RESUMO
Benzoxazole-linked covalent organic frameworks (BO-COFs), despite their exceptional chemical stability, are still in their infancy. This is primarily because the current prevalent methods require the use of special ortho-hydroxyl-substituted aromatic amines as monomers. Herein, we report an innovative strategy to access BO-COFs directly from imine-linked COFs (Im-COFs) without pre-embedded OH groups, using a two-step sequential oxidation/cyclization process. The two-step process included the oxidation of Im-COFs into amide-linked COFs, followed by a copper-catalyzed oxidative cyclization. Five representative BO-COFs were synthesized with retained crystallinity and high oxidization efficiency, offering the potential to convert a significant portion of Im-COFs into BO-COFs. The structural advantages of the newly designed BO-COFs were demonstrated through their application to photocatalytic organic transformations.
RESUMO
Covalent organic frameworks (COFs) have emerged as efficient heterogeneous photocatalysts for a wide range of relatively simple organic reactions, whereas their application in complex organic transformations, like site-selective functionalization of unactivated C-H bonds, is underexplored, which can be mainly attributed to the lack of highly active organophotocatalytic cores. Herein through bonding oxygen atoms at the N-terminus of quinolines in nonsubstituted quinoline-linked COFs (NQ-COFs), we successfully realized the embedding of active hydrogen atom transfer (HAT) moieties into the skeleton of COFs. This novel designed COF (NQ-COFE5 -O), serving as both an excellent photosensitizer and HAT catalyst, exhibited much higher efficiency in C-H functionalization than the corresponding NQ-COFE5 . Specially, we evaluated the photocatalytic performance of NQ-COFE5 -O on ten different substrates, including quinolines, benzothiazole, and benzoxazole, all of which were transferred to desired products in moderate to high yields (up to 93 %). Furthermore, the as-synthesized NQ-COFE5 -O displayed excellent photostability and could be reused with negligible loss of activity for five catalytic cycles.
RESUMO
Exploring new routes to lock the dynamic C=N bonds in imine-linked covalent organic frameworks (COFs) is highly desired for enhancing their stability and functionality. Herein, a novel C=N bridge locking strategy via rhodium-catalyzed [4+2] annulation is developed to construct nonsubstituted quinoline-linked COFs (NQ-COFs). The notable feature of this strategy includes high C=N conversion efficiency, oxidant-free, and generality for synthesis of a variety of NQ-COFs with high chemical stability. Particularly, after post-synthetic modification, the crystallinity, topology, and porosity of pristine imine-linked COFs are well retained. When used as photocatalysts, NQ-COFs display better visible light absorption and carriers' separation efficiency due to enhanced in-plane π conjugation ability, as well as more facile generation of superoxide anion radicals than their counterparts, thus leading to efficient synthesis of 2,4,6-tris(aryl)pyridines, benzimidazole, and sulfoxide derivatives.
RESUMO
Developing unique single atoms as active sites is vitally important to boosting the efficiency of photocatalytic CO2 reduction, but directly atomizing metal particles and simultaneously adjusting the configuration of individual atoms remain challenging. Herein, we demonstrate a facile strategy at a relatively low temperature (500 °C) to access the in situ metal atomization and coordination adjustment via the thermo-driven gaseous acid. Using this strategy, the pyrolytic gaseous acid (HCl) from NH4Cl could downsize the large metal particles into corresponding ions, which subsequently anchored onto the surface defects of a nitrogen-rich carbon (NC) matrix. Additionally, the low-temperature treatment-induced CâO motifs within the interlayer of NC could bond with the discrete Fe sites in a perpendicular direction and finally create stabilized Fe-N4O species with high valence status (Fe3+) on the shallow surface of the NC matrix. It was found that the Fe-N4O species can achieve a highly efficient CO2 conversion when accepting energetic electrons from both homogeneous and heterogeneous photocatalysts. The optimized sample achieves a maximum turnover number (TON) of 1494 within 1 h in CO generation with a high selectivity of 86.7% as well as excellent stability. Experimental and theoretical results unravel that high valence Fe sites in Fe-N4O species can promote the adsorption of CO2 and lower the formation barrier of key intermediate COOH* compared with the traditional Fe-N4 moiety with lower chemical valence. Our discovery provides new points of view in the construction of more efficient single-atom cocatalysts by considering the optimization of the atomic configuration for high-performance CO2 photoreduction.
