Starch-dependent sodium accumulation in the leaves of Vigna riukiuensis.

This research provides insight into a unique salt tolerance mechanism of Vigna riukiuensis. V. riukiuensis is one of the salt-tolerant species identified from the genus Vigna. We have previously reported that V. riukiuensis accumulates a higher amount of sodium in the leaves, whereas V. nakashimae, a close relative of V. riukiuensis, suppresses sodium allocation to the leaves. We first suspected that V. riukiuensis would have developed vacuoles for sodium sequestration, but there were no differences compared to a salt-sensitive species V. angularis. However, many starch granules were observed in the chloroplasts of V. riukiuensis. In addition, forced degradation of leaf starch by shading treatment resulted in no radio-Na (22Na) accumulation in the leaves. We performed SEM-EDX to locate Na in leaf sections and detected Na in chloroplasts of V. riukiuensis, especially around the starch granules but not in the middle of. Our results could provide the second evidence of the Na-trapping system by starch granules, following the case of common reed that accumulates starch granule at the shoot base for binding Na.

Characterization of zinc uptake and translocation visualized with positron-emitting 65Zn tracer and analysis of transport-related gene expression in two Lotus japonicus accessions.

BACKGROUND AND AIMS: Zinc (Zn) is an essential element for humans and plants. However, Zn deficiency is widespread and 25 % of the world's population is at risk of Zn deficiency. To overcome the deficiency of Zn intake, crops with high Zn content are required. However, most crop-producing areas have Zn-deficient soils, therefore crops with excellent Zn uptake/transport characteristics (i.e. high Zn efficiency) are needed. Our objective was to identify the crucial factors responsible for high Zn efficiency in the legume Lotus japonicus. METHODS: We evaluated Zn efficiency by static and real-time visualization of radioactive Zn (65Zn) uptake/transport in two L. japonicus accessions, MG-20 and B-129, that differ in Zn efficiency. The combination of visualization methods verified the dynamics of Zn accumulation and transport within the plant. We compared gene expression under a normal Zn concentration (control) and Zn deficiency to evaluate genetic factors that may determine the differential Zn efficiency of the accessions. KEY RESULTS: The accession B-129 accumulated almost twice the amount of Zn as MG-20. In the static 65Zn images, 65Zn accumulated in meristematic tissues, such as root tips and the shoot apex, in both accessions. The positron-emitting tracer imaging system (PETIS), which follows the transport process in real time, revealed that 65Zn transport to the shoot was more rapid in B-129 than in MG-20. Many genes associated with Zn uptake and transport were more highly expressed in B-129 than in MG-20 under the control condition. These gene expression patterns under Zn deficiency differed from those under the control Zn condition. CONCLUSIONS: PETIS confirmed that the real-time transport of 65Zn to the shoot was faster in B-129 than in MG-20. The high Zn efficiency of B-129 may be due to the elevated expression of a suite of Zn uptake- and transport-related genes.

Diversity of Na+ allocation in salt-tolerant species of the genus Vigna.

Wild species in the genus Vigna are a great resource of tolerance to various stresses including salinity. We have previously screened the genetic resources of the genus Vigna and identified several accessions that have independently evolved salt tolerance. However, many aspects of such tolerance have remained unknown. Thus, we used autoradiography with radioactive sodium (22Na+) and Inductively Coupled Plasma Mass Spectrometry (ICP-MS) to visualize and compare Na+ allocation in Vigna angularis (Willd.) Ohwi & H.Ohashi (azuki bean), Vigna nakashimae (Ohwi) Ohwi & H.Ohashi, Vigna riukiuensis (Ohwi) Ohwi & H.Ohashi, Vigna luteola (Jacq.) Benth. and Vigna marina (Burm.) Merr.. The results indicated: 1) Tolerant accessions suppress Na+ accumulation compared to azuki bean. 2) V. nakashimae and V. marina does so by accumulating higher amount of K+, whereas V. riukiuensis and V. luteola does so by other mechanisms. 3) V. luteola avoids salt-shedding by allocating excess Na+ to newly expanded leaves. As the mechanisms of the tolerant species were different, they could be piled up in a single crop via classical breeding or by genetic engineering or genome editing.

