Application of augmented reality (AR) technology to locate the cutaneous perforator of anterolateral thigh perforator flap: A case report.

Multi-detector row computed tomography (MDCT) makes it possible to visualize the peripheral perforators of the anterolateral thigh (ALT) flap. However, to transfer the preoperative MDCT angiography data to the operative field requires effective techniques. In this report, we describe an application of augmented reality (AR) technology to harvest the anterolateral thigh flap. A 36-year-old female presented with a T2N2 squamous cell carcinoma of the lateral tongue. The patient underwent hemiglossectomy and microsurgical reconstruction using the left ALT flap. Three dimensional (3D) images the vascular image, vascular with muscles and vascular with outline of the thigh ware prepared. Then these images were exposed to an AR device. The location of the perforator was determined using the 3D vascular image on AR. The intraoperative location of the cutaneous perforator corresponded with the predicted location which was confirmed using the AR technique. A 6 × 15 cm left ALT flap was transferred to the defect. Microsurgical anastomosis was performed on the left superior thyroid artery and the internal jugular vein. There were no complications during the postoperative course. At the 6-month follow-up, the patient showed no evidence of flap and donor site complications. Our experience suggests that AR technology may effectively support the transfer of MDCT angiography images onto surgical sites.

Comparison of the Biomechanical Stiffness of Titanium and Sonic Weld RX Osteofixation Systems for Monoblock Zygomaticomaxillary Complex Fractures.

ABSTRACT: Resorbable osteosynthesis systems are widely used for the fixation of zygomaticomaxillary complex (ZMC) fractures instead of titanium systems, because they do not have postoperative hardware-related complications. However, the strength of conventional resorbable systems is inferior to that of titanium systems. Recently, ultrasound-aided resorbable osteosynthesis systems, which have higher fixation than conventional resorbable osteosynthesis systems, have become available.The purpose of this study was to compare the mechanical stiffness of the ultrasound-aided resorbable and titanium osteosynthesis systems in a cadaveric monoblock ZMC fracture model. Three human cadaveric monoblock ZMC fracture models (6 zygomas) were created. The fixation materials included the titanium (Level One Fixation; KLS Martin, Germany) and ultrasound-aided resorbable osteofixation systems (SonicWeld RX; KLS Martin). The fixation methods included the 3-point (zygomaticofrontal [ZF], zygomaticomaxillary buttress, and inferior orbital rim [Group I]) and the 2-point (ZF + inferior orbital rim [Group IIa] and ZF + zygomaticomaxillary buttress [Group IIb]) fixations. Each fixation model was mechanically tested with a load of up to 100 N, based on the previously reported postoperative masseter muscle strength, and the stiffness was calculated. Titanium was found to be stiffer than SonicWeld RX, though not significantly different. The fixation points in decreasing order of stiffness were Group I, Group IIa, and Group IIb, though the differences were not significant. In conclusion, the 2-point fixation, including the ZF fixation with SonicWeld RX, can be used as an alternative to the 3-point titanium fixation, which is considered to be stronger and stiffer.

Functional reconstruction of total upper eyelid defects with a composite radial forearm-palmaris longus tenocutaneous free flap: A report of two cases.

This report presents reconstruction of wide- and full-thickness upper eyelid defects with a composite radial forearm-splitting palmaris longus tendon flap, which maintains eyelid opening and closing functions and supporting tissue in a Meibomian gland carcinoma in the right upper eyelid (case 1) and Merkel cell carcinoma in the right upper eyelid (case 2). After tumor resection with excisional margins, the defects involved the muscle, tarsal, and mucosa, with defect sizes of 60 × 40 mm and 85 × 40 mm, respectively. A radial forearm flap with the palmaris longus tendon was transferred. The tendon was split into two strips: the upper strip was fixed to the frontal muscles for the opening function and the lower strip to the medial palpebral ligament and orbicularis oculi muscle to maintain the closing function. Flap vessels were anastomosed to the superficial temporal artery and vein through the subdermal tunnel. Postoperative courses were uneventful. At the 5-year (case 1) and 4-year (case 2) follow-up periods, there were no tumor recurrence and keratalgia, and the eyelid opening and closing functions were maintained. This approach may contribute to achievement of not only the opening function but also the closing function of the reconstructed eyelid.

