RESUMO
Sulfur hexafluoride (SF6) is widely used as an insulating gas, being an etchant and contrast agent in the electrical, semiconductor, and medical industries. However, due to its long lifetime and high global warming potential in the atmosphere, SF6 must be carefully handled to prevent leakage during production and usage. Herein, we report a sod-net metal-azolate framework (MAF) named MAF-stu-111, which decorates methyl and aldehyde groups in the porous windows, showing high adsorption affinity for SF6 at low pressure. Stability tests, gas adsorption, and breakthrough experiments demonstrated that MAF-stu-111 possesses excellent water and chemical stability, fully reversible SF6 uptake, high SF6/N2 separation selectivity (10:90, 285.2), good reusability, and high SF6 recovery purity (99.03%). Theoretical calculations revealed that hydrogen atoms of methyl and aldehyde groups can form multiple hydrogen bonds with SF6 molecules, which ensure that SF6 molecules are firmly held within the MAF-stu-111 framework, playing a key role in the selective separation of SF6/N2.
RESUMO
Electrocatalytic transformation of CO2 to various syngas compositions is an exceedingly attractive approach to carbon-neutral recycling. Meanwhile, the achievement of selectivity, stability, and tunability of product ratios using single-component electrocatalysts is challenging. Herein, the theoretically-assisted design of the triple-component nanocomposite electrocatalyst Cu10 Sn3 -Cu-SnOx that addresses this challenge is presented. It is shown that Cu10 Sn3 is a valuable electrocatalyst for suitable CO2 reduction to CO, SnO2 for CO2 reduction to formate at large overpotentials, and that the Cu-SnO2 interface facilitates H2 evolution. Accordingly, the interaction between the three functional components affords tunable CO/H2 ratios, from 1:2 to 2:1, of the produced syngas by controlling the applied potentials and relative contents of functional components. The syngas generation is selective (Faradaic efficiency, FE = 100%) at relatively lower cathodic potentials, whereas formate is the only liquid product detected at relatively higher cathodic potentials. The theoretically guided design approach therefore provides a new opportunity to boost the selectivity and stability of CO2 reduction to tunable syngas.
RESUMO
Creating new electron-deficient unit is highly demanded to develop high-performance polymer donors for non-fullerene organic solar cells (OSCs). Herein, we reported a multifluorinated unit 4,5,6,7-tetrafluoronaphtho[2,1-b : 3,4-b']dithio-phene (FNT) and its polymers PFNT-F and PFNT-Cl. The advantages of multifluorination: (1) it enables the polymers to exhibit low-lying HOMO (≈-5.5â eV) and wide band gap (≈2.0â eV); (2) the short interactions (Fâ â â H, Fâ â â F) endow the polymers with properties of high film crystallinity and efficient hole transport; (3) well miscibility with NFAs that leads to a more well-defined nanofibrous morphology and face-on orientation in the blend films. Therefore, the PFNT-F/Cl : N3 based OSCs exhibit impressive FF values of 0.80, and remarkable PCEs of 17.53 % and 18.10 %, which make them ranked the best donor materials in OSCs. This work offers new insights into the rational design of high-performance polymers by multifluorination strategy.
RESUMO
Tin disulfide (SnS2 ) is a promising candidate for electrosynthesis of CO2 -to-formate while the low activity and selectivity remain a great challenge. Herein, we report the potentiostatic and pulsed potential CO2 RR performance of SnS2 nanosheets (NSs) with tunable S-vacancy and exposure of Sn-atoms or S-atoms prepared controllably by calcination of SnS2 at different temperatures under the H2 /Ar atmosphere. The catalytic activity of S-vacancy SnS2 (Vs -SnS2 ) is improved 1.8â times, but it exhibits an exclusive hydrogen evolution with about 100 % FE under all potentials investigated in the static conditions. The theoretical calculations reveal that the adsorption of *H on the Vs -SnS2 surface is energetically more favorable than the carbonaceous intermediates, resulting in active site coverage that hinders the carbon intermediates from being adsorbed. Fortunately, the main product can be switched from hydrogen to formate by applying pulsed potential electrolysis benefiting from in situ formed partially oxidized SnS2-x with the oxide phase selective to formate and the S-vacancy to hydrogen. This work highlights not only the Vs -SnS2 NSs lead to exclusively H2 formation, but also provides insights into the systematic design of highly selective CO2 reduction catalysts reconstructed by pulsed potential electrolysis.
