RESUMO
Recent advancements in materials science have shed light on the potential of exploring hierarchical assemblies of molecules on surfaces, driven by both fundamental and applicative challenges. This field encompasses diverse areas including molecular storage, drug delivery, catalysis, and nanoscale chemical reactions. In this context, the utilization of nanotube templates (NTs) has emerged as promising platforms for achieving advanced one-dimensional (1D) molecular assemblies. NTs offer cylindrical, crystalline structures with high aspect ratios, capable of hosting molecules both externally and internally (Mol@NT). Furthermore, NTs possess a wide array of available diameters, providing tunability for tailored assembly. This review underscores recent breakthroughs in the field of Mol@NT. The first part focuses on the diverse panorama of structural properties in Mol@NT synthesized in the last decade. The advances in understanding encapsulation, adsorption, and ordering mechanisms are detailed. In a second part, the review highlights the physical interactions and photophysics properties of Mol@NT obtained by the confinement of molecules and nanotubes in the van der Waals distance regime. The last part of the review describes potential applicative fields of these 1D heterostructures, providing specific examples in photovoltaics, luminescent materials, and bio-imaging. A conclusion gathers current challenges and perspectives of the field to foster discussion in related communities.
RESUMO
In the field of phononics, periodic patterning controls vibrations and thereby the flow of heat and sound in matter. Bandgaps arising in such phononic crystals (PnCs) realize low-dissipation vibrational modes and enable applications toward mechanical qubits, efficient waveguides, and state-of-the-art sensing. Here, we combine phononics and two-dimensional materials and explore tuning of PnCs via applied mechanical pressure. To this end, we fabricate the thinnest possible PnC from monolayer graphene and simulate its vibrational properties. We find a bandgap in the megahertz regime within which we localize a defect mode with a small effective mass of 0.72 ag = 0.002 mphysical. We exploit graphene's flexibility and simulate mechanical tuning of a finite size PnC. Under electrostatic pressure up to 30 kPa, we observe an upshift in frequency of the entire phononic system by â¼350%. At the same time, the defect mode stays within the bandgap and remains localized, suggesting a high-quality, dynamically tunable mechanical system.
RESUMO
We experimentally quantify the Raman scattering from individual carbyne chains confined in double-walled carbon nanotubes. We find that the resonant differential Raman cross section of confined carbyne is on the order of 10-22 cm2 sr-1 per atom, making it the strongest Raman scatterer ever reported.
RESUMO
Transition metal dichalcogenides (TMDCs) exhibit high second harmonic (SH) generation in the visible due to their noncentrosymmetric crystal structure in odd-layered form and direct bandgap transition when thinned down to a monolayer. In order to emit the SH radiation into a desired direction, one requires a means to control the phase of the in-plane nonlinear polarization. Here, we couple the SH response of a monolayer MoS2 to an optical phased array antenna and demonstrate controllable steering of the nonlinear emission. By exploiting the intrinsic SH generation by the phased array antenna we achieve uniform emission efficiency into a broad angular range. Our work has relevance for novel optoelectronic applications, such as programmable optical interconnects and on-chip LIDAR.
RESUMO
Long linear carbon chains (LLCCs) encapsulated inside double-walled carbon nanotubes (DWCNTs) are regarded as a promising realization of carbyne, the truly one-dimensional allotrope of carbon. While the electronic and vibronic properties of the encapsulated LLCC are expected to be influenced by its nanotube host, this dependence has not been investigated experimentally so far. Here we bridge this gap by studying individual LLCCs encapsulated in DWCNTs with tip-enhanced Raman scattering (TERS). We reveal that the nanotube host, characterized by its chirality, determines the vibronic and electronic properties of the encapsulated LLCC. By choice of chirality, the fundamental Raman mode (C-mode) of the chain is tunable by â¼95 cm-1 and its band gap by â¼0.6 eV, suggesting this one-dimensional hybrid system to be a promising building block for nanoscale optoelectronics. No length dependence of the chain's C-mode frequency is evident, making LLCCs a close to perfect representation of carbyne.
