Pre-oxygenation using high-flow nasal oxygen in parturients undergoing caesarean section in general anaesthesia: A prospective, multi-centre, pilot study.

BACKGROUND: Parturients undergoing caesarean section in general anaesthesia have an increased risk of desaturating during anaesthesia induction. Pre- and peri-oxygenation with high-flow nasal oxygen prolong the safe apnoea time but data on parturients undergoing caesarean section under general anaesthesia are limited. This pilot study aimed to investigate the clinical effects and frequency of desaturation in parturients undergoing caesarean section in general anaesthesia pre- and peri-oxygenated with high-flow nasal oxygen and compare this to traditional pre-oxygenation using a facemask. METHODS: In this prospective, non-randomised, multi-centre study we included pregnant women with a gestational age ≥30 weeks undergoing caesarean section under general anaesthesia. All parturients were asked to participate in the intervention group consisting of pre-oxygenation using high-flow nasal oxygen. Parturients declining participation were pre-oxygenated with a traditional facemask. Primary outcome was the proportion of parturients desaturating below 93% from start of pre-oxygenation until 1 min after tracheal intubation. Secondary outcomes investigated end-tidal oxygen concentrations after tracheal intubation and the proportion of parturients with signs of regurgitation. RESULTS: A total of 34 parturients were included, 25 pre- and peri-oxygenated with high-flow nasal oxygen and 9 pre-oxygenated with facemask. No difference in patient or airway characteristics could be seen except for a higher BMI in the high-flow nasal oxygen group (31.4 kg m-2 [4.7] vs. 27.7 kg m-2 [3.1]; p = .034). No woman in any of the two groups desaturated below 93%. The lowest peripheral oxygen saturation observed, in any parturient, was 97%. There was no difference detected in end-tidal oxygen concentration after tracheal intubation, 87% (6) in the high-flow nasal oxygen group vs 80% (15) in the facemask group (p = .308). No signs of regurgitation, in any parturient, were seen. CONCLUSION: Pre- and peri-oxygenation with high-flow nasal oxygen maintain adequate oxygen saturation levels during induction of anaesthesia also in parturients. Regurgitation of gastric content did not occur in any parturient and no other safety concerns were observed in this pilot study.

Dynamics and Sorption Kinetics of Methanol Monomers and Clusters on Nopinone Surfaces.

Organic-organic interactions play important roles in secondary organic aerosol formation, but the interactions are complex and poorly understood. Here, we use environmental molecular beam experiments combined with molecular dynamics simulations to investigate the interactions between methanol and nopinone, as atmospheric organic proxies. In the experiments, methanol monomers and clusters are sent to collide with three types of surfaces, i.e., graphite, thin nopinone coating on graphite, and nopinone multilayer surfaces, at temperatures between 140 and 230 K. Methanol monomers are efficiently scattered from the graphite surface, whereas the scattering is substantially suppressed from nopinone surfaces. The thermal desorption from the three surfaces is similar, suggesting that all the surfaces have weak or similar influences on methanol desorption. All trapped methanol molecules completely desorb within a short experimental time scale at temperatures of 180 K and above. At lower temperatures, the desorption rate decreases, and a long experimental time scale is used to resolve the desorption, where three desorption components are identified. The fast component is beyond the experimental detection limit. The intermediate component exhibits multistep desorption character and has an activation energy of Ea = 0.18 ± 0.03 eV, in good agreement with simulation results. The slow desorption component is related to diffusion processes due to the weak temperature dependence. The molecular dynamics results show that upon collisions the methanol clusters shatter, and the shattered fragments quickly diffuse and recombine to clusters. Desorption involves a series of processes, including detaching from clusters and desorbing as monomers. At lower temperatures, methanol forms compact cluster structures while at higher temperatures, the methanol molecules form layered structures on the nopinone surface, which are visible in the simulation. Also, the simulation is used to study the liquid-liquid interaction, where the methanol clusters completely dissolve in liquid nopinone, showing ideal organic-organic mixing.

