Effect of Atom Transfer Radical Polymerization Reaction Time on PCB Binding Capacities of Styrene-CMA/QMA Core-Shell Iron Oxide Nanoparticles.

Water pollution continues to be one of the greatest challenges humankind faces worldwide. Increasing population growth, fast industrialization and modernization risk the worsening of water accessibility and quality in the coming years. Nanoadsorbents have steadily gained attention as remediation technologies that can meet stringent water quality demands. In this work, core-shell magnetic nanoparticles (MNPs) comprised of an iron oxide magnetic core and a styrene based polymer shell were synthesized via surface initiated atom transfer radical polymerization (SI-ATRP), and characterized them for their binding of polychlorinated biphenyls (PCBs), as model organic contaminants. Acrylated plant derived polyphenols, curcumin multiacrylate (CMA) and quercetin multiacrylate (QMA), and divinylbenzene (DVB) were incorporated into the polymeric shell to create high affinity binding sites for PCBs. The affinity of these novel materials for PCB 126 was evaluated and fitted to the nonlinear Langmuir model to determine binding affinities (KD). The KD values obtained for all the MNP systems showed higher binding affinities for PCB 126 that carbonaceous materials, like activated carbon and graphene oxide, the most widely used adsorption materials for water remediation today. The effect of increasing ATRP reaction time on the binding affinity of MNPs demonstrated the ability to tune polymer shell thickness by modifying the reaction extent and initial crosslinker concentrations in order to maximize pollutant binding. The enhancement in binding affinity and capacity for PCB 126 was demonstrated by the use of hydrophobic, aromatic rich molecules like styrene, CMA, QMA and DVB, within the polymeric shell provides more sites for π-π interactions to occur between the MNP surface and the PCB molecules. Overall, the high affinities for PCBs, as model organic pollutants, and magnetic capabilities of the core-shell MNPs synthesized provide a strong rationale for their application as nanoadsorbents in the environmental remediation of specific harmful contaminants.

Assessing the perfluoroalkyl acid-induced swelling of Förster resonance energy transfer-capable poly(N-isopropylacrylamide) microgels.

As a method to combat the extensive contamination of poly- and perfluoroalkyl substances (PFAS) in water supplies, poly(N-isopropylacrylamide) (PNIPAM) microgels copolymerized with 2,2,2-trifluoroethylacrylate (TFEA) represent a potential sensing tool for recognizing PFAS at dilute aqueous concentrations. The microgels exhibit exceptional temperature responsiveness, transitioning from a swollen z-average diameter of 890.8 ± 19.8 nm to a collapsed diameter of 246.4 ± 10.3 nm below and above their lower critical solution temperature, respectively, for non-fluorinated gels, offering broad size fluctuations that are susceptible to coadded contaminants. Monitoring size perturbations as a function of analyte concentration, the polymers were observed to deswell in the presence of perfluorooctanoic acid, octanoic acid, phenol, and sodium 1-octane sulfonate while tetraethylammonium perfluorooctane sulfonate (TPFOS) augmented swelling. Adding up to 40 mol% TFEA to the networks lowered the concentration at which the microgels' normalized z-average diameter demonstrated a significant deviation from 0.25 mM to 0.1 mM for TPFOS, indicating fluorophilicity as a key contributor to the copolymers' associative capacity. Implanting Förster resonance energy transfer-compatible dyes, cyanine 3 and cyanine 5, into non-fluorinated microgels largely reiterated results from light scattering, as expected for the size-dependent energy transfer mechanism. Including dyes did, however, reinforce the customizability of this system, leaving windows open for functionalization with other signal transduction motifs to lower the detection limits of the polymer further. The swelling changes for PNIPAM microgels stimulated by the acidic constituents of PFAS highlight the polymer as a candidate for detecting the substances following additional development.

Leveraging the thermoresponsiveness of fluorinated poly(N-isopropylacrylamide) copolymers as a sensing tool for perfluorooctane sulfonate.

