Early regional changes in retina and choroid of chicks following monocular hemifield form deprivation.

To investigate regional changes in the chick retina and choroid after hemifield form deprivation (HFD). Ten chicks were randomly and equally divided into a temporal retinal deprivation (TRD) and nasal retinal deprivation (NRD) group. HFD was induced with half-lateral translucent plastic goggles in the right eye; the left eye was kept untreated. Swept-source optical coherence tomography (SS-OCT) images obtained at 0, 3, and 72 hours (h) were analyzed using customized software. After 72 h of TRD, the retinal thickness (RT) of the treated eyes was significantly less than that of the fellow eyes in the temporal (P = 0.034) rather than the nasal (P = 0.083) region. In the NRD group, the RT of the treated eyes was thinner in both the nasal and temporal regions than that of the fellow eyes (P < 0.01). The RT alterations were more pronounced in the temporal (Δ = -16.86 ± 7.14 µm) than in the nasal (Δ = -13.44 ± 4.83 µm) region after 72-h TRD (P = 0.036), whereas the opposite was observed in the NRD group (P = 0.008). The choroidal thickness (ChT) of the treated eyes was less in both the nasal and temporal regions than that of the fellow eyes in both groups after 72-h treatment (P < 0.01). The ChT alterations were more pronounced in the temporal (Δ = -2.48 ± 8.95 µm) than in the nasal (Δ = 23.65 ± 13.58 µm) region after 72-h TRD (P = 0.021), whereas the NRD group showed the opposite effect (P = 0.019). HFD in chicks can lead to retinal and choroidal thinning in the corresponding regions.

Correlation analysis of angles κ and α with the refraction and anterior segment parameters in children.

AIM: To investigate the correlation of angles α and κ with the refractive and biological parameters in children. METHODS: This case-series study included 438 eyes of 219 children (males/females = 105/114, age: 3-15 years). Ocular biometric parameters, including axial length, corneal radius of curvature (CR), white-to-white distance (WTW), angle κ and angle α, were measured using IOL Master 700; auto-refraction were assessed under cycloplegia. The eyes were assigned to different groups based on CR, WTW, and gender to compare the angles α and κ, and analyze the correlations between the differences of biological parameters on angles α and κ. RESULTS: The means of axial length, CR, WTW, angle α, and angle κ were 23.24 ± 1.14 mm, 7.79 ± 0.27 mm, 11.68 ± 0.41 mm, 0.45 ± 0.25 mm, and 0.27 ± 0.22 mm, respectively. Angle α was correlated with CR and WTW (fixed effect coefficient [FEC] = 0.237, p = 0.015; FEC = -0.109, p = 0.003; respectively), and angle κ also correlated with CR and WTW (FEC = 0.271, p = 0.003; FEC = -0.147, p < 0.001, respectively). Comparing subgroups, the large CR and small WTW group had larger angles α (0.49 ± 0.27 vs. 0.41 ± 0.21, p < 0.001; 0.46 ± 0.27 vs. 0.44 ± 0.21, p < 0.05, respectively) and κ (0.29 ± 0.25 vs. 0.24 ± 0.15, p < 0.01; 0.29 ± 0.25 vs. 0.26 ± 0.19, p < 0.05, respectively). The differences in interocular angles α and κ showed correlation with interocular WTW (r = - 0.255, p < 0.001; r = - 0.385, p < 0.001). Eyes with smaller WTW tended to have larger angle κ (0.28 ± 0.27 vs. 0.25 ± 0.15, p < 0.05). CONCLUSION: The size of angle α/κ may be correlated to CR and WTW, and a larger WTW eye may suggest a smaller angle κ compared with the fellow eye.

Autostereoscopic 3D viewing can change the dimensions of the crystalline lens in myopes.

