An Unconventional Hydrofullerene C66H4 with Symmetric Heptagons Retrieved in Low-Pressure Combustion.

The combustion has long been applied for industrial synthesis of carbon materials such as fullerenes as well as carbon particles (known as carbon black), but the components and structures of the carbon soot are far from being clarified. Herein, we retrieve an unprecedented hydrofullerene C66H4 from a soot of a low-pressure combustion of benzene-acetylene-oxygen. Unambiguously characterized by single-crystal X-ray diffraction, the C66H4 renders a nonclassical geometry incorporating two heptagons and two pairs of fused pentagons in a C2 v symmetry. The common vertexes of the fused pentagons are bonded with four hydrogen atoms to convert the hydrogen-linking carbon atoms from sp2 to sp3 hybridization, which together with the adjacent heptagons essentially releases the sp2-bond strains on the abutting-pentagon sites of the diheptagonal fused pentagon C66 (dihept-C66). DFT computations suggest the possibility for an in situ hydrogenation process leading to stabilization of the dihept-C66. In addition, the experiments have been carried out to study heptagon-dependent properties of dihept-C66H4, indicating the key responsibility of the heptagon for changing hydrocarbon activity and electronic properties. The present work with the unprecedented double-heptagon-containing hydrofullerene successfully isolated and identified as one of the low-pressure combustion products shows that the heptagon is a new building block for constructing fullerene products in addition to pentagons and hexagons in low-pressure combustion systems.

General One-step Synthesis of Symmetrical or Unsymmetrical 1,4-Di(organo)fullerenes from Organo(hydro)fullerenes through Direct Oxidative Arylation.

A general one-step synthesis of symmetrical or unsymmetrical 1,4-di(organo)fullerenes from organo(hydro)fullerenes (RC60H) is realized by direct oxidative arylation. The new combination of catalytic trifluoromethanesulfonic acid (TfOH) and stoichiometric o-chloranil is the first to be used to directly generate an R-C60+ intermediate from common RC60H. Unexpectedly, the in situ generated R-C60+ intermediate is shown to be quite stable in whole 13C NMR spectroscopy characterization in the absence of cation quenching reagents. Because the direct oxidation of common RC60H to form the corresponding R-C60+ has never been realized, the present combination of TfOH and o-chloranil solves the challenges associated with the formation of stable RC60+ cations from common RC60H without any coordination of an R group.

Double Negatively Curved C70 Growth through a Heptagon-Involving Pathway.

All previously reported C70 isomers have positive curvature and contain 12 pentagons in addition to hexagons. Herein, we report a new C70 species with two negatively curved heptagon moieties and 14 pentagons. This unconventional heptafullerene[70] containing two symmetric heptagons, referred to as dihept-C70 , grows in the carbon arc by a theoretically supported pathway in which the carbon cluster of a previously reported C66 species undergoes successive C2 insertion via a known heptafullerene[68] intermediate with low energy barriers. As identified by X-ray crystallography, the occurrence of heptagons facilitates a reduction in the angle of the π-orbital axis vector in the fused pentagons to stabilize dihept-C70 . Chlorination at the intersection of a heptagon and two adjacent pentagons can greatly enlarge the HOMO-LUMO gap, which makes dihept-C70 Cl6 isolable by chromatography. The synthesis of dihept-C70 Cl6 offers precious clues with respect to the fullerene formation mechanism in the carbon-clustering process.

Formation of Curvature Subunit of Carbon in Combustion.

Curvature prevalently exists in the world of carbon materials (e.g., fullerenes, buckyl bowls, carbon nanotubes, and onions), but traditional C2-addition mechanisms fail to elucidate the mechanism responsible for the formation of carbon curvature starting from a pentagonal carbon ring in currently available chemical-physical processes such as combustion. Here, we show a complete series of nascent pentagon-incorporating C5-C18 that are online produced in the flame of acetylene-cyclopentadiene-oxygen and in situ captured by C60 or trapped as polycyclic aromatic hydrocarbons for clarifying the growth of the curved subunit of C20H10. A mechanism regarding C1-substitution and C2-addition has been proposed for understanding the formation of curvature in carbon materials, as exemplified by the typical curved molecule containing a single pentagon completely surrounded by five hexagons. The present mechanism, supported by the intermediates characterized by X-ray crystallography as well as NMR, has been experimentally validated for the rational synthesis of curved molecule in the commercially useful combustion process.

