Deterioration of apatite orientation in the cholecystokinin B receptor gene (Cckbr)-deficient mouse femurs.

INTRODUCTION: The discrepancy between bone mineral density (BMD), the gold standard for bone assessment, and bone strength is a constraint in diagnosing bone function and determining treatment strategies for several bone diseases. Gastric hypochlorhydria induced by clinically used proton pump inhibitor (PPI) therapy indicates a discordance between changes in BMD and bone strength. Here, we used Cckbr-deficient mice with gastric hypochlorhydria to examine the effect of gastric hypochlorhydria on bone mass, BMD, and preferential orientation of the apatite crystallites, which is a strong indicator of bone strength. MATERIALS AND METHODS: Cckbr-deficient mice were created, and their femurs were analyzed for BMD and preferential orientation of the apatite c-axis along the femoral long axis. RESULTS: Cckbr-deficient mouse femurs displayed a slight osteoporotic bone loss at 18 weeks of age; however, BMD was comparable to that of wild-type mice. In contrast, apatite orientation in the femur mid-shaft significantly decreased from 9 to 18 weeks. To the best of our knowledge, this is the first report demonstrating the deterioration of apatite orientation in the bones of Cckbr-deficient mice. CONCLUSION: Lesions in Cckbr-deficient mice occurred earlier in apatite orientation than in bone mass. Hence, bone apatite orientation may be a promising method for detecting hypochlorhydria-induced osteoporosis caused by PPI treatment and warrants urgent clinical applications.

Osteocalcin is necessary for the alignment of apatite crystallites, but not glucose metabolism, testosterone synthesis, or muscle mass.

The strength of bone depends on bone quantity and quality. Osteocalcin (Ocn) is the most abundant noncollagenous protein in bone and is produced by osteoblasts. It has been previously claimed that Ocn inhibits bone formation and also functions as a hormone to regulate insulin secretion in the pancreas, testosterone synthesis in the testes, and muscle mass. We generated Ocn-deficient (Ocn-/-) mice by deleting Bglap and Bglap2. Analysis of Ocn-/-mice revealed that Ocn is not involved in the regulation of bone quantity, glucose metabolism, testosterone synthesis, or muscle mass. The orientation degree of collagen fibrils and size of biological apatite (BAp) crystallites in the c-axis were normal in the Ocn-/-bone. However, the crystallographic orientation of the BAp c-axis, which is normally parallel to collagen fibrils, was severely disrupted, resulting in reduced bone strength. These results demonstrate that Ocn is required for bone quality and strength by adjusting the alignment of BAp crystallites parallel to collagen fibrils; but it does not function as a hormone.

Quantitative Threshold Determination of Auditory Brainstem Responses in Mouse Models.

The auditory brainstem response (ABR) is a scalp recording of potentials produced by sound stimulation, and is commonly used as an indicator of auditory function. However, the ABR threshold, which is the lowest audible sound pressure, cannot be objectively determined since it is determined visually using a measurer, and this has been a problem for several decades. Although various algorithms have been developed to objectively determine ABR thresholds, they remain lacking in terms of accuracy, efficiency, and convenience. Accordingly, we proposed an improved algorithm based on the mutual covariance at adjacent sound pressure levels. An ideal ABR waveform with clearly defined waves I-V was created; moreover, using this waveform as a standard template, the experimentally obtained ABR waveform was inspected for disturbances based on mutual covariance. The ABR testing was repeated if the value was below the established cross-covariance reference value. Our proposed method allowed more efficient objective determination of ABR thresholds and a smaller burden on experimental animals.

Ibandronate Suppresses Changes in Apatite Orientation and Young's Modulus Caused by Estrogen Deficiency in Rat Vertebrae.

Bone material quality is important for evaluating the mechanical integrity of diseased and/or medically treated bones. However, compared to the knowledge accumulated regarding changes in bone mass, our understanding of the quality of bone material is lacking. In this study, we clarified the changes in bone material quality mainly characterized by the preferential orientation of the apatite c-axis associated with estrogen deficiency-induced osteoporosis, and their prevention using ibandronate (IBN), a nitrogen-containing bisphosphonate. IBN effectively prevented bone loss and degradation of whole bone strength in a dose-dependent manner. The estrogen-deficient condition abnormally increased the degree of apatite orientation along the craniocaudal axis in which principal stress is applied; IBN at higher doses played a role in maintaining the normal orientation of apatite but not at lower doses. The bone size-independent Young's modulus along the craniocaudal axis of the anterior cortical shell of the vertebra showed a significant and positive correlation with apatite orientation; therefore, the craniocaudal Young's modulus abnormally increased under estrogen-deficient conditions, despite a significant decrease in volumetric bone mineral density. However, the abnormal increase in craniocaudal Young's modulus did not compensate for the degradation of whole bone mechanical properties due to the bone loss. In conclusion, it was clarified that changes in the material quality, which are hidden in bone mass evaluation, occur with estrogen deficiency-induced osteoporosis and IBN treatment. Here, IBN was shown to be a beneficial drug that suppresses abnormal changes in bone mechanical integrity caused by estrogen deficiency at both the whole bone and material levels.