PURPOSE: Autostereoscopic displays have become increasingly common, but their impact on ocular dimensions remains unknown. We sought to identify changes in the crystalline lens dimensions induced by autostereoscopic three-dimensional (3D) viewing. METHODS: Forty young adults (age: 22.6 ± 2.0 years, male/female: 15/25) were consecutively enrolled and randomly divided into two groups (3D and two-dimensional [2D] viewing groups) to watch a 30-min movie clip displayed in 3D or 2D mode on a tablet computer. The lens thickness (LT), diameter, curvature, decentration and tilt were measured with anterior segment optical coherence tomography under both non-accommodating (static) and accommodating conditions. RESULTS: In the static condition, the LT decreased by 0.03 ± 0.03 mm (p < 0.001) and the anterior radius of curvature (ARC) increased by 0.49 ± 0.59 mm (p = 0.001) post-3D viewing. In contrast, following 2D viewing, the ARC decreased by 0.23 ± 0.25 mm (p = 0.001). Additionally, the increase in the steep ARC post-3D viewing was greater in high-myopic eyes than low to moderate myopic eyes (p = 0.04). When comparing the accommodative with the static (non-accommodative) condition, for 3D viewing the lens decentration decreased (-0.03 ± 0.05 mm, p = 0.02); while for 2D viewing, the posterior curvature radius (-0.14 ± 0.20 mm, p = 0.006) and diameter (-0.13 ± 0.20 mm, p = 0.01) decreased. CONCLUSIONS: Viewing with the autostereoscopic 3D tablet could temporally decrease the thickness and curvature of the lens under non-accommodating conditions. However, its long-term effect requires further exploration.

LncRNA-XR_002792574.1-mediated ceRNA network reveals potential biomarkers in myopia-induced retinal ganglion cell damage.

BACKGROUND: Long noncoding RNAs (lncRNAs) play a key role in the occurrence and progression of myopia. However, the function of lncRNAs in retinal ganglion cells (RGCs) in the pathogenesis of myopia is still unknown. The aim of our study was to explore the lncRNA-mediated competing endogenous RNA (ceRNA) network in RGCs during the development of myopia. METHODS: RNA sequencing was performed to analyze lncRNA and mRNA expression profiles in RGCs between guinea pigs with form-deprived myopia (FDM) and normal control guinea pigs, and related ceRNA networks were constructed. Then, potentially important genes in ceRNA networks were verified by qRT‒PCR, and Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment analyses were performed to explore biological functions in the RGCs of FDM guinea pigs. The important genes and related signaling pathways were further verified by qRT‒PCR, immunohistochemistry, immunofluorescence and Western blot in myopia in FDM guinea pigs, FDM mice, and highly myopic adults. RESULTS: The distribution of RGCs was uneven, the number of RGCs was decreased, and RGC apoptosis was increased in FDM guinea pigs. In total, 873 lncRNAs and 2480 mRNAs were determined to be differentially expressed genes in RGCs from normal control and FDM guinea pigs. Via lncRNA-mediated ceRNA network construction and PCR verification, we found that lncRNA-XR_002792574.1 may be involved in the development of myopia through the miR-760-3p/Adcy1 pathway in RGCs. Further verification in FDM guinea pigs, FDM mice, and highly myopic adults demonstrated that the lncRNA-XR_002792574.1/miR-760-3p/Adcy1 axis in RGCs might be related to cGMP/PKG, the apelin signaling pathway and scleral remodeling. CONCLUSION: We demonstrated that the lncRNA-XR_002792574.1/miR-760-3p/Adcy1 axis in RGCs might be related to myopia. On the one hand, the lncRNA-XR_002792574.1/miR-760-3p/Adcy1 axis might inhibit the cGMP/PKG and apelin signaling pathways in RGCs, thereby causing RGC damage in myopia. On the other hand, the lncRNA-XR_002792574.1/miR-760-3p/Adcy1 axis may cause myopic scleral remodeling through the ERK-MMP-2 pathway. These findings may reveal novel potential targets in myopia and provide reference value for exploration and development of gene editing therapeutics for hereditary myopia.

Photon color conversion enhancement of colloidal quantum dots inserted into a subsurface laterally-extended GaN nano-porous structure in an InGaN/GaN quantum-well template.