Due to mounting evidence of the negative health effects of persistent perfluoroalkyl acids (PFAAs) with long (i.e., >C7) tails, there is a need for convenient systems capable of sensing these contaminants at dilute aqueous concentrations. To address this concern, a thermoresponsive polymeric network composed of poly(N-isopropylacrylamide) copolymerized with fluorinated comonomers was studied to characterize the gel's physical response to fluorosurfactants in solution. Incorporating fluorinated comonomers into the polymer backbone raised their swelling in fluorocontaminant solutions relative to water - gels synthesized with 10.0 mol% 2,2,2-trifluoroethyl acrylate (TFEA) displayed a heightened maximum water-analyte swelling difference of 3761 ± 147% compared to 3201 ± 466% for non-fluorinated gels in the presence of 1 mM tetraethylammonium perfluorooctane sulfonate (TPFOS). The normalized area under the curve for gels with 12.5 mol% TFEA was further raised to 1.77 ± 0.09, indicating a broadened response window for the contaminant, but at the cost of reducing the overall swelling ratio to 3227 ± 166% and elongating the time required to reach swelling equilibrium. Overall, a copolymer fed with 10.7 mol% TFEA was predicted to maximize both the swelling and response window of the polymer toward TPFOS. Equilibration times followed a logarithmic increase as the percentage of comonomer was raised, noting gradual fluorosurfactant penetration into the gels impeded by initial gel compaction caused by the addition of fluorinated comonomers. Comparative study of gels containing 1H,1H,7H-dodecafluoroheptyl acrylate, TFEA, or 1,1,1,3,3,3-hexafluoroisopropyl acrylate identified careful selection of fluorinated comonomers and their feed ratios as useful tools for tailoring the network's swelling response to TPFOS.

Novel magnetic core-shell nanoparticles for the removal of polychlorinated biphenyls from contaminated water sources.

In this work, we developed novel core-shell nanoparticle systems with magnetic core and polymer shell via atom transfer radical polymerization for use as high affinity nanoadsorbents for organic contaminants in water and wastewater treatment. Polyphenolic-based moieties, curcumin multiacrylate (CMA) and quercetin multiacrylate (QMA), were incorporated into poly(ethylene glycol) (PEG) based polymeric shells to create high affinity binding sites for the capture of polychlorinated biphenyls (PCBs) as a model pollutant. The resulting magnetic nanoparticles (MNPs) were characterized by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), transmission electron microscopy (TEM), X-ray diffraction (XRD), dynamic light scattering (DLS), and UV-visible spectroscopy. The affinity of these novel materials for PCB 126 was evaluated and fitted to the nonlinear Langmuir model to determine binding affinities (KD). The KD values obtained were: PEG MNPs (8.42 nM) < IO MNPs (8.23nM) < QMA MNPs (5.88 nM) < CMA MNPs (2.72 nM), demonstrating that the presence of polyphenolic-based moieties enhanced PCB 126 binding affinity, which is hypothesized to be a result of π - π stacking interactions. These values are lower that KD values for activated carbon, providing strong evidence that these novel core-shell nanoparticles have a promising application as nanoadsorbents for specific organic contaminants offering a cost effective alternative to current remediation approaches.

Curcumin Acrylation for Biological and Environmental Applications.

Curcumin has recently gained interest for use in drug delivery, chemical sensing, and environmental applications. As a result, the development of synthesis strategies for the incorporation of curcumin into novel materials has become a priority. One such strategy, curcumin acrylation, involves the introduction of acrylate functional groups to the curcumin scaffold, with the potential generation of mono-, di-, and triacrylate curcumin species. The relative populations of these species in the resulting multiacrylate mixture can be controlled by the ratio of curcumin to acryloyl chloride in the initial reaction formulation. Characterization of the acrylation reaction and the resulting curcumin multiacrylate product is essential for the effective preparation of new curcumin-containing materials. In this work, a synthesis method for curcumin acrylation is presented and the resulting curcumin multiacrylate product is characterized via various techniques, i.e., HPLC, LCMS, and NMR, as a basis to establish the relationship between synthesis conditions and the extent of acrylation that is achieved.

The effects of synthesis method on the physical and chemical properties of dextran coated iron oxide nanoparticles.