Experimental and Computational Study of Molecular Water Interactions with Condensed Nopinone Surfaces Under Atmospherically Relevant Conditions.

Water and organics are omnipresent in the atmosphere, and their interactions influence the properties and lifetime of both aerosols and clouds. Nopinone is one of the major reaction products formed from ß-pinene oxidation, a compound emitted by coniferous trees, and it has been found in both gas and particle phases in the atmosphere. Here, we investigate the interactions between water molecules and nopinone surfaces by combining environmental molecular beam (EMB) experiments and molecular dynamics (MD) simulations. The EMB method enables detailed studies of the dynamics and kinetics of water interacting with solid nopinone at 170-240 K and graphite coated with a molecularly thin nopinone layer at 200-270 K. MD simulations that mimic the experimental conditions have been performed to add insights into the molecular-level processes. Water molecules impinging on nopinone surfaces are efficiently trapped (≥97%), and only a minor fraction scatters inelastically while maintaining 35-65% of their incident kinetic energy (23.2 ± 1.0 kJ mol-1). A large fraction (60-80%) of the trapped molecules desorbs rapidly, whereas a small fraction (20-40%) remains on the surface for more than 10 ms. The MD calculations confirm both rapid water desorption and the occurrence of strongly bound surface states. A comparison of the experimental and computational results suggests that the formation of surface-bound water clusters enhances water uptake on the investigated surfaces.

Understanding water interactions with organic surfaces: environmental molecular beam and molecular dynamics studies of the water-butanol system.

The interactions between water molecules and condensed n-butanol surfaces are investigated at temperatures from 160 to 240 K using the environmental molecular beam experimental method and complementary molecular dynamics (MD) simulations. In the experiments hyperthermal water molecules are directed onto a condensed n-butanol layer and the flux from the surface is detected in different directions. A small fraction of the water molecules scatters inelastically from the surface while losing 60-90% of their initial kinetic energy in collisions, and the angular distributions of these molecules are broad for both solid and liquid surfaces. The majority of the impinging water molecules are thermalized and trapped on the surface, while subsequent desorption is governed by two different processes: one where molecules bind briefly to the surface (residence time τ < 10 µs), and another where the molecules trap for a longer time τ = 0.8-2.0 ms before desorbing. Water molecules trapped on a liquid n-butanol surface are substantially less likely to escape from the surface compared to a solid layer. The MD calculations provide detialed insight into surface melting, adsorption, absorption and desorption processes. Calculated angular distributions and kinetic energy of emitted water molecules agree well with the experimental data. In spite of its hydrophobic tail and enhanced surface organization below the melting temperature, butanol's hydrophilic functional groups are concluded to be surprisingly accessible to adsorbed water molecules; a finding that may be explained by rapid diffusion of water away from hydrophobic surface structures towards more strongly bound conformational structures.

The Dynamics and Kinetics of Water Interactions with a Condensed Nopinone Surface.

Water and organic molecules are omnipresent in the environment, and their interactions are of central importance in many Earth system processes. Here we investigate molecular-level interactions between water and a nopinone surface using an environmental molecular beam (EMB) technique. Nopinone is a major reaction product formed during oxidation of ß-pinene, a prominent compound emitted by coniferous trees, which has been found in both the gas and particle phases of atmospheric aerosol. The EMB method enables detailed studies of the dynamics and kinetics of D2O molecules interacting with a solid nopinone surface at 202 K. Hyperthermal collisions between water and nopinone result in efficient trapping of water molecules, with a small fraction that scatter inelastically after losing 60-80% of their incident kinetic energy. While the majority of the trapped molecules rapidly desorb with a time constant τ less than 10 µs, a substantial fraction (0.32 ± 0.09) form strong bonds with the nopinone surface and remain in the condensed phase for milliseconds or longer. The interactions between water and nopinone are compared to results for recently studied water-alcohol and water-acetic acid systems, which display similar collision dynamics but differ with respect to the kinetics of accommodated water. The results contribute to an emerging surface science-based view and molecular-level description of organic aerosols in the atmosphere.

