RESUMO
Graphene films that can theoretically block almost all molecules have emerged as promising candidate materials for moisture barrier films in the applications of organic photonic devices and gas storage. However, the current barrier performance of graphene films does not reach the ideal value. Here, we reveal that the interlayer distance of the large-area stacked multilayer graphene is the key factor that suppresses water permeation. We show that by minimizing the gap between the two monolayers, the water vapor transmission rate of double-layer graphene can be as low as 5 × 10-3 g/(m2 d) over an A4-sized region. The high barrier performance was achieved by the absence of interfacial contamination and conformal contact between graphene layers during layer-by-layer transfer. Our work reveals the moisture permeation mechanism through graphene layers, and with this approach, we can tailor the interlayer coupling of manually stacked two-dimensional materials for new physics and applications.
RESUMO
The wettability of graphene is critical for numerous applications but is very sensitive to its surface cleanness. Herein, by clarifying the impact of intrinsic contamination, i.e., amorphous carbon, which is formed on the graphene surface during the high-temperature chemical vapor deposition (CVD) process, the hydrophilic nature of clean graphene grown on single-crystal Cu(111) substrate was confirmed by both experimental and theoretical studies, with an average water contact angle of â¼23°. Furthermore, the wettability of as-transferred graphene was proven to be highly dependent on its intrinsic cleanness, because of which the hydrophilic, clean graphene exhibited improved performance when utilized for cell culture and cryoelectron microscopy imaging. This work not only validates the intrinsic hydrophilic nature of graphene but also provides a new insight in developing advanced bioapplications using CVD-grown clean graphene films.
Assuntos
Grafite , Técnicas de Cultura de Células , Microscopia Crioeletrônica , Grafite/química , Interações Hidrofóbicas e Hidrofílicas , MolhabilidadeRESUMO
Chemical vapor deposition (CVD) has become a promising approach for the industrial production of graphene films with appealing controllability and uniformity. However, in the conventional hot-wall CVD system, CVD-derived graphene films suffer from surface contamination originating from the gas-phase reaction during the high-temperature growth. Shown here is that the cold-wall CVD system is capable of suppressing the gas-phase reaction, and achieves the superclean growth of graphene films in a controllable manner. The as-received superclean graphene film, exhibiting improved optical and electrical properties, was proven to be an ideal candidate material used as transparent electrodes and substrate for epitaxial growth. This study provides a new promising choice for industrial production of high-quality graphene films, and the finding about the engineering of the gas-phase reaction, which is usually overlooked, will be instructive for future research on CVD growth of graphene.
RESUMO
Single-particle cryo-electron microscopy (cryo-EM) has become one of the most essential tools to understand biological mechanisms at molecular level. A major bottleneck in cryo-EM technique is the preparation of good specimens that embed biological macromolecules in a thin layer of vitreous ice. In the canonical cryo-EM specimen preparation method, biological macromolecules tend to be adsorbed to the air-water interface, causing partial denaturation and/or preferential orientations. In this work, we have designed and produced a new type of cryo-EM grids using bioactive-ligand functionalized single-crystalline monolayer graphene membranes as supporting films. The functionalized graphene membrane (FGM) grids exhibit specific binding affinity to histidine (His)-tagged proteins and complexes. In cryo-EM, the FGM grids generate relatively low background for imaging and selectively anchor 20S proteasomes to the supporting film surface, enabling near-atomic-resolution 3D reconstruction of the complex. We envision that the FGM grids could benefit single particle cryo-EM specimen preparation with high reproducibility and robustness, therefore enhancing the efficiency and throughput of high-resolution cryo-EM structural determination.
Assuntos
Microscopia Crioeletrônica , Grafite/química , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
Chemical vapor deposition (CVD) enables the large-scale growth of high-quality graphene film and exhibits considerable potential for the industrial production of graphene. However, CVD-grown graphene film contains surface contamination, which in turn hinders its potential applications, for example, in electrical and optoelectronic devices and in graphene-membrane-based applications. To solve this issue, we demonstrated a modified gas-phase reaction to achieve the large-scale growth of contamination-free graphene film, i.e., superclean graphene, using a metal-containing molecule, copper(II) acetate, Cu(OAc)2, as the carbon source. During high-temperature CVD, the Cu-containing carbon source significantly increased the Cu content in the gas phase, which in turn suppressed the formation of contamination on the graphene surface by ensuring sufficient decomposition of the carbon feedstock. The as-received graphene with a surface cleanness of about 99% showed enhanced optical and electrical properties. This study opens a new avenue for improving graphene quality with respect to surface cleanness and provides new insight into the mechanism of graphene growth through the gas-phase reaction pathway.