Iron oxide nanoparticles coated with dextran were synthesized via four variations on the co-precipitation method. The methods ranged from in situ formation of the nanoparticles within the dextran solution to the adsorption of dextran to the nanoparticle surface following nucleation and extensive washing. The timing of the addition of dextran into the reaction mixture was found to greatly influence the physical and chemical properties of the magnetic nanoparticles. Batches of dextran coated iron oxide nanoparticles were synthesized by each method in triplicate, and the nanoparticles were further crosslinked with epichlorohydrin. The properties of the nanoparticles such as size, percentage of dextran coating, stability in solution, crystallinity, and magnetic properties were evaluated. The simultaneous semi-two-step method injected the reducing agent and the dextran solution into the reaction vessel at the same time. This method resulted in the greatest batch-to-batch reproducibility of nanoparticle properties and the least variation in nanoparticles synthesized in the same batch. The two-step method resulted in the greatest variation of the characteristics examined between batches. The one-step method was synthesized with both five grams and one gram of dextran to investigate the effects of solution viscosity on the resulting nanoparticle characteristics. The one-step method with five grams of dextran resulted in nanoparticles with significantly smaller crystal sizes (5.4 ± 1.9 nm) and lower specific adsorption rate (SAR) values (138.4 ± 13.6 W/g) in an alternating magnetic field (58 kA/m, 292 kHz). However, this method resulted in nanoparticles that were very stable in PBS over 12 hours, which is most likely due to the greater dextran coating (60.0 ± 2.7 weight percent). For comparison, the simultaneous semi-two-step method generated nanoparticles 179.2 ± 18.3 nm in diameter (crystal size 12.1 ± 0.2 nm) containing 18.3 ± 1.2 weight percent dextran with a SAR value of 321.1 ± 137.3 W/g.

Responsive Hydrogel Nanoparticles for Pulmonary Delivery.

Nanoparticles represent one of the most widely studied classes of advanced drug delivery platforms in recent years due to a wide range of unique properties and capabilities that can be utilized to improve upon traditional drug administration. Conversely, hydrogel nanoparticles (HNPs) - also called nanogels - represent a unique class of materials that combine the intrinsic advantages of nanotechnology with the inherent capabilities of hydrogels. Responsive hydrogels pose a particularly interesting class of materials that can sense and respond to external stimuli and previous reports of inhalable hydrogel particles have highlighted their potential in pulmonary delivery. Here, we synthesized two different pH-responsive HNPs, designated HNP120 and HNP270, by incorporating functional monomers with a common crosslinker and characterized their physicochemical properties. One of the HNP systems was selected for incorporation into a composite dry powder by spray drying, and the aerodynamic performance of the resulting powder was evaluated. The HNP120s displayed a hydrodynamic diameter of approximately 120 nm in their fully swollen state and a minimal diameter of around 80 nm while the HNP270s were approximately 270 nm and 115 nm, respectively. Electron microscopy confirmed particle size- and morphological uniformity of the HNPs. The HNP120s were spray dried into composite dry powders for inhalation and cascade impaction studies showed good aerosol performance with a mass median aerosol diameter (MMAD) of 4.82 ± 0.37 and a fine particle fraction > 30%. The HNPs released from the spray dried composites retained their responsive behavior thereby illustrating the potential for these materials as intelligent drug delivery systems that combine the advantages of nanotechnology, lung targeting through pulmonary delivery, and stimuli-responsive hydrogels.

Synthesis and characterization of an antibacterial hydrogel containing covalently bound vancomycin.

The release of freely loaded small molecules from biomaterials often exhibits an initial burst, inhibiting the ability of these materials to match drug release with the biomaterial's degradation period. In terms of antibiotic release systems, the remaining vehicle may become a substrate for colonization by bacterial biofilms once the payload is depleted, which can become life threatening. Secondary surgeries are typically performed to remove these empty depots as a means of preventing this type of infection. To maintain the effectiveness of a locally delivered antibiotic without the drawback of a second surgery, we propose a hydrogel drug delivery system in which the drug release rate of vancomycin and degradation rate of the hydrogel are linked via covalent incorporation of vancomycin in the hydrogel backbone. This was achieved through coupling PEG based monomer with vancomycin to create poly(ß-amino ester) chemistry and verified through drug release and matrix degradation studies. Antibiotic release and material degradation were tunable via hydrophobic/hydrophilic content of the hydrogel matrix and extended up to 3 weeks in PBS sink conditions. Covalent addition of vancomycin to the hydrogel polymer backbone was verified through mass spectroscopy and HPLC peak addition, as well as radiotracing of collected HPLC fractions. Bioactivity of released vancomycin was also confirmed alongside the resulting antimicrobial activity of the reacted vancomycin releasate.

High-performing dry powder inhalers of paclitaxel DPPC/DPPG lung surfactant-mimic multifunctional particles in lung cancer: physicochemical characterization, in vitro aerosol dispersion, and cellular studies.