Microsurgical mandibular reconstruction using a resin surgical guide combined with a metal reconstructive plate.

INTRODUCTION: In mandibular reconstruction, repositioning the mandibular position is still challenging and time consuming. We invented a new re-positioning technique using a resin plate combined with a reconstructive plate in reconstructing the mandible with an osteocutaneous free flap. The purpose of this report is to introduce this technique and evaluate the accuracy of mandibular reconstruction using free flaps. We hypothesized that this technique is precise and can reduce intraoperative plate bending at a low cost and short preparation period. METHODS: Mandibular reconstruction was successfully performed in a total of 10 cases without any complications. In this technique, a pre-bent reconstructive plate was prepared in accordance with a three-dimensional model, and then coated with resin. Intraoperatively, the mandibles were secured by fitting these plates snugly and fixing them using a reconstructive plate. Then the resin was removed and free osteocutaneous free flaps were transfer to the defect. Ten patients with a mean age of 68.2 who underwent mandibular resection for aggressive benign (n = 1) or malignant disease (n = 9) were reconstructed using this technique. Seven cases were reconstructed using fibular osteocutaneous free flaps, while scapular osteocutaneous free flaps were used in the remaining cases. The resections entailed: unilateral symphysis and lateral body in four cases, angle to ipsilateral angle in two, ramus to symphysis in two, and lateral body plus angle to symphysis in one case. The deviation of the mandible was evaluated by measuring the preoperative versus postoperative differences in the distances between six bilateral landmarks. RESULTS: There were no complications and flap failure in any of the 10 cases. No further intraoperative plate bending was required. One case underwent additional mucosal resection due to recurrence of cancer. Three cases were referred to postoperative chemoradiotherapy. Two patients expired during follow-up due to recurrence of cancer. Six cases were put back on a normal diet. The other cases who lacked opposing teeth had to remain on a soft diet. The mean follow-up period was 46.2 months. The average of the absolute deviation values was 1.45 mm. This value was 0.94 mm in six cases with mandibular body defects and 2.26 mm in four cases with mandibular defects involving the ramus. CONCLUSIONS: The present novel technique is simple, quick to prepare, and accurate. This technique can be a viable option for microsurgical mandibular reconstruction.

Glove-shaped Foam with Negative Pressure Wound Therapy for Skin Graft Fixation on the Hand.

Tie-over bolster dressing has been the gold standard for skin graft immobilization. However, skin grafting onto the hand remains challenging. To prevent shearing of the skin, joint fixation with Kirschner wire and casting is often required. However, wire fixation through the joint can disrupt finger growth and cause joint contracture, especially in pediatric patients. So, we performed graft fixation with negative pressure wound therapy (NPWT). The use of NPWT with skin grafting has recently been reported. Previous studies have reported that NPWT can provide even pressure on irregular wounds and in highly mobile areas. However, application of NPWT in the digital region often results in air leaks. This report includes four patients who required skin grafting on the hand. All patients received skin grafts in the affected area. Graft fixation was performed with NPWT. A glove-shaped form was designed. The hand was encased on the ventral and dorsal sides and small pieces of foam were placed between the fingers. The fixation was maintained for 7 days at a pressure of -50 to -80 mmHg. None of the cases had air leak requiring reattachment of the system and graft take was successful in all cases without any complications. The NPWT "glove-shape" technique enabled maintenance of average negative pressure for all skin grafts on the hand. This technique does not require joint fixation and may help to prevent growth disturbance and joint contracture.

Lymphoscintigraphy for prediction of effect of lymphaticovenular anastomosis for treatment of secondary lower limb lymphedema.

