Interaction of Cyclodextrins with Amphiphilic Alternating Cooligomers Possessing the Dense Triazole Backbone.

The interaction of cyclodextrins (CDs) with structure-controlled polymers is expected to provide significant insights into macromolecular recognition. However, the interaction of CDs with structure-controlled polymers has been an underexamined issue of investigation. Herein, alternating amphiphilic cooligomers (oligoCnAH, where n denotes the carbon number of alkyl groups; n = 4, 8, and 12) were synthesized by copper(I)-catalyzed azide-alkyne cycloaddition polymerization of heterodimers of 4-azido-5-hexynoic acid (AH) derivatives carrying N-alkylamide and t-butyl (tBu) ester side chains, followed by hydrolysis of the tBu ester, to study the interaction of CDs with oligoCnAH by 1H NMR, nuclear Overhauser effect spectroscopy, and pulse-field-gradient spin-echo NMR. These NMR studies indicated that αCD interacted with oligoC4AH, αCD and ßCD interacted with oligoC8AH, and all CDs interacted with oligoC12AH. Based on the equilibrium models proposed, the binding constants were evaluated for the binary mixtures, which showed interaction. Comparing the interactions of the CDs/oligoC12AH binary mixtures with those of the binary mixtures of CDs and alternating copolymers of sodium maleate and dodecyl vinyl ether (polyC12M), it is concluded that oligoC12AH forms less stable micelles than does polyC12M presumably because of the lower molecular weight, the hydrophilic amide groups in the side chain, and the longer interval between neighboring C12 groups in oligoC12AH.

Density Function Theory Study on the Energy and Circular Dichroism Spectrum for Methylene-Linked Triazole Diads Depending on the Substitution Position and Conformation.

Since the discovery of metal-catalyzed azide-alkyne cycloadditions, 1,2,3-triazoles have been widely used as linkers for various residues. 1,2,3-Triazole is an aromatic five-membered cyclic compound consisting of three nitrogen and two carbon atoms with large dipoles that absorb UV light. In the past decade, we have been working on the synthesis of dense triazole polymers possessing many 1,2,3-triazole residues linked through a carbon atom in their backbone as a new type of functional polymer. Recently, we reported that stereoregular dense triazole uniform oligomers exhibit a circular dichroism signal based on the chiral arrangement of two neighboring 1,2,3-triazole residues. In this study, to investigate the chiral conformation of two neighboring 1,2,3-triazole residues in stereoregular dense triazole uniform oligomers, density functional theory (DFT) calculations were performed using 1,2,3-triazole diads with different substitution positions and conformations as model compounds and compared with our previous results.

Synthesis of New Thermoresponsive Polymers Possessing the Dense 1,2,3-Triazole Backbone.

Thermoresponsive water-soluble polymers, aqueous solutions of which undergo lower critical solution temperature (LCST)-type phase separation, have been investigated in detail for several decades. To develop LCST-type thermoresponsive polymers with new polymer backbone, 4-azido-5-hexynamide (AHA) derivatives were designed as monomers for copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) polymerization. AHA derivatives carrying secondary amide side chains, that is, 4-azido-N-methyl-5-hexynamide (M), 4-azido-N-ethyl-5-hexynamide (E), and 4-azido-N-isopropyl-5-hexynamide (iP), were first synthesized and polymerized by CuAAC to obtain polymers (poly(M), poly(E), and poly(iP)). Contrary to our expectation, poly(M), poly(E), and poly(iP) were insoluble in water and many organic solvents presumably because of the formation of hydrogen bonding between the amide side chains or between the amide side chains and triazole residues in the backbone. Thus, AHA derivatives carrying tertiary amide side chains, that is, 4-azido-N,N-dimethyl-5-hexynamide (MM), 4-azido-N-ethyl-N-methyl-5-hexynamide (ME), 4-azido-N-isopropyl-N-methyl-5-hexynamide (MiP), and 4-azido-N,N-diethyl-5-hexynamide (EE), were also synthesized and polymerized to yield polymers (poly(MM), poly(ME), poly(MiP), and poly(EE)). These polymers were soluble in a number of common organic solvents. It is noteworthy that poly(MM) and poly(ME) were also soluble in water. The phase separation behavior of 1.0 wt % aqueous solutions of poly(MM) and poly(ME) was then investigated by transmittance measurements. These data indicated that poly(ME) was an LCST-type thermoresponsive polymer, whereas poly(MM) was not. A large hysteresis was observed in the transmittance measurements for the poly(ME) aqueous solution because of slow rehydration after phase separation. The phase separation behavior was investigated preliminarily by differential scanning calorimetry and 1H NMR.