Deletion of Tfam in Prx1-Cre expressing limb mesenchyme results in spontaneous bone fractures.

INTRODUCTION: Osteoblasts require substantial amounts of energy to synthesize the bone matrix and coordinate skeleton mineralization. This study analyzed the effects of mitochondrial dysfunction on bone formation, nano-organization of collagen and apatite, and the resultant mechanical function in mouse limbs. MATERIALS AND METHODS: Limb mesenchyme-specific Tfam knockout (Tfamf/f;Prx1-Cre: Tfam-cKO) mice were analyzed morphologically and histologically, and gene expressions in the limb bones were assessed by in situ hybridization, qPCR, and RNA sequencing (RNA-seq). Moreover, we analyzed the mitochondrial function of osteoblasts in Tfam-cKO mice using mitochondrial membrane potential assay and transmission electron microscopy (TEM). We investigated the pathogenesis of spontaneous bone fractures using immunohistochemical analysis, TEM, birefringence analyzer, microbeam X-ray diffractometer and nanoindentation. RESULTS: Forelimbs in Tfam-cKO mice were significantly shortened from birth, and spontaneous fractures occurred after birth, resulting in severe limb deformities. Histological and RNA-seq analyses showed that bone hypoplasia with a decrease in matrix mineralization was apparent, and the expression of type I collagen and osteocalcin was decreased in osteoblasts of Tfam-cKO mice, although Runx2 expression was unchanged. Decreased type I collagen deposition and mineralization in the matrix of limb bones in Tfam-cKO mice were associated with marked mitochondrial dysfunction. Tfam-cKO mice bone showed a significantly lower Young's modulus and hardness due to poor apatite orientation which is resulted from decreased osteocalcin expression. CONCLUSION: Mice with limb mesenchyme-specific Tfam deletions exhibited spontaneous limb bone fractures, resulting in severe limb deformities. Bone fragility was caused by poor apatite orientation owing to impaired osteoblast differentiation and maturation.

A Novel Ex Vivo Bone Culture Model for Regulation of Collagen/Apatite Preferential Orientation by Mechanical Loading.

The anisotropic microstructure of bone, composed of collagen fibers and biological apatite crystallites, is an important determinant of its mechanical properties. Recent studies have revealed that the preferential orientation of collagen/apatite composites is closely related to the direction and magnitude of in vivo principal stress. However, the mechanism of alteration in the collagen/apatite microstructure to adapt to the mechanical environment remains unclear. In this study, we established a novel ex vivo bone culture system using embryonic mouse femurs, which enabled artificial control of the mechanical environment. The mineralized femur length significantly increased following cultivation; uniaxial mechanical loading promoted chondrocyte hypertrophy in the growth plates of embryonic mouse femurs. Compressive mechanical loading using the ex vivo bone culture system induced a higher anisotropic microstructure than that observed in the unloaded femur. Osteocytes in the anisotropic bone microstructure were elongated and aligned along the long axis of the femur, which corresponded to the principal loading direction. The ex vivo uniaxial mechanical loading successfully induced the formation of an oriented collagen/apatite microstructure via osteocyte mechano-sensation in a manner quite similar to the in vivo environment.

Quantitative Evaluation of Osteocyte Morphology and Bone Anisotropic Extracellular Matrix in Rat Femur.