Tailorable PC71 BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High-Performance Polymer Solar Cells.

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC71 BM (phenyl-C71 -butyric acid methyl ester) usually has a "random" composition of mixed regioisomers or stereoisomers. Here PC71 BM has been isolated into three typical isomers, α-, ß1 - and ß2 -PC71 BM, to establish the isomer-dependent photovoltaic performance on changing the ternary composition of α-, ß1 - and ß2 -PC71 BM. Mixing the isomers in a ratio of α/ß1 /ß2 =8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC71 BM as photoactive layer (PTB7=poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]]). The three typical PC71 BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average-performing PCE of 1.28-7.44 % due to diverse self-aggregation of individual or mixed PC71 BM isomers in the otherwise same polymer solar cells.

Regioselective Oxidation of Fused-Pentagon Chlorofullerenes.

Two monoxides of typical smaller chlorofullerenes, (#271)C50Cl10O and (#913)C56Cl10O, featured with double-fused-pentagons, were synthesized to demonstrate further regioselective functionalization of non-IPR (IPR = isolated pentagon rule) chlorofullerenes. Both non-IPR chlorofullerene oxides exhibit an epoxy structure at the ortho-site of fused pentagons. In terms of the geometrical analysis and theoretical calculations, the principles for regioselective epoxy oxidation of non-IPR chlorofullerenes are revealed to follow both "fused-pentagon ortho-site" and "olefinic bond" rules, which are valuable for prediction of oxidation of non-IPR chlorofullerenes.

Capturing the Fused-Pentagon C74 by Stepwise Chlorination.

As a bridge to connect medium-sized fullerenes, fused-pentagon C74 is still missing heretofore. Of 14 246 possible isomers, the first fused-pentagon C74 with the Fowler-Manolopoulos code of 14 049 was stabilized as C74Cl10 in the chlorine-involving carbon arc. The structure of C74Cl10 was identified by X-ray crystallography. The stabilization of pristine fused-pentagon C74 by stepwise chlorination was clarified in both theoretical simulation with density functional theory calculations and experimental fragmentation with multistage mass spectrometry.

Crystallographic snapshots of the interplay between reactive guest and host molecules in a porous coordination polymer: stereochemical coupling and feedback mechanism of three photoactive centers triggered by UV-induced isomerization, dimerization, and polymerization reactions.

We carried out photopolymerization by [2 + 2] dimerization of a photoreactive guest molecule in the channels of a photoreactive porous coordination polymer. The photoreactions of the guest and two host ligands were monitored by single-crystal X-ray crystallography, providing snapshots of the interplay between the reactive centers. By correlating the structures of these three photocenters, a strong synergism was discovered among three reaction (quasi)equilibria and three types of photochemical reactions (isomerization, dimerization, and polymerization). This result indicates a strong coupling and feedback mechanism among the photocenters moderated by the coordination backbone.

Co-ligand and solvent effects on the spin-crossover behaviors of PtS-type porous coordination polymers.