RESUMO
Methane, as the main component of natural gas, shale gas, and marsh gas, is regarded as an ideal clean energy to replace traditional fossil fuels and reduce carbon emissions. Porous materials with superior methane storage capacities are the key to the wide application of adsorbed natural gas technology in vehicle transportation. In this work, we applied a ligand tailoring strategy to a metal-organic framework (NOTT-101) to fine-tune its pore geometry, which was well characterized by gas and dye sorption measurements. High-pressure methane sorption isotherms revealed that the methane storage performance of the modified NOTT-101 can be effectively improved by decreasing the unusable uptake at 5 bar and increasing the total uptake under high pressures, achieving a substantially high volumetric methane storage working capacity of 190 cm3 (STP) cm-3 at 298 K and 5-80 bar.
RESUMO
Covalent organic frameworks (COFs), as a novel crystalline porous adsorbent, have been attracting significant attention for their synthesis and application exploration due to the advantages of designability, stability, and functionalization. Herein, through increasing the concentration of the acid catalyst, a facile solution-refluxing synthesis method was developed for the preparation of a three-dimensional dynamic COF material, COF-300, with high yields (>90%) and high space−time yields (>28 kg m−3 day−1). This synthesis method not only permits gram-scale synthesis, but also yields products that well maintain porosity and unique guest-dependent dynamic behavior. Moreover, the catalytic activity of COF-300 as a metal-free photocatalyst was explored for the first time. Under 365 nm ultra-violet light irradiation, COF-300 can effectively catalyze the dye degradation (>99%) in wastewater with good recyclability. By adding magnetic Fe3O4 nanoparticles into the solution-refluxing synthesis of COF-300, Fe3O4/COF-300 nanocomposites can be obtained and used as magnetically recyclable photocatalysts, demonstrating the superiority of this facile synthesis procedure. Our study provides new insights for the preparation of COF materials and a constructive exploration for their water treatment application.
RESUMO
Shape complementarity is a biological craft for precisely binding substrates at protein-protein interfaces. An analogy to such a function can be drawn conceptually for crystalline porous solids; yet the manifested entities are rare in reticular chemistry. The bottleneck-shaped pores carved out of a metal-organic framework, Zn(MIBA)2 (aka. MAF-stu-13), can perfectly accommodate benzene molecules. Remarkably, its framework adapts to the optimal guest binding-the enhanced host-guest interactions in the neck in turn minimize the guest-guest repulsion in the pore to the extent it turns into attraction-as demonstrated by the combined X-ray structural and DFT computational studies. This adaptive material can be used for liquid-phase production of ultrahigh-purity (≥99 %) cyclohexane, achieving a balance between uptake capacity and separation selectivity and surpassing the performances of other porous and nonporous crystals reported recently (e.g. product purity 99.4 % vs. 97.5 % to date).
Assuntos
Cicloexanos/isolamento & purificação , Imidazóis/química , Estruturas Metalorgânicas/química , Cicloexanos/química , Modelos Moleculares , Tamanho da PartículaRESUMO
In the evolution of metal-organic frameworks (MOFs) for carbon capture, a lasting challenge is to strike a balance between high uptake capacity/selectivity and low energy cost for regeneration. Meanwhile, these man-made materials have to survive from practical demands such as stability under harsh conditions and feasibility of scale-up synthesis. Reported here is a new MOF, Zn(imPim) (aka. MAF-stu-1), with an imidazole derivative ligand, featuring binding pockets that can accommodate CO2 molecules in a fit-like-a-glove manner. Such a high degree of shape complementarity allows direct observation of the loaded CO2 in the pockets, and warrants its optimal carbon capture performances exceeding the best-performing MOFs nowadays. Coupled with the record thermal (up to 680 °C) and chemical stability, as well as rapid large-scale production, both encoded in the material design, Zn(imPim) represents a most competitive candidate to tackle the immediate problems of carbon dioxide capture.
RESUMO
Metal nanoparticles (NPs) stabilized by MOFs are very promising for catalysis, whereas introduction of C60 into MOFs has been very rarely used, and there was no report for their cooperative catalysis in organic syntheses. In this work, C60 @UiO-67 was synthesized by a one-pot method, so that C60 is uniformly distributed on UiO-67 in molecular form. Pd NPs coordinating with C60 have been successfully embedded into the framework. The obtained multifunctional C60 Pdn @UiO-67 catalyst exhibits remarkable synergistic catalytic activity in cascade reactions under mild conditions, where UiO-67 affords Lewis acidity and C60 Pdn offers higher hydrogenation activity relative to solely Pd NPs.
