Toward New Horizons in Verdazyl-Nitroxide High-Spin Systems: Thermally Robust Tetraradical with Quintet Ground State.

High-spin organic tetraradicals with significant intramolecular exchange interactions have high potential for advanced technological applications and fundamental research, but examples reported to date exhibit limited stability and processability. In this work, we designed the first tetraradical based on an oxoverdazyl core and nitronyl nitroxide radicals and successfully synthesized it using a palladium-catalyzed cross-coupling reaction of an oxoverdazyl radical bearing three iodo-phenylene moieties with a gold(I) nitronyl nitroxide-2-ide complex in the presence of a recently developed efficient catalytic system. The molecular and crystal structures of the tetraradical were confirmed by single crystal X-ray diffraction analysis. The tetraradical possesses good thermal stability with decomposition onset at ∼125 °C in an inert atmosphere; in a toluene solution upon prolonged heating at 90 °C in air, no decomposition was observed. The resulting unique verdazyl-nitroxide conjugate was thoroughly studied using a range of experimental and theoretical techniques, such as SQUID magnetometry of polycrystalline powders, EPR spectroscopy in various matrices, cyclic voltammetry, and high-level quantum chemical calculations. All collected data confirm the high thermal stability of the resulting tetraradical and quintet multiplicity of its ground state, which makes the synthesis of this important paramagnet a new milestone in the field of creating high-spin systems.

The TaCl5-Mediated Reaction of Dimethyl 2-Phenylcyclopropane-1,1-dicarboxylate with Aromatic Aldehydes as a Route to Substituted Tetrahydronaphthalenes.

It is found that the reaction of dimethyl 2-phenylcyclopropane-1,1-dicarboxylate with 2 equivalents each of aromatic aldehydes and TaCl5 in 1,2-dichloroethane at 23 °C for 24 h after hydrolysis gives substituted 4-phenyl-3,4-dihydronaphtalene-2,2(1H)-dicarboxylates in good yield. This represents a new type of reactions between 2-arylcyclopropane-1,1-dicarboxylates and aromatic aldehydes, yielding chlorinated tetrahydronaphthalenes with a cis arrangement of the aryl and chlorine substituents in the cyclohexene moiety. A plausible reaction mechanism is proposed.

Overclocking Nitronyl Nitroxide Gold Derivatives in Cross-Coupling Reactions.

Nitronyl nitroxides are functional building blocks in cutting-edge research fields, such as the design of molecular magnets, the development of redox and photoswitchable molecular systems and the creation of redox-active components for organic and hybrid batteries. The key importance of the nitronyl nitroxide function is to translate molecular-level-optimized structures into nano-scale devices and new technologies. In spite of great importance, efficient and versatile synthetic approaches to these compounds still represent a challenge. Particularly, methods for the direct introduction of a nitronyl nitroxide moiety into aromatic systems possess many limitations. Here, we report gold derivatives of nitronyl nitroxide that can enter Pd(0)-catalysed cross-coupling reactions with various aryl bromides, affording the corresponding functionalized nitronyl nitroxides. Based on the high thermal stability and enhanced reactivity in catalytic transformation, a new reagent is suggested for the synthesis of radical systems via a universal cross-coupling approach.

Free Radicals in the Queue: Selective Successive Addition of Azide and N-Oxyl Radicals to Alkenes.

The selective successive addition of azide (•N3) and N-oxyl radicals to alkenes is demonstrated, despite each of the two radicals being known to attack C═C bonds and the mixture of radical adducts possibly being expected. The proposed radical mechanism was supported by density functional theory calculations, electron paramagnetic resonance, and radical trapping experiments. The reaction proceeds at room temperature with the available reagents: NaN3, N-hydroxy compounds, and PhI(OAc)2 as the oxidant. The method can be applied for N-hydroxyimides, N-hydroxyamides, N-hydroxybenzotriazole, and oximes as N-oxyl radical precursors. Vinylarenes, aliphatic alkenes, and even electron-deficient methyl methacrylate were successfully functionalized.

Series of Fluorinated Benzimidazole-Substituted Nitronyl Nitroxides: Synthesis, Structure, Acidity, Redox Properties, and Magnetostructural Correlations.

A special series of nitronyl nitroxides was synthesized: 2-(benzimidazol-2'-yl)-4,4,5,5-tetramethyl-4,5-dihydro-1H-imidazole-3-oxide-1-oxyls mono-, di-, tri-, or tetrafluorinated on the benzene ring. The structure of all paramagnets was unambiguously confirmed by single-crystal X-ray diffraction. It was found that in crystals, the radicals are assembled into chains due to intermolecular H-bonds between the benzimidazole moiety (H-bond donor) and the nitronyl nitroxide group or benzimidazole ring (H-bond acceptor). The magnetic properties of nitronyl nitroxides depend on the type of binding of radicals by H-bonds. The magnetic motif of 4-fluoro-, 5-fluoro-, 4,6-difluoro-, 4,5,6-trifluoro-, 4,5,7-trifluoro-, and 4,5,6,7-tetrafluoro-derivatives, as well as the nonfluorinated compound, consists of ferromagnetic chains (J/kB ≈ 20-40 K) formed by the McConnell type I mechanism. In the 5,6-difluoro- and 4,5-difluoro-derivatives, the distances between the paramagnetic centers are large, as a result of which the exchange interactions are weak. According to cyclic voltammetry, paramagnets are oxidized reversibly, while their reduction is a quasi-reversible electron transfer (EC mechanism); experimental redox potentials of radicals correlate well with the calculated values. Quantum chemical assessment of the acidity of benzimidazolyl-substituted nitronyl nitroxides revealed that the introduction of fluorine atoms into the benzene ring enhances the acidity of the paramagnets by more than 5 orders of magnitude.

Cage-like Cu5Cs4-Phenylsilsesquioxanes: Synthesis, Supramolecular Structures, and Catalytic Activity.

A small family of nonanuclear Cu5Cs4-based phenylsilsesquioxanes 1-2 were prepared by a convenient self-assembly approach