Inhalable lung surfactant-based carriers composed of synthetic phospholipids, dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylglycerol (DPPG), along with paclitaxel (PTX), were designed and optimized as respirable dry powders using organic solution co-spray-drying particle engineering design. These materials can be used to deliver and treat a wide variety of pulmonary diseases with this current work focusing on lung cancer. In particular, this is the first time dry powder lung surfactant-based particles have been developed and characterized for this purpose. Comprehensive physicochemical characterization was carried out to analyze the particle morphology, surface structure, solid-state transitions, amorphous character, residual water content, and phospholipid bilayer structure. The particle chemical composition was confirmed using attenuated total reflectance-Fourier-transform infrared (ATR-FTIR) spectroscopy. PTX loading was high, as quantified using UV-VIS spectroscopy, and sustained PTX release was measured over weeks. In vitro cellular characterization on lung cancer cells demonstrated the enhanced chemotherapeutic cytotoxic activity of paclitaxel from co-spray-dried DPPC/DPPG (co-SD DPPC/DPPG) lung surfactant-based carrier particles and the cytotoxicity of the particles via pulmonary cell viability analysis, fluorescent microscopy imaging, and transepithelial electrical resistance (TEER) testing at air-interface conditions. In vitro aerosol performance using a Next Generation Impactor™ (NGI™) showed measurable powder deposition on all stages of the NGI and was relatively high on the lower stages (nanometer aerodynamic size). Aerosol dispersion analysis of these high-performing DPIs showed mass median diameters (MMADs) that ranged from 1.9 to 2.3 µm with excellent aerosol dispersion performance as exemplified by high values of emitted dose, fine particle fractions, and respirable fractions.

Binary blend of glyceryl monooleate and glyceryl monostearate for magnetically induced thermo-responsive local drug delivery system.

PURPOSE: To develop a novel monoglycerides-based thermal-sensitive drug delivery system, specifically for local intracavitary chemotherapy. METHODS: Lipid matrices containing mixtures of glyceryl monooleate (GMO) and glyceryl monostearate (GMS) were evaluated for their potential application as magnetically induced thermo-responsive local drug delivery systems using a poorly water-soluble model drug, nifedipine (NF). Oleic acid-modified iron oxide (OA-Fe3O4) nanoparticles were embedded into the GMO-GMS matrix for remote activation of the drug release using an alternating magnetic field (AMF). RESULTS: The crystallization behavior of binary blends of GMO and GMS as characterized by DSC did show temperature dependent phase transition. GMO-GMS (75:25 wt%) blend showed a melting (T m ) and crystallization (T c ) points at 42°C and 37°C, respectively indicating the potential of the matrix to act as an 'on-demand' drug release. The matrix released only 35% of the loaded drug slowly in 10 days at 37°C whereas 96% release was obtained at 42°C. A concentration of 0.5% OA-Fe3O4 heated the matrix to 42.3 and 45.5°C within 5 min and 10 min of AMF exposure, respectively. CONCLUSIONS: The in vitro NF release profiles form the monoglycerides matrix containing 0.5% OA-Fe3O4 nanoparticles after AMF activation confirmed the thermo-responsive nature of the matrix that could provide pulsatile drug release 'on-demand'.

Block copolymer cross-linked nanoassemblies improve particle stability and biocompatibility of superparamagnetic iron oxide nanoparticles.

PURPOSE: To develop cross-linked nanoassemblies (CNAs) as carriers for superparamagnetic iron oxide nanoparticles (IONPs). METHODS: Ferric and ferrous ions were co-precipitated inside core-shell type nanoparticles prepared by cross-linking poly(ethylene glycol)-poly(aspartate) block copolymers to prepare CNAs entrapping Fe(3)O(4) IONPs (CNA-IONPs). Particle stability and biocompatibility of CNA-IONPs were characterized in comparison to citrate-coated Fe(3)O(4) IONPs (Citrate-IONPs). RESULTS: CNA-IONPs, approximately 30 nm in diameter, showed no precipitation in water, PBS, or a cell culture medium after 3 or 30 h, at 22, 37, and 43°C, and 1, 2.5, and 5 mg/mL, whereas Citrate-IONPs agglomerated rapidly (> 400 nm) in all aqueous media tested. No cytotoxicity was observed in a mouse brain endothelial-derived cell line (bEnd.3) exposed to CNA-IONPs up to 10 mg/mL for 30 h. Citrate-IONPs (> 0.05 mg/mL) reduced cell viability after 3 h. CNA-IONPs retained the superparamagnetic properties of entrapped IONPs, enhancing T2-weighted magnetic resonance images (MRI) at 0.02 mg/mL, and generating heat at a mild hyperthermic level (40 ~ 42°C) with an alternating magnetic field (AMF). CONCLUSION: Compared to citric acid coating, CNAs with a cross-linked anionic core improved particle stability and biocompatibility of IONPs, which would be beneficial for future MRI and AMF-induced remote hyperthermia applications.