RESUMO
As the main organic pollutants in wastewater, antibiotics and organic dyes are harmful to the environment and public health, and their removal is important but challenging. In this work, highly porous 3D metal-organic frameworks (MOFs) [M2 (PDAD)(H2 O)]n (PCN-124-stu; M=Cu, Zn; H4 PDAD = 5,5'-(pyridine-3,5-dicarbonyl)bis(azanediyl)diisophthalic acid) were synthesized, and PCN-124-stu(Cu) shows excellent chemical and thermal stability. PCN-124-stu(Cu) was used as a host for efficient extraction of various organic dyes, especially the large-molecule dye Coomassie brilliant blue, and fluoroquinolones from water, in comparison with five common MOFs, zeoliteâ 13X, and activated carbon. PCN-124-stu(Cu) exhibits absolute predominance for fluoroquinolone adsorption among these microporous materials because of the H-bonds between fluoroquinolone molecules and the amide groups in the frameworks, except for MIL-100(Cr), which is a mesoporous MOF. Moreover, PCN-124-stu(Cu) could release fluoroquinolones slowly in physiological saline and retained its framework structure after four adsorption/desorption cycles. In addition, PCN-124-stu(Cu) can be used as a platform for selective adsorption of CO2 /CH4.
Assuntos
Amidas/química , Antibacterianos/química , Dióxido de Carbono/química , Estruturas Metalorgânicas/química , Metano/química , Adsorção , Corantes/química , Porosidade , Água/químicaRESUMO
A new microporous luminescent coordination polymer [(CH3)2NH2]·[Cu2(CN)3] (1) with channels occupied by dimethylamine cations was synthesized due to the inducing effect of 2-(2'-pyridyl)imidazole. Complex 1 exhibits bright-green emission in the solid state, and its emission intensity would be significantly enhanced, especially by DMAc and cupric ion after immersing the as-synthesized crystals of 1 into common organic solvents or methanol solutions of various metal ions. In addition, 1 exhibits photocatalytic activity for the degradation of RhB and MB under natural light and is stable during the photocatalysis process. Thus, 1 can act as a multifunctional material for selectively sensing of Cu(2+) and effectively photocatalytic degradation of dyes.
RESUMO
Biological and artificial molecules and assemblies capable of supramolecular recognition, especially those with nucleobase pairing, usually rely on autonomous or collective binding to function. Advanced site-specific recognition takes advantage of cooperative spatial effects, as in local folding in protein-DNA binding. Herein, we report a new nucleobase-tagged metal-organic framework (MOF), namely ZnBTCA (BTC=benzene-1,3,5-tricarboxyl, A=adenine), in which the exposed Watson-Crick faces of adenine residues are immobilized periodically on the interior crystalline surface. Systematic control experiments demonstrated the cooperation of the open Watson-Crick sites and spatial effects within the nanopores, and thermodynamic and kinetic studies revealed a hysteretic host-guest interaction attributed to mild chemisorption. We further exploited this behavior for adenine-thymine binding within the constrained pores, and a globally adaptive response of the MOF host was observed.
Assuntos
DNA/química , Metais/química , Compostos Orgânicos/química , Cinética , Espectrofotometria Infravermelho , Análise Espectral Raman , TermodinâmicaRESUMO
It was found in the present study that combined use of fusidic acid (FA) and berberine chloride (BBR) offered an in vitro synergistic action against 7 of the 30 clinical methicillin-resistant Staphylococcus aureus (MRSA) strains, with a fractional inhibitory concentration (FIC) index ranging from 0.5 to 0.19. This synergistic effect was most pronounced on MRSA 4806, an FA-resistant isolate, with a minimum inhibitory concentration (MIC) value of 1,024 µg/ml. The time-kill curve experiment showed that FA plus BBR yielded a 4.2 log10 c.f.u./ml reduction in the number of MRSA 4806 bacteria after 24-h incubation as compared with BBR alone. Viable count analysis showed that FA plus BBR produced a 3.0 log10 c.f.u./ml decrease in biofilm formation and a 1.5 log10 c.f.u./ml decrease in mature biofilm in viable cell density as compared with BBR alone. In addition, phase contrast micrographs confirmed that biofilm formation was significantly inhibited and mature biofilm was obviously destructed when FA was used in combination with BBR. These results provide evidence that combined use of FA and BBR may prove to be a promising clinical therapeutic strategy against MRSA.