To improve the color conversion performance, we study the nanoscale-cavity effects on the emission efficiency of a colloidal quantum dot (QD) and the Förster resonance energy transfer (FRET) from quantum well (QW) into QD in a GaN porous structure (PS). For this study, we insert green-emitting QD (GQD) and red-emitting QD (RQD) into the fabricated PSs in a GaN template and a blue-emitting QW template, and investigate the behaviors of the photoluminescence (PL) decay times and the intensity ratios of blue, green, and red lights. In the PS samples fabricated on the GaN template, we observe the efficiency enhancements of QD emission and the FRET from GQD into RQD, when compared with the samples of surface QDs, which is attributed to the nanoscale-cavity effect. In the PS samples fabricated on the QW template, the FRET from QW into QD is also enhanced. The enhanced FRET and QD emission efficiencies in a PS result in an improved color conversion performance. Because of the anisotropic PS in the sample surface plane, the polarization dependencies of QD emission and FRET are observed.

Surface plasmon coupling effects on the photon color conversion behaviors of colloidal quantum dots in a GaN nanoscale hole with a nearby quantum-well structure.

To improve color conversion performance for color display application, we study the near-field-induced nanoscale-cavity effects on the emission efficiency and Förster resonance energy transfer (FRET) under the condition of surface plasmon (SP) coupling by inserting colloidal quantum dots (QDs) and synthesized Ag nanoparticles (NPs) into surface nano-holes fabricated on a GaN template and an InGaN/GaN quantum-well (QW) template. In the QW template, the inserted Ag NPs are close to either QWs or QDs for producing three-body SP coupling to enhance color conversion. Time-resolved and continuous-wave photoluminescence (PL) behaviors of the QW- and QD-emitting lights are investigated. The comparison between the nano-hole samples and the reference samples of surface QD/Ag NP shows that the nanoscale-cavity effect of the nano-hole leads to the enhancements of QD emission, FRET between QDs, and FRET from QW into QD. The SP coupling induced by the inserted Ag NPs can enhance the QD emission and FRET from QW into QD. Its result is further enhanced through the nanoscale-cavity effect. The relative continuous-wave PL intensities among different color components also show the similar behaviors. By introducing SP coupling to a color conversion device with the FRET process in a nanoscale cavity structure, we can significantly improve the color conversion efficiency. Simulation results confirm the basic observations in experiment.

Defocus-induced spatial changes in choroidal thickness of chicks observed by wide-field swept-source OCT.

Choroid has been claimed to be of importance during ocular development. However, how the choroid responds spatially to different visual cues has not been fully understood. The aim of this study was to investigate defocus-induced spatial changes in choroidal thickness (ChT) in chicks. Eight 10-day-old chicks were fitted monocularly with -10 D or +10 D lenses (day 0), which were removed seven days later (day 7). The ChT was measured on days 0, 7, 14, and 21 using wide-field swept-source optical coherence tomography (SS-OCT) and analyzed with custom-made software. Comparisons of the ChT in the central (1 mm), paracentral (1-3 mm), and peripheral (3-6 mm) ring areas and the ChT in the superior, inferior, nasal, and temporal regions were conducted. Axial lengths and refractions were also evaluated. In the negative lens group, the global ChT of the treated eyes was significantly less than that of the fellow eyes on day 7 (interocular difference: 179.28 ± 25.94 µm, P = 0.001), but thicker on day 21 (interocular difference: 241.80 ± 57.13 µm, P = 0.024). These changes were more pronounced in the central choroid. The superior-temporal choroid changed more during induction but less during recovery. In the positive lens group, the ChT of both eyes increased on day 7 and decreased on day 21, with most changes occurring in the central region, too. The inferior-nasal choroid of the treated eyes changed more during induction but less during recovery. These results provide evidence for regionally asymmetric characteristics of the choroidal response to visual cues and insights into the underlying mechanisms of emmetropization.

Effective optical zone following small incision lenticule extraction: a review.