Magnetic Nanocomposites for the Remote Activation of Sulfate Radicals for the Removal of Rhodamine B.

The widespread presence of numerous organic contaminants in water poses a threat to the ecological environment and human health. Magnetic nanocomposites exposed to an alternating magnetic field (AMF) have a unique ability for magnetically mediated energy delivery (MagMED) resulting from the embedded magnetic nanoparticles; this localized energy delivery and associated chemical and thermal effects are a potential method for removing contaminants from water. This work developed a novel magnetic nanocomposite-a polyacrylamide-based hydrogel loaded with iron oxide nanoparticles. For this magnetic nanocomposite, persulfate activation and the contamination removal in water were investigated. Magnetic nanocomposites were exposed to AMF with a model organic contaminant, rhodamine B (RhB) dye, with or without sodium persulfate (SPS). The removal of RhB by the nanocomposite without SPS as a sorbent was found to be proportional to the concentration of magnetic nanoparticles (MNPs) in the nanocomposite. With the addition of SPS, approximately 100% of RhB was removed within 20 min. This removal was attributed primarily to the activation of sulfate radicals, triggered by MNPs, and the localized heating resulted from the MNPs when exposed to AMF. This suggests that this magnetic nanocomposite and an AMF could be a unique environmental remediation technique for hazardous contaminants.

The Impact of Solution Ionic Strength, Hardness, and pH on the Sorption Efficiency of Polychlorinated Biphenyls in Magnetic Nanocomposite Microparticle (MNM) Gels.

Environmental conditions of groundwater and surface water greatly vary as a function of location. Factors such as ionic strength, water hardness, and solution pH can change the physical and chemical properties of the nanocomposites used in remediation and the pollutants of interest. In this work, magnetic nanocomposite microparticle (MNM) gels are used as sorbents for remediation of PCB 126 as model organic contaminant. Three MNM systems are used: curcumin multiacrylate MNMs (CMA MNMs), quercetin multiacrylate MNMs (QMA MNMs), and polyethylene glycol-400-dimethacrylate MNMs (PEG MNMs). The effect of ionic strength, water hardness, and pH were studied on the sorption efficiency of the MNMs for PCB 126 by performing equilibrium binding studies. It is seen that the ionic strength and water hardness have a minimal effect on the MNM gel system sorption of PCB 126. However, a decrease in binding was observed when the pH increased from 6.5 to 8.5, attributed to anion-π interactions between the buffer ions in solution and the PCB molecules as well as with the aromatic rings of the MNM gel systems. Overall, the results indicate that the developed MNM gels can be used as magnetic sorbents for polychlorinated biphenyls in groundwater and surface water remediation, provided that the solution pH is controlled.

Development of Poly(acrylamide)-Based Hydrogel Composites with Powdered Activated Carbon for Controlled Sorption of PFOA and PFOS in Aqueous Systems.

Per- and polyfluoroalkyl substances (PFAS) are anthropogenic compounds developed for various applications; some are connected to adverse health impacts including immunosuppression and higher susceptibility to some cancers. Current PFAS remediation treatments from aqueous sources include granular activated carbon (GAC) adsorption, membrane separation, and anion-exchange resin (AER) removal. Each has specific disadvantages, hence the need for a new and efficient technology. Herein, acrylamide-based hydrogel composites were synthesized with powdered activated carbon (PAC) and characterized to determine their affinity for PFAS. Physicochemical characterization included Fourier-Transform infrared spectroscopy (FTIR) to identify chemical composition, thermogravimetric analysis (TGA) to confirm PAC loading percentage, and aqueous swelling studies to measure the effect of crosslinking density. FTIR showed successful conversion of carbonyl and amine groups, and TGA analysis confirmed the presence of PAC within the network. Surface characterization also confirmed carbon-rich areas within composite networks, and the swelling ratio decreased with increasing crosslinking density. Finally, sorption of PFAS was detected via liquid chromatography with tandem mass spectrometry (LC-MS/MS), with removal efficiencies of up to 98% for perfluorooctanoic sulfonic acid (PFOS) and 96% for perfluorooctanoic acid (PFOA). The developed hydrogel composites exhibited great potential as advanced materials with tunable levers that can increase affinity towards specific compounds in water.