Depletion of IL-2 receptor ß-positive cells protects from diabetes in non-obese diabetic mice.

The destruction of ß-cells in type 1 diabetes (T1D) progresses silently until only a minor fraction of the ß-cells remain. A late acting therapy leading to the prevention of further ß-cell killing would therefore be desirable. CD122, the ß chain of the interleukin-2 receptor, is highly expressed on natural killer (NK) cells and on a subpopulation of CD8 T cells. In this study, we have treated non-obese diabetic (NOD) mice with a depleting antibody against CD122. The treatment protected from diabetes, even when initiated just before disease onset. The degree of leukocyte infiltration into islets was unaffected by the treatment, further supporting effectiveness late in the disease process. It effectively removed all NK cells from the spleen, pancreas and pancreatic lymph nodes and abolished NK cell activity. Interestingly, despite the lack of CD122 expression on CD8 T cells in the pancreas, the overall frequency of CD8 cells decreased in this organ, whereas it was unaffected in the spleen. T cells were also still capable to respond against a foreign antigen. Conclusively, targeting of CD122(+) cells could represent a novel treatment strategy against T1D.

pH and bacterial profile of dental plaque in children and adults of a low caries population.

OBJECTIVE: This study compares pH and microbiological profile of dental plaque in children and adults of a low caries population. MATERIAL AND METHODS: Thirty-nine children, 12-14 years of age and 45 adults between 20 and 39 years of age in 5 Karen villages of the Tak province, Northern Thailand were examined for plaque, calculus, caries (DMFT) and pH measurements in resting plaque and after a sucrose rinse. Information on dietary and oral hygiene habits was obtained through interviews using a fixed questionnaire. Microbiological profile of plaque samples was analyzed with DNA-DNA checkerboard technique. RESULTS: Mean DMFT was 0.77 ± 1.56 and 87% of the adults and 67% of the children were caries free (p < 0.05). The mean resting pH was for both age groups in the range of 7.0-7.1 and significantly higher than a Swedish caries free reference group. Karen adult men had significantly lower pH minimum than females and children (p < 0.05). Supragingival plaque samples showed high levels of low acidogenic and anaerobic species, which dominated over strong acid producers such as streptococci. CONCLUSION: The study indicates that the Karen children and adults has a plaque physiology and microbiology predominating by low acidogenic anaerobes, which in addition to the low sucrose intake explains the low caries prevalence in this population.

Integration of multiple flexible electrodes for real-time detection of barrier formation with spatial resolution in a gut-on-chip system.

In healthy individuals, the intestinal epithelium forms a tight barrier to prevent gut bacteria from reaching blood circulation. To study the effect of probiotics, dietary compounds and drugs on gut barrier formation and disruption, human gut epithelial and bacterial cells can be cocultured in an in vitro model called the human microbial crosstalk (HuMiX) gut-on-a-chip system. Here, we present the design, fabrication and integration of thin-film electrodes into the HuMiX platform to measure transepithelial electrical resistance (TEER) as a direct readout on barrier tightness in real-time. As various aspects of the HuMiX platform have already been set in their design, such as multiple compressible layers, uneven surfaces and nontransparent materials, a novel fabrication method was developed whereby thin-film metal electrodes were first deposited on flexible substrates and sequentially integrated with the HuMiX system via a transfer-tape approach. Moreover, to measure localized TEER along the cell culture chamber, we integrated multiple electrodes that were connected to an impedance analyzer via a multiplexer. We further developed a dynamic normalization method because the active measurement area depends on the measured TEER levels. The fabrication process and system setup can be applicable to other barrier-on-chip systems. As a proof-of-concept, we measured the barrier formation of a cancerous Caco-2 cell line in real-time, which was mapped at four spatially separated positions along the HuMiX culture area.