Formose reaction accelerated in aerosol-OT reverse micelles.

The formose reaction in reverse micelles of aerosol-OT (AOT), triton X-100 (TX), and hexadecyltrimethylammonium bromide (CTAB) was investigated. Time-conversion data have indicated that the interfacial water layer of AOT reverse micelles is a medium that accelerates formation of glycolaldehyde in the formose reaction. The 13C NMR spectra for the products of the formose reaction using formaldehyde-13C as starting material are indicative of the formation of ethylene glycol as a major product.

Formose reaction controlled by boronic acid compounds.

Formose reactions were carried out in the presence of low molecular weight and macromolecular boronic acid compounds, i.e., sodium phenylboronate (SPB) and a copolymer of sodium 4-vinylphenylboronate with sodium 4-styrenesulfonate (pVPB/NaSS), respectively. The boronic acid compounds provided different selectivities; sugars of a small carbon number were formed favorably in the presence of SPB, whereas sugar alcohols of a larger carbon number were formed preferably in the presence of pVPB/NaSS.

Macroscopic self-assembly based on complementary interactions between nucleobase pairs.

We have created a selective macroscopic self-assembly process by using polymer gels modified with complementary DNA oligonucleotides or nucleobases. The hydrogels modified with complementary DNA oligonucleotides adhered to each other by simple contact. The organogels modified with complementary nucleobases selectively formed macroscopic assemblies by agitation in nonpolar organic solvents. The adhesion strength of each gel was estimated semi-quantitatively by stress-strain measurements. We achieved direct adhesion between macroscopic materials both in water and in organic media, based on complementary hydrogen bonds.

A Light-Controlled Release System Based on Molecular Recognition of Cyclodextrins.

This Communication describes a new light-controlled release system based on molecular recognition of cyclodextrins. Azobenzene (Azo) residue is employed as a photoresponsive guest residue because it can switch the partner from α-cyclodextrin (αCD) to ß-cyclodextrin (ßCD) by irradiation with UV light. Poly(sodium acrylate)s possessing αCD, ßCD, and Azo residues (pAαCD, pAßCD, and pAAzo, respectively) are mixed in aqueous solutions to form aggregates through the formation of inclusion complexes of Azo with αCD and/or ßCD. A chemical cargo, 1-pyrenemethylammonium chloride (PyMA), is contained in the aggregates, and its release behavior is investigated by dialysis experiments under UV irradiation. These data indicate that the amount of PyMA released for the pAαCD/pAßCD/pAAzo ternary mixture is approximately three times as high as those for the pAαCD/pAAzo and pAßCD/pAAzo binary mixtures because of the light-controlled rearrangement of inclusion complexes.

Quarternization of 3-azido-1-propyne oligomers obtained by copper(I)-catalyzed azide-alkyne cycloaddition polymerization.

3-Azido-1-propyne oligomer (oligoAP) samples, prepared by copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) polymerization, were quarternized quantitatively with methyl iodide in sulfolane at 60 °C to obtain soluble oligomers. The conformation of the quarternized oligoAP in dilute DMSO-d 6 solution was examined by pulse-field-gradient spin-echo NMR based on the touched bead model.

Cyclodextrin-based molecular machines.

This chapter overviews molecular machines based on cyclodextrins (CDs). The categories of CD-based molecular machines, external stimuli for CD-based molecular machines, and typical examples of CD-based molecular machines are briefly described.

pH-responsive self-assembly by molecular recognition on a macroscopic scale.