OBJECTIVE: The outcomes of lymphaticovenular anastomosis (LVA), especially for the lower extremities, have varied. To determine the optimal patient selection for LVA, we evaluated the smooth muscle function of lymph vessels using preoperative lymphoscintigraphy images and compared the findings with the LVA outcomes. METHODS: We performed a retrospective study of 81 patients with secondary lower extremity lymphedema who had undergone LVA between 2016 and 2018. To reduce the variability in the surgeon-specific variables that can affect the outcomes of LVA, all the cases from 2016 onward were performed by only two surgeons using standardized protocols for preoperative care, surgical technique, number of anastomoses, postoperative ambulation, and compression. The outcomes were evaluated by comparing the circumferences of the pre- and postoperative limbs. The preoperative lymphoscintigraphy findings were categorized into three types according to the range of the cephalad extent of the tracer as follows: type 1, tracer extending to the thigh or groin region; type 2, tracer extending to the lower leg or knee; and type 3, tracer localized at the ankle. The quantitative outcomes were evaluated by measuring the circumferences of the ankle, mid-calf, knee, and thigh. RESULTS: The average percentage in the reduction in the ankle, mid-calf, knee, and thigh circumference was 7.9%, 4.7%, 2.9%, and 3.0%, respectively. The average percentage in the reduction in the circumference for types 1 and 3 at the ankle, mid-calf, knee, and thigh was 11.6% and 8.6%, 7.6% and 1.6%, 5.2% and -0.5%, and 5.4% and -1.2%, respectively, with significant differences between types 1 and 3 in the thigh. The percentage of types 1, 2 and 3 was 60% to 76.4%, 11.7% to 20%, and 0% to 5.5% of the treated limbs that were similar in size to the contralateral healthy limb at the four sites of measurement, respectively. CONCLUSIONS: The use of LVA can effectively reduce the circumference of the lower limb. Our results suggest that the lymphoscintigraphy findings could help to predict the effect of LVA and could facilitate optimal patient selection.

Lymph Vessel Mapping Using Indocyanine Green Lymphography in the Nonaffected Side of Lower Leg.

BACKGROUND: The lymph vessels from the dorsum and the medial ankle ascending to the medial side of the thigh toward the inguinal lymph nodes can be observed by the linear flow using indocyanine green near-infrared lymphography (ICGL). Although anatomical studies have shown the widespread existence of lymphatic vessels throughout the body, ICGL shows little linear flow. We herein report our findings of the course of lymph vessels in healthy lower limbs. METHODS: The unaffected lower limbs of 14 patients who underwent lymphaticovenular anastomosis were evaluated for this study. The results of linear flow without massage obtained using ICGL were recorded using a 3-dimensional camera. The positions of lymph vessels were measured from the baseline, which was drawn from the midline of the anterior thigh to the second toe through the middle point of the patella. The locations of the lymph vessels were analyzed using 3-dimensional images at the following 4 points: 10 cm above the knee, at the lower pole of the patella, at the middle aspect of the lower leg, and at the dorsum of the foot. RESULTS: The average distance from the baseline to the linear flow at each point was 11.39, 9.82, 4.37, and 0.97 cm, respectively. The linear flow was observed inside of the baseline at a distance equivalent to 27.2%, 30.1%, 14.8%, and 4.4% of the leg circumference. CONCLUSIONS: Lymph vessels were observed extensively in the middle lower leg. In contrast, linear flow was limited to a small area at the other measurement points. At 10 cm above the knee, 62.5% of the observed lymph vessels ran 11-12 cm inward from the baseline. Although these results can be useful when choosing incision sites for effective lymphaticovenular anastomosis, this is a pilot study of 14 patients, and studies on a large number of healthy legs need to be done in future.

End-to-End Lymphaticovenular Anastomosis Does Not Disturb the Contraction of Collecting Lymph Vessels.

Supplemental Digital Content is available in the text.

A Case of Complex Facial Clefts Treated with Staged-tissue Expansion.

SUMMARY: Craniofacial clefts involve all soft tissue and skeletal elements throughout the cleft. Usefulness of tissue expansion in craniofacial clefts is reported. Surgery for a complex type of facial clefts is more difficult and more extensive than for a simple one. We experienced a primary case of complex facial clefts (Tessier No. 2 and 12 on the right and 3, 11, and 5 on the left). Soft-tissue closure of all clefts could be completed by using 4 tissue expanders and 7 operations. Because multiple tissue deficiencies and abnormalities exist in craniofacial clefts, especially complex type, a planned, staged, sequential approach by tissue expansion is necessary to produce ideal results.