RESUMO
We present a two-step procedure to probe hotspots of plasmon-enhanced Raman scattering with carbon nanotubes (CNTs). Dielectrophoretic deposition places a small CNT bundle on top of a plasmonic Au nanodimer. After 'pre-characterizing' both the nanotubes and dimer structure, we subsequently use the tip of an atomic force microscope to push the bundle into the plasmonic hotspot located in the 25 nm wide dimer gap, characterize its location inside the gap, and observe the onset of plasmon-enhanced Raman scattering. Evidence for the activation of the CNT's double-resonant D-mode by the near-field of the plasmonic hotspot is discussed.
RESUMO
Integrating layered two-dimensional (2D) materials into 3D heterostructures offers opportunities for novel material functionalities and applications in electronics and photonics. In order to build the highest quality heterostructures, it is crucial to preserve the cleanliness and morphology of 2D material surfaces that come in contact with polymers such as PDMS during transfer. Here we report that substantial residues and up to â¼0.22% compressive strain can be present in monolayer MoS2 transferred using PDMS. We show that a UV-ozone pre-cleaning of the PDMS surface before exfoliation significantly reduces organic residues on transferred MoS2 flakes. An additional 200 â¦C vacuum anneal after transfer efficiently removes interfacial bubbles and wrinkles as well as accumulated strain, thereby restoring the surface morphology of transferred flakes to their native state. Our recipe is important for building clean heterostructures of 2D materials and increasing the reproducibility and reliability of devices based on them.
RESUMO
Surface-enhanced Raman spectroscopy (SERS) enables sensitive chemical studies and materials identification, relying on electromagnetic (EM) and chemical-enhancement mechanisms. Here we introduce a tool for the correlative nanoimaging of EM and SERS hotspots, areas of strongly enhanced EM fields and Raman scattering, respectively. To that end, we implemented a grating spectrometer into a scattering-type scanning near-field optical microscope (s-SNOM) for mapping of both the elastically and inelastically (Raman) scattered light from the near-field probe, that is, a sharp silicon tip. With plasmon-resonant gold dimers (canonical SERS substrates) we demonstrate with nanoscale spatial resolution that the enhanced Raman scattering from the tip is strongly correlated with its enhanced elastic scattering, the latter providing access to the EM-field enhancement at the illumination frequency. Our technique has wide application potential in the correlative nanoimaging of local-field enhancement and SERS efficiency as well as in the investigation and quality control of novel SERS substrates.
RESUMO
We isolated the plasmonic contribution to surface-enhanced Raman scattering (SERS) and found it to be much stronger than expected. Organic dyes encapsulated in single-walled carbon nanotubes are ideal probes for quantifying plasmonic enhancement in a Raman experiment. The molecules are chemically protected through the nanotube wall and spatially isolated from the metal, which prevents enhancement by chemical means and through surface roughness. The tubes carry molecules into SERS hotspots, thereby defining molecular position and making it accessible for structural characterization with atomic-force and electron microscopy. We measured a SERS enhancement factor of 106 on α-sexithiophene (6T) molecules in the gap of a plasmonic nanodimer. This is two orders of magnitude stronger than predicted by the electromagnetic enhancement theory (104). We discuss various phenomena that may explain the discrepancy (including hybridization, static and dynamic charge transfer, surface roughness, uncertainties in molecular position and orientation), but found all of them lacking in enhancement for our probe system. We suggest that plasmonic enhancement in SERS is, in fact, much stronger than currently anticipated. We discuss novel approaches for treating SERS quantum mechanically that appear promising for predicting correct enhancement factors. Our findings have important consequences on the understanding of SERS as well as for designing and optimizing plasmonic substrates.
