RESUMO
Solar irradiance variations have a direct effect on the accuracy and repeatability of identifying spectral signatures in the remote sensing field experiments. Solar simulators have been deployed to allow for testing under controlled and reproducible laboratory conditions. However, it is difficult and expensive to make a large-area solar simulation with the appropriate spectral content and spatial uniformity of irradiance. In this study, a hybrid solar simulator has been designed and constructed to provide large-area illumination for remote sensing simulation applications. A design method based on the two-phase genetic algorithm is proposed to improve the performance of the spectral match and spatial uniformity, which no longer relies on the traditional trial-and-error technique. The first phase is used to determine the most appropriate configuration of different lamps in order to represent the solar spectrum. The second phase is to accommodate an optimal placement of the multiple sources to achieve irradiance uniformity. Both numerical simulations and experiments were performed to verify the performances. The results showed that the solar simulator provided a good spectral match and spatial irradiance for simulating the variations in direct normal irradiance at different solar zenith angles. In addition, the modular design makes it possible to adjust irradiance on the target area without altering the spectral distribution. This work demonstrates the development and measurement of a hybrid solar simulator with a realizable optimal configuration of multiple lamps, and offers the prospect of a scalable, large-area solar simulation.
RESUMO
To solve the problem caused by jamming, an acousto-optic tunable filter (AOTF)-based imaging spectrometer and a corresponding spatial-spectral discrimination method are proposed for aerial targets. The system has the capability of staring imaging and is electronically tunable, which provides the spatial location and a distinguishable spectral feature in a few images. Since AOTF operates in a frame mode, the spectral brightness of the targets can be predicted by Kalman filtering, like with the motion model. The final target state is updated by using synthetic spatial-spectral information to realize fast decision-making. The results show that the proposed method is more targeted to solve the problem caused by jamming, compared with the traditional energy discrimination method.
RESUMO
The reflectance factor acquired in laboratory makes a good contribution to spectral library for remote sensing. However, this reflectance factor is a different quantity from that acquired in the field. To bridge the gap between them, the spectral and the spatial characteristics of sunlight and skylight are analyzed. A facility called MHSRS2F is introduced to acquire the anisotropy reflectance in laboratory under the illumination of simulated sunlight and skylight. This reflectance factor is the same quantity as that acquired in field. The amplitude and shape differences between the reflectance factors acquired in laboratory and in field are reduced for 27% and 31% reflectively.
RESUMO
An excellent mission plan is the prerequisite for the acquisition of high quality airborne hyperspectral images which are useful for environmental research, mining etc. In order to minimize the radiance non-uniformity caused by the anisotropic reflectance of targets, the flight direction is mostly designed on the solar azimuth or 180° from it for whiskbroom and pushbroom imagers. However, the radiance to the observer is determined not only by the reflectance of the target, but also by the terrain, the illumination direction and the observation direction. So, the flight direction which is defined to minimize radiance non-uniformity might change with the terrain. In order to find the best flight direction for rugged terrain, we firstly analyze the causes of the effect of terrain on radiation non-uniformity based on the radiative transfer process. Then, the flight direction design method is proposed for composite sloping terrain. Tested by digital and physical simulation experiments, the radiance non-uniformity is minimized when the aircraft flies in the designated direction. Finally, a workflow for flight direction planning and optimizing is summarized, considering the flight mission planning techniques and the workflow of remote sensing missions.
RESUMO
An acousto-optic tunable filter (AOTF) is a new type of mono-wavelength generator, and an AOTF imaging spectrometer can obtain spectral images of interest. However, due to the limitation of AOTF aperture and acceptance angle, the light passing through the AOTF imaging spectrometer is weak, especially in the short-wave infrared (SWIR) region. In weak light conditions, the noise of a non-deep cooling mercury cadmium telluride (MCT) detector is high compared to the camera response. Thus, effective spectral images cannot be obtained. In this study, the single-pixel imaging (SPI) technique was applied to the AOTF imaging spectrometer, which can obtain spectral images due to the short-focus lens that collects light into a small area. In our experiment, we proved that the irradiance of a short-focus system is much higher than that of a long-focus system in relation to the AOTF imaging spectrometer. Then, an SPI experimental setup was built to obtain spectral images in which traditional systems cannot obtain. This work provides an efficient way to detect spectral images from 1000 to 2200 nm.