In our previous work ( Chen , X.-Y. ; Chem. Commun. 2013 , 49 , 10977 - 10979 ), we have reported the crystal structure and spin-crossover properties of a compound [Fe(NCS)2(tppm)]·S [1·S, tppm = 4,4',4″,4‴-tetrakis(4-pyridylethen-2-yl)tetraphenylmethane, S = 5CH3OH·2CH2Cl2]. Here, its analogues [Fe(X)2(tppm)]·S [X = NCSe(-), NCBH3(-), and N(CN)2(-) for compounds 2·S, 3·S, and 4·S, respectively] have been synthesized and characterized by variable-temperature X-ray diffraction and magnetic measurements. The crystal structure analyses of 2·S and 3·S reveal that both compounds possess the same topologic framework (PtS-type) building from the tetrahedral ligand tppm and planar unit FeX2; the framework is two-fold self-interpenetrated to achieve one-dimensional open channels occupied by solvent molecules. Powder X-ray diffraction study indicates the same crystal structure for 4. The average values of Fe-N distances observed, respectively, at 100, 155, and 220 K for the Fe1/Fe2 centers are 1.969/2.011, 1.970/2.052, and 2.098/2.136 Å for 2·S, whereas those at 110, 175, and 220 K are 1.972/2.013, 1.974/2.056, and 2.100/2.150 Å for 3·S, indicating the presence of a two-step spin crossover in both compounds. Temperature-dependent magnetic susceptibilities (χMT) confirm the two-step spin-crossover behavior at 124 and 200 K in 2·S, 151 and 225 K in 3·S, and 51 and 126 K in 4·S, respectively. The frameworks of 2-4 are reproducible upon solvent exchange and thereafter undergo solvent-dependent spin-crossover behaviors.

Solvothermal synthesis of four polyoxometalate-based coordination polymers including diverse Ag(I)···π interactions.

Four 3D POM-based silver coordination polymers, namely, [Ag17(ptz)11(PW12O40)2]n (1), [Ag17(ptz)11(PMo12O40)2]n (2), [Ag12(ptz)6(CN)2(SiW12O40)]n (3), and [Ag19(ptz)8(H2ptz)(H3ptz)(AgP5W30O110)·7H2O]n (4), have been obtained by solvothermal reaction of AgNO3 and 5-phenyl-1H-tetrazole (Hptz) ligand in the presence of four types of polyoxometalates. Structural analysis shows that four types of Ag(I)···π interactions, m-η(1), m/p-η(2), o/m-η(2), and o/m/p-η(3), were observed in compounds 1-4, depending on the polyoxometalates used. The in situ generated CN(-) ion in compound 3 shows unprecedented mixed σ and π bonding modes, similar to the C2(2-) ion in well-studied silver acetylides. For 4, the Na(+) ion in the Preyssler heteropolyoxoanion, [NaP5W30O110](14-), was exchanged by Ag(I) under solvothermal conditions, generating a novel [AgP5W30O110](14-) anion. In addition, the photoluminescence behavior of 1-4 was also investigated.

Transition from one-dimensional water to ferroelectric ice within a supramolecular architecture.

Ferroelectric materials are characterized by spontaneous electric polarization that can be reversed by inverting an external electric field. Owing to their unique properties, ferroelectric materials have found broad applications in microelectronics, computers, and transducers. Water molecules are dipolar and thus ferroelectric alignment of water molecules is conceivable when water freezes into special forms of ice. Although the ferroelectric ice XI has been proposed to exist on Uranus, Neptune, or Pluto, evidence of a fully proton-ordered ferroelectric ice is still elusive. To date, existence of ferroelectric ice with partial ferroelectric alignment has been demonstrated only in thin films of ice grown on platinum surfaces or within microdomains of alkali-hydroxide doped ice I. Here we report a unique structure of quasi-one-dimensional (H(2)O)(12n) wire confined to a 3D supramolecular architecture of H(4)CDTA, trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid; 4,4'-bpy, 4,4'-bipyridine). In stark contrast to the bulk, this 1D water wire not only exhibits enormous dielectric anomalies at approximately 175 and 277 K, respectively, but also undergoes a spontaneous transition between "1D liquid" and "1D ferroelectric ice" at approximately 277 K. Hitherto unrevealed properties of the 1D water wire will be valuable to the understanding of anomalous properties of water and synthesis of novel ferroelectric materials.

Synthesis of long-sought C66 with exohedral stabilization.

Previously reported fused-pentagon fullerenes stabilized by exohedral derivatization do not share the same cage with those stabilized by endohedral encapsulation. Herein we report the crystallographic identification of (#4348)C66Cl10, which has the same cage as that of previously reported Sc2@C66. According to the geometrical data of (#4348)C66Cl10, both strain relief (at the fused pentagons) and local aromaticity (on the remaining sp(2)-hybrided carbon framework) contribute to the exohedral stabilization of this long-sought 66 carbon atom cage.