RESUMO
We realize the coupling of carbon nanotubes as a one-dimensional model system to near-field cavities for plasmon-enhanced Raman scattering. Directed dielectrophoretic assembly places single-walled carbon nanotubes precisely into the gap of gold nanodimers. The plasmonic cavities enhance the Raman signal of a small nanotube bundle by a factor of 10(3). The enhanced signal arises exclusively from tube segments within the cavity as we confirm by spatially resolved Raman measurements. Through the energy and polarization of the excitation we address the extrinsic plasmonic and the intrinsic nanotube optical response independently. For all incident light polarizations, the nanotube Raman features arise from fully symmetric vibrations only. We find strong evidence that the signal enhancement depends on the orientation of the carbon nanotube relative to the cavity axis.
RESUMO
We characterize plasmonic enhancement in a hotspot between two Au nanodisks using Raman scattering of graphene. Single layer graphene is suspended across the dimer cavity and provides an ideal two-dimensional test material for the local near-field distribution. We detect a Raman enhancement of the order of 10(3) originating from the cavity. Spatially resolved Raman measurements reveal a near-field localization one order of magnitude smaller than the wavelength of the excitation, which can be turned off by rotating the polarization of the excitation. The suspended graphene is under tensile strain. The resulting phonon mode softening allows for a clear identification of the enhanced signal compared to unperturbed graphene.
RESUMO
Raman spectroscopy enables the non-destructive characterization of chemical composition, crystallinity, defects, or strain in countless materials. However, the Raman response of surfaces or thin films is often weak and obscured by dominant bulk signals. Here we overcome this limitation by placing a transferable porous gold membrane, (PAuM) on the surface of interest. Slot-shaped nanopores in the membrane act as plasmonic antennas and enhance the Raman response of the surface or thin film underneath. Simultaneously, the PAuM suppresses the penetration of the excitation laser into the bulk, efficiently blocking its Raman signal. Using graphene as a model surface, we show that this method increases the surface-to-bulk Raman signal ratio by three orders of magnitude. We find that 90% of the Raman enhancement occurs within the top 2.5 nm of the material, demonstrating truly surface-sensitive Raman scattering. To validate our approach, we quantify the strain in a 12.5 nm thin Silicon film and analyze the surface of a LaNiO3 thin film. We observe a Raman mode splitting for the LaNiO3 surface-layer, which is spectroscopic evidence that the surface structure differs from the bulk. These results validate that PAuM gives direct access to Raman signatures of thin films and surfaces.
RESUMO
Surface-enhanced Raman spectroscopy (SERS) demands reliable, high-enhancement substrates in order to be used in different fields of application. Here we introduce freestanding porous gold membranes (PAuM) as easy-to-produce, scalable, mechanically stable, and effective SERS substrates. We fabricate large-scale sub-30 nm thick PAuM that form freestanding membranes with varying morphologies depending on the nominal gold thickness. These PAuM are mechanically stable for pressures up to more than 3 bar and exhibit surface-enhanced Raman scattering with local enhancement factors from 104 to 105, which we demonstrate by wavelength-dependent and spatially resolved Raman measurements using graphene as a local Raman probe. Numerical simulations reveal that the enhancement arises from individual, nanoscale pores in the membrane acting as optical slot antennas. Our PAuM are mechanically stable, provide robust SERS enhancement for excitation power densities up to 106 W cm-2, and may find use as a building block in SERS-based sensing applications.
RESUMO
Mechanical strain is a powerful tuning knob for excitons, Coulomb-bound electron-hole complexes dominating optical properties of two-dimensional semiconductors. While the strain response of bright free excitons is broadly understood, the behaviour of dark free excitons (long-lived excitations that generally do not couple to light due to spin and momentum conservation) or localized excitons related to defects remains mostly unexplored. Here, we study the strain behaviour of these fragile many-body states on pristine suspended WSe2 kept at cryogenic temperatures. We find that under the application of strain, dark and localized excitons in monolayer WSe2-a prototypical 2D semiconductor-are brought into energetic resonance, forming a new hybrid state that inherits the properties of the constituent species. The characteristics of the hybridized state, including an order-of-magnitude enhanced light/matter coupling, avoided-crossing energy shifts, and strain tunability of many-body interactions, are all supported by first-principles calculations. The hybridized excitons reported here may play a critical role in the operation of single quantum emitters based on WSe2. Furthermore, the techniques we developed may be used to fingerprint unidentified excitonic states.