Small incision lenticule extraction (SMILE) is a "flapless" keratorefractive surgery with excellent safety, efficacy, stability, and predictability for myopia correction. A recent global multicenter study also reported good refractive outcomes for hyperopic SMILE. SMILE has shown advantages including improved biomechanical strength, fewer dry eye symptoms, less corneal denervation, and fewer surgery-induced higher-order aberrations over laser in situ keratomileusis (LASIK). However, night vision complaints, including glare, halos, and starbursts, could still occur after SMILE. These symptoms have been proven to be closely related to the effective optical zone (EOZ), which is defined as the achieved area of corneal ablation. A larger postoperative EOZ may indicate better visual quality, making EOZ an important safety parameter for keratorefractive surgeries. As SMILE has gained wider application globally, the EOZ following SMILE has also been increasingly studied in the field of refractive surgery. This review provides an update on topics related to the EOZ after SMILE, including its measurement and influencing factors, aiming to benefit the personalization of the surgical algorithm and ultimately improve the visual quality after the SMILE procedure.

Corneal thickness measurements with the RTVue, Casia-2, and Pentacam devices in patients with mild-to-moderate keratoconus: a comparative study.

BACKGROUND: To compare the characteristics of corneal thickness measurements among the RTVue, Casia-2, and Pentacam in patients with mild-to-moderate keratoconus. METHODS: We recruited 46 eyes of 46 patients diagnosed with mild-to-moderate keratoconus at our hospital between January and March 2022. The central corneal thickness (CCT) and thinnest corneal thickness (TCT) were measured using two optical coherence tomography (OCT) instruments (RTVue and Casia-2) and the more conventional Pentacam. Differences and correlations between the CCTs and TCTs, based on the device and influencing factors, were explored. RESULTS: The CCTs were highly consistent among the groups (p = 0.434) and correlated with one another (p < 0.001). The TCTs measured by OCTs were thinner than those measured by the Pentacam (p < 0.001); however, all three devices were highly correlated (p < 0.001). The thinnest point location measurements with RTVue and Casia-2 differed significantly from the measurements with the Pentacam. Bland-Altman plots demonstrated a significant agreement between Pentacam and OCTs in TCT measurement (p < 0.001); the 95% limits of agreement were - 3.1 µm to + 33.1 µm for Pentacam and RTVue and - 8.6 µm to + 36.5 µm for Pentacam and Casia-2. RTVue and Casia-2 showed no difference in corneal thickness (p = 0.633) and thinnest point location measurement (p > 0.05). Multivariate analysis identified that the TCT measurement difference between the RTVue and Pentacam was related to the difference between the CCT and TCT (b = 0.490, 95% confidence interval [CI]: 0.033 to 0.948, p = 0.036), whereas the difference between the Casia-2 and Pentacam was related to the anterior radius for curvature (A) grade (b = 3.9, 95% CI: 1.753 to 6.074, p = 0.001), corneal pachymetry at the thinnest (C) grade (b = - 7.875, 95% CI: - 11.404 to - 4.346, p < 0.001), and the difference between the CCT and TCT (b = 0.425, 95% CI: 0.1 to 0.751, p = 0.012). CONCLUSIONS: CCTs in patients with mild-to-moderate keratoconus were similar among all three devices, but the TCTs and the thinnest point locations were not. Furthermore, the TCT measurement differences between the OCT devices and the Pentacam were more pronounced in keratoconus cases with a steeper anterior surface, thicker TCTs, and a larger difference between the CCT and TCT. TRIAL REGISTRATION: Number: 2021118-1. Retrospectively registered: September 01, 2021.

Seven-year corneal densitometry changes after small incision lenticule extraction and femtosecond laser-assisted in situ keratomileusis.