Osteocytes are believed to play a crucial role in mechanosensation and mechanotransduction which are important for maintenance of mechanical integrity of bone. Recent investigations have revealed that the preferential orientation of bone extracellular matrix (ECM) mainly composed of collagen fibers and apatite crystallites is one of the important determinants of bone mechanical integrity. However, the relationship between osteocytes and ECM orientation remains unclear. In this study, the association between ECM orientation and anisotropy in the osteocyte lacuno-canalicular system, which is thought to be optimized along with the mechanical stimuli, was investigated using male rat femur. The degree of ECM orientation along the femur longitudinal axis was significantly and positively correlated with the anisotropic features of the osteocyte lacunae and canaliculi. At the femur middiaphysis, there are the osteocytes with lacunae that highly aligned along the bone long axis (principal stress direction) and canaliculi that preferentially extended perpendicular to the bone long axis, and the highest degree of apatite c-axis orientation along the bone long axis was shown. Based on these data, we propose a model in which osteocytes can change their lacuno-canalicular architecture depending on the mechanical environment so that they can become more susceptible to mechanical stimuli via fluid flow in the canalicular channel.

Superior Alignment of Human iPSC-Osteoblasts Associated with Focal Adhesion Formation Stimulated by Oriented Collagen Scaffold.

Human-induced pluripotent stem cells (hiPSCs) can be applied in patient-specific cell therapy to regenerate lost tissue or organ function. Anisotropic control of the structural organization in the newly generated bone matrix is pivotal for functional reconstruction during bone tissue regeneration. Recently, we revealed that hiPSC-derived osteoblasts (hiPSC-Obs) exhibit preferential alignment and organize in highly ordered bone matrices along a bone-mimetic collagen scaffold, indicating their critical role in regulating the unidirectional cellular arrangement, as well as the structural organization of regenerated bone tissue. However, it remains unclear how hiPSCs exhibit the cell properties required for oriented tissue construction. The present study aimed to characterize the properties of hiPSCs-Obs and those of their focal adhesions (FAs), which mediate the structural relationship between cells and the matrix. Our in vitro anisotropic cell culture system revealed the superior adhesion behavior of hiPSC-Obs, which exhibited accelerated cell proliferation and better cell alignment along the collagen axis compared to normal human osteoblasts. Notably, the oriented collagen scaffold stimulated FA formation along the scaffold collagen orientation. This is the first report of the superior cell adhesion behavior of hiPSC-Obs associated with the promotion of FA assembly along an anisotropic scaffold. These findings suggest a promising role for hiPSCs in enabling anisotropic bone microstructural regeneration.

Promoting Effect of Basic Fibroblast Growth Factor in Synovial Mesenchymal Stem Cell-Based Cartilage Regeneration.

Synovial mesenchymal stem cell (SMSC) is the promising cell source of cartilage regeneration but has several issues to overcome such as limited cell proliferation and heterogeneity of cartilage regeneration ability. Previous reports demonstrated that basic fibroblast growth factor (bFGF) can promote proliferation and cartilage differentiation potential of MSCs in vitro, although no reports show its beneficial effect in vivo. The purpose of this study is to investigate the promoting effect of bFGF on cartilage regeneration using human SMSC in vivo. SMSCs were cultured with or without bFGF in a growth medium, and 2 × 105 cells were aggregated to form a synovial pellet. Synovial pellets were implanted into osteochondral defects induced in the femoral trochlea of severe combined immunodeficient mice, and histological evaluation was performed after eight weeks. The presence of implanted SMSCs was confirmed by the observation of human vimentin immunostaining-positive cells. Interestingly, broad lacunae structures and cartilage substrate stained by Safranin-O were observed only in the bFGF (+) group. The bFGF (+) group had significantly higher O'Driscoll scores in the cartilage repair than the bFGF (-) group. The addition of bFGF to SMSC growth culture may be a useful treatment option to promote cartilage regeneration in vivo.

Osteoporosis Changes Collagen/Apatite Orientation and Young's Modulus in Vertebral Cortical Bone of Rat.

This study revealed the distinguished changes of preferential orientation of collagen and apatite and Young's modulus in two different types of osteoporotic bones compared with the normal bone. Little is known about the bone material properties of osteoporotic bones; therefore, we aimed to assess material properties in osteoporotic bones. 66 female Sprague-Dawley rats were used. We analyzed the volumetric bone mineral density, collagen/apatite orientation, and Young's modulus of fifth lumbar vertebral cortex for osteoporotic rats caused by ovariectomy (OVX), administration of low calcium and phosphate content (LCaP) diet, and their combination (OVX + LCaP), as well as sham-operated control. Osteocyte conditions were assessed by hematoxylin and eosin and immunohistochemical (matrix extracellular phosphoglycoprotein (MEPE) and dentin matrix protein 1 (DMP1)) staining. All osteoporotic animals showed bone loss compared with the sham-operated control. OVX improved craniocaudal Young's modulus by enhancing collagen/apatite orientation along the craniocaudal axis, likely in response to the elevated stress due to osteoporotic bone loss. Conversely, LCaP-fed animals showed either significant bone loss or degraded collagen/apatite orientation and Young's modulus. Osteocytes in LCaP and OVX + LCaP groups showed atypical appearance and MEPE- and DMP1-negative phenotype, whereas those in the OVX group showed similarity with osteocytes in the control group. This suggests that osteocytes are possibly involved in the osteoporotic changes in collagen/apatite orientation and Young's modulus. This study is the first to demonstrate that osteoporosis changes collagen/apatite orientation and Young's modulus in an opposite manner depending on the cause of osteoporosis in spite of common bone loss.