RESUMO
We investigate the anti-Stokes Raman scattering of single carbyne chains confined inside double-walled carbon nanotubes. Individual chains are identified using tip-enhanced Raman scattering (TERS) and heated by resonant excitation with varying laser powers. We study the temperature dependence of carbyne's Raman spectrum and quantify the laser-induced heating based on the anti-Stokes/Stokes ratio. Due to its molecular size and its large Raman cross section, carbyne holds great promise for local temperature monitoring, with potential applications ranging from nanoelectronics to biology.
RESUMO
Surface-enhanced Raman scattering (SERS) and resonant Raman scattering are widely used techniques to enhance the Raman intensity of molecules and nanomaterials by several orders of magnitude. In SERS, typically, molecules are investigated and their intrinsic resonance is often ignored while discussing the plasmonic enhancement. Here, we study α-sexithiophenes encapsulated in carbon nanotubes placed in the center of a nanodimer. By dielectrophoretic deposition, we place the nanotubes precisely in the center of a plasmonic gold nanodimer and observe SERS enhancement from individual tube bundles. The encapsulated molecules are not subjected to chemical enhancement because of the protective character of the nanotube. Polarization-dependent Raman measurements confirm the alignment of the molecules within the carbon nanotubes (CNTs) and reveal the influence of the plasmonic near field on the molecule's Raman intensity. We investigate the encapsulated molecules in small CNT bundles with and without plasmonic enhancement and determine the molecular and plasmonic resonance by tuning the excitation wavelength. We observe a strong red shift of the maximum Raman intensity under plasmonic enhancement toward the plasmon resonance.
RESUMO
Pluripotent stem cells represent a promising source of differentiated tissue-specific stem and multipotent progenitor cells for regenerative medicine and drug testing. The realisation of this potential relies on the establishment of robust and reproducible protocols of differentiation. Several reports have highlighted the importance of biomaterials in assisting directed differentiation. Graphene oxide (GO) is a novel material that has attracted increasing interest in the field of biomedicine. In this study, we demonstrate that GO coated substrates significantly enhance the differentiation of mouse embryonic stem (ES) cells to both primitive and definitive haematopoietic cells. GO does not affect cell proliferation or survival of differentiated cells but rather enhances the transition of haemangioblasts to haemogenic endothelial cells, a key step during haematopoietic specification. Importantly, GO also improves, in addition to murine, human ES cell differentiation to blood cells. Taken together, our study reveals a positive role for GO in haematopoietic differentiation and suggests that further functionalization of GO could represent a valid strategy for the generation of large numbers of functional blood cells. Producing these cells would accelerate haematopoietic drug toxicity testing and treatment of patients with blood disorders or malignancies.
Assuntos
Células Sanguíneas/citologia , Células-Tronco Embrionárias/citologia , Grafite/química , Células-Tronco Hematopoéticas/citologia , Células Mieloides/citologia , Animais , Diferenciação Celular , Proliferação de Células , Sobrevivência Celular , Materiais Revestidos Biocompatíveis/química , Células-Tronco Embrionárias Humanas/citologia , Humanos , Camundongos , Células-Tronco Embrionárias Murinas/citologiaRESUMO
A simple, high throughput fractionation procedure for aqueous/SDS (sodium dodecyl sulfate) suspensions of single-walled carbon nanotubes (SWNTs) is presented, which yields thin bundles of semiconducting-SWNTs with small chiral angles. To demonstrate this we show the photoluminescence signatures of nanotube suspensions that contain almost exclusively zigzag and near-zigzag tubes. Starting suspensions and resulting fractions were characterized using optical absorption, resonance Raman and photoluminescence spectroscopies as well as scanning force microscopy. Taken together with literature observations, our findings suggest that near zigzag edge tubes of similar diameters in a bundle are harder to separate from each other than for other chiral index combinations. We discuss the implications of these observations for SWNT growth and dispersion.