RESUMO
Contamination commonly observed on the graphene surface is detrimental to its excellent properties and strongly hinders its application. It is still a great challenge to produce large-area clean graphene film in a low-cost manner. Herein, we demonstrate a facile and scalable chemical vapor deposition approach to synthesize meter-sized samples of superclean graphene with an average cleanness of 99 %, relying on the weak oxidizing ability of CO2 to etch away the intrinsic contamination, i.e., amorphous carbon. Remarkably, the elimination of amorphous carbon enables a significant reduction of polymer residues in the transfer of graphene films and the fabrication of graphene-based devices and promises strongly enhanced electrical and optical properties of graphene. The facile synthesis of large-area superclean graphene would open the pathway for both fundamental research and industrial applications of graphene, where a clean surface is highly needed.
RESUMO
Photocarrier generation in a material, transportation to the material surface, and collection at the electrode interface are of paramount importance in any optoelectronic and photovoltaic device. In the last collection process, ideal performance comprises ultrafast charge collection to enhance current conversion efficiency and broadband collection to enhance energy conversion efficiency. Here, for the first time, we demonstrate ultrafast broadband charge collection achieved simultaneously at the clean graphene/organic-inorganic halide perovskite interface. The clean interface is realized by directly growing perovskite on graphene surface without polymer contamination. The tunable two-color pump-probe spectroscopy, time-resolved photoluminescence spectroscopy, and time-dependent density functional theory all reveal that the clean-interfacial graphene collects band-edge photocarriers of perovskite in an ultrashort time of â¼100 fs, with a current collection efficiency close to 99%. In addition, graphene can extract deep-band hot carriers of perovskite within only â¼50 fs, several orders faster than hot carrier relaxation and cooling in perovskite itself, due to the unique Dirac linear band structure of graphene, indicating a potential high energy conversion efficiency exceeding the Shockley-Queisser limit. Adding other graphene superiority of good transparency, high carrier mobility, and extreme flexibility, clean-interfacial graphene provides an ideal charge collection layer and electrode candidate for future optoelectronic and photovoltaic applications in two dimensions.
RESUMO
Inorganic nanowire arrays hold great promise for next-generation energy storage and conversion devices. Understanding the growth mechanism of nanowire arrays is of considerable interest for expanding the range of applications. Herein, we report the solution-liquid-solid (SLS) synthesis of hexagonal nickel selenide nanowires by using a nonmetal molecular crystal (selenium) as catalyst, which successfully brings SLS into the realm of conventional low-temperature solution synthesis. As a proof-of-concept application, the NiSe nanowire array was used as a catalyst for electrochemical water oxidation. This approach offers a new possibility to design arrays of inorganic nanowires.
RESUMO
The high-intactness and ultraclean fabrication of suspended 2D materials has always been a challenge due to their atomically thin nature. Here, we present a universal polymer-free transfer approach for fabricating suspended 2D materials by using volatile micro-molecule cyclododecane as the transfer medium, thus ensuring the ultraclean and intact surface of suspended 2D materials. For the fabricated monolayer suspended graphene, the intactness reaches 99% for size below 10 µm and suspended size reaches 36 µm. Owing to the advantages of ultra-cleanness and large size, the thermal conductivity reaches 4914 W m - 1 K - 1 at 338 K. Moreover, this strategy can also realize efficient batch transfer of suspended graphene and is applicable for fabricating other 2D suspended materials such as MoS2. Our research not only establishes foundation for potential applications and investigations of intrinsic properties of large-area suspended 2D materials, but also accelerates the wide applications of suspended graphene grid in ultrahigh-resolution TEM characterization.
RESUMO
The disparity between growth substrates and application-specific substrates can be mediated by reliable graphene transfer, the lack of which currently strongly hinders the graphene applications. Conventionally, the removal of soft polymers, that support the graphene during the transfer, would contaminate graphene surface, produce cracks, and leave unprotected graphene surface sensitive to airborne contaminations. In this work, it is found that polyacrylonitrile (PAN) can function as polymer medium for transferring wafer-size graphene, and encapsulating layer to deliver high-performance graphene devices. Therefore, PAN, that is compatible with device fabrication, does not need to be removed for subsequent applications. The crack-free transfer of 4 in. graphene onto SiO2/Si wafers, and the wafer-scale fabrication of graphene-based field-effect transistor arrays with no observed clear doping, uniformly high carrier mobility (≈11 000 cm2 V-1 s-1), and long-term stability at room temperature, are achieved. This work presents new concept for designing the transfer process of 2D materials, in which multifunctional polymer can be retained, and offers a reliable method for fabricating wafer-scale devices of 2D materials with outstanding performance.