Noninvasive imaging of hollow structures and gas movement revealed the gas partial-pressure-gradient-driven long-distance gas movement in the aerenchyma along the leaf blade to submerged organs in rice.

Rice (Oryza sativa) plants have porous or hollow organs consisting of aerenchyma, which is presumed to function as a low-resistance diffusion pathway for air to travel from the foliage above the water to submerged organs. However, gas movement in rice plants has yet to be visualized in real time. In this study involving partially submerged rice plants, the leaves emerging from the water were fed nitrogen-13-labeled nitrogen ([13 N]N2 ) tracer gas, and the gas movement downward along the leaf blade, leaf sheath, and internode over time was monitored. The [13 N]N2 gas arrived at the bottom of the plant within 10 min, which was 20 min earlier than carbon-11 photoassimilates. The [13 N]N2 gas movement was presumably mediated by diffusion along the aerenchyma network from the leaf blade to the root via nodes functioning as junctions, which were detected by X-ray computed tomography. These findings imply the diffusion of gas along the aerenchyma, which does not consume energy, has enabled plants to adapt to aquatic environments. Additionally, there were no major differences in [13 N]N2 gas movement between paddy rice and deepwater rice plants, indicative of a common aeration mechanism in the two varieties, despite the difference in their response to flooding.

AtFLL2, a member of the FLO2 gene family, affects the enlargement of leaves at the vegetative stage and facilitates the regulation of carbon metabolism and flow.

Arabidopsis thaliana FLL2, a member of the FLO2 gene family, is expressed specifically in green leaves. The fll2 mutant showed significantly large rosette leaves and reduced the chlorophyll content. The sucrose content was significantly reduced. The glucose content was higher during the vegetative growth stage but decreased during the early reproductive growth stage. The amount of assimilated starch was lower than that in the wild type plant. The expression levels of genes involved in biosynthesis of sucrose and starch were largely altered. These results suggest that, in the fll2 mutant, a small amount of photosynthetic products was used for the biosynthesis of starch, and the products were supplied to promote intracellular growth of the source organs or for transport to the sink organs. These findings suggest that FLL2 is a factor affecting the expression level of genes involved in sugar metabolism, whose mutation caused a change in the assimilated products. Abbreviations : DAS: days after sowing.

Crosstalk Reduction Using a Dual Energy Window Scatter Correction in Compton Imaging.

Compton cameras can simultaneously detect multi-isotopes; however, when simultaneous imaging is performed, crosstalk artifacts appear on the images obtained using a low-energy window. In conventional single-photon emission computed tomography, a dual energy window (DEW) subtraction method is used to reduce crosstalk. This study aimed to evaluate the effectiveness of employing the DEW technique to reduce crosstalk artifacts in Compton images obtained using low-energy windows. To this end, in this study, we compared reconstructed images obtained using either a photo-peak window or a scatter window by performing image subtraction based on the differences between the two images. Simulation calculations were performed to obtain the list data for the Compton camera using a 171 and a 511 keV point source. In the images reconstructed using these data, crosstalk artifacts were clearly observed in the images obtained using a 171 keV photo-peak energy window. In the images obtained using a scatter window (176-186 keV), only crosstalk artifacts were visible. The DEW method could eliminate the influence of high-energy sources on the images obtained with a photo-peak window, thereby improving quantitative capability. This was also observed when the DEW method was used on experimentally obtained images.

Arabidopsis thaliana FLO2 is Involved in Efficiency of Photoassimilate Translocation, Which is Associated with Leaf Growth and Aging, Yield of Seeds and Seed Quality.