RESUMO
Preventing the aggregation of nanosized electrode materials is a key point to fully utilize the advantage of the high capacity. In this work, a facile and low-cost surface solvation treatment is developed to synthesize Fe2 VO4 hierarchical porous microparticles, which efficiently prevents the aggregation of the Fe2 VO4 primary nanoparticles. The reaction between alcohol molecules and surface hydroxy groups is confirmed by density functional theory calculations and Fourier transform infrared spectroscopy. The electrochemical mechanism of Fe2 VO4 as lithium-ion battery anode is characterized by in situ X-ray diffraction for the first time. This electrode material is capable of delivering a high reversible discharge capacity of 799 mA h g-1 at 0.5 A g-1 with a high initial coulombic efficiency of 79%, and the capacity retention is 78% after 500 cycles. Moreover, a remarkable reversible discharge capacity of 679 mA h g-1 is achieved at 5 A g-1 . Furthermore, when tested as sodium-ion battery anode, a high reversible capacity of 382 mA h g-1 can be delivered at the current density of 1 A g-1 , which still retains at 229 mA h g-1 after 1000 cycles. The superior electrochemical performance makes it a potential anode material for high-rate and long-life lithium/sodium-ion batteries.
RESUMO
Donor-acceptor (D-A) conjugated polymers have proved to be desired candidates to couple with inorganic semiconductors for enhanced photocatalytic activity. Herein, the matched energy levels between polymer BFB and TiO2 make them form BFB-TiO2 composites with moderate photocatalytic H2 evolution rate (HER). To further enhance the interfacial interaction, BFB was modified with a carboxylic acid end group, which reacted with surface OH of TiO2 to form an ester bond. As a result, the functionalized BFBA-TiO2 composites exhibited superior photocatalytic activity. Especially, HER of 4 % BFBA-TiO2 can reach up to 228.2â µmol h-1 under visible light irradiation (λ>420â nm), which is about 2.02â times higher than that of BFB-TiO2 . The enhanced photocatalytic activity originated from the formed ester bond between polymer and TiO2 , and photogenerated electrons injection from lowest unoccupied molecular orbital (LUMO) of the exited polymer to conduction band of TiO2 were accelerated. Therefore, based on an intermolecular interaction mechanism, more suitable D-A conjugated polymers with anchoring groups could be designed to couple with other semiconductors for enhancing photocatalytic activity.
RESUMO
Sensitizers are responsible for the light harvesting and the charge injection in dye-sensitized solar cells (DSSCs). A fast dye-regeneration process is necessary to obtain highly efficient DSSC devices. Herein, dye-regeneration rates of two DSSC device types, that is, the reduction of immediately formed photo-oxidized sensitizers (ruthenium complex C106TBA and porphyrin LD14, k(ox)') by iodide ions (I(-)) and [Co(bpy)3](2+), and the oxidation of formed photo-reduced sensitizers (organic dye P1, k(re)') by triiodide ions (I3(-)) and the disulfide dimer (T2) are investigated by scanning electrochemical microscopy (SECM). We provide a thorough experimental verification of the feedback mode to compare the kinetics for dye-regeneration by using the above mentioned mediators. The charge recombination at the dye/semiconductor/electrolyte interface is further investigated by SECM. A theoretical model is applied to interpret the current response at the tip under short-circuit conditions, providing important information on factors that govern the dynamics of dye-regeneration onto the dye-sensitized heterojunction.
RESUMO
Here we report on an experimental study of an electrocatalyst for the hydrogen evolution reaction (HER) based on cobalt porphyrin and electrochemically reduced graphene oxide (ERGO) functional multilayer films, which are prepared by the alternating layer-by-layer (LBL) assembly of negatively charged graphene oxide (GO) and positively charged [tetrakis (N-methylpyridyl) porphyrinato] cobalt (CoTMPyP) in combination with an electrochemical reduction procedure. The resulting [ERGO@CoTMPyP]n multilayer films display relatively high electrocatalytic activity and superior stability toward HER in alkaline media. Electrochemical studies indicate that CoTMPyP in the multilayer films is the active catalyst for the reduction of protons to dihydrogen.