RESUMO
To analyze the influence factors of hyperspectral remote sensing data processing, and quantitatively evaluate the application capability of hyperspectral data, a combined evaluation model based on the physical process of imaging and statistical analysis was proposed. The normalized average distance between different classes of ground cover is selected as the evaluation index. The proposed model considers the influence factors of the full radiation transmission process and processing algorithms. First- and second-order statistical characteristics (mean and covariance) were applied to calculate the changes for the imaging process based on the radiation energy transfer. The statistical analysis was combined with the remote sensing process and the application performance, which consists of the imaging system parameters and imaging conditions, by building the imaging system and processing models. The season (solar zenith angle), sensor parameters (ground sampling distance, modulation transfer function, spectral resolution, spectral response function, and signal to noise ratio), and number of features were considered in order to analyze the influence factors of the application capability level. Simulated and real data collected by Hymap in the Dongtianshan area (Xinjiang Province, China), were used to estimate the proposed model's performance in the application of mineral mapping. The predicted application capability of the proposed model is consistent with the theoretical analysis.
RESUMO
The hyperspectral data and 3D structural data are highly useful in botanical research. But, the two types of information are often acquired separately and hard to be combined. In this work, a novel dual-path configuration based on acousto-optical tunable filter (AOTF) is proposed to acquire an image, structural and hyperspectral information within one acquisition process by a combination of laser triangulation. Under the configuration, the hyperspectral data and the 3D structure can be matched to subpixel level after geometrical calibration. Finally, the obtainment of 3D hyperspectral information in field experiment verifies the feasibility of this imaging system.
RESUMO
When detection blindness occurs due to thermal crossover for conventional broadband mid-infrared (IR) imaging, multispectral and polarimetric imaging present their advantages in solving the problem to some extent. However, neither of them is satisfactory for all application environments. In this paper, we demonstrate two types of detection blindness situations, analyze their corresponding mechanism, and identify the respective optimum application condition for multispectral and polarimetric imaging. First, a brief classification about a detection blindness situation that arises from self-radiation or reflected radiation of an object is presented. Second, based on the blindness model and detection mechanism, multispectral imaging is analyzed as superior in the emitted radiation dominant scene, while polarimetric imaging is more suitable in the field of the reflection dominant scene. Thirdly, a multispectral prototype and a polarimetric prototype for mid-IR thermal imaging are made and used to conduct a test experiment in two different environmental scenarios. The experimental results show that the multispectral and polarimetric mid-IR imaging systems can enhance the contrast of the detected images when traditional thermal imagery fails. In particular, the multispectral image has a high contrast in the scene that the emitted radiation is dominant over the ambient IR loading, such as the target and background of 295 K below a relatively less sunny sky, while the polarimetric imaging is more suitable in the scene where the reflection is dominant when the ambient IR loading is adequate, which is when the direct solar radiation is relatively strong.
Assuntos
Cegueira/diagnóstico , Diagnóstico por Imagem/instrumentação , Modelos Teóricos , Reconhecimento Automatizado de Padrão/métodos , Refratometria/instrumentação , HumanosRESUMO
The acousto-optic tunable filter (AOTF) with wide wavelength range and high spectral resolution has long crystal and two transducers. A longer crystal length leads to a bigger chromatic focal shift and the double-transducer arrangement induces angular mutation in diffracted beam, which increase difficulty in longitudinal and lateral chromatic aberration correction respectively. In this study, the two chromatic aberrations are analyzed quantitatively based on an AOTF optical model and a novel catadioptric dual-path configuration is proposed to correct both the chromatic aberrations. The test results exhibit effectiveness of the optical configuration for this type of AOTF-based imaging spectrometer.
RESUMO
Mid-wavelength IR (MWIR) thermal imaging spectrometers are widely used in remote sensing, industrial detection, and military applications. The acousto-optic tunable filter (AOTF)-based spectrometer has the advantages of fast tuning, light weight, and no moving parts, which make it ideally suited for MWIR applications. However, when designing an AOTF imaging spectrometer, the traditional method uses a refractive grating or parallel glass model in optical design software to simulate the AOTF, lowering the imaging performance of the optical system. In this paper, an accurate simulating model for an actual MWIR AOTF using the user-defined surface function in ZEMAX is presented, and an AOTF-based MWIR thermal imaging spectrometer is designed and tested successfully. It is based on a MWIR tellurium dioxide (TeO2) AOTF with an operational spectral range from 3.0 to 5.0 µm and a spectral resolution of 30.8 nm at 3.392 µm. The optical system employs a three-mirror off-axis afocal telescope with a 2.4°×2.0° field of view. The operation of the MWIR thermal imaging spectrometer and its image acquisition are computer controlled. Furthermore, the imaging spectrometer is tested in the laboratory, and several experiments are also presented. The experimental results indicate that the proposed AOTF model is efficient, and also show that the imaging spectrometer has the ability to distinguish the real hot target from the interfering target effectively.