Two-Photon Polymerization Printing with High Metal Nanoparticle Loading.

Two-photon polymerization (2PP) is an efficient technique to achieve high-resolution, three-dimensional (3D)-printed complex structures. However, it is restricted to photocurable monomer combinations, thus presenting constraints when aiming at attaining functionally active resist formulations and structures. In this context, metal nanoparticle (NP) integration as an additive can enable functionality and pave the way to more dedicated applications. Challenges lay on the maximum NP concentrations that can be incorporated into photocurable resist formulations due to the laser-triggered interactions, which primarily originate from laser scattering and absorption, as well as the limited dispersibility threshold. In this study, we propose an approach to address these two constraints by integrating metallic Rh NPs formed ex situ, purposely designed for this scope. The absence of surface plasmon resonance (SPR) within the visible and near-infrared spectra, coupled with the limited absorption value measured at the laser operating wavelength (780 nm), significantly limits the laser-induced interactions. Moreover, the dispersibility threshold is increased by engineering the NP surface to be compatible with the photocurable resin, permitting us to achieve concentrations of up to 2 wt %, which, to our knowledge, is significantly higher than the previously reported limit (or threshold) for embedded metal NPs. Another distinctive advantage of employing Rh NPs is their role as promising contrast agents for X-ray fluorescence (XRF) bioimaging. We demonstrated the presence of Rh NPs within the whole 2PP-printed structure and emphasized the potential use of NP-loaded 3D-printed nanostructures for medical devices.

Ethanol and acetaldehyde exposure induces specific epigenetic modifications in the prodynorphin gene promoter in a human neuroblastoma cell line.

Ethanol alters neural activity through interaction with multiple neurotransmitters and neuromodulators. The endogenous opioid system seems to play a key role, since the opioid receptor antagonist naltrexone (ReVia®) attenuates craving for alcohol. We recently reported that ethanol and acetaldehyde, the first product of ethanol metabolism, affect transcription of opioid system genes in human SH-SY5Y neuroblastoma cells. In the current study, potential epigenetic mechanisms were investigated to clarify these effects on prodynorphin gene expression. DNA methylation was analyzed by bisulfite pyrosequencing, and chromatin immunoprecipitation was used to assess putative specific histone modifications at the prodynorphin gene promoter. The results demonstrated a temporal relationship between selective chromatin modifications induced by ethanol and acetaldehyde and changes in prodynorphin gene expression quantitated by real-time qPCR. DNA methylation was not altered in any of the experimental conditions used. The epigenetic changes may precede gene transcription, and histone modifications might keep the prodynorphin gene in a poised state for later reactivation. A link has been observed between gene expression alterations and selective epigenetic modulation in the prodynorphin promoter region, demonstrating a specificity of the changes induced by ethanol and acetaldehyde. The latter may be mediating ethanol effects at the genomic level.

Uniform and position-controlled InAs nanowires on 2" Si substrates for transistor applications.

This study presents a novel approach for indirect integration of InAs nanowires on 2'' Si substrates. We have investigated and developed epitaxial growth of InAs nanowires on 2'' Si substrates via the introduction of a thin yet high-quality InAs epitaxial layer grown by metalorganic vapor phase epitaxy. We demonstrate well-aligned nanowire growth including precise position and diameter control across the full wafer using very thin epitaxial layers (<300 nm). Statistical analysis results performed on the grown nanowires across the 2'' wafer size verifies our full control on the grown nanowire with 100% growth yield. From the crystallographic viewpoint, these InAs nanowires are predominantly of wurtzite structure. Furthermore, we show one possible device application of the aforementioned structure in vertical wrap-gated field-effect transistor geometry. The vertically aligned InAs nanowires are utilized as transistor channels and the InAs epitaxial layer is employed as the source contact. A high uniformity of the device characteristics for numerous transistors is further presented and RF characterization of these devices demonstrates an f(t) of 9.8 GHz.