Novel evaluation method of dentin repair by direct pulp capping using high-resolution micro-computed tomography.

OBJECTIVES: We evaluated a novel micro-computed tomography (micro-CT) assessment for quality and quantity of dentin repair, which is difficult to visualize by histological analysis, after direct pulp capping under standardized cavity preparation. MATERIALS AND METHODS: Standardized cavities were prepared on Wistar rats and direct pulp capping was performed using two commercial bioceramics, ProRoot MTA, and iRoot BP Plus. After 2 or 4 weeks, quality and quantity of tertiary dentin formation were evaluated using high-resolution micro-CT analyses including dentin mineral density, dentin mineral contents, compactness and integrity of tertiary dentin, and dentin volume with/without void space. Reproducibility of micro-CT analyses was confirmed by histological evaluation of the same specimen. RESULTS: The exposed pulp area sizes were similar between iRoot BP Plus and ProRoot MTA. Micro-CT analysis of 2-week samples showing compactness of tertiary dentin was significantly higher in iRoot BP Plus than ProRoot MTA (p < 0.05). Tertiary dentin volume without void space, dentin mineral contents, and density were not significantly different between the groups. In 4-week samples, a significant increase was observed in dentin mineral density, compactness, and dentin volume with/without void space induced by iRoot BP Plus (p < 0.05). Micro-CT analysis of tertiary dentin integrity demonstrated that some ProRoot MTA specimens had small defects and lacked continuity (6/512 images). No defects were observed with iRoot BP Plus. CONCLUSIONS: Micro-CT analysis was confirmed as an accurate, objective, and inclusive approach for evaluating quality and quantity of dentin repair. CLINICAL RELEVANCE: These multifaceted approaches to evaluate pulp capping materials may accelerate review processes, ultimately improving vital pulp therapy.

Synchronous disruption of anisotropic arrangement of the osteocyte network and collagen/apatite in melanoma bone metastasis.

Cancer metastasis to bones increases the risk of fragility fracture by altering bone metabolism and disrupting bone structure. Osteocytes, which organize a dense network that is closely linked with the circumambient matrix, play a key role in regulation of bone microstructure and material properties. The aim of this study was to elucidate the influence of cancer metastasis on the organization of the osteocyte network and collagen/biological apatite (BAp) microstructure in the context of osteocyte/matrix coupling. Using a mouse model intracardially injected with B16F10 melanoma cells or vehicle, the geometric and metabolic changes to osteocytes were analyzed by nano-computed tomography (nano-CT) and histology, and the alignment of collagen fibrils and BAp was analyzed by birefringence measurement and microbeam-X-ray diffraction, respectively. The material properties of bones were further analyzed with nanoindentation method. These experiments revealed that the osteocyte network was markedly disorganized in cancer-bearing bone tissues. The osteocytes showed a variety of residing states in the lacunae; some lacunae were osteolytic while some were replete with immature matrix, suggesting significant disruption in osteocyte/matrix coupling. Collagen/BAp microstructure was also disorganized in cancer-bearing bones as observed by significant decreases in the preferential alignment of both collagen fibrils and BAp; the latter was further shown to be significantly correlated with Young's modulus. The present study revealed that the disruption in the arrangement of the osteocyte network and collagen/BAp microstructure and the deterioration of mechanical function occurred synchronously during cancer bone metastasis.

Unloading-Induced Degradation of the Anisotropic Arrangement of Collagen/Apatite in Rat Femurs.