Macroscopic pH-responsive self-assembly is successfully constructed by polyacrylamide(pAAm)-based gels carrying dansyl (Dns) and ß-cyclodextrin (ßCD) residues, which are represented as Dns-gel and ßCD-gel, respectively. Dns-gel and ßCD-gel assemble together at pH ≥ 4.0, but disassemble at pH ≤ 3.0. The adhesion strengths for pairs of Dns-gel/ßCD-gel increase with increasing pH. The fluorescence study on the model system of pAAm modified with 1 mol% Dns moieties (pAAm/Dns) reveals that Dns residues are protonated at a lower pH, which results in the reduction in binding constant (K) for Dns residues and ßCD.

Synthesis of Dense 1,2,3-Triazole Oligomers Consisting Preferentially of 1,5-Disubstituted Units via Ruthenium(II)-Catalyzed Azide-Alkyne Cycloaddition.

Ruthenium(II)-catalyzed azide-alkyne cycloaddition (RuAAC) polymerization of t-butyl 4-azido-5-hexynoate (tBuAH), i.e., a heterobifunctional monomer carrying azide and alkyne moieties, was investigated in this study. RuAAC of the monofunctional precursors of tBuAH yielded a dimer possessing a 1,5-disubstituted 1,2,3-triazole moiety. 1H NMR data showed that the dimer was a mixture of diastereomers. Polymerization of tBuAH using ruthenium(II) (Ru(II)) catalysts produced oligomers of Mw ≈ (2.7-3.6) × 103 consisting of 1,5-disubstituted 1,2,3-triazole units (1,5-units) as well as 1,4-disubstituted 1,2,3-triazole units (1,4-units). The fractions of 1,5-unit (f1,5) were roughly estimated to be ca. 0.8 by comparison of signals of the methine and triazole protons in 1H NMR spectra, indicating that RuAAC proceeded preferentially and thermal Huisgen cycloaddition (HC) somehow took place during the polymerization. The oligomer samples obtained were also characterized by solubility test, size exclusion chromatography (SEC), ultraviolet-visible (UV-Vis) absorption spectroscopy, and thermogravimetric analysis (TGA). The UV-Vis and TGA data indicated that the oligomer samples contained a substantial amount of Ru(II) catalysts. To the best of our knowledge, this is the first report on dense 1,2,3-triazole oligomers consisting of 1,5-units linked via a carbon atom.

Preferential formation of specific hexose and heptose in the formose reaction under microwave irradiation.

To realize sustainable societies, the production of organic compounds not based on fossil resources should be developed. Thus, C1 chemistry, utilizing one-carbon compounds as starting materials, has been of increasing importance. In particular, the formose reaction is promising because the reaction produces sugars (monosaccharides) from formaldehyde under basic conditions. On the other hand, since microwave (MW) induces the rotational motion of molecules, MW irradiation often improves the selectivity and efficiency of reactions. In this study, the formose reaction under MW irradiation was thus investigated under various conditions. The formose reaction proceeded very fast using 1.0 mol per kg formaldehyde and 55 mmol per kg calcium hydroxide (Ca(OH)2) as a catalyst at a high set temperature (150 °C) for a short time (1 min) to form preferentially specific hexose and heptose. The major products were isolated by thin layer chromatography and characterized by mass spectroscopy and NMR. These characterization data elucidated that the hexose and heptose were 2-hydroxymethyl-1,2,4,5-tetrahydroxy-3-pentanone (C6*) and 2,4-bis(hydroxymethyl)-1,2,4,5-tetrahydroxy-3-pentanone (C7*), respectively. On the basis of these observations, as well as density functional theory calculations, a plausible reaction pathway was also discussed; once 1,3-dihydroxyacetone is formed, consecutive aldol reactions favorably occur to form C6* and C7*.

Phase behavior of aqueous solutions of copolymers of N,N'-diisopropylfumaramide and N-isopropylacrylamide: effect of the density of side chains.