RESUMO
The real applications of chemical vapor deposition (CVD)-grown graphene films require the reliable techniques for transferring graphene from growth substrates onto application-specific substrates. The transfer approaches that avoid the use of organic solvents, etchants, and strong bases are compatible with industrial batch processing, in which graphene transfer should be conducted by dry exfoliation and lamination. However, all-dry transfer of graphene remains unachievable owing to the difficulty in precisely controlling interfacial adhesion to enable the crack- and contamination-free transfer. Herein, through controllable crosslinking of transfer medium polymer, the adhesion is successfully tuned between the polymer and graphene for all-dry transfer of graphene wafers. Stronger adhesion enables crack-free peeling of the graphene from growth substrates, while reduced adhesion facilitates the exfoliation of polymer from graphene surface leaving an ultraclean surface. This work provides an industrially compatible approach for transferring 2D materials, key for their future applications, and offers a route for tuning the interfacial adhesion that would allow for the transfer-enabled fabrication of van der Waals heterostructures.
RESUMO
The controlled preparation of single-crystal Cu(111) is intensively investigated owing to the superior properties of Cu(111) and its advantages in synthesizing high-quality 2D materials, especially graphene. However, the accessibility of large-area single-crystal Cu(111) is still hindered by time-consuming, complicated, and high-cost preparation methods. Here, the oxidization-temperature-triggered rapid preparation of large-area single-crystal Cu(111) in which an area up to 320 cm2 is prepared within 60 min, and where low-temperature oxidization of polycrystalline Cu foil surface plays a vital role, is reported. A mechanism is proposed, by which the thin Cux O layer transforms to a Cu(111) seed layer on the surface of Cu to induce the formation of a large-area Cu(111) foil, which is supported by both experimental data and molecular dynamics simulation results. In addition, a large-size high-quality graphene film is synthesized on the single-crystal Cu(111) foil surface and the graphene/Cu(111) composites exhibit enhanced thermal conductivity and ductility compared to their polycrystalline counterpart. This work, therefore, not only provides a new avenue toward the monocrystallinity of Cu with specific planes but also contributes to improving the mass production of high-quality 2D materials.
RESUMO
Single-crystal graphene (SCG) wafers are needed to enable mass-electronics and optoelectronics owing to their excellent properties and compatibility with silicon-based technology. Controlled synthesis of high-quality SCG wafers can be done exploiting single-crystal Cu(111) substrates as epitaxial growth substrates recently. However, current Cu(111) films prepared by magnetron sputtering on single-crystal sapphire wafers still suffer from in-plane twin boundaries, which degrade the SCG chemical vapor deposition. Here, it is shown how to eliminate twin boundaries on Cu and achieve 4 in. Cu(111) wafers with ≈95% crystallinity. The introduction of a temperature gradient on Cu films with designed texture during annealing drives abnormal grain growth across the whole Cu wafer. In-plane twin boundaries are eliminated via migration of out-of-plane grain boundaries. SCG wafers grown on the resulting single-crystal Cu(111) substrates exhibit improved crystallinity with >97% aligned graphene domains. As-synthesized SCG wafers exhibit an average carrier mobility up to 7284 cm2 V-1 s-1 at room temperature from 103 devices and a uniform sheet resistance with only 5% deviation in 4 in. region.
RESUMO
Recently, scalable production of large-area graphene films on metal foils with promising qualities is successfully achieved by eliminating grain boundaries, wrinkles, and adlayers. The transfer of graphene from growth metal substrates onto functional substrates remains one inescapable obstacle on the road to the real commercial applications of chemical vaport deposition (CVD) graphene films. Current transfer methods still require time-consuming chemical reactions, which hinders its mass production, and produces cracks and contamination that strongly impede performance reproducibility. Therefore, graphene transfer techniques with fine intactness and cleanness of transferred graphene, and improved production efficiency would be ideal for the mass production of graphene films on destination substrates. Herein, through the engineering of interfacial forces enabled by sophisticated design of transfer medium, the crack-free and clean transfer of 4-inch-sized graphene wafers onto silicon wafers within only 15 min is realized. The reported transfer method is an important leap over the long-lasting obstacle of the batch-scale graphene transfer without degrading the quality of graphene, bringing the graphene products close to the real applications.