This study aims to investigate the 7-year changes in corneal densitometry (CD) after small incision lenticule extraction (SMILE) and femtosecond laser-assisted in situ keratomileusis (FS-LASIK). Forty-two eyes undergoing SMILE and thirty-one undergoing FS-LASIK were included in this retrospective study. CD was measured preoperatively and at 3 and 7 years postoperatively. Three concentric radial zones (0-2, 2-6, and 6-10 mm) of three different corneal depths (anterior 120 µm, posterior 60 µm, and central layer) were analyzed. In all three zones of the three corneal layers, no significant difference in CD was found between the two groups preoperatively and at 3 and 7 years postoperatively (all P > 0.05). All CD values in the three zones of the anterior and central layers significantly declined at 3 years postoperatively (all P < 0.001), and then increased at 7 years postoperatively compared to corresponding 3-year values (all P < 0.01). In the posterior layer, CD values in the 0-2-mm and 2-6-mm zones decreased at 3 years postoperatively (all P < 0.01) and continued to decrease at 7 years postoperatively (all P < 0.01). Similar CD trends were observed after SMILE and FS-LASIK. Posterior layer CD showed a decrease throughout the study period. In the anterior and central layers, CD values decreased and then increased at 7 years postoperatively. The transparency changes might have been due to age-related three-dimensional growth of collagen fibers and wound-healing reactions.

Nanoscale-cavity enhancement of color conversion with colloidal quantum dots embedded in the surface nano-holes of a blue-emitting light-emitting diode.

Although the method of inserting colloidal quantum dots (QDs) into deep nano-holes fabricated on the top surface of a light-emitting diode (LED) has been widely used for producing effective Förster resonance energy transfer (FRET) from the LED quantum wells (QWs) into the QDs to enhance the color conversion efficiency, an important mechanism for enhancing energy transfer in such an LED structure was overlooked. This mechanism, namely, the nanoscale-cavity effect, represents a near-field Purcell effect and plays a crucially important role in enhancing the color conversion efficiency. Here, we demonstrate the results of LED performance, time-resolved photoluminescence (TRPL), and numerical simulation to elucidate the nanoscale-cavity effect on color conversion by inserting a photoresist solution of red-emitting QDs into the nano-holes fabricated on a blue-emitting QW LED. Based on the TRPL study of the inserted QDs in a nano-hole structure fabricated on an un-doped GaN template of no QW, it is found that the emission efficiency of the inserted QDs is significantly increased due to the nanoscale-cavity effect. From the simulation study, it is confirmed that this effect can also increase the FRET efficiency, particularly for those radiating dipoles in the QWs oriented perpendicular to the sidewalls of the nano-holes. In the nanoscale-cavity effect, the enhanced near field distribution inside a nano-hole excited by a light emitter modifies its own radiation behavior through the Purcell effect such that its far-field emission becomes stronger.

Mesh size control in forming an Ag/AgO nano-network structure for transparent conducting application.

The variation behaviors of the morphology, transmission, and sheet resistance of the surface Ag/AgO nano-network (NNW) structures fabricated under different illumination conditions and with different Ag deposition thicknesses and thermal annealing temperatures in forming initial Ag nanoparticles (NPs) are studied. Generally, an NNW structure with a smaller mesh size or a denser branch distribution has a lower transmission and a lower sheet resistance level. Under the fabrication condition of a broader illumination spectrum, a lower thermal annealing temperature, or a thicker Ag deposition, we can obtain an NNW structure of a smaller mesh size. The mesh size of an NNW structure is basically controlled by the seed density of Brownian tree (BT) at the beginning of light illumination. A BT seed can be formed through a stronger local localized surface plasmon resonance for accelerating Ag oxidation in a certain region. Once an Ag/AgO BT seed is formed, the surrounding Ag NPs are reorganized to form the branches of a BT. Multiple BTs are connected to form a large-area NNW structure, which can serve as a transparent conductor. Under the fabrication conditions of a broader illumination spectrum, 3 nm Ag deposition, and 100 °C thermal annealing, we can implement an NNW structure to achieve ∼1.15µm in mesh size, ∼90 Ω sq-1in sheet resistance, and 93%-77% in transmittance within the wavelength range between 370 and 700 nm.

Long-term visual quality after small incision lenticule extraction (SMILE) and laser assisted subepithelial keratomileusis (LASEK) for low myopia.