The specific orientation of collagen and biological apatite (BAp) is an anisotropic feature of bone micro-organization; it is an important determinant of bone mechanical function and performance under anisotropic stress. However, it is poorly understood how this microstructure orientation is altered when the mechanical environment changes. We hypothesized that the preferential orientation of collagen/BAp would change in response to changes in mechanical conditions, similar to the manner in which bone mass and bone shape change. In the present study, we investigated the effect of unloading (removal of anisotropic stress) on the preferential orientation of collagen/BAp using a rat sciatic neurectomy model. Bone tissue that formed under unloaded conditions showed a more disordered collagen/BAp orientation than bone tissue that formed under physiological conditions. Coincidentally, osteocytes in unloaded bone displayed spherical morphology and random alignment. To the best of our knowledge, this study is the first to demonstrate the degradation of preferential collagen/BAp orientation in response to unloading conditions. In summary, we identified alterations in bone material anisotropy as an important aspect of the bone's response to unloading, which had previously been examined with regard to bone loss only.

Evaluation of crystallographic orientation of biological apatite in vertebral cortical bone in ovariectomized cynomolgus monkeys treated with minodronic acid and alendronate.

Quantitative analysis of the orientational distribution of biological apatite (BAp) crystals is proposed as a new index of bone quality. This study aimed to analyze BAp c-axis orientation in ovariectomized (OVX) monkeys treated with amino-bisphosphonates minodronic acid and alendronate as reference. Sixty female monkeys aged 9-17 years were divided into five groups: one sham group and four OVX groups. The sham group and one OVX group were treated daily with vehicle for 17 months. The other three groups were treated daily with minodronic acid at doses of 0.015 and 0.15 mg/kg, and alendronate at 0.5 mg/kg orally, respectively. The seventh lumbar vertebrae were subjected to analysis of the preferential BAp c-axis orientation in the ventral cortical bone. The BAp c-axis orientation along the craniocaudal axis was significantly increased in the OVX monkeys. The high dose of minodronic acid suppressed the OVX-induced increase in the BAp c-axis orientation, whereas alendronate showed a non-significant tendency to suppress the increase in the orientation. In analysis with other parameters, the BAp c-axis orientation was positively correlated with bone formation indices in biochemical markers and bone histomorphometry and negatively correlated with the increase in lumbar bone mineral density. On the other hand, the BAp c-axis orientation was not correlated with bone resorption indices, except for the eroded surface. These results indicate that the increase in BAp c-axis orientation was ameliorated by minodronic acid treatment in OVX monkeys, mainly by suppression of bone formation increase.

Influence of Implant Neck Design on Bone Formation Under Mechanical Repetitive Loading: Histomorphometric and Microcomputed Tomographic Studies in Rabbit Tibiae.

PURPOSE: The aim of this study was to investigate effects of implant neck design on the original concept of osseointegration and bone formation when applying mechanical repetitive loading by bone-integrated implants. MATERIALS AND METHODS: Twenty-eight anodized Ti-6Al-4V alloy implants with +60° or -60° grooves in the implant neck were placed in the proximal tibial metaphysis of 14 rabbits. Fourteen implants received mechanical repetitive loading along the long axis of the implant for 8 weeks at 12 weeks after implant placement. The remaining 14 implants received no loading. Histomorphometric and microcomputed tomographic analyses were then performed. RESULTS: No effect of neck design was observed without mechanical loading, whereas osseointegration around the +60° grooves was upregulated with mechanical loading. Calculated load effects on bone structure around the implant neck with +60° grooves were larger when compared with the -60° grooves under mechanical loading. CONCLUSIONS: These findings indicate that the establishment of osseointegration and bone formation around the implant neck with +60° grooves is superior to those with -60° grooves under loaded conditions.

Conversion of a chaperonin GroEL-independent protein into an obligate substrate.

Chaperones assist protein folding by preventing unproductive protein aggregation in the cell. In Escherichia coli, chaperonin GroEL/GroES (GroE) is the only indispensable chaperone and is absolutely required for the de novo folding of at least ∼60 proteins. We previously found that several orthologs of the obligate GroE substrates in Ureaplasma urealyticum, which lacks the groE gene in the genome, are E. coli GroE-independent folders, despite their significant sequence identities. Here, we investigated the key features that define the GroE dependence. Chimera or random mutagenesis analyses revealed that independent multiple point mutations, and even single mutations, were sufficient to confer GroE dependence on the Ureaplasma MetK. Strikingly, the GroE dependence was well correlated with the propensity to form protein aggregates during folding. The results reveal the delicate balance between GroE dependence and independence. The function of GroE to buffering the aggregation-prone mutations plays a role in maintaining higher genetic diversity of proteins.