Controlled Release of DNA Binding Anticancer Drugs from Gold Nanoparticles with Near-Infrared Radiation.

Traditional chemotherapies target rapidly developing cells in the human body resulting in harsh side effects including fatigue, immune system suppression, and nausea, among others. Delivery systems to focus the active pharmaceutical ingredients (APIs) to the diseased tissue can diminish the negative side effects while improving treatment outcomes. Gold nanoparticles (AuNP) offer many unique advantages as drug delivery vehicles, including being biologically inert, easily adaptable to various shapes and sizes, able to create a strong Au-thiol bond, and able to generate heat upon the absorption of near-infrared light. To this end, a AuNP delivery vehicle was engineered to load and release two DNA binding anti-cancer drugs, mithramycin and doxorubicin, in a controlled fashion. The drugs were loaded onto the surface of the AuNP with temperature sensitive linkages. The amount of heat generated, and subsequent release of the drugs was controlled by the irradiation time with a near-infrared laser. By modulating the linkage used to load the drugs three different release profiles were able to be achieved, indicating the feasibility of such a system for combinational therapy requiring sequential release of APIs.

Thermoresponsive Cationic Polymers: PFAS Binding Performance under Variable pH, Temperature and Comonomer Composition.

The versatility and unique qualities of thermoresponsive polymeric systems have led to the application of these materials in a multitude of fields. One such field that can significantly benefit from the use of innovative, smart materials is environmental remediation. Of particular significance, multifunctional poly(N-isopropylacrylamide) (PNIPAAm) systems based on PNIPAAm copolymerized with various cationic comonomers have the opportunity to target and attract negatively charged pollutants such as perfluorooctanoic acid (PFOA). The thermoresponsive cationic PNIPAAm systems developed in this work were functionalized with cationic monomers N-[3-(dimethylamino)propyl]acrylamide (DMAPA) and (3-acrylamidopropyl)trimethylammonium chloride (DMAPAQ). The polymers were examined for swelling capacity behavior and PFOA binding potential when exposed to aqueous environments with varying pH and temperature. Comonomer loading percentages had the most significant effect on polymer swelling behavior and temperature responsiveness as compared to aqueous pH. PFOA removal efficiency was greatly improved with the addition of DMAPA and DMAPAQ monomers. Aqueous pH and buffer selection were important factors when examining binding potential of the polymers, as buffered aqueous environments altered polymer PFOA removal quite drastically. The role of temperature on binding potential was not as expected and had no discernible effect on the ability of DMAPAQ polymers to remove PFOA. Overall, the cationic systems show interesting swelling behavior and significant PFOA removal results that can be explored further for potential environmental remediation applications.

Development of branched polyphenolic poly(beta amino esters) to facilitate post-synthesis processing.

Given their versatility and formability, polymers have proven to be a viable platform facilitating a controlled and tuned release for a variety of therapeutic agents. One growing area of polymer drug delivery is polymeric prodrugs, which covalently link active pharmaceutical ingredients to a polymeric form to enhance stability, delivery, and pharmacology. One such class of polymeric prodrugs, poly(beta amino esters) (PßAEs) can be synthesized into crosslinked, or "thermoset," networks which greatly limits their processability. An antioxidant-PßAE polymer prodrug that is soluble in organic solutions would permit enhanced processability, increasing their utility and manufacturability. Curcumin PßAEs were synthesized to be soluble in organic solvents while retaining the release and activity properties. To demonstrate the polymer processability, curcumin PßAEs were further synthesized into nanoparticles and thin films. Control over nanoparticle size and film thickness was established through variance of dope solution concentration and withdrawal speed, respectively. Layering of polymeric films was demonstrated through inkjet printing of thin films. Polymer function was characterized through curcumin release and antioxidant activity. The processing of the polymer had a drastic impact on the curcumin release profiles indicating the polymer degradation was influenced by surface area and porosity of the final product. Previously, release was controlled primarily through the hydrophobicity of the polymer. Here, we demonstrate a novel method for further tuning the degradation by processing the polymer.

