water supply and the potential resistance from the public as a result of such a proposal. Water quality data relevant to disposal of wastewater treatment plant effluent from South Florida utilities along with water quality data on the receiving waters and drinking water standards were obtained for the project. The comparison of the public health risks associated with these disposal alternatives indicated that health risks associated with deep wells and direct potable reuse were generally lower than those of the other alternatives.

Two-Dimensional Violet Phosphorus P11: A Large Band Gap Phosphorus Allotrope.

The discovery of novel large band gap two-dimensional (2D) materials with good stability and high carrier mobility will innovate the next generation of electronics and optoelectronics. A new allotrope of 2D violet phosphorus P11 was synthesized via a salt flux method in the presence of bismuth. Millimeter-sized crystals of violet-P11 were collected after removing the salt flux with DI water. From single-crystal X-ray diffraction, the crystal structure of violet-P11 was determined to be in the monoclinic space group C2/c (no. 15) with unit cell parameters of a = 9.166(6) Å, b = 9.121(6) Å, c = 21.803(14)Å, ß = 97.638(17)°, and a unit cell volume of 1807(2) Å3. The structure differences between violet-P11, violet-P21, and fibrous-P21 are discussed. The violet-P11 crystals can be mechanically exfoliated down to a few layers (∼6 nm). Photoluminescence and Raman measurements reveal the thickness-dependent nature of violet-P11, and exfoliated violet-P11 flakes were stable in ambient air for at least 1 h, exhibiting moderate ambient stability. The bulk violet-P11 crystals exhibit excellent stability, being stable in ambient air for many days. The optical band gap of violet-P11 bulk crystals is 2.0(1) eV measured by UV-Vis and electron energy-loss spectroscopy measurements, in agreement with density functional theory calculations which predict that violet-P11 is a direct band gap semiconductor with band gaps of 1.8 and 1.9 eV for bulk and monolayer, respectively, and with a high carrier mobility. This band gap is the largest among the known single-element 2D layered bulk crystals and thus attractive for various optoelectronic devices.

Synergizing Electron and Heat Flows in Photocatalyst for Direct Conversion of Captured CO2.

We report a ternary hybrid photocatalyst architecture with tailored interfaces that boost the utilization of solar energy for photochemical CO2 reduction by synergizing electron and heat flows in the photocatalyst. The photocatalyst comprises cobalt phthalocyanine (CoPc) molecules assembled on multiwalled carbon nanotubes (CNTs) that are decorated with nearly monodispersed cadmium sulfide quantum dots (CdS QDs). The CdS QDs absorb visible light and generate electron-hole pairs. The CNTs rapidly transfer the photogenerated electrons from CdS to CoPc. The CoPc molecules then selectively reduce CO2 to CO. The interfacial dynamics and catalytic behavior are clearly revealed by time-resolved and in situ vibrational spectroscopies. In addition to serving as electron highways, the black body property of the CNT component can create local photothermal heating to activate amine-captured CO2 , namely carbamates, for direct photochemical conversion without additional energy input.

A percolation theory for designing corrosion-resistant alloys.

Iron-chromium and nickel-chromium binary alloys containing sufficient quantities of chromium serve as the prototypical corrosion-resistant metals owing to the presence of a nanometre-thick protective passive oxide film1-8. Should this film be compromised by a scratch or abrasive wear, it reforms with little accompanying metal dissolution, a key criterion for good passive behaviour. This is a principal reason that stainless steels and other chromium-containing alloys are used in critical applications ranging from biomedical implants to nuclear reactor components9,10. Unravelling the compositional dependence of this electrochemical behaviour is a long-standing unanswered question in corrosion science. Herein, we develop a percolation theory of alloy passivation based on two-dimensional to three-dimensional crossover effects that accounts for selective dissolution and the quantity of metal dissolved during the initial stage of passive film formation. We validate this theory both experimentally and by kinetic Monte Carlo simulation. Our results reveal a path forward for the design of corrosion-resistant metallic alloys.

Adolescent with abdominal pain poorly responsive to analgesia.

Case presentationA 14-year-old boy, with autism spectrum disorder, presented with a 1-day history of colicky abdominal pain, non-bilious vomiting, anorexia and loose normal-coloured stool. Two days previously, he had a poorly reheated takeaway chicken.On examination, body mass index (BMI) was >99th centile. He had inconsistent epigastric, periumbilical and umbilical tenderness, and guarding, with normal bowel sounds. Observations were within normal limits, but his pain was poorly responsive to paracetamol, ibuprofen, hyoscine butylbromide, codeine and morphine.Investigations are in table 1. On day 3, his temperature increased to 38.5° and a CT scan was performed, which showed concerning features (figure 1).

Face morphogenesis is promoted by Pbx-dependent EMT via regulation of Snail1 during frontonasal prominence fusion.