RESUMO
Even though digital simulation technology has been widely used in the last two decades, hardware-in-the-loop (HWIL) simulation is still an indispensable method for spectral uncertainty research of ground targets. However, previous facilities mainly focus on the simulation of panchromatic imaging. Therefore, neither the spectral nor the spatial performance is enough for hyperspectral simulation. To improve the accuracy of illumination simulation, a new dome-like skylight simulator is designed and developed to fit the spatial distribution and spectral characteristics of a real skylight for the wavelength from 350 nm to 2500 nm. The simulator's performance was tested using a spectroradiometer with different accessories. The spatial uniformity is greater than 0.91. The spectral mismatch decreases to 1/243 of the spectral mismatch of the Imagery Simulation Facility (ISF). The spatial distribution of radiance can be adjusted, and the accuracy of the adjustment is greater than 0.895. The ability of the skylight simulator is also demonstrated by comparing radiometric quantities measured in the skylight simulator with those in a real skylight in Beijing.
RESUMO
Existing atmospheric correction methods retrieve surface reflectance keeping the same nominal spectral response functions (SRFs) as that of the airborne/spaceborne imaging spectrometer radiance data. Since the SRFs vary dependent on sensor type and configuration, the retrieved reflectance of the same ground object varies from sensor to sensor as well. This imposes evident limitations on data validation efforts between sensors at surface reflectance level. We propose a method to retrieve super-resolution reflectance at the surface, by combining the first-principles atmospheric correction method FLAASH (fast line-of-sight atmospheric analysis of spectral hypercubes) with spectral super-resolution of imaging spectrometer radiance data. This approach is validated by comparing airborne AVIRIS (airborne visible/infrared imaging spectrometer) and spaceborne Hyperion data. The results demonstrate that the super-resolution reflectance in spectral bands with sufficiently high signal-to-noise ratio (SNR) serves as intermediate quantity to cross validate data originating from different imaging spectrometers.
RESUMO
Sensor simulators can be used in forecasting the imaging quality of a new hyperspectral imaging spectrometer, and generating simulated data for the development and validation of the data processing algorithms. This paper presents a novel digital sensor simulator for the pushbroom Offner hyperspectral imaging spectrometer, which is widely used in the hyperspectral remote sensing. Based on the imaging process, the sensor simulator consists of a spatial response module, a spectral response module, and a radiometric response module. In order to enhance the simulation accuracy, spatial interpolation-resampling, which is implemented before the spatial degradation, is developed to compromise the direction error and the extra aliasing effect. Instead of using the spectral response function (SRF), the dispersive imaging characteristics of the Offner convex grating optical system is accurately modeled by its configuration parameters. The non-uniformity characteristics, such as keystone and smile effects, are simulated in the corresponding modules. In this work, the spatial, spectral and radiometric calibration processes are simulated to provide the parameters of modulation transfer function (MTF), SRF and radiometric calibration parameters of the sensor simulator. Some uncertainty factors (the stability, band width of the monochromator for the spectral calibration, and the integrating sphere uncertainty for the radiometric calibration) are considered in the simulation of the calibration process. With the calibration parameters, several experiments were designed to validate the spatial, spectral and radiometric response of the sensor simulator, respectively. The experiment results indicate that the sensor simulator is valid.
RESUMO
Adjacency effects may introduce errors in the quantitative applications of hyperspectral remote sensing, of which the significant item is the earth-atmosphere coupling radiance. However, the surrounding relief and shadow induce strong changes in hyperspectral images acquired from rugged terrain, which is not accurate to describe the spectral characteristics. Furthermore, the radiative coupling process between the earth and the atmosphere is more complex over the rugged scenes. In order to meet the requirements of real-time processing in data simulation, an equivalent reflectance of background was developed by taking into account the topography and the geometry between surroundings and targets based on the radiative transfer process. The contributions of the coupling to the signal at sensor level were then evaluated. This approach was integrated to the sensor-level radiance simulation model and then validated through simulating a set of actual radiance data. The results show that the visual effect of simulated images is consistent with that of observed images. It was also shown that the spectral similarity is improved over rugged scenes. In addition, the model precision is maintained at the same level over flat scenes.
RESUMO
Based on the imaging process of pushbroom hyperspectral imager, a correction method for optic crosstalk was developed. An area that has white calibration target was selected as reference data. The target pixels crosstalk quantity was gained using the subtraction between the two lines of reference data, and it was fitted to restrain noise. Using recursion method, crosstalk quantity of single pixel was calculated from the fitted function, and it could be used to correct the optical crosstalk of the whole data. Three PHI (pushbroom hyperspectral imager) data which have different ground scene were corrected. It was showed that optical crosstalk in corrected data is lightened obviously, and the data quality is improved effectively in both the spectral dimension and spatial dimension. The spectral changing caused by optical crosstalk is also corrected, and the bands with definition increased more than 50% accounts for 83% of the total bands. Optic crosstalk is obtained form hyperspectral data itself which is independent of other data source. It is proved that the correction method is valid, and it is applicable for different ground type. The correction method also provides a way to measure the optic crosstalk of hyperspectral imager in the lab.