BACKGROUND: Few studies have reported the visual outcomes of small-incision lenticule extraction (SMILE) and laser-assisted subepithelial keratomileusis (LASEK) for myopia correction. This study aims to compare the visual quality and corneal wavefront aberrations after SMILE and LASEK for low-myopia correction. METHODS: In this prospective study, we included 29 eyes of 29 patients who received SMILE and 23 eyes of 23 patients who received LASEK between June 2018 and January 2019. The following measurements were assessed: uncorrected (UDVA) and corrected (CDVA) distance visual acuity, manifest refraction, corneal wavefront aberrations, and subjective visual quality. All patients were followed up for two years. RESULTS: All procedures were uneventful. An efficacy index of 1.19 ± 0.17 was established in the SMILE group and 1.23 ± 0.20 in the LASEK group. No eyes lost more than two lines of CDVA. We found that 93% (27/29) of the treated eyes in the SMILE group and 91% (21/23) in the LASEK group had spherical equivalent (SE) within ± 0.25D. The increases in the total corneal spherical aberration and the corneal front spherical aberration were lower in the SMILE group than in the LASEK group (P < 0.01). In contrast, the increases in the total corneal vertical coma and the corneal front vertical coma in the SMILE group were greater than those in the LASEK group (P < 0.01). CONCLUSION: Both SMILE and LASEK have good safety, stability, and patient-reported satisfaction for low myopia. SMILE induced less corneal spherical aberration but greater vertical coma than LASEK.

Combined effects of surface plasmon coupling and Förster resonance energy transfer on the light color conversion behaviors of colloidal quantum dots on an InGaN/GaN quantum-well nanodisk structure.

By forming nanodisk (ND) structures on a blue-emitting InGaN/GaN quantum-well (QW) template, the QWs become close to the red-emitting quantum dots (QDs) and Ag nanoparticles (NPs) attached onto the sidewalls of the NDs such that Förster resonance energy transfer (FRET) and surface plasmon (SP) coupling can occur to enhance the efficiency of blue-to-red color conversion. With a larger ND height, more QWs are exposed to open air on the sidewall for more QD/Ag NP attachment through QD self-assembly and Ag NP drop casting such that the FRET and SP coupling effects, and hence the color conversion efficiency can be enhanced. A stronger FRET process leads to a longer QD photoluminescence (PL) decay time and a shorter QW PL decay time. It is shown that SP coupling can enhance the FRET efficiency.

Comparison of long-term visual quality after keratorefractive lenticule extraction and implantable collamer lens V4c for high myopia.

PURPOSE: To compare the long-term refractive outcomes and visual quality after KLEx and EVO-ICL implantation for high myopia. SETTING: Eye & ENT Hospital of Fudan University, Shanghai, China. DESIGN: A retrospective study. METHODS: This study included 31 KLEx-treated patients (31 eyes, spherical equivalent: -7.62D ± 1.22) and 32 ICL-treated patients (32 eyes, spherical equivalent: -8.22D ± 1.18). Refractive outcomes and objective visual quality were examined. Subjective visual quality was evaluated by a customized questionnaire. Patients' satisfaction was graded. RESULTS: Five-year postoperatively, the efficacy (KLEx: 0.96 ± 0.20; ICL: 1.03 ± 0.20; P = 0.164) and safety indices (KLEx:1.12 ± 0.20; ICL: 1.21 ± 0.19; P = 0.067) were comparable. Statistically higher proportions of ICL-treated eyes achieved a postoperative UDVA of 20/20 or better (P = 0.035). Refractive predictability was similar between the two groups (P = 0.947), whereas more KLEx-treated eyes had myopic refractive errors (P < 0.001). Total coma was significantly higher after KLEx (P = 0.020), and greater total trefoil was observed after ICL implantation (P = 0.006). Haloes were the primary visual disturbance in both groups (KLEx: 64.5%; ICL: 93.8%). The incidences of haloes (P < 0.001), glare (P = 0.004), and starbursts (P = 0.043) were notably higher after ICL implantation. The patient's satisfaction scores were similar (KLEx: 9.10 ± 1.27; ICL: 9.10 ± 1.27; P = 0.894). CONCLUSIONS: For high myopia, EVO-ICL yielded better long-term refractive outcomes than KLEx. Haloes were the chief complaint in both groups, with a significantly higher incidence after ICL implantation.