FLO2, FLOURY ENDOSPERM 2, is highly conserved in higher plants, and rice FLO2 has been predicted to be involved in regulation of accumulation of storage compounds. We analyzed the function of Arabidopsis thaliana FLO2 (AtFLO2) because A. thaliana set structurally different seeds from those of rice. Although the flo2 mutant of A. thaliana showed normal germination, inflorescence and morphogenesis of flowers, peculiar phenotypes on leaves and siliques were observed, suggesting that this gene played important roles during both the vegetative and reproductive stages. The mutant leaves showed a decrease in chloroplast numbers, and increased total biomass with faster growth. When grown in high light intensity conditions, it was observed that aging events were induced. The flo2 mutant showed depressed transportation of photoassimilates into the sink organs. In the reproductive stage, the flo2 mutant had significantly smaller size siliques, causing a reduced yield of seeds. These seeds were structurally weak, and the quality of seeds was significantly lowered, with reduction of accumulation of storage compounds by seeds. A positron-emitting tracer imaging system (PETIS) analysis detected a decreased amount of photoassimilate transport in the flo2 mutant. Therefore, it was presumed that the phenotypes of the flo2 mutant were caused by reduced performance of translocation or transportation of the photoassimilates. Our observation suggests that AtFLO2 is strongly involved in regulation of translocation and transport of assimilates, and contributes greatly to quality control of the various processes involving substance supply or transfer, such as photoassimilation, leaf enlargement, yield of seeds in a silique and accumulation of seed storage compounds.

Base to Tip and Long-Distance Transport of Sodium in the Root of Common Reed [Phragmites australis (Cav.) Trin. ex Steud.] at Steady State Under Constant High-Salt Conditions.

We analyzed the directions and rates of translocation of sodium ions (Na(+)) within tissues of a salt-tolerant plant, common reed [Phragmites australis (Cav.) Trin. ex Steud.], and a salt-sensitive plant, rice (Oryza sativa L.), under constant high-salt conditions using radioactive (22)Na tracer and a positron-emitting tracer imaging system (PETIS). First, the test plants were incubated in a nutrient solution containing 50 mM NaCl and a trace level of (22)Na for 24 h (feeding step). Then the original solution was replaced with a fresh solution containing 50 mM NaCl but no (22)Na, in which the test plants remained for >48 h (chase step). Non-invasive dynamic visualization of (22)Na distribution in the test plants was conducted during feeding and chase steps with PETIS. Our results revealed that (22)Na was absorbed in the roots of common reed, but not transported to the upper shoot beyond the shoot base. During the chase step, a basal to distal movement of (22)Na was detected within the root tissue over >5 cm with a velocity of approximately 0.5 cm h(-1). On the other hand, (22)Na that was absorbed in the roots of rice was continuously translocated to and accumulated in the whole shoot. We concluded that the basal roots and the shoot base of common reed have constitutive functions of Na(+) exclusion only in the direction of root tips, even under constant high-salt conditions. This function apparently may contribute to the low Na(+) concentration in the upper shoot and high salt tolerance of common reed.

A kinetic analysis of cadmium accumulation in a Cd hyper-accumulator fern, Athyrium yokoscense and tobacco plants.

Cadmium (Cd) accumulations in a Cd hyper-accumulator fern, Athyrium yokoscense (Ay), and tobacco, Nicotiana tabacum (Nt), were kinetically analysed using the positron-emitting tracer imaging system under two medium conditions (basal and no-nutrient). In Ay, maximumly 50% and 15% of the total Cd accumulated in the distal roots and the shoots under the basal condition, respectively. Interestingly, a portion of the Cd in the distal roots returned to the medium. In comparison with Ay, a little fewer Cd accumulations in the distal roots and clearly higher Cd migration to the shoots were observed in Nt under the basal condition (maximumly 40% and 70% of the total Cd, respectively). The no-nutrient condition down-regulated the Cd migration in both species, although the regulation was highly stricter in Ay than in Nt (almost no migration in Ay and around 20% migration in Nt). In addition, the present work enabled to estimate physical and physiological Cd accumulation capacities in the distal roots, and demonstrated condition-dependent changes especially in Ay. These results clearly suggested occurrences of species-/condition-specific regulations in each observed parts. It is probable that integration of these properties govern the specific Cd tolerance/accumulation in Ay and Nt.