This letter describes the phase behavior of aqueous solutions of an N-isopropylacrylamide (NIPAM) homopolymer and copolymers of N,N'-diisopropylfumaramide (DIPFAM) and NIPAM as studied by transmittance measurements, infrared spectroscopy, and differential scanning calorimetry to reveal the effect of the density of N-isopropylamide side chain upon the phase behavior. The clouding-point and clearing-point temperatures decreased with increasing the mole fraction of DIPFAM (x(D)). It was noteworthy that only an extra side chain per ca. 7 NIPAM units had a remarkable effect on the phase behavior; the interactions between side chains were stronger, the intrapolymer contraction was less favorable, and the cooperativity of phase transition was lower at x(D) = 0.15 presumably because of the steric hindrance of dense side chains.

Interaction of cyclodextrins with pyrene-modified polyacrylamide in a mixed solvent of water and dimethyl sulfoxide as studied by steady-state fluorescence.

The interaction of ß- and γ-cyclodextrins (ß-CD and γ-CD, respectively) with polyacrylamide modified with pyrenyl (Py) residues (pAAmPy) was investigated in a mixed solvent of water and dimethyl sulfoxide (DMSO) by steady-state fluorescence. In the absence of CD, the fluorescence spectra indicated that the formation of Py dimers became less favorable with increasing volume fraction of DMSO (x(DMSO)). The fluorescence spectra at varying x(DMSO) and CD concentrations indicated that ß-CD and γ-CD included monomeric and dimeric Py residues, respectively. Using the fluorescence spectra, equilibrium constants of the formation of Py dimers and the complexation of ß-CD and γ-CD with Py residues were roughly estimated based on simplified equilibrium schemes.

Macroscopic observations of molecular recognition: discrimination of the substituted position on the naphthyl group by polyacrylamide gel modified with ß-cyclodextrin.

Macroscopic molecular recognition observations were realized using polyacrylamide-based gels modified with α-cyclodextrin (α-CD), ß-cyclodextrin (ß-CD), 1-naphthylmethyl (1Np), and 2-naphthylmethyl (2Np) moieties, which are denoted as αCD(x)-gel, ßCD(x)-gel, 1Np(y)-gel, and 2Np(y)-gel, where x and y indicate the mol % of CD and Np moieties, respectively. The αCD(5)-gel did not adhere to either the 1Np(5)-gel or 2Np(5)-gel, whereas the ßCD(5)-gel interacted with both to form alternating or checkered assemblies. Although the difference in the association constants of ß-CD for the model polymers was small, the ßCD(x)-gel successfully discriminated between 1Np(y)-gel and 2Np(y)-gel at the appropriate x and y.

Macromolecular recognition: discrimination between human and bovine serum albumins by cyclodextrins.

The interactions of cyclodextrins (CDs) with human serum albumin (HSA) and bovine serum albumin (BSA) were investigated by two-dimensional nuclear Overhauser effect spectroscopy (2D NOESY), steady state fluorescence, isothermal titration calorimetry, and circular dichroism spectroscopy. 2D NOESY indicates that α-CD and ß-CD, but not γ-CD, interact with the aromatic amino acid residues on HSA. On the other hand, the 2D NOESY signals between CDs and BSA are not significantly correlated. Hence, CDs can discriminate the subtle protein structural differences of HSA and BSA.

Synthesis of a New Polyanion Possessing Dense 1,2,3-Triazole Backbone.

Polyanions are an important class of water-soluble polymers because polyanions are utilized in a wide range of industrial fields. It is thus a great challenge to develop polyanions with novel structures to make their applications broader. In this study, a new polyanion with a dense 1,2,3-triazole backbone, poly(4-azido-5-hexanoic acid) (poly(AH)), was synthesized by copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) polymerization of t-butyl 4-azido-5-hexanoate followed by hydrolysis of the t-butyl ester groups. Turbidimetric and potentiometric titration data indicated that poly(AH) was well soluble in water under basic conditions (pH < 7) and a weaker polyanion (apparent pKa = 5.4) than polyacrylic acid (apparent pKa = 4.5). Adsorption tests exhibited that sodium salt of poly(AH) (poly(AH)Na) adsorbed most preferably Fe3+ among the four metal ions examined, i.e., Cu2+, Pb2+, Li+, and Fe3+. 1H spin-lattice relaxation time measurements indicated that Fe3+ ions were adsorbed favorably onto the 1,2,3-triazole residues.