Photophysiological response of Symbiodiniaceae single cells to temperature stress.

Photosynthetic dinoflagellates in the family Symbiodiniaceae engage in symbiosis with scleractinian corals. As coral 'bleaching' is partly governed by the thermal sensitivity of different Symbiodiniaceae lineages, numerous studies have investigated their temperature sensitivity. However, the systematic identification of single-cells with increased temperature resistance among these dinoflagellates has remained inaccessible, mostly due to a lack of technologies operating at the microscale. Here, we employed a unique combination of microfluidics, miniaturized temperature control, and chlorophyll fluorometry to characterize the single-cell heterogeneity among five representative species within the Symbiodiniaceae family under temperature stress. We monitored single-cell maximum quantum yields (Fv/Fm) of photosystem (PS) II under increasing temperature stress (22‒39 °C, + 1 °C every 15 min), and detected a significant Fv/Fm reduction at lineage-specific temperatures ranging from 28 °C to 34 °C alongside a 40- to 180- fold increase in intraspecific heterogeneity under elevated temperatures (>31 °C). We discovered that the initial Fv/Fm of a cell could predict the same cell's ability to perform PSII photochemistry under moderate temperature stress (<32 °C), suggesting its use as a proxy for measuring the thermal sensitivity among Symbiodiniaceae. In combination, our study highlights the heterogeneous thermal sensitivity among photosynthetic Symbiodiniaceae and adds critical resolution to our understanding of temperature-induced coral bleaching.

A modified FCCS procedure applied to Ly49A-MHC class I cis-interaction studies in cell membranes.

The activity of natural killer (NK) cells is regulated by a fine-tuned balance between activating and inhibitory receptors. Dual-color fluorescence cross-correlation spectroscopy (FCCS) was used to directly demonstrate a so-called cis-interaction between a member of the inhibitory NK cell receptor family Ly49 (Ly49A), and its ligand, the major histocompatibility complex (MHC) class I, within the plasma membrane of the same cell. By a refined FCCS model, calibrated by positive and negative control experiments on cells from the same lymphoid cell line, concentrations and diffusion coefficients of free and interacting proteins could be determined on a collection of cells. Using the intrinsic intercellular variation of their expression levels for titration, it was found that the fraction of Ly49A receptors bound in cis increase with increasing amounts of MHC class I ligand. This increase shows a tendency to be more abrupt than for a diffusion limited - three dimensional bimolecular reaction, which most likely reflects the two-dimensional confinement of the reaction. For the Ly49A- MHC class I interaction it indicates that within a critical concentration range the local concentration level of MHC class I can provide a distinct regulation mechanism of the NK cell activity.

Natural killer cell education in mice with single or multiple major histocompatibility complex class I molecules.

The ability of murine NK cells to reject cells lacking self MHC class I expression results from an in vivo education process. To study the impact of individual MHC class I alleles on this process, we generated mice expressing single MHC class I alleles (K(b), D(b), D(d), or L(d)) or combinations of two or more alleles. All single MHC class I mice rejected MHC class I-deficient cells in an NK cell-dependent way. Expression of K(b) or D(d) conveyed strong rejection of MHC class I-deficient cells, whereas the expression of D(b) or L(d) resulted in weaker responses. The educating impact of weak ligands (D(b) and L(d)) was further attenuated by the introduction of additional MHC class I alleles, whereas strong ligands (K(b) and D(d)) maintained their educating impact under such conditions. An analysis of activating and inhibitory receptors in single MHC class I mice suggested that the educating impact of a given MHC class I molecule was controlled both by the number of NK cells affected and by the strength of each MHC class I-Ly49 receptor interaction, indicating that NK cell education may be regulated by a combination of qualitative and quantitative events.