Human cleft lip with or without cleft palate (CL/P) is a common craniofacial abnormality caused by impaired fusion of the facial prominences. We have previously reported that, in the mouse embryo, epithelial apoptosis mediates fusion at the seam where the prominences coalesce. Here, we show that apoptosis alone is not sufficient to remove the epithelial layers. We observed morphological changes in the seam epithelia, intermingling of cells of epithelial descent into the mesenchyme and molecular signatures of epithelial-mesenchymal transition (EMT). Utilizing mouse lines with cephalic epithelium-specific Pbx loss exhibiting CL/P, we demonstrate that these cellular behaviors are Pbx dependent, as is the transcriptional regulation of the EMT driver Snail1. Furthermore, in the embryo, the majority of epithelial cells expressing high levels of Snail1 do not undergo apoptosis. Pbx1 loss- and gain-of-function in a tractable epithelial culture system revealed that Pbx1 is both necessary and sufficient for EMT induction. This study establishes that Pbx-dependent EMT programs mediate murine upper lip/primary palate morphogenesis and fusion via regulation of Snail1. Of note, the EMT signatures observed in the embryo are mirrored in the epithelial culture system.

Convergent evolution of gene expression in two high-toothed stickleback populations.

Changes in developmental gene regulatory networks enable evolved changes in morphology. These changes can be in cis regulatory elements that act in an allele-specific manner, or changes to the overall trans regulatory environment that interacts with cis regulatory sequences. Here we address several questions about the evolution of gene expression accompanying a convergently evolved constructive morphological trait, increases in tooth number in two independently derived freshwater populations of threespine stickleback fish (Gasterosteus aculeatus). Are convergently evolved cis and/or trans changes in gene expression associated with convergently evolved morphological evolution? Do cis or trans regulatory changes contribute more to gene expression changes accompanying an evolved morphological gain trait? Transcriptome data from dental tissue of ancestral low-toothed and two independently derived high-toothed stickleback populations revealed significantly shared gene expression changes that have convergently evolved in the two high-toothed populations. Comparing cis and trans regulatory changes using phased gene expression data from F1 hybrids, we found that trans regulatory changes were predominant and more likely to be shared among both high-toothed populations. In contrast, while cis regulatory changes have evolved in both high-toothed populations, overall these changes were distinct and not shared among high-toothed populations. Together these data suggest that a convergently evolved trait can occur through genetically distinct regulatory changes that converge on similar trans regulatory environments.

An intronic enhancer of Bmp6 underlies evolved tooth gain in sticklebacks.

Threespine stickleback fish offer a powerful system to dissect the genetic basis of morphological evolution in nature. Marine sticklebacks have repeatedly invaded and adapted to numerous freshwater environments throughout the Northern hemisphere. In response to new diets in freshwater habitats, changes in craniofacial morphology, including heritable increases in tooth number, have evolved in derived freshwater populations. Using a combination of quantitative genetics and genome resequencing, here we fine-mapped a quantitative trait locus (QTL) regulating evolved tooth gain to a cluster of ten QTL-associated single nucleotide variants, all within intron four of Bone Morphogenetic Protein 6 (Bmp6). Transgenic reporter assays revealed this intronic region contains a tooth enhancer. We induced mutations in Bmp6, revealing required roles for survival, growth, and tooth patterning. Transcriptional profiling of Bmp6 mutant dental tissues identified significant downregulation of a set of genes whose orthologs were previously shown to be expressed in quiescent mouse hair stem cells. Collectively these data support a model where mutations within a Bmp6 intronic tooth enhancer contribute to evolved tooth gain, and suggest that ancient shared genetic circuitry regulates the regeneration of diverse vertebrate epithelial appendages including mammalian hair and fish teeth.

Chemical and Physical Characterization of 3D Printer Aerosol Emissions with and without a Filter Attachment.

Fused filament fabrication three-dimensional (3D) printers have been shown to emit ultrafine particles (UFPs) and volatile organic compounds (VOCs). Previous studies have quantified bulk 3D printer particle and VOC emission rates, as well as described particle chemical composition via ex situ analysis. Here, we present size-resolved aerosol composition measurements from in situ aerosol mass spectrometry and ex situ transmission electron microscopy (TEM). Particles were sampled for in situ analysis during acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA) 3D printing activities and ex situ analysis during ABS printing. We examined the effect of a high-efficiency particulate air filter attachment on ABS emissions and particle chemical composition and demonstrate that filtration was effective in preventing UFP emissions and that particles sampled during filtered prints did not have a high contribution (∼4% vs ∼10%) from aromatic ions in the mass spectrum. Ex situ analysis of particles collected during ABS printing was performed via TEM and electron energy loss spectroscopy, which indicated a high level of sp2 bonding type consistent with polymeric styrene. One 3D print with PLA resulted in an aerosol mass size distribution with a peak at ∼300 nm. Unfiltered ABS prints resulted in particle mass size distributions with peak diameters of ∼100 nm.

Edge Capping of 2D-MXene Sheets with Polyanionic Salts To Mitigate Oxidation in Aqueous Colloidal Suspensions.