A triple-imaging-modality system for simultaneous measurements of prompt gamma photons, prompt x-rays, and induced positrons during proton beam irradiation.

Objective. Prompt gamma photon, prompt x-ray, and induced positron imaging are possible methods for observing a proton beam's shape from outside the subject. However, since these three types of images have not been measured simultaneously nor compared using the same subject, their advantages and disadvantages remain unknown for imaging beam shapes in therapy. To clarify these points, we developed a triple-imaging-modality system to simultaneously measure prompt gamma photons, prompt x-rays, and induced positrons during proton beam irradiation to a phantom.Approach. The developed triple-imaging-modality system consists of a gamma camera, an x-ray camera, and a dual-head positron emission tomography (PET) system. During 80 MeV proton beam irradiation to a polymethyl methacrylate (PMMA) phantom, imaging of prompt gamma photons was conducted by the developed gamma camera from one side of the phantom. Imaging of prompt x-rays was conducted by the developed x-ray camera from the other side. Induced positrons were measured by the developed dual-head PET system set on the upper and lower sides of the phantom.Main results. With the proposed triple-imaging-modality system, we could simultaneously image the prompt gamma photons and prompt x-rays during proton beam irradiation. Induced positron distributions could be measured after the irradiation by the PET system and the gamma camera. Among these imaging modalities, image quality was the best for the induced positrons measured by PET. The estimated ranges were actually similar to those imaged with prompt gamma photons, prompt x-rays and induced positrons measured by PET.Significance. The developed triple-imaging-modality system made possible to simultaneously measure the three different beam images. The system will contribute to increasing the data available for imaging in therapy and will contribute to better estimating the shapes or ranges of proton beam.

Development of DynamicMC for PHITS Monte Carlo package.

Previously, we have developed DynamicMC for modeling relative movement of Oak Ridge National Laboratory phantom in a radiation field for the Monte Carlo N-Particle package (Health Physics. 2023,124(4):301-309). Using this software, three-dimensional dose distributions in a phantom irradiated by a certain mono-energetic (Mono E) source can be deduced through its graphical user interface. In this study, we extended DynamicMC to be used in combination with the Particle and Heavy Ion Transport code System (PHITS) by providing it with a higher flexibility for dynamic movement for an anthropomorphic phantom. For this purpose, we implemented four new functions into the software, which are (1) to generate not only Mono E sources but also those having an energy spectrum of an arbitrary radioisotope (2) to calculate the absorbed doses for several radiologically important organs (3) to automatically average the calculated absorbed doses along the path of the phantom and (4) to generate user-defined slab shielding materials. The first and third items utilize the PHITS-specific modalities named radioisotope-source and sumtally functions, respectively. The computational cost and complexity can be dramatically reduced with these features. We anticipate that the present work and the developed open-source tools will be in the interest of nuclear radiation physics community for research and teaching purposes.

Three-dimensional and multienergy gamma-ray simultaneous imaging by using a Si/CdTe Compton camera.

PURPOSE: To develop a silicon (Si) and cadmium telluride (CdTe) imaging Compton camera for biomedical application on the basis of technologies used for astrophysical observation and to test its capacity to perform three-dimensional (3D) imaging. MATERIALS AND METHODS: All animal experiments were performed according to the Animal Care and Experimentation Committee (Gunma University, Maebashi, Japan). Flourine 18 fluorodeoxyglucose (FDG), iodine 131 ((131)I) methylnorcholestenol, and gallium 67 ((67)Ga) citrate, separately compacted into micro tubes, were inserted subcutaneously into a Wistar rat, and the distribution of the radioisotope compounds was determined with 3D imaging by using the Compton camera after the rat was sacrificed (ex vivo model). In a separate experiment, indium 111((111)In) chloride and (131)I-methylnorcholestenol were injected into a rat intravenously, and copper 64 ((64)Cu) chloride was administered into the stomach orally just before imaging. The isotope distributions were determined with 3D imaging after sacrifice by means of the list-mode-expectation-maximizing-maximum-likelihood method. RESULTS: The Si/CdTe Compton camera demonstrated its 3D multinuclear imaging capability by separating out the distributions of FDG, (131)I-methylnorcholestenol, and (67)Ga-citrate clearly in a test-tube-implanted ex vivo model. In the more physiologic model with tail vein injection prior to sacrifice, the distributions of (131)I-methylnorcholestenol and (64)Cu-chloride were demonstrated with 3D imaging, and the difference in distribution of the two isotopes was successfully imaged although the accumulation on the image of (111)In-chloride was difficult to visualize because of blurring at the low-energy region. CONCLUSION: The Si/CdTe Compton camera clearly resolved the distribution of multiple isotopes in 3D imaging and simultaneously in the ex vivo model.

Application of glutathione to roots selectively inhibits cadmium transport from roots to shoots in oilseed rape.

Glutathione is a tripeptide involved in various aspects of plant metabolism. This study investigated the effects of the reduced form of glutathione (GSH) applied to specific organs (source leaves, sink leaves, and roots) on cadmium (Cd) distribution and behaviour in the roots of oilseed rape plants (Brassica napus) cultured hydroponically. The translocation ratio of Cd from roots to shoots was significantly lower in plants that had root treatment of GSH than in control plants. GSH applied to roots reduced the Cd concentration in the symplast sap of root cells and inhibited root-to-shoot Cd translocation via xylem vessels significantly. GSH applied to roots also activated Cd efflux from root cells to the hydroponic solution. Inhibition of root-to-shoot translocation of Cd was visualized, and the activation of Cd efflux from root cells was also shown by using a positron-emitting tracer imaging system (PETIS). This study investigated a similar inhibitory effect on root-to-shoot translocation of Cd by the oxidized form of glutathione, GSSG. Inhibition of Cd accumulation by GSH was abolished by a low-temperature treatment. Root cells of plants exposed to GSH in the root zone had less Cd available for xylem loading by actively excluding Cd from the roots. Consequently, root-to-shoot translocation of Cd was suppressed and Cd accumulation in the shoot decreased.

Visualization of the initial radiocesium dynamics after penetration in living apple trees with bark removal using a positron-emitting 127Cs tracer.

Following the Fukushima nuclear accident in March 2011, radiocesium (rCs) contamination in deciduous trees remains over 10 years later even though the trees were leafless at the time of the accident. This phenomenon is considered to be the result of repeated retranslocation of rCs that initially penetrated the bark into the internal tissues. To implement effective measures after a possible accident in the future, it is necessary to clarify how rCs is translocated in the tree after penetration. In this study, rCs translocation was dynamically visualized using a positron-emitting tracer imaging system (PETIS) and autoradiography after the bark of apple branches was removed. The PETIS results showed the translocation of 127Cs from the branch to young shoots and the main stem in apple trees under controlled spring growing conditions. The transport velocity of rCs in the branch was faster than that in the main stem. The transport of rCs, which was either acropetal or basipetal, in the main stem through the branch junction favored basipetal movement. Autoradiography of transverse sections of the main stem indicated that basipetal translocation was due to transport in the phloem. This study demonstrated the initial translocation responses of rCs similar to previous field research, which indicates that rCs transport to the young shoots tends to be higher under controlled conditions. Our laboratory-based experimental system may be useful to gain an improved understanding of rCs dynamics in deciduous trees.

Prompt X-ray imaging during irradiation with spread-out Bragg peak (SOBP) beams of carbon ions.

Prompt secondary electron bremsstrahlung X-ray (prompt X-ray) imaging using a low-energy X-ray camera is a promising method for observing a beam shape from outside the subject. However, such imaging has so far been conducted only for pencil beams without a multi-leaf collimator (MLC). The use of spread-out Bragg peak (SOBP) with an MLC may increase the scattered prompt gamma photons and decrease the contrast of the images of prompt X-rays. Consequently, we performed prompt X-ray imaging of SOBP beams formed with an MLC. This imaging was carried out in list mode during irradiation of SOBP beams to a water phantom. An X-ray camera with a 1.5-mm diameter as well as 4-mm-diameter pinhole collimators was used for the imaging. List mode data were sorted to obtain the SOBP beam images as well as energy spectra and time count rate curves. Due to the high background counts from the scattered prompt gamma photons penetrating the tungsten shield of the X-ray camera, the SOBP beam shapes were difficult to observe with a 1.5-mm-diameter pinhole collimator. With the 4-mm-diameter pinhole collimators, images of SOBP beam shapes at clinical dose levels could be obtained with the X-ray camera. The use of a 4-mm-diameter pinhole collimator attached to the X-ray camera is effective for prompt X-ray imaging with high sensitivity and low background counts. This approach makes it possible to image SOBP beams with an MLC when the counts are low and the background levels are high.

Estimating blurless and noise-free Ir-192 source images from gamma camera images for high-dose-rate brachytherapy using a deep-learning approach.

Objective. Precise monitoring of the position and dwell time of iridium-192 (Ir-192) during high-dose-rate (HDR) brachytherapy is crucial to avoid serious damage to normal tissues. Source imaging using a compact gamma camera is a potential approach for monitoring. However, images from the gamma camera are affected by blurring and statistical noise, which impact the accuracy of source position monitoring. This study aimed to develop a deep-learning approach for estimating ideal source images that reduce the effect of blurring and statistical noise from experimental images captured using a compact gamma camera.Approach. A double pix2pix model was trained using the simulated gamma camera images of an Ir-192 source. The first model was responsible for denoising the Ir-192 images, whereas the second model performed super resolution. Trained models were then applied to the experimental images to estimate the ideal images.Main results. At a distance of 100 mm between the compact gamma camera and the Ir-192 source, the difference in full width at half maximum (FWHM) between the estimated and actual source sizes was approximately 0.5 mm for a measurement time of 1.5 s. This difference has been improved from approximately 2.7 mm without the use of DL. Even with a measurement time of 0.1 s, the ideal images could be estimated as accurately as in the 1.5 s measurements. This method consistently achieved accurate estimations of the source images at any position within the field of view; however, the difference increased with the distance between the Ir-192 source and the compact gamma camera.Significance. The proposed method successfully provided estimated images from the experimental images within errors smaller than 0.5 mm at 100 mm. This method is promising for reducing blurring and statistical noise from the experimental images, enabling precise real-time monitoring of Ir-192 sources during HDR brachytherapy.

ADP-glucose pyrophosphorylase genes are differentially regulated in sugar-dependent or -independent manners in tomato (Solanum lycopersicum L.) fruit.

In early developing tomato (Solanum lycopersicum L.) fruit, starch accumulates at high levels and is used by various primary metabolites in ripening fruits. ADP-glucose pyrophosphorylase is responsible for the first key step of starch biosynthesis. Although it has been reported that AgpL1 and AgpS1 isoforms are mainly expressed in early developing fruit, their regulatory mechanism has not been elucidated. The present study investigated the transcriptional response of AgpL1 and AgpS1 to various metabolizable sugars, nonmetabolizable sugar analogues, hexokinase inhibitors and proline by an experimental system using half-cut fruits. AgpL1 was upregulated in response to sucrose and constituted hexoses such glucose, whereas the AgpS1 gene almost did not exhibit a prominent sugar response. Further analyses revealed that other disaccharides such maltose and trehalose did not show a remarkable effect on both AgpL1 and AgpS1 expressions. These results indicate that there are two distinct regulatory mechanisms, namely, sugar metabolism-dependent and -independent, for the regulation of AGPase gene expression. Interestingly, the ADP treatment, a hexokinase inhibitors, cancelled the sugar response of AgpL1, indicating that hexokinase-mediated sugar signaling should be involved in the sugar response of AgpL1. These results suggest that sugar-dependent (AgpL1) and sugar-independent (AgpS1) pathways coordinatively regulate starch biosynthesis in immature tomato fruit.

Simultaneous imaging of luminescence and prompt x-rays during irradiation with spot-scanning proton beams at clinical dose level.

Prompt x-ray imaging is a promising method for observing the beam shape from outside a subject. However, its distribution is different from dose distribution, and thus a comparison with the dose is required. Meanwhile, luminescence imaging of water is a possible method for imaging the dose distribution. Consequently, we performed simultaneous imaging of luminescence and prompt x-rays during irradiation by proton beams to compare the distributions between these two different imaging methods. Optical imaging of water was conducted with spot-scanning proton beams at clinical dose level during irradiation to a fluorescein (FS) water phantom set in a black box. Prompt x-ray imaging was also conducted simultaneously from outside the black box using a developed x-ray camera during proton beam irradiation to the phantom. We measured images of the luminescence of FS water and prompt x-rays for various types of proton beams, including pencil beams, spread-out Bragg peak (SOBP) beams, and clinically used therapy beams. After the imaging, ranges were estimated from FS water and prompt x-rays and compared with those calculated with a treatment planning system (TPS). We could measure the prompt x-ray and FS water images simultaneously for all types of proton beams. The ranges estimated from the FS water and those calculated with the TPS closely matched, within a difference of several mm. Similar range difference was found between the results estimated from prompt x-ray images and those calculated with the TPS. We confirmed that the simultaneous imaging of luminescence and prompt x-rays were possible during irradiation with spot-scanning proton beams at a clinical dose level. This method can be applied to range estimation as well as comparison with the dose for prompt x-ray imaging or other imaging methods used in therapy with various types of proton beams at a clinical dose level.

DynamicMC: An Open-source GUI Program Coupled with MCNP for Modeling Relative Dynamic Movement of Radioactive Source and ORNL Phantom in a 3-dimensional Radiation Field.

ABSTRACT: The present work introduces an open-source graphical user interface (GUI) computer program called DynamicMC. The present program has the ability to generate ORNL phantom input script for the Monte Carlo N-Particle (MCNP) package. The relative dynamic movement of the radiation source with respect to the ORNL phantom can be modeled, which essentially resembles the dynamic movement of source-to-target (i.e., human phantom) distance in a 3-dimensional radiation field. The present program makes the organ-based dosimetry of the human body much easier, as users are not required to write lengthy scripts or deal with any programming that many may find tedious, time consuming, and error prone. In this paper, we have demonstrated that the present program can successfully model simple and complex relative dynamic movements (i.e., those involving rotation of source and human phantom in a 3-dimensional field). The present program would be useful for organ-based dosimetry and could also be used as a tool for teaching nuclear radiation physics and its interaction with the human body.

Hybrid imaging of prompt x-rays and induced positrons using a pinhole gamma camera during and after irradiation of protons.

Objective. Prompt x-ray imaging using a low-energy x-ray camera is a promising method for observing a proton beam's shape from outside the subject. Furthermore, imaging of positrons produced by nuclear reactions with protons is a possible method for observing the beam shape. However, it has not been possible to measure these two types of images with a single imaging system due to the limited imaging capability of existing systems. Imaging of both prompt x-rays and the distribution of positrons may compensate for the shortcomings of each method.Approach. We conducted imaging of the prompt x-ray using a pinhole x-ray camera during irradiation with protons in list mode. Then, after irradiation with protons, imaging of annihilation radiations from the produced positrons was conducted using the same pinhole x-ray camera in list mode. After this imaging, list-mode data were sorted to obtain prompt x-ray images and positron images.Main results. With the proposed procedure, we could measure both prompt x-ray images and induced positron images with a single irradiation by a proton beam. From the prompt x-ray images, ranges and widths of the proton beams could be estimated. The distributions of positrons were slightly wider than those of the prompt x-rays. From the time sequential positron images, we could derive the time activity curves of the produced positrons.Significance. Hybrid imaging of prompt x-rays and induced positrons using a pinhole x-ray camera was achieved. The proposed procedure would be useful for measuring prompt x-ray images during irradiation to estimate the beam structures as well as for measuring the induced positron images after irradiation to estimate the distributions and time activity curves of the induced positrons.