Assuntos
Antibacterianos/farmacologia , Berberina/farmacologia , Sinergismo Farmacológico , Ácido Fusídico/farmacologia , Staphylococcus aureus Resistente à Meticilina/efeitos dos fármacos , Carga Bacteriana , Biofilmes/efeitos dos fármacos , Humanos , Staphylococcus aureus Resistente à Meticilina/isolamento & purificação , Staphylococcus aureus Resistente à Meticilina/fisiologia , Testes de Sensibilidade Microbiana , Viabilidade Microbiana/efeitos dos fármacos , Infecções Estafilocócicas/microbiologiaRESUMO
A rod-packing, breathing MOF (1), with two crystalline structural intermediates (1 a and 1 b; H(2) btca = benzotriazole-5-carboxylic acid) has been investigated. An underlying net approach for analyzing possible breathing MOFs, and a set of geometric parameters that can quantitatively describe such a breathing structural feature, are suggested. The 3D luminescent MOF is a promising candidate for specific sensors with exceptional sorption capacity.
RESUMO
Their high tunability of electronic and magnetic properties makes transition-metal oxides (TMOs) highly intriguing for fundamental studies and promising for a wide range of applications. TMOs with strong ferrimagnetism provide new platforms for tailoring the anomalous Hall effect (AHE) beyond conventional concepts based on ferromagnets, and particularly TMOs with perpendicular magnetic anisotropy (PMA) are of prime importance for today's spintronics. This study reports on transport phenomena and magnetic characteristics of the ferrimagnetic TMO NiCo2 O4 (NCO) exhibiting PMA. The entire electrical and magnetic properties of NCO films are strongly correlated with their conductivities governed by the cation valence states. The AHE exhibits an unusual sign reversal resulting from a competition between intrinsic and extrinsic mechanisms depending on the conductivity, which can be tuned by the synthesis conditions independent of the film thickness. Importantly, skew-scattering is identified as an AHE contribution for the first time in the low-conductivity regime. Application wise, the robust PMA without thickness limitation constitutes a major advantage compared to conventional PMA materials utilized in today's spintronics. The great potential for applications is exemplified by two proposed novel device designs consisting only of NCO films that open a new route for future spintronics, such as ferrimagnetic high-density memories.
RESUMO
Morphology instability holds the major responsibility for efficiency degradation of organic solar cells (OSCs). However, how to develop polymer donors simultaneously with high efficiency and excellent morphology stability remains challenging. Herein, we reported naphtho[2,1-b:3,4-b']dithiophene-5,6-imide (NDTI)-based new polymers PNDT1 and PNDT2. The alkyl chain engineering leads to high crystallinity, high hole mobility (>10-3 cm2 V-1 S-1), and nanofibrous film morphology, which enable PNDT2 to exhibit an efficiency of 18.13% and a remarkable FF value of 0.80. Moreover, the NDTIs have short π-π stacking and abundant short interactions, and their polymers exhibit superior morphological stability. Therefore, the PNDT2-based OSCs exhibit much better device stability than that of PNDT1, PAB-α, and benchmark polymers PM6 and D18. This work suggests the great importance of the large conjugated backbone of the monomer and alkyl chain engineering to develop high-performance and morphology-stable polymers for OSCs.
RESUMO
Herein, the design and synthesis of an unprecedented cobaloxime-based zirconium metal-organic framework (Zr-TCPCo) with an she net is reported. This heterogeneous material as a photocatalyst exhibits excellent catalytic activity for aerobic oxidation of arylboronic acids to phenols. Recycling experiments demonstrate the stability and reusability of Zr-TCPCo as a robust catalyst.
RESUMO
Three cupric coordination assemblies [Cu(btca)(H(2)O)(2)] (1), [Cu(btca)(H(2)O)(3.5)](8)·16H(2)O (2), and [Cu(2.5)(btca)(1.5)(Hbtca)(0.5)(µ-Cl)(0.5)(µ(3)-OH)(H(2)O)]·H(2)O (3) have been solvothermally synthesized by cupric salts and a bifunctional ligand benzotriazole-5-carboxylic acid (H(2)btca) in different solvent medium. These complexes were structurally characterized by X-ray diffraction analyses and further identified by infrared spectra (IR), elemental analyses, powder X-ray diffraction (PXRD), and thermogravimetric analyses (TGA). Single crystal structural analysis shows that these coordination compounds assembled by the almost same reactants present diverse dimensional crystal structures, wherein 1 possesses two-dimensional (2D) layers with (4.8(2)) topology, the zero-dimensional (0D) neutral metallomacrocycle with flat octagonal geometry in 2 connects each other through hydrogen bonding to extend to be a three-dimensional (3D) nanotubular network, and 3 exhibits 3D framework with 1D honeycomb channels constructed by the strip-shaped chains containing [Cu(5)(µ(3)-OH)(2)(btca)(4)](-) pentaclusters bridging to the adjacent Cu(6)(btca)(12)(6-) cages. The diversity of these structures mainly stems from the versatile coordination modes of the anionic ligand in each compound, especially the 1,2,3-triazolate group: bidentate µ(1,2) bridging mode in 1, bidentate µ(1,3) bridging mode in 2, and tridentate µ(1,2,3) bridging mode in 3, respectively. Furthermore, the magnetic properties of 1-3 have been investigated as well.