Probing hydrogen bond energies by mass spectrometry.

Mass spectrometry with desorption electrospray ionization (DESI) is demonstrated to be useful for probing the strength of hydrogen bonding, exemplified by various complexes of benzothiazoles and carboxylic acids in the solid state. Efficiencies for fragmentation of the complexes, quantified by collision-induced dissociation (CID) technology, correspond well with energies of the hydrogen bonds of O-H···N and N-H···O bridging each pair of benzothiazole and carboxylic acid. Linear correlations (with correlation factors of 0.8953 and 0.9928) have been established for the calibration curves of normalized collision energy at 100% fragmentation rate vs the length between donor and acceptor (in the hydrogen bond of O-H···N) as well as the slope of the fragmentation efficiency curve vs the average length difference between O-H···N and N-H···O in the complex. The mechanism responsible for determination of the hydrogen bonds is proposed on the basis of the experiments starting from the mixtures of the complexes as well as labeling with deuterium. As a complement of previously available methods (e.g., X-ray diffraction analysis), expectably, the proposed mass spectrometric method seems to be versatile for probing hydrogen bond energies.

Unidirectional charge transfer in di-cobalt valence tautomeric compound finely tuned by ancillary ligand.

A dinuclear valence tautomeric compound containing a cationic structure with crystallographically distinguishable hs-Co(II) and ls-Co(III) centers undergoes unidirectional charge transfer.

Four coordination polymers based on identical eight-connected heptanuclear clusters: spin canting, spin glass, antiferromagnetism, and gas adsorption.

Four 3D coordination polymers, [Co7(OH)4(H2O)2(ina)4(ip)3]·10H2O (1·10H2O, ina = isonicotinate, ip = isophthalate), [Ni7(OH)4(H2O)2(ina)4(ip)3]·10H2O (2·10H2O), [Co7(OH)4(H2O)2(ina)4(pip)3]·5H2O (3·5H2O, pip = 5-phenyl-isophthalate), and [Ni7(OH)4(H2O)2(ina)4(pip)3]·5H2O (4·5H2O), respectively, were hydrothermally synthesized. They crystallized in the orthorhombic space group Pba2 for 1·10H2O and 2·10H2O and monoclinic space group P2/n for 3·5H2O and 4·5H2O, respectively, and were constructed with the identical 8-connected heptanuclear {M7(OH)4} (M = Co(II) or Ni(II)) clusters, possessing uninodal hexagonal primitive net with the point symbol {3(6)·4(18)·5(3)·6}. The four coordination polymers showed dominant antiferromangetic properties, in which 1·10H2O shows spin-canted behavior and 2·10H2O exhibits the coexistence of spin canting and spin glass. Meanwhile, the activated polymers 1 and 2 possessed permanent porosity, displaying relatively large H2 uptake capacity (77 K, 1 atm) of 114 and 133 cm(3) g(-1), and CO2 uptake capacity (273 K, 1 atm) of 65.8 and 73.3 cm(3) g(-1), for 1 and 2, respectively.

Facile and straightforward synthesis of superparamagnetic reduced graphene oxide-Fe3O4 hybrid composite by a solvothermal reaction.

A superparamagnetic reduced graphene oxide-Fe(3)O(4) hybrid composite (rGO-Fe(3)O(4)) was prepared via a facile and straightforward method through the solvothermal reaction of iron (III) acetylacetonate (Fe(acac)(3)) and graphene oxide (GO) in ethylenediamine (EDA) and water. By this method, chemical reduction of GO as well as the formation of Fe(3)O(4) nanoparticles (NPs) can be achieved in one step. The Fe(3)O(4) NPs are firmly deposited on the surfaces of rGO, avoiding their reassembly to graphite. The rGO sheets prevent the agglomeration of Fe(3)O(4) NPs and enable a uniform dispersion of these metal oxide particles. The size distribution and coverage density of Fe(3)O(4) NPs deposited on rGO can be controlled by varying the initial mass ratio of GO and iron precursor, Fe(acac)(3). With an initial mass ratio of GO and Fe(acac)(3) of 5:5, the surfaces of rGO sheets are densely covered by spherical Fe(3)O(4) NPs with an average size of 19.9 nm. The magnetic-functionalized rGO hybrid exhibits a good magnetic property and the specific saturation magnetization (M(s)) is 13.2 emu g(-1). The adsorption test of methylene blue from aqueous solution demonstrates the potential application of this rGO-Fe(3)O(4) hybrid composite in removing organic dyes from polluted water.