Development of temperature-responsive polymeric gels with physical crosslinking due to intermolecular 𝜋-𝜋 interactions.

Poly(N-isopropylacrylamide) PNIPAAm was polymerized with co-monomers containing a biphenyl moiety to create a unique thermoresponsive physically crosslinked system due to the presence of pi-pi interactions between the biphenyl moieties. The biphenyl monomers used were 2-phenylphenol monoacrylate (2PPMA) and 4-phenylphenol monoacrylate (4PPMA). These monomers were utilized to synthesize a set of polymers with biphenyl monomer (2PPMA/4PPMA) content from 2.5 to 7.5 mole percent and with initiator concentrations from 0.1 and 1.0 weight percent. The resulting polymers were characterized by various techniques, such as gel permeation chromatography (GPC), swelling studies and mechanical testing. The decrease in the average molecular weight of the polymers due to the increase in the concentration of initiator was confirmed by GPC results. Swelling studies confirmed the expected temperature dependent swelling properties and explored the impact of the biphenyl comonomers. These studies indicated that with the increase in biphenyl comonomers, the physical crosslinking increases which leads to decrease in the swelling ratio. The results from the mechanical tests also depict the effect of the concentration of biphenyl comonomers. These physically crosslinked polymeric systems with their unique properties have potential applications spanning environmental remediation/sensing, biomedicine, etc.

Poly(curcumin ß-amino ester)-Based Tablet Formulation for a Sustained Release of Curcumin.

Oral drug delivery remains the most common and well tolerated method for drug administration. However, its applicability is often limited due to low drug solubility and stability. One approach to overcome the solubility and stability limitations is the use of amorphous polymeric prodrug formulations, such as poly(ß-amino ester) (PBAE). PBAE hydrogels, which are biodegradable and pH responsive, have shown promising results for the controlled release of drugs by improving the stability and increasing the solubility of these drugs. In this work, we have evaluated the potential use of PBAE prodrugs in an oral tablet formulation, studying their sustained drug release potential and storage stability. Curcumin, a low solubility, low stability antioxidant drug was used as a model compound. Poly(curcumin ß-amino ester) (PCBAE), a crosslinked amorphous network, was synthesized by a previously published method using a commercial diacrylate and a primary diamine, in combination with acrylate-functionalized curcumin. PCBAE-based tablets were made and exhibited a sustained release for 16 h, following the hydrolytic degradation of PCBAE particles into native curcumin. In addition to the release studies, preliminary storage stability was assessed using standard and accelerated stability conditions. As PCBAE degradation is hydrolysis driven, tablet stability was found to be sensitive to moisture.

Demonstration of Hollow Fiber Membrane-Based Enclosed Space Air Remediation for Capture of an Aerosolized Synthetic SARS-CoV-2 Mimic and Pseudovirus Particles.

Reduction of airborne viral particles in enclosed spaces is critical in controlling pandemics. Three different hollow fiber membrane (HFM) modules were investigated for viral aerosol separation in enclosed spaces. Pore structures were characterized by scanning electron microscopy, and air transport properties were measured. Particle removal efficiency was characterized using aerosols generated by a collision atomizer from a defined mixture of synthetic nanoparticles including SARS-CoV-2 mimics (protein-coated 100 nm polystyrene). HFM1 (polyvinylidene fluoride, ~50-1300 nm pores) demonstrated 96.5-100% efficiency for aerosols in the size range of 0.3-3 µm at a flow rate of 18.6 ± 0.3 SLPM (~1650 LMH), whereas HFM2 (polypropylene, ~40 nm pores) and HFM3 (hydrophilized polyether sulfone, ~140-750 nm pores) demonstrated 99.65-100% and 98.8-100% efficiency at flow rates of 19.7 ± 0.3 SLPM (~820 LMH) and 19.4 ± 0.2 SLPM (~4455 LMH), respectively. Additionally, lasting filtration with minimal fouling was demonstrated using ambient aerosols over 2 days. Finally, each module was evaluated with pseudovirus (vesicular stomatitis virus) aerosol, demonstrating 99.3% (HFM1), >99.8% (HFM2), and >99.8% (HFM3) reduction in active pseudovirus titer as a direct measure of viral particle removal. These results quantified the aerosol separation efficiency of HFMs and highlight the need for further development of this technology to aid the fight against airborne viruses and particulate matter concerning human health.