High-Throughput Automatic Laser Printing Strategy toward Cost-effective Portable Integrated Urea Tele-Monitoring System.

A portable sweat urea sensing system is a promising solution to satisfy the booming requirement of kidney function tele-monitoring. However, the complicated manufacturing route and the cumbersome electrochemical testing system still need to be improved to develop the urea point-of-care testing (POCT) and tele-monitoring devices. Here, a universal technical route based on a high-throughput automatic laser printing strategy for fabricating the portable integrated urea monitoring system is proposed. This integrated system includes a high-performance laser-printed urea sensing electrode, a planar three-electrode system, and a self-developed wireless mini-electrochemical workstation. A precursor donor layer is activated by laser scribing and in situ transferred into functional nanoparticles for the drop-on-demand printing of the urea sensing electrode. The obtained electrodes show high sensitivity, low detection limit, fast response time, high selectivity, good average recovery, and long-term stability for urea sensing. Additionally, a laser-induced graphene circuit-based miniature planar three-electrode system and a wireless mini-electrochemical workstation are designed for sensing data collection and transmitting, achieving real-time urea POCT and tele-monitoring. This scalable method provides a universal solution for high-throughput and ultra-fast fabrication of urea-sensing electrodes. The portable integrated urea monitoring system is a competitive option to achieve cost-effective POCT and tele-monitoring for kidney function.

Algorithmic and sensor-based research on Chinese children's and adolescents' screen use behavior and light environment.

Background: Myopia poses a global health concern and is influenced by both genetic and environmental factors. The incidence of myopia tends to increase during infectious outbreaks, such as the COVID-19 pandemic. This study examined the screen-time behaviors among Chinese children and adolescents and investigated the efficacy of artificial intelligence (AI)-based alerts in modifying screen-time practices. Methods: A cross-sectional analysis was performed using data from 6,716 children and adolescents with AI-enhanced tablets that monitored and recorded their behavior and environmental light during screen time. Results: The median daily screen time of all participants was 58.82 min. Among all age groups, elementary-school students had the longest median daily screen time, which was 87.25 min and exceeded 4 h per week. Children younger than 2 years engaged with tablets for a median of 41.84 min per day. Learning accounted for 54.88% of participants' screen time, and 51.03% (3,390/6,643) of the participants used tablets for 1 h at an average distance <50 cm. The distance and posture alarms were triggered 807,355 and 509,199 times, respectively. In the study, 70.65% of the participants used the tablet under an illuminance of <300 lux during the day and 61.11% under an illuminance of <100 lux at night. The ambient light of 85.19% of the participants exceeded 4,000 K color temperature during night. Most incorrect viewing habits (65.49% in viewing distance; 86.48% in viewing posture) were rectified swiftly following AI notifications (all p < 0.05). Conclusion: Young children are increasingly using digital screens, with school-age children and adolescents showing longer screen time than preschoolers. The study highlighted inadequate lighting conditions during screen use. AI alerts proved effective in prompting users to correct their screen-related behavior promptly.

Multifunctional laser-induced graphene circuits and laser-printed nanomaterials toward non-invasive human kidney function monitoring.

Faced with the increasing prevalence of chronic kidney disease (CKD), portable monitoring of CKD-related biomarkers such as potassium ion (K+), creatinine (Cre), and lactic acid (Lac) levels in sweat has shown tremendous potential for early diagnosis. However, a rapidly manufacturable portable device integrating multiple CKD-related biomarker sensors for ease of sweat testing use has yet to be reported. Here, a portable electrochemical sensor integrated with multifunctional laser-induced graphene (LIG) circuits and laser-printed nanomaterials based working electrodes fabricated by fully automatic laser manufacturing is proposed for non-invasive human kidney function monitoring. The sensor comprises a two-electrode LIG circuit for K+ sensing, a three-electrode LIG circuit with a Kelvin compensating connection for Cre and Lac sensing, and a printed circuit board based portable electrochemical workstation. The working electrodes containing Cu and Cu2O nanoparticles fabricated by two-step laser printing show good sensitivity and selectivity toward Cre and Lac sensing. The sensor circuits are fabricated by generating a hydrophilic-hydrophobic interface on a patterned LIG through laser. This sensor recruited rapid laser manufacturing and integrated with multifunctional LIG circuits and laser-printed nanomaterials based working electrodes, which is a potential kidney function monitoring solution for healthy people and kidney disease patients.