Polymorphism in spin-crossover systems.

The occurrence of spin-crossover (SCO) highly depends on external influences, i.e. temperature, pressure, light irradiation or magnetic field, this electronic switching phenomenon is accompanied by drastic changes in magnetic and optical properties, dielectric constants, colour and structures. Thus, SCO materials are particularly attractive for potential applications in molecular sensing, switching, data storage, display, and other electronic devices at nanometric scale. Polymorphism is widely encountered in the studies of crystallization, phase transition, materials synthesis, biomineralization, and in the manufacture of drugs. Because different crystal forms of the same substance can possess very different properties and behave as different materials, so they are particularly meaningful for investigating SCO phenomena. Studying polymorphism of SCO compounds is therefore important for better understanding the structural factors contributing to spin transition and the structure-function relationship. This critical review is aimed to provide general readers with a comprehensive view of polymorphism in SCO systems. The article is generally structured according to specific metal ions and the dimensionality of compounds in the field. This paper is addressed to readers who are interested in multifunctional materials and tuning magnetic properties through supramolecular chemistry principles (129 references).

High-nuclearity 3d-4f clusters as enhanced magnetic coolers and molecular magnets.

Four 52-metal-ion 3d-4f cluster complexes featuring a common core of Ln(42)M(10) (Ln = Gd(3+), Dy(3+); M = Co(2+/3+), Ni(2+)) were obtained through self-assembly of the metal ions templated by mixed anions (ClO(4)(-) and CO(3)(2-)). Magnetic studies revealed that the Gd(42)Co(10) and Gd(42)Ni(10) clusters exhibit the largest magnetocaloric effect (MCE) among any known 3d-4f complexes. Replacement of Gd(3+) ions with anisotropic Dy(3+) ions caused significant changes in the magnetic behavior of the clusters; both Dy(42)Co(10) and Dy(42)Ni(10) displayed slow relaxation of the magnetization.

Combustion synthesis and electrochemical properties of the small hydrofullerene C50H10.

The hydrofullerene C(50)H(10) is synthesized by low-pressure benzene-oxygen diffusion combustion. The structure of C(50)H(10) is identified through NMR, mass spectrometry, and IR and Raman spectroscopy as a D(5h) symmetric closed-cage molecule with five pairs of fused pentagons stabilized by ten hydrogen atoms. UV/Vis and fluorescence spectrometric analyses disclose its optical properties as comparable with those of its chloride cousin (C(50)Cl(10)). Cyclic and square-wave voltammograms reveal that the first reduction potential of C(50)H(10) is more negative than that of C(50)Cl(10) as well as C(60), with implications for the utilization of C(50)H(10) as a promising electron acceptor for photovoltaic applications.

Magnetic nanosized {M(II)24}-wheel-based (M = Co, Ni) coordination polymers.

Two 3D coordination polymers, [Co(24)(OH)(12)(SO(4))(12)(ip)(6)(DMSO)(18)(H(2)O)(6)]·(DMSO)(6)(EtOH)(6)(H(2)O)(36) (1·guests, ip = isophthalate) and [Ni(24)(OH)(12)(SO(4))(12)(ip)(6)(DMSO)(12)(H(2)O)(12)]·(DMSO)(6)(EtOH)(6)(H(2)O)(20) (2·guests), constructed with nanosized tetraicosanuclear Co(II) and Ni(II) wheels are solvothermally synthesized. Both complexes show intra- and interwheel dominant antiferromagnetic interactions.