t-Butyl-Oxycarbonylated Diamines as Building Blocks for Isocyanate-Free Polyurethane/Urea Dispersions and Coatings.

t-Butyl-oxycarbonylated diamines ("di-Boc-carbamates") are investigated as dicarbamate monomers for diamine/dicarbamate polymerizations. Polyureas (PUs) and polyurethanes (PURs) with high molecular weights are prepared from stoichiometric polymerizations of diamines or diols with N-N'-di-t-butyl-oxycarbonyl isophorone diamine (DiBoc-IPDC) using KOt-Bu as a catalyst, while gelation is observed when an excess of DiBoc-IPDC is used with respect to the diamines or diols. Stable dispersions are obtained from PUs and PURs with 3,3'-diamino-N-methyldipropylamine (DMDPA) as internal dispersing agent. The corresponding PU-based coatings exhibit superior mechanical properties and solvent resistances compared to the polyurethane urea coatings synthesized from diols, DiBoc-IPDC, and DMDPA.

Isohexide and Sorbitol-Derived, Enzymatically Synthesized Renewable Polyesters with Enhanced Tg.

Sugar-based polyesters derived from sorbitol and isohexides were obtained via solvent-free enzymatic catalysis. Pendant hydroxyl groups, coming from the sorbitol units, were present along the polyester backbone, whereas the two isohexides, namely, isomannide and isoidide dimethyl ester monomers, were selected to introduce rigidity into the polyester chains. The feasibility of incorporating isomannide as a diol compared to the isoidide dimethyl ester as acyl-donor via lipase-catalyzed polycondensation was investigated. The presence of bicyclic units resulted in enhanced Tg with respect to the parent sorbitol-containing polyester lacking isohexides. The different capability of the two isohexides to boost the thermal properties confirmed the more flexible character provided by the isoidide diester derivative. Solvent-borne coatings were prepared by cross-linking the sugar-based polyester polyols with polyisocyanates. The increased rigidity of the obtained sugar-based polyester polyols led to an enhancement in hardness of the resulting coatings.

Chemoselective Alternating Copolymerization of Limonene Dioxide and Carbon Dioxide: A New Highly Functional Aliphatic Epoxy Polycarbonate.

The alternating copolymerization of biorenewable limonene dioxide with carbon dioxide (CO2 ) catalyzed by a zinc ß-diiminate complex is reported. The chemoselective reaction results in linear amorphous polycarbonates that carry pendent methyloxiranes and exhibit glass transition temperatures (Tg ) up to 135 °C. These polycarbonates can be efficiently modified by thiols or carboxylic acids in combination with lithium hydroxide or tetrabutylphosphonium bromide as catalysts, respectively, without destruction of the main chain. Moreover, polycarbonates bearing pendent cyclic carbonates can be quantitatively prepared by CO2 insertion catalyzed by lithium bromide.

Investigation of asymmetric alcohol dehydrogenase (ADH) reduction of acetophenone derivatives: effect of charge density.

In an effort to study the effect of substituent groups of the substrate on the alcohol dehydrogenase (ADH) reductions of aryl-alkyl ketones, several derivatives of acetophenone have been evaluated against ADHs from Lactobacillus brevis (LB) and Thermoanaerobacter sp. (T). Interestingly, ketones with non-demanding (neutral) para-substituents were reduced to secondary alcohols by these enzymes in enantiomerically pure form whereas those with demanding (ionizable) substituents could not be reduced. The effect of substrate size, their solubility in the reaction medium, electron donating and withdrawing properties of the ligand and also the electronic charge density distribution on the substrate molecules have been studied and discussed in detail. From the results, it is observed that the electronic charge distribution in the substrate molecules is influencing the orientation of the substrate in the active site of the enzyme and hence the ability to reduce the substrate.

Selective enzymatic degradation of self-assembled particles from amphiphilic block copolymers obtained by the combination of N-carboxyanhydride and nitroxide-mediated polymerization.

Combining controlled radical polymerizations and a controlled polypeptide synthetic technique, such as N-carboxyanhydride (NCA) ring-opening polymerization, enables the generation of well-defined block copolymers to be easily accessible. Here we combine NCA polymerization with the nitroxide-mediated radical polymerization of poly(n-butyl acrylate) (PBA) and polystyrene (PS), using a TIPNO and SG1-based bifunctional initiator to create a hybrid block copolymer. The polypeptide block consists of (block) copolymers of poly(L-glutamic acid) embedded with various quantities of L-alanine. The formed superstructures (vesicles and micelles) of the block copolymers possessed varying degrees of enzyme responsiveness when exposed to elastase and thermolysin, resulting in controlled enzymatic degradation dictated by the polypeptide composition. The PBA containing block copolymers possessing 50% L-alanine in the polypeptide block showed a high degradation response compared to polymers containing lower L-alanine quantities. The particles stabilized by copolypeptides with L-alanine near the hydrophobic block showed full degradation within 4 days. Particles containing polystyrene blocks revealed no appreciable degradation under the same conditions, highlighting the specificity of the system and the importance of synthetic polymer selection. However, when the degradation temperature was increased to 70 °C, degradation could be achieved due to the higher block copolymer exchange between the particle and the solution. A number of novel biohybrid structures are disclosed that show promise as enzyme-responsive materials with potential use as payload release vehicles, following their controlled degradation by specific, target, enzymes.