RESUMO
Inspired by the bidentate coordination chemistry of metal ions, we incorporated hydroxyl (OH) and methoxy (OMe) groups into the skeleton of imine-linked COFs to improve their protonation ability via intramolecular hydrogen bonds (O-Hâ¯NîC). In comparison with the pristine COFs possessing monodentate nitrogen coordination sites, OH and OMe functionalized COFs with (N,O)-bidentate chelating sites exhibited up to 13.8 times faster photocatalytic hydrogen evolution rates (HERs).
RESUMO
Irreversible locking of imine linkages into stable linkages represents a promising strategy to improve the robustness and functionality of covalent organic frameworks (COFs). We report, for the first time, a multi-component one-pot reaction (OPR) for imine annulation to construct highly stable nonsubstituted quinoline-bridged COFs (NQ-COFs), and that equilibrium regulation of reversible/irreversible cascade reactions by addition of MgSO4 desiccant is crucial to achieve high conversion efficiency and crystallinity. The higher long-range order and surface area of NQ-COFs synthesized by this OPR than those of the reported two-step post-synthetic modification (PSM) facilitate charge carrier transfer and photogeneration ability of superoxide radicals (O2Ë-), which makes these NQ-COFs more efficient photocatalysts for O2Ë- mediated synthesis of 2-benzimidazole derivatives. The general applicability of this synthetic strategy is demonstrated by fabricating 12 other crystalline NQ-COFs with a diversity of topologies and functional groups.
RESUMO
With the surging development of flexible wearable and stretchable electronic devices, flexible energy-storage devices with excellent electrochemical properties are in great demand. Herein, a flexible Zn-ion battery comprised by hydrated zinc vanadium oxide/carbon cloth (ZnVOH/CC) as the cathode is developed, and it shows a high energy density, superior lifespan, and good safety. ZnVOH/CC is obtained by the in situ transformation of hydrated vanadium oxide/carbon cloth (VOH/CC) by an electrochemical method, and the intercalation pseudocapacitive reaction mechanism is discovered for ZnVOH/CC. The co-insertion/deinsertion of H+/Zn2+ is observed; the H+ insertion dominates in the initial discharge stage and the high-rate electrochemical process, while Zn2+ insertion dominates the following discharge stage and the low-rate electrochemical procedure. An ultrastable reversible capacity of 135 mAh g-1 at 20 A g-1 is obtained after 5000 cycles without capacity fading. Moreover, the as-assembled flexible zinc-ion battery can operate normally under rolled, folded, and punched conditions with superior safety. It is capable to deliver a high discharge capacity of 184 mAh g-1 at 10 A g-1 after 170 cycles. This work paves a new way for designing low-cost, safe, and quick-charging energy-storage devices for flexible electronics.
RESUMO
Binary metal oxides are potential anode materials for lithium-ion storage due to their high theoretical specific capacities. However, the practical applications of metal oxides are limited due to their large volume changes and sluggish reaction kinetics. Herein, carbon coated Fe2(MoO4)3 nanosheets are prepared via a simple method, adopting urea as the template and carbon source. The carbon coating on the surface helps to elevate the conductivity of the active material and maintain structural integrity during the lithium storage process. Combining this with a catalytic effect from the generated Fe, leading to the reversible formation of a solid electrolyte interface layer, a high initial coulombic efficiency (>87%) can be obtained. Based on this, the carbon coated Fe2(MoO4)3 nanosheets show excellent rate capability (a reversible discharge capacity of 983 mA h g-1 at 5 A g-1) and stable cycling performance (1376 mA h g-1 after 250 cycles at 0.5 A g-1 and 864 mA h g-1 after 500 cycles at 2 A g-1). This simple in situ carbonization and template method using urea provides a facile way to optimize electrode materials for next-generation energy storage devices.