Coptis chinensis and Berberine Ameliorate Chronic Ulcerative Colitis: An Integrated Microbiome-Metabolomics Study.

Coptis chinensis Franch (RC), has historically been used for the treatment of "Xiao Ke" and "Xia Li" symptoms in China. "Xia Li" is characterized by abdominal pain and diarrhea, which are similar to the clinical symptoms of ulcerative colitis (UC). For the first time, this study aims to compare the anti-colitis effects of berberine (BBR) and total RC alkaloids (TRCA) and investigate the underlying metabolites and gut microbiota biomarkers. Metabolomics results showed that several colitis-related biomarkers, including lysophosphatidyl ethanolamine, lysophosphatidylcholine, scopolamine-methyl-bromide, N1-methyl-2-pyridone-5-carboxamide, 4-hydroxyretinoic acid, and malic acid, were significantly improved in model mice after BBR and TRCA treatments. High-dose BBR and TRCA treatments reversed the mouse colon shortening caused by dextran sodium sulfate (DSS), alleviated bowel wall swelling, and reduced inflammatory cell infiltration. BBR and TRCA restored the damaged mucosa integrity in colitis mice by upregulating claudin 1 and occludin, preventing colon epithelium apoptosis by inhibiting the cleavage of caspase 3. Additionally, BBR and TRCA significantly decreased the richness of the pathogenic bacteria Bacteroides acidifaciens but increased the abundance of the probiotic Lactobacillus spp. Notably, TRCA exhibited superior anti-colitis effects to those of BBR. Thus, this agent warrants further study and application in the treatment of inflammatory bowel disease in the clinic.

Influencing Factors of Glare in Patients With Myopia After Small Incision Lenticule Extraction.

PURPOSE: To investigate influencing factors of glare in patients with myopia after small incision lenticule extraction (SMILE). METHODS: Thirty patients (60 eyes) aged 24.9 ± 4.5 years with spherical equivalent of -6.69 ± 1.10 diopters (D) and astigmatism of -1.25 ± 0.76 D who underwent SMILE were consecutively recruited in this prospective study. Visual acuity, subjective refraction, Pentacam corneal topography (Oculus Optikgeräte GmbH), pupillometry, and glare test (Monpack One; Metrovision) were measured preoperatively and postoperatively. All patients were followed up for 6 months. The generalized estimation equation was used to judge the determinants of glare after SMILE, and a P value less than .05 was statistically significant. RESULTS: Under mesopic conditions, the halo radii preoperatively and at 1, 3, and 6 months after SMILE were 207.72 ± 46.67, 216.17 ± 40.63, 200.67 ± 34.68, and 193.50 ± 40.75 minutes of arc (arcmin), respectively. Under photopic conditions, the glare radii were 79.10 ± 17.78, 87.00 ± 20.44, 78.00 ± 14.59, and 72.00 ± 15.27 arcmin, respectively. Compared with preoperative glare, no significant changes were detected in postoperative glare. However, glare at 6 months was statistically significantly improved compared to the values at 1 month (both P < .05). Under mesopic conditions, the main influencing factors of glare were sphere (P = .007), astigmatism (P = .032), uncorrected distance visual acuity (UDVA) (P < .001), and postoperative time (all P < .05). Under photopic conditions, the main influencing factors of glare were astigmatism, UDVA, and postoperative time (all P < .05). CONCLUSIONS: Glare improved with time during the early stages after SMILE for myopia. Less glare was found to be associated with better UDVA, and greater residual astigmatism and sphere translated to more obvious glare. [J Refract Surg. 2023;39(6):398-404.].