Dietary L-lysine prevents arterial calcification in adenine-induced uremic rats.

Vascular calcification (VC) is a life-threatening complication of CKD. Severe protein restriction causes a shortage of essential amino acids, and exacerbates VC in rats. Therefore, we investigated the effects of dietary l-lysine, the first-limiting amino acid of cereal grains, on VC. Male Sprague-Dawley rats at age 13 weeks were divided randomly into four groups: low-protein (LP) diet (group LP), LP diet+adenine (group Ade), LP diet+adenine+glycine (group Gly) as a control amino acid group, and LP diet+adenine+l-lysine·HCl (group Lys). At age 18 weeks, group LP had no VC, whereas groups Ade and Gly had comparable levels of severe VC. l-Lysine supplementation almost completely ameliorated VC. Physical parameters and serum creatinine, urea nitrogen, and phosphate did not differ among groups Ade, Gly, and Lys. Notably, serum calcium in group Lys was slightly but significantly higher than in groups Ade and Gly. Dietary l-lysine strongly suppressed plasma intact parathyroid hormone in adenine rats and supported a proper bone-vascular axis. The conserved orientation of the femoral apatite in group Lys also evidenced the bone-protective effects of l-lysine. Dietary l-lysine elevated plasma alanine, proline, arginine, and homoarginine but not lysine. Analyses in vitro demonstrated that alanine and proline inhibit apoptosis of cultured vascular smooth muscle cells, and that arginine and homoarginine attenuate mineral precipitations in a supersaturated calcium/phosphate solution. In conclusion, dietary supplementation of l-lysine ameliorated VC by modifying key pathways that exacerbate VC.

Promotion of endodontic lesions in rats by a novel extraradicular biofilm model using obturation materials.

Although extraradicular biofilm formation is related to refractory periapical periodontitis, the mechanism of extraradicular biofilm development, as well as its effect on periapical lesions, is unknown. Therefore, we aimed to develop an in vivo extraradicular biofilm model in rats and to identify and quantify extraradicular biofilm-forming bacteria while investigating the effect of extraradicular biofilms on periapical lesions. Periapical lesions were induced by exposing the pulpal tissue of the mandibular first molars of male Wistar rats to their oral environment. Four weeks later, gutta-percha points were excessively inserted into the mesial root canals of the right first molars (experimental sites) but not the left first molars (control sites). After 6 and 8 weeks of pulp exposure, the presence of extraradicular biofilms was confirmed histomorphologically, and biofilm-forming bacteria were identified by using classical culture methods. The biofilms were observed in the extraradicular area of the experimental sites. Similar species were detected both inside and outside the root canals. The bacterial count, quantified by real-time PCR assays, in the extraradicular area gradually increased in the experimental sites until 20 weeks after pulp exposure. After 8 weeks of pulp exposure, the periapical lesion volume that was measured by micro-computed tomography was significantly larger in the experimental sites than in the control sites (P < 0.05 by Welch's t test). These results suggest that we developed an extraradicular biofilm model in rats and that extraradicular biofilms affect developing periapical lesions.

Delineating the Ultra-Low Misorientation between the Dislocation Cellular Structures in Additively Manufactured 316L Stainless Steel.

Sub-micro dislocation cellular structures formed during rapid solidification break the strength-ductility trade-off in laser powder bed fusion (LPBF)-processed 316L stainless steel through high-density dislocations and segregated elements or precipitates at the cellular boundaries. The high-density dislocation entangled at the cellular boundary accommodates solidification strains among the cellular structures and cooling stresses through elastoplastic deformation. Columnar grains with cellular structures typically form along the direction of thermal flux. However, the ultra-low misorientations between the adjacent cellular structures and their interactions with the cellular boundary formation remain unclear. In this study, we revealed the ultra-low misorientations between the cellular structures in LPBF-processed 316L stainless steel using conventional electron backscatter diffraction (EBSD), transmission Kikuchi diffraction (TKD), and transmission electron microscopy (TEM). The conventional EBSD and TKD analysis results could provide misorientation angles smaller than 2°, while the resolution mainly depends on the specimen quality and scanning step size, and so on. A TEM technique with higher spatial resolution provides accurate information between adjacent dislocation cells with misorientation angles smaller than 1°. This study presents evidence that the TEM method is the better and more precise analytical method for the misorientation measurement of the cellular structures and provides insights into measuring the small misorientation angles between adjacent dislocation cells and nanograins in nanostructured metals and alloys with ultrafine-grained microstructures.