RESUMO
Bilayer graphene (BLG) is intriguing for its unique properties and potential applications in electronics, photonics, and mechanics. However, the chemical vapor deposition synthesis of large-area high-quality bilayer graphene on Cu is suffering from a low growth rate and limited bilayer coverage. Herein, we demonstrate the fast synthesis of meter-sized bilayer graphene film on commercial polycrystalline Cu foils by introducing trace CO2 during high-temperature growth. Continuous bilayer graphene with a high ratio of AB-stacking structure can be obtained within 20 min, which exhibits enhanced mechanical strength, uniform transmittance, and low sheet resistance in large area. Moreover, 96 and 100% AB-stacking structures were achieved in bilayer graphene grown on single-crystal Cu(111) foil and ultraflat single-crystal Cu(111)/sapphire substrates, respectively. The AB-stacking bilayer graphene exhibits tunable bandgap and performs well in photodetection. This work provides important insights into the growth mechanism and the mass production of large-area high-quality BLG on Cu.
RESUMO
The wettability of graphene remains controversial owing to its high sensitivity to the surroundings, which is reflected by the wide range of reported water contact angle (WCA). Specifically, the surface contamination and underlying substrate would strongly alter the intrinsic wettability of graphene. Here, the intrinsic wettability of graphene is investigated by measuring WCA on suspended, superclean graphene membrane using environmental scanning electron microscope. An extremely low WCA with an average value ≈30° is observed, confirming the hydrophilic nature of pristine graphene. This high hydrophilicity originates from the charge transfer between graphene and water molecules through H-π interaction. The work provides a deep understanding of the water-graphene interaction and opens up a new way for measuring the surface properties of 2D materials.
RESUMO
Formation of graphene wrinkle arrays can periodically alter the electrical properties and chemical reactivity of graphene, which is promising for numerous applications. However, large-area fabrication of graphene wrinkle arrays remains unachievable with a high density and defined orientations, especially on rigid substrates. Herein, relying on the understanding of the formation mechanism of transfer-related graphene wrinkles, the graphene wrinkle arrays are fabricated without altering the crystalline orientation of entire graphene films. The choice of the transfer medium that has poor wettability on the corrugated surface of graphene is proven to be the key for the formation of wrinkles. This work provides a deep understanding of formation process of transfer-related graphene wrinkles and opens up a new way for periodically modifying the surface properties of graphene for potential applications, including direct growth of AlN epilayers and deep ultraviolet light emitting diodes.
RESUMO
The availability of graphene and other two-dimensional (2D) materials on a wide range of substrates forms the basis for large-area applications, such as graphene integration with silicon-based technologies, which requires graphene on silicon with outperforming carrier mobilities. However, 2D materials were only produced on limited archetypal substrates by chemical vapor deposition approaches. Reliable after-growth transfer techniques, that do not produce cracks, contamination, and wrinkles, are critical for layering 2D materials onto arbitrary substrates. Here we show that, by incorporating oxhydryl groups-containing volatile molecules, the supporting films can be deformed under heat to achieve a controllable conformal contact, enabling the large-area transfer of 2D films without cracks, contamination, and wrinkles. The resulting conformity with enhanced adhesion facilitates the direct delamination of supporting films from graphene, providing ultraclean surfaces and carrier mobilities up to 1,420,000 cm2 V-1 s-1 at 4 K.
RESUMO
Grain boundaries produced during material synthesis affect both the intrinsic properties of materials and their potential for high-end applications. This effect is commonly observed in graphene film grown using chemical vapor deposition and therefore caused intense interest in controlled growth of grain-boundary-free graphene single crystals in the past ten years. The main methods for enlarging graphene domain size and reducing graphene grain boundary density are classified into single-seed and multiseed approaches, wherein reduction of nucleation density and alignment of nucleation orientation are respectively realized in the nucleation stage. On this basis, detailed synthesis strategies, corresponding mechanisms, and key parameters in the representative methods of these two approaches are separately reviewed, with the aim of providing comprehensive knowledge and a snapshot of the latest status of controlled growth of single-crystal graphene films. Finally, perspectives on opportunities and challenges in synthesizing large-area single-crystal graphene films are discussed.
RESUMO
The last 10 years have witnessed significant progress in chemical vapor deposition (CVD) growth of graphene films. However, major hurdles remain in achieving the excellent quality and scalability of CVD graphene needed for industrial production and applications. Early efforts were mainly focused on increasing the single-crystalline domain size, large-area uniformity, growth rate, and controllability of layer thickness and on decreasing the defect concentrations. An important recent advance was the discovery of the inevitable contamination phenomenon of CVD graphene film during high-temperature growth processes and the superclean growth technique, which is closely related to the surface defects and to the peeling-off and transfer quality. Superclean graphene represents a new frontier in CVD graphene research. In this Perspective, we aim to provide comprehensive understanding of the intrinsic growth contamination and the experimental solution of making superclean graphene and to provide an outlook for future commercial production of high-quality CVD graphene films.