The strength of inhibitory input during education quantitatively tunes the functional responsiveness of individual natural killer cells.

Natural killer (NK) cells express inhibitory receptors for major histocompatibility complex (MHC) class I. If self-MHC is down-regulated or absent, lack of inhibition triggers "missing self" killing. NK cells developing in the absence of MHC class I are hypo-responsive, demonstrating that MHC class I molecules are required for NK-cell education. Here, we show that the number and the type of MHC class I alleles that are present during NK-cell education quantitatively determine the frequency of responding NK cells, the number of effector functions in individual NK cells, and the amount of interferon-gamma production in NK cells of specific Ly49 subsets. A relationship between the extent of inhibitory signals during education and functional responsiveness was corroborated by an enhanced probability of NK cells expressing more than one inhibitory receptor for a single host self-MHC class I allele to degranulate after activation. Our data suggest that the capacity of an individual NK cell to respond to stimulation is quantitatively controlled by the extent of inhibitory signals that are received from MHC class I molecules during NK-cell education.

In-Line Analysis of Organ-on-Chip Systems with Sensors: Integration, Fabrication, Challenges, and Potential.

Organ-on-chip systems are promising new in vitro research tools in medical, pharmaceutical, and biological research. Their main benefit, compared to standard cell culture platforms, lies in the improved in vivo resemblance of the cell culture environment. A critical aspect of these systems is the ability to monitor both the cell culture conditions and biological responses of the cultured cells, such as proliferation and differentiation rates, release of signaling molecules, and metabolic activity. Today, this is mostly done using microscopy techniques and off-chip analytical techniques and assays. Integrating in situ analysis methods on-chip enables improved time resolution, continuous measurements, and a faster read-out; hence, more information can be obtained from the developed organ and disease models. Integrated electrical, electrochemical, and optical sensors have been developed and used for chemical analysis in lab-on-a-chip systems for many years, and recently some of these sensing principles have started to find use in organ-on-chip systems as well. This perspective review describes the basic sensing principles, sensor fabrication, and sensor integration in organ-on-chip systems. The review also presents the current state of the art of integrated sensors and discusses future potential. We bring a technological perspective, with the aim of introducing in-line sensing and its promise to advance organ-on-chip systems and the challenges that lie in the integration to researchers without expertise in sensor technology.

A microscopy-compatible temperature regulation system for single-cell phenotype analysis - demonstrated by thermoresponse mapping of microalgae.

This work describes a programmable heat-stage compatible with in situ microscopy for the accurate provision of spatiotemporally defined temperatures to different microfluidic devices. The heat-stage comprises an array of integrated thin-film Joule heaters and resistance temperature detectors (RTDs). External programming of the heat-stage is provided by a custom software program connected to temperature controllers and heater-sensor pairs. Biologically relevant (20-40 °C) temperature profiles can be supplied to cells within microfluidic devices as spatial gradients (0.5-1.5 °C mm-1) or in a time-varying approach via e.g. step-wise or sinusoidally varying profiles with negligible temperature over-shoot. Demonstration of the device is achieved by exposing two strains of the coral symbiont Symbiodinium to different temperature profiles while monitoring their single-cell photophysiology via chlorophyll fluorometry. This revealed that photophysiological responses to temperature depended on the exposure duration, exposure magnitude and strain background. Moreover, thermal dose analysis suggested that cell acclimatisation occurs under longer temperature (6 h) exposures but not under shorter temperature exposures (15 min). As the thermal sensitivity of Symbiodinium mediates the thermal tolerance in corals, our versatile technology now provides unique possibilities to research this interdependency at single cell resolution. Our results also show the potential of this heat-stage for further applications in fields such as biotechnology and ecotoxicology.

Organ-on-a-chip technology: a novel approach to investigate cardiovascular diseases.