RESUMO
NiMo based materials have been widely recognized as the most promising alternatives to noble Pt electrocatalysts used in alkaline electrolytes for the hydrogen evolution reaction. However, it is difficult to construct a nanostructure, especially 1D morphology, for NiMo materials via an electrochemical method. Herein, a novel Li electrochemical tuning method, for the first time, is introduced to synthesize 1D NiMo nanowires by insertion of lithium ions into parent NiMoO4 nanorods. The as-prepared NiMo catalyst exhibits high HER activity in 1 M KOH, in terms of low overpotential (73 mV) at a current density of 10 mA cm-2 and a small Tafel slope (37.2 mV dec-1) and charge transfer resistance (11.3 Ω). Furthermore, no decay in catalytic performance is observed for this material when it is operated at -0.125 V (vs. RHE) for 1250 min and a high Faraday efficiency (96%) is achieved. The high activity of NiMo is ascribed to the synergistic interplay between Ni and Mo and its unique nanostructure, which can expose more active sites and facilitate the mass transfer and hydrogen bubble release.
RESUMO
Efficient hydrogen production by a photovoltaic-electrolysis cell (PV-EC) system requires a low electrolyzer overpotential and a high coupling efficiency between both the components. Herein, Ni5 P4 is proposed as a cost-effective bifunctional electrocatalyst for hydrogen evolution and hydrazine oxidation in a reformed electrolyzer. Experiments indicate that the electrolytic overpotential could be significantly reduced by replacing the oxygen evolution reaction with the hydrazine oxidation reaction at the anode. Furthermore, a scenario for hydrogen production is demonstrated by utilizing a stable and low-cost perovskite solar cell (PSC) with a carbon back electrode to drive a reformed electrolyzer. Importantly, a single PSC can drive three reformed electrolyzers in series for hydrogen production by carefully matching the operating point of the electrolyzer with the maximum power point of the photovoltaic device, thereby, yielding a H2 evolution rate of 1.77â mg h-1 for the whole PV-EC system. This can be a potential starting point for hydrogen production using a single PSC-driven electrolysis system.
RESUMO
Mass production of hydrogen by electrolysis of water largely hinges on the development of highly efficient and economical electrocatalysts for hydrogen evolution reaction (HER). Though having the merits of high earth abundance, easy availability, and tunable composition, transition-metal oxides are usually deemed as poor electrocatalysts for HER. Herein, we demonstrate that doping ß-CoMoO4 nanoplates with phosphorus can turn them into active electrocatalysts for HER. Theoretical calculation and experimental studies unravel that enhanced electrical conductivity and optimized hydrogen adsorption free energy are major causes for the improvement of intrinsic activity. As a result, only an overpotential of 138 mV is required to drive hydrogen evolving at a current density of 10 mA cm-2 in 1 M KOH for P-doped ß-CoMoO4, which outstrips many recently reported transition-metal oxides and is just slightly inferior to commercial Pt/C. This work opens a new route to tune the HER performance of transition-metal oxides.
RESUMO
It is highly desirable to develop efficient and low-cost catalysts to minimize the overpotential of the hydrogen evolution reaction (HER) for large-scale hydrogen production from electrochemical water splitting. Doping a foreign element into the host catalysts has been proposed as an effective approach to optimize the electronic characteristics of catalysts and thus improve their electrocatalytic performance. Herein we, for the first time, report vanadium-doped CoP on self-supported conductive carbon cloth (V-CoP/CC) as a robust HER electrocatalyst, which achieves ultra-low overpotentials of 71, 123 and 47 mV to afford a current density of 10 mA cm-2 in 1 M KOH, 1 M PBS and 0.5 M H2SO4 media, respectively. Meanwhile, the V-CoP/CC electrode exhibits a small Tafel slope and superior long-term stability over a wide pH range. Detailed characterizations reveal that the modulation of the electronic structure contributes to the superior HER performance of V-CoP/CC. We believe that doping engineering opens up new opportunities to improve the HER catalytic activity of transition metal phosphides through regulating their physicochemical and electrochemical properties.