Synthesis of Dense 1,2,3-Triazole Polymers Soluble in Common Organic Solvents.

Aiming at synthesis of dense 1,2,3-triazole polymers soluble in common organic solvents, a new 3-azido-1-propyne derivative, i.e., t-butyl 4-azido-5-hexynoate (tBuAH), was synthesized and polymerized by copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) and Huisgen cycloaddition (HC). CuAAC polymerization produced poly(tBuAH) composed of 1,4-disubstituted 1,2,3-triazole units (1,4-units), whereas HC polymerization gave poly(tBuAH) composed of 1,4- and 1,5-disubstituted 1,2,3-triazole units (1,4- and 1,5-units). In HC polymerization, the fraction of 1,4-unit (f1,4) decreased with the permittivity of solvent used. Differential scanning calorimetry data indicated that the melting point of poly(tBuAH) increased from 61 to 89 °C with increasing f1,4 from 0.38 to 1.0, indicative of higher crystallinity of poly(tBuAH) composed of 1,4-unit. Preliminary steady-state fluorescence study indicated that all the poly(tBuAH) samples of different f1,4 emitted weak but significant fluorescence in DMF. The maximum of fluorescence band shifted from ca. 350 to ca. 450 nm with varying the excitation wavelength from 300 to 400 nm.

The macroscopic shape of assemblies formed from microparticles based on host-guest interaction dependent on the guest content.

Biological macroscopic assemblies have inspired researchers to utilize molecular recognition to develop smart materials in these decades. Recently, macroscopic self-assemblies based on molecular recognition have been realized using millimeter-scale hydrogel pieces possessing molecular recognition moieties. During the study on macroscopic self-assembly based on molecular recognition, we noticed that the shape of assemblies might be dependent on the host-guest pair. In this study, we were thus motivated to study the macroscopic shape of assemblies formed through host-guest interaction. We modified crosslinked poly(sodium acrylate) microparticles, i.e., superabsorbent polymer (SAP) microparticles, with ß-cyclodextrin (ßCD) and adamantyl (Ad) residues (ßCD(x)-SAP and Ad(y)-SAP microparticles, respectively, where x and y denote the mol% contents of ßCD and Ad residues). Then, we studied the self-assembly behavior of ßCD(x)-SAP and Ad(y)-SAP microparticles through the complexation of ßCD with Ad residues. There was a threshold of the ßCD content in ßCD(x)-SAP microparticles for assembly formation between x = 22.3 and 26.7. On the other hand, the shape of assemblies was dependent on the Ad content, y; More elongated assemblies were formed at a higher y. This may be because, at a higher y, small clusters formed in an early stage can stick together even upon collisions at a single contact point to form elongated aggregates, whereas, at a smaller y, small clusters stick together only upon collisions at multiple contact points to give rather circular assemblies. On the basis of these observations, the shape of assembly formed from microparticles can be controlled by varying y.

Macromolecular Recognition of Cyclodextrin: Inversion of Selectivity of ß-Cyclodextrin toward Adamantyl Groups Induced by Macromolecular Chains.

Interaction of ß-cyclodextrin (ß-CD) with alternating copolymers (pAdMA and pAdPhMA) of sodium maleate with adamantyl (Ad) and with adamantylphenyl (AdPh) vinyl ether has been investigated by several NMR techniques. Comparing the apparent association constants (K) for the polymers with the K for the model compounds, which are determined by the analysis of (1) H NMR and isothermal titration calorimetry data, respectively, the selectivities of ß-CD toward Ad and AdPh moieties are contrasting for the model and polymer systems. This phenomenon is described by circular dichroism and 2D NMR as follows; the most stable inclusion complex for the ß-CD/AdPh model system is extremely destabilized for the corresponding polymer system because of competition with hydrophobic interaction between neighboring AdPh moieties.