The development of organs-on-chip (OoC) has revolutionized in vitro cell-culture experiments by allowing a better mimicry of human physiology and pathophysiology that has consequently led researchers to gain more meaningful insights into disease mechanisms. Several models of hearts-on-chips and vessels-on-chips have been demonstrated to recapitulate fundamental aspects of the human cardiovascular system in the recent past. These 2D and 3D systems include synchronized beating cardiomyocytes in hearts-on-chips and vessels-on-chips with layer-based structures and the inclusion of physiological and pathological shear stress conditions. The opportunities to discover novel targets and to perform drug testing with chip-based platforms have substantially enhanced, thanks to the utilization of patient-derived cells and precise control of their microenvironment. These organ models will provide an important asset for future approaches to personalized cardiovascular medicine and improved patient care. However, certain technical and biological challenges remain, making the global utilization of OoCs to tackle unanswered questions in cardiovascular science still rather challenging. This review article aims to introduce and summarize published work on hearts- and vessels-on chips but also to provide an outlook and perspective on how these advanced in vitro systems can be used to tailor disease models with patient-specific characteristics.

Quenching of triplet state fluorophores for studying diffusion-mediated reactions in lipid membranes.

An approach to study bimolecular interactions in model lipid bilayers and biological membranes is introduced, exploiting the influence of membrane-associated electron spin resonance labels on the triplet state kinetics of membrane-bound fluorophores. Singlet-triplet state transitions within the dye Lissamine Rhodamine B (LRB) were studied, when free in aqueous solutions, with LRB bound to a lipid in a liposome, and in the presence of different local concentrations of the electron spin resonance label TEMPO. By monitoring the triplet state kinetics via variations in the fluorescence signal, in this study using fluorescence correlation spectroscopy, a strong fluorescence signal can be combined with the ability to monitor low-frequency molecular interactions, at timescales much longer than the fluorescence lifetimes. Both in solution and in membranes, the measured relative changes in the singlet-triplet transitions rates were found to well reflect the expected collisional frequencies between the LRB and TEMPO molecules. These collisional rates could also be monitored at local TEMPO concentrations where practically no quenching of the excited state of the fluorophores can be detected. The proposed strategy is broadly applicable, in terms of possible read-out means, types of molecular interactions that can be followed, and in what environments these interactions can be measured.

Pair Correlation Analysis Maps the Dynamic Two-Dimensional Organization of Natural Killer Cell Receptors at the Synapse.

In living systems, the contact between cells is the basis of recognition, differentiation, and orchestration of an immune response. Obstacles and barriers to biomolecular motion, especially for receptors at cellular synapses, critically control these functions by creating an anisotropic environment. Whereas conventional fluorescence fluctuation methods, such as fluorescence correlation spectroscopy or fluorescence recovery after photobleaching, can only measure the isotropic diffusion of molecules, the two-dimensional pair correlation function (2D-pCF) approach probes the anisotropic paths at different spatial locations within an image, allowing the creation of high-resolution maps that can visualize and quantify how molecules move in a living cell. In this work, we show how the 2D-pCF method maps the environment in cellular synapses as perceived by natural killer (NK) cell receptors. In cultured human HLA null 721.221 cells, 2D-pCF reveals the motion of inhibitory receptor HLA-Cw4-YFP coexpressed with KIR3DL1 to be highly directional around specific loci, while these restrictions were absent in the case of HLA-B51-YFP coexpressed with KIR2DL1. Further, in freshly isolated educated (H-2Dd) and uneducated (MHC-/-) primary murine NK cells, the 2D-pCF method shows significant differences in the paths taken by activating receptor NKp46 and inhibitory receptor Ly49A in educated compared to uneducated cells. Altogether, we demonstrate that the 2D-pCF method is very powerful in informing about the spatial organization of motion in cells. Our data support the hypothesis that flexibility in the spatial arrangement of membrane receptors, that is, the absence of barriers, is crucial for NK cell function.