MXenes have shown promise in myriad applications, such as energy storage, catalysis, EMI shielding, among many others. However, MXene oxidation in aqueous colloidal suspensions when stored in water at ambient conditions remains a challenge. It is now shown that by simply capping the edges of individual MXene flakes, Ti3 C2 Tz and V2 CTz , by polyanions such as polyphosphates, polysilicates or polyborates, it is possible to quite significantly reduce their propensity for oxidation even when held in aerated water for weeks. This breakthrough resulted from the realization that the edges of MXene sheets are positively charged. It is thus an example of selectively functionalizing the edges differently from the MXene sheet surfaces.

Pbx loss in cranial neural crest, unlike in epithelium, results in cleft palate only and a broader midface.

Orofacial clefting represents the most common craniofacial birth defect. Cleft lip with or without cleft palate (CL/P) is genetically distinct from cleft palate only (CPO). Numerous transcription factors (TFs) regulate normal development of the midface, comprising the premaxilla, maxilla and palatine bones, through control of basic cellular behaviors. Within the Pbx family of genes encoding Three Amino-acid Loop Extension (TALE) homeodomain-containing TFs, we previously established that in the mouse, Pbx1 plays a preeminent role in midfacial morphogenesis, and Pbx2 and Pbx3 execute collaborative functions in domains of coexpression. We also reported that Pbx1 loss from cephalic epithelial domains, on a Pbx2- or Pbx3-deficient background, results in CL/P via disruption of a regulatory network that controls apoptosis at the seam of frontonasal and maxillary process fusion. Conversely, Pbx1 loss in cranial neural crest cell (CNCC)-derived mesenchyme on a Pbx2-deficient background results in CPO, a phenotype not yet characterized. In this study, we provide in-depth analysis of PBX1 and PBX2 protein localization from early stages of midfacial morphogenesis throughout development of the secondary palate. We further establish CNCC-specific roles of PBX TFs and describe the developmental abnormalities resulting from their loss in the murine embryonic secondary palate. Additionally, we compare and contrast the phenotypes arising from PBX1 loss in CNCC with those caused by its loss in the epithelium and show that CNCC-specific Pbx1 deletion affects only later secondary palate morphogenesis. Moreover, CNCC mutants exhibit perturbed rostro-caudal organization and broadening of the midfacial complex. Proliferation defects are pronounced in CNCC mutants at gestational day (E)12.5, suggesting altered proliferation of mutant palatal progenitor cells, consistent with roles of PBX factors in maintaining progenitor cell state. Although the craniofacial skeletal abnormalities in CNCC mutants do not result from overt patterning defects, osteogenesis is delayed, underscoring a critical role of PBX factors in CNCC morphogenesis and differentiation. Overall, the characterization of tissue-specific Pbx loss-of-function mouse models with orofacial clefting establishes these strains as unique tools to further dissect the complexities of this congenital craniofacial malformation. This study closely links PBX TALE homeodomain proteins to the variation in maxillary shape and size that occurs in pathological settings and during evolution of midfacial morphology.

Postmaterialism and young people's political participation in a time of austerity.

Recent trends suggest that young people in Britain are refraining from engaging in formal political processes. At the same time, they are increasingly expressing support for, and turning toward, a new and diverse range of non-institutionalized forms of political action in order to actualize their interests. Using Inglehart's ideas on postmaterialism, we consider whether this apparent rejection of mainstream politics in favour of less conventional - and sometimes radical - forms of political action is changing over time in Britain, reflecting fluctuating economic conditions witnessed over the last two decades. We do this by comparing results from surveys of British 18 year olds conducted in 2002 during an era of relative global prosperity, and then in 2011 at the height of the current global crisis. The findings suggest that British young postmaterialists are considerably more likely than materialists to participate in and support both institutionalized and non-institutionalized forms of political action.

Elucidation of insulin assembly at acidic and neutral pH: Characterization of low molecular weight oligomers.

Deficiency in insulin secretion and function that characterize type 2 diabetes often requires administration of extraneous insulin, leading to injection-site amyloidosis. Insulin aggregation at neutral pH is not well understood. Although oligomer formation is believed to play an important role, insulin oligomers have not been fully characterized yet. Here, we elucidate similarities and differences between in vitro insulin aggregation at acidic and neutral pH for a range of insulin concentrations (2.5-100 µM) by using kinetic thioflavin T fluorescence, circular dichroism, atomic force and electron microscopy imaging. Importantly, we characterize the size distribution of insulin oligomers at different assembly stages by the application of covalent cross-linking and gel electrophoresis. Our results show that at the earliest assembly stage, oligomers comprise up to 40% and 70% of soluble insulin at acidic and neutral pH, respectively. While the highest oligomer order increases with insulin concentration at acidic pH, the opposite tendency is observed at neutral pH, where oligomers up to heptamers are formed in 10 µM insulin. These findings suggest that oligomers may be on- and off-pathway assemblies for insulin at acidic and neutral pH, respectively. Agitation, which is required to induce insulin aggregation at neutral pH, is shown to increase fibril formation rate and fibrillar mass both by an order of magnitude. Insulin incubated under agitated conditions at neutral pH rapidly aggregates into large micrometer-sized aggregates, which may be of physiological relevance and provides insight into injection-site amyloidosis and toxic pulmonary aggregates induced by administration of extraneous insulin.