RESUMO
Developing high-active and low-cost bifunctional materials for catalyzing the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) holds a pivotal role in water splitting. Therefore, we present a new strategy to form NiS/Ni2P heterostructures. The as-obtained NiS/Ni2P/carbon cloth (CC) requires overpotentials of 111 mV for the HER and 265 mV for the OER to reach a current density of 20 mA cm-2, outperforming their counterparts such as NiS and Ni2P under the same conditions. Additionally, the NiS/Ni2P/CC electrode requires a 1.67 V cell voltage to deliver 10 mA cm-2 in a two-electrode electrolysis system, which is comparable to the cell using the benchmark Pt/C||RuO2 electrode. Detailed characterizations reveal that strong electronic interactions between NiS and Ni2P, abundant active sites, and smaller charge-transfer resistance contribute to the improved HER and OER activity.
RESUMO
Redox metal ions play the crucial role in versatile advanced oxidation technologies, in which controlling the active species formation through catalyst design is one of the key challenges in oxidant utilization. This work describes an example of different active species formations in CuO-mediated degradation just because of supporting material differences. Although three CuO catalysts were prepared by similar procedures, it was found that CuO-MgO catalyst demonstrated high efficiency in phenol degradation with bicarbonate activated H2O2, in which the superoxide radical is crucial, while hydroxyl radical and singlet oxygen are ignorable. For the CuO-MgO-Al2O3 and CuO-Al2O3 catalysts, the degradation proceeds by popular hydroxyl radical based process, however, the efficiency was poor. The EPR experiments also confirmed the absence of hydroxyl radical in CuO-MgO system but its presence in CuO-MgO-Al2O3 and CuO-Al2O3 system. The high catalytic efficiency with ignorable hydroxyl radical in the CuO-MgO system leads us to propose that an alternative Cu(III) species dominates the degradation. The basic MgO support may facilitate the formation of the Cu(III) species, whereas the neutral MgO-Al2O3 and acidic Al2O3 supports are unable to stabilize the high valent Cu(III) species, leading to the common hydroxyl radical mechanism with low efficiency of H2O2 in alkaline conditions.
RESUMO
This work reports on an experimental investigation of Co9S8 hollow spheres with excellent interfacial charge transfer ability for the electrochemical detection of hydrogen peroxide and glucose in alkaline environment. The result reveals that the Co9S8 hollow spheres exhibit excellent electrocatalytic activity for the reduction of hydrogen peroxide. An electrochemical sensor based on Co9S8 can be further realized, exhibiting a linear response range from 0.0001 to 11.11mM for hydrogen peroxide with a low detection limit of 0.02µM, and a high sensitivity of 267.2mA mol(-1)cm(-2), which is one of the highest values among the non-enzymatic sensors based on inorganic oxides. The Co9S8 sensor also exhibits good response toward glucose at different concentrations. These results demonstrate that the as-prepared Co9S8 hollow spheres have a potential application in the development of sensors for enzyme-free detection of H2O2 and glucose.
RESUMO
In the present work, we report on an experimental study of flexible nanocomposite film for electrochemical detection of hydrogen peroxide (H2O2) based on bacterial cellulose (BC) and multi-walled carbon nanotubes (MWCNTs) in combination with microperoxidase-11 (MP-11). MWCNTs are used to functionalize BC and provide a flexible conductive film. On the other hand, BC can improve MWCNTs׳ biocompatibility. The investigation shows that MP-11 immobilized on the flexible film of MWCNTs-BC can easily present a pair of well-defined and quasi-reversible redox peaks, revealing a direct electrochemistry of MP-11 on the nanocomposite film. The apparent heterogeneous electron-transfer rate constant ks is estimated to be 11.5s(-1). The resulting flexible electrode presents appreciated catalytic properties for electrochemical detection of H2O2, comparing to traditional electrodes (such as gold, glassy carbon electrode) modified with MP-11. The proposed biosensor exhibits a low detection limit of 0.1 µM (at a signal-to-noise ratio of 3) with a linear range of 0.1-257.6 µM, and acquires a satisfactory stability.