RESUMO
By systematically varying the geometric length and electronic properties of the second ligating ligands of halogen (Cl(-), Br(-), and I(-)) and pseudohalogen (CN(-), SCN(-), and N(3)(-)) anions, we synthesized 11 isomeric/isostructural copper(I) complexes: [Cu(2)(L3-3)I](n) (1), [Cu(2)(L4-4)Br](n) (2-Br), [Cu(2)(L4-4)Cl](n) (2-Cl), [Cu(2)(L3-4)(CN)](n) (3), [Cu(2)(L3-3)(CN)](n) (4), [Cu(3)(L4-4)(CN)(2)](n) (5), {[Cu(2)(L4-4)Br](2)·CuBr}(n) (6-Br), {[Cu(2)(L4-4)Cl](2)·CuCl}(n) (6-Cl), [Cu(2)(L4-4)(SCN)](n) (7α-SCN), [Cu(2)(L4-4)(SCN)](n) (7ß-SCN), and [Cu(2)(L4-4)(N(3))](n) (7α-N(3)). These structures are based on a series of isomeric pyridylpyrazole ligands, namely, 3,5-bis(3-pyridyl)-1H-pyrazole (HL3-3), 3-(3-pyridyl)-5-(4-pyridyl)-1H-pyrazole (HL3-4), and 3,5-bis(4-pyridyl)-1H-pyrazole (HL4-4), and their structural features range from 1-D (1), 2-D (2), and 3-D noninterpenetration (3), to 3-D 2-fold interpenetration (4 and 5), to 3-D self-catenation (6 and 7), exhibiting a trend from simple to complex with dimension expansion and an interpenetrating degree increase. The five most complex structures (6 and 7) with self-catenated networks are based on 2-fold interpenetrated networks linked via appropriate second ligating spacers (Cl(-), Br(-), SCN(-), and N(3)(-)), representing a strategy to construct self-catenated coordination polymers through cross-linking interpenetrated frameworks. Moreover, these complexes exhibit strong photoluminescence, which is mainly ascribed to Cu(I)-related charge transfers (MLCT, MC, and MMLCT) regulated by the electronic properties of halogen or pseudohalogen. The topological evolution and luminescence variation presented in this work open an avenue to understanding the luminescence origin and the structure-property relationship of luminescent coordination polymers.
RESUMO
A detailed theoretical study of the potential energy surface of poorly understood ion-molecule reaction of NH(2)(-) and O(2) (a(1)Δ(g)) is explored at the density functional theory B3LYP/6-311++G(d,p), ab initio of QCISD/6-311++G(d,p) and CCSD(T)/6-311++G(3df, 2pd) (single-point) theoretical levels for the first time. It is shown that there are six total possible products from P(1) to P(6) on the singlet potential energy surface. Among these, the charge-transfer product P(1) (NH(2) + O(2)(-)) is the most favorable product with predominant abundances, whereas P(4) (NO(-) + H(2)O) and P(2) (HNO + OH(-)) may be the second and third feasible products followed by the almost neglectable P(3) (NO(2)(-) + H(2)), while P(5) (c-NO(2)(-) + H(2)) and P(6) (ONO(-) + H(2)) will not be observed due to their either high barriers or being secondary products. The present theoretical study points out that besides P(1) (NH(2) + O(2)(-)) and P(2) (HNO + OH(-)), P(4) (NO(-) + H(2)O) should be also observed, which is different from the previous experiment study by Anthony Midey et al. in 2008. In addition, almost all of the reaction pathways to products are exothermic and the reaction rate should be very fast since the reaction barriers are very low except for P(5) (c-NO(2)(-) + H(2)) which is in agreement with the measured total reaction rate constant k = 9.0 × 10(-10) cm(3)s(-1) at 300 K in the experiment study. It is expected that the present theoretical study may be helpful for the understanding of the reaction mechanism related to NHX(-), NX(2)(-), PHX(-), and PX(2)(-) (X = H, F, and Cl).