Copolymers from unsaturated macrolactones: toward the design of cross-linked biodegradable polyesters.

The enzymatic synthesis of a series of random copolyesters by ring-opening polymerization of unsaturated macrolactones like globalide and ambrettolide with 1,5-dioxepan-2-one (DXO) and 4-methyl caprolactone (4MeCL) was investigated. (13)C NMR diad analysis confirmed the randomness of all copolymers irrespective of the comonomer ratios. Thermal investigation showed that incorporating the comonomers lowered the melting points of the polymers as compared with the macrolactone homopolymers. The decrease was dependent on the comonomer ratio. The unsaturated copolymers were thermally cross-linked using dicumyl peroxide, which resulted in completely amorphous insoluble networks. It was found that 10% incorporation of the unsaturated macolactone was sufficient to obtain a gel content of 95 wt %. Preliminary degradation tests confirm that the cross-linked copolymers are enzymatically degradable and that the incorporation of hydrophilic comonomers like DXO enhances degradation.

Well-defined biobased segmented polyureas synthesis via a TBD-catalyzed isocyanate-free route.

Via an isocyanate-free route, a series of segmented polyureas (PUs) were synthesized from (potentially) renewable resources. To the best of our knowledge, the present work shows for the first time that the organic superbase guanidine 1,5,7-triazabicyclododecene (TBD) which was originally developed as a catalyst for the ring-opening polymerization of lactones, lactides or cyclic carbonates, is also a promising catalyst for the transurethanization between dicarbamates and diamino-terminated poly(propylene glycol) (PPGda) providing PUs via an isocyanate-free strategy. The renewable segmented PUs contain monodisperse hard segments (HSs). This well-defined structure was verified by the DMTA plots of the PUs, showing a sharp glass transition, a sharp flow transition and a flat rubbery plateau. The flow and maximum use temperature (Tfl ) of the PUs increases with the increasing number of urea groups in the corresponding dicarbamates. In addition, at constant HS length, the length of the soft-segment (SS) can be changed to adjust the properties of the PU materials, enabling their application as adhesives, soft elastomers, or rigid plastics.

Autocatalytic equation describing the change in molecular weight during hydrolytic degradation of aliphatic polyesters.

The autocatalytic equation derived in this study describes and even predicts the evolution of the number average molecular weight of aliphatic polyesters upon hydrolytic degradation. The main reaction in the degradation of aliphatic polyesters is autocatalytic hydrolysis of ester bonds, which causes the molecular weight to decrease. During hydrolysis of the ester bonds in the main chain of the polyester, the chains are cleaved and the end group concentrations will rise. The fundamentals of this equation are based on that principle. To validate the derived equation, the hydrolytic degradation of poly(4-methylcaprolactone), poly(epsilon-caprolactone), poly(d,l-lactide), and two different poly(d,l-lactide-co-glycolide) copolymers was monitored after immersion in a PBS buffer (pH = 7.4) at 37 degrees C. The number average molecular weight, mass loss, and crystallinity were determined after different time intervals. The experimental results confirm that hydrolytic degradation of aliphatic polyesters is a bulk erosion process. When comparing the M(n), calculated with the new autocatalytic equation, with the experimental results, it was found that the new model can predict the decrease of the M(n) upon hydrolytic degradation for semicrystalline and amorphous polymers, as well as for copolymers, without the need for complicated mathematics and excessive input parameters. This is a major improvement with respect to earlier proposed models in literature.

Conductive Pickering-poly(high internal phase emulsion) composite foams prepared with low loadings of single-walled carbon nanotubes.

Conductive Pickering-polyHIPE composite foams are prepared using loadings of block copolymer stabilized single-walled carbon nanotubes below 0.1 wt%.

Thiol chemistry on well-defined synthetic polypeptides.

Well-defined cysteine-containing synthetic polypeptides were synthesised and the versatility of various chemical reactions on these thiol groups was investigated.

Cumulated advantages of enzymatic and carbene chemistry for the non-organometallic synthesis of (co)polyesters.

Enzymatic and carbene catalysed ring opening polymerisation can be combined in a one-pot reaction for the metal-free synthesis of degradable block copolymers.

Theoretical analysis of carbon nanotube wetting in polystyrene nanocomposites.

Besides chemical functionalisation, the use of surfactants can be applied to debundle and disperse carbon nanotubes before further application in polymer nanocomposites. In this work we present a theoretical analysis of the interaction between single-walled carbon nanotubes and sodium dodecyl sulfate as surfactant and/or polystyrene as polymer matrix using semi-empirical AM1 calculations. Results indicate that the use of short potassium sulfate-terminated polystyrene chains as an extra component can help to remove the surfactant from the nanotube surface within the matrix, resulting in improved electronic properties of the nanocomposite.

Lipase catalyzed HEMA initiated ring-opening polymerization: in situ formation of mixed polyester methacrylates by transesterification.

2-Hydroxyethyl methacrylate (HEMA) was used as initiator for the enzymatic ring-opening polymerization (ROP) of omega-pentadecalactone (PDL) and epsilon-caprolactone (CL). The lipase B from Candida antarctica was found to catalyze the cleavage of the ester bond in the HEMA end group of the formed polyesters, resulting in two major transesterification processes, methacrylate transfer and polyester transfer. This resulted in a number of different polyester methacrylate structures, such as polymers without, with one, and with two methacrylate end groups. Furthermore, the 1,2-ethanediol moiety (from HEMA) was found in the polyester products as an integral part of HEMA, as an end group (with one hydroxyl group) and incorporated within the polyester (polyester chains acylated on both hydroxyl groups). After 72 h, as a result of the methacrylate transfer, 79% (48%) of the initial amount of the methacrylate moiety (from HEMA) was situated (acylated) on the end hydroxyl group of the PPDL (PCL) polyester. In order to prepare materials for polymer networks, fully dimethacrylated polymers were synthesized in a one-pot procedure by combining HEMA-initiated ROP with end-capping using vinyl methacrylate. The novel PPDL dimethacrylate (>95% incorporated methacrylate end groups) is currently in use for polymer network formation. Our results show that initiators with cleavable ester groups are of limited use to obtain well-defined monomethacrylated macromonomers due to the enzyme-based transesterification processes. On the other hand, when combined with end-capping, well-defined dimethacrylated polymers (PPDL, PCL) were prepared.

Acrylate end-capped poly(ester-carbonate) and poly(ether-ester)s for polymer-on-multielectrode array devices: synthesis, photocuring, and biocompatibility.

Polymeric materials based on epsilon-caprolactone (CL), 1,5-dioxepan-2-one (DXO), and trimethylene carbonate (TMC) were prepared and evaluated as possible candidates for polymer-on-multielectrode (PoM) applications. CL was copolymerized with either DXO or TMC in the presence of the diol initiator 1,4-benzenedimethanol (BDM). The ring-opening polymerization experiments, carried out in bulk and using tin(II) catalysis, yielded the desired low molecular weight random copolymer diols, as evidenced by NMR, IR, MALDI-ToF MS, and DSC techniques. Upon reaction with acryloyl chloride, the corresponding diacrylate end-capped copolymers were obtained. The latter were characterized by NMR and IR spectroscopy, and their photocross-linking (in the presence of a UV initiator) was followed by ATR-FTIR spectroscopy. Transparent and soft thin films of the copoly(ether-ester) and copoly(ester-carbonate) diacrylates were prepared and cured under UV irradiation. The resulting polymeric films showed good biocompatibility properties as far as in vitro neural stem cells proliferation and differentiation to neurons and astrocytes are concerned. Noteworthy are the beneficial effects obtained upon preconditioning the copolymers by means of the cell-culture medium and the excellent properties shown particularly by the CL-TMC copolymer. Moreover, preliminary results show that microchannel formation by photocuring is possible with the synthesized polymers.

Incorporation of isosorbide into poly(butylene terephthalate) via solid-state polymerization.

The biomass-based monomer isosorbide was incorporated into poly(butylene terephthalate) (PBT) by solid-state polymerization (SSP) using the macrodiol monomer BTITB-(OH) 2, which consists of isosorbide (I), terephthalic acid (T), and 1,4-butandiol (B) residues. This macromonomer can be synthesized by a simple one-pot, two-step reaction. Polymers with number-average molecular weights up to 100,000 g x mol (-1) were readily synthesized from various ratios of PBT/BTITB-(OH) 2. Their molecular weights, thermal properties, and colors were compared with corresponding copolyesters that were obtained by melt polycondensation. We found that T m, T c, and especially T g were superior for materials that were obtained by SSP. This is ascribed to differences in the microstructures of both types of copolyesters; the SSP products exhibit a more blocky structure than do the more random melt-polymerized counterparts. The SSP method resulted in much higher molecular weights and much less colored polymers, and it seems to be the preferred route for incorporating biobased monomers that exhibit limited thermal stability into engineering plastics.

Polymers from functional macrolactones as potential biomaterials: enzymatic ring opening polymerization, biodegradation, and biocompatibility.

We systematically investigated a series of polymers derived from macrolactones, namely, pentadecalactone, hexadecalactone, and their unsaturated analogues ambrettolide and globalide as potential biomaterials. By enzymatic ring-opening polymerization these monomers can conveniently be polymerized to high molecular weight. The polymers are highly crystalline with melting points around 95 degrees C for the saturated polymers and lower melting points for the unsaturated polymers (46-55 degrees C). All polymers are nontoxic as measured by an MTT assay for metabolic cell activity of a 3T3 mouse fibroblast cell line. Degradation studies showed no hydrolytic or enzymatic degradability of the polymers, which was ascribed to the high crystallinity and hydrophobicity of the materials. The unsaturated polymers were cross-linked in the melt, yielding fully amorphous transparent materials with a gel content of 97%.

Synthesis of biodegradable chiral polyesters by asymmetric enzymatic polymerization and their formulation into microspheres.

Materials with selective bio-responsiveness could have potential in medical applications. Here we report the synthesis of chiral microspheres obtained from non-crystalline aliphatic polyesters, with the aim to use chirality to program polymer microsphere degradation. By enzymatic enantioselective kinetic resolution polymerization from racemic monomers, hydroxyl-terminated (R)-, (S)- and racemic poly-(4-methylcaprolatone) (PMCL) were successfully synthesized. Preliminary degradation experiments with Candida Antarctica Lipase B show that the degradation rate can be tuned by the polymer chirality. Chiral microspheres around 40 microns were obtained after acrylation of the polymers and subsequent in situ cross-linking in an oil-in-water (O-W) emulsion evaporation approach.

Isocyanate-Free Approach to Water-Borne Polyurea Dispersions and Coatings.

Here, an isocyanate-free approach to produce polyureas from diamines and dicarbamates as monomers is reported. A side reaction limiting the molecular weight during the diamine/ dicarbamate polymerization, that is, N-alkylation of amine end groups, is investigated. Mitigation of the N-alkylation, either by enhancing the carbamate aminolysis rate or by substitution of dimethylcarbamates with more sterically hindered diethylcarbamates, affords polyureas with sufficiently high molecular weights to assure satisfactory mechanical properties. Stable polyurea dispersions with polyamines as internal dispersing agents are prepared, and the properties of the corresponding coatings are evaluated.

Enhancing the functionality of biobased polyester coating resins through modification with citric acid.

Citric acid (CA) was evaluated as a functionality-enhancing monomer in biobased polyesters suitable for coating applications. Model reactions of CA with several primary and secondary alcohols and diols, including the 1,4:3,6-dianhydrohexitols, revealed that titanium(IV) n-butoxide catalyzed esterification reactions involving these compounds proceed at relatively low temperatures, often via anhydride intermediates. Interestingly, the facile anhydride formation from CA at temperatures around CA's melting temperature ( T m = 153 degrees C) proved to be crucial in modifying sterically hindered secondary hydroxyl end groups. OH-functional polyesters were reacted with CA in the melt between 150 and 165 degrees C, yielding slightly branched carboxylic acid functional materials with strongly enhanced functionality. The acid/epoxy curing reaction of the acid-functional polymers was simulated with a monofunctional glycidyl ether. Finally, the CA-modified polyesters were applied as coatings, using conventional cross-linking agents. The formulations showed rapid curing, resulting in chemically and mechanically stable coatings. These results demonstrate that citric acid can be applied in a new way, making use of its anhydride formation to functionalize OH-functional polyesters, which is an important new step toward fully biobased coating systems.

Unique Base-Initiated Depolymerization of Limonene-Derived Polycarbonates.

The depolymerization of poly(limonene carbonate) (PLC) initiated by 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) was investigated. The strong organic base TBD was capable of deprotonating the OH-terminated PLC, leading to fast degradation via backbiting reactions at high temperature. An interesting feature of the base-initiated breakdown of PLC lies in the quantitative depolymerization into the corresponding initial limonene oxide monomer. This result implies the complete back-to-monomer recyclability of the fully biobased PLC, which accordingly can be considered as a really sustainable material. Additionally, the stability of PLC when exposed to TBD was enhanced by an end-capping reaction, which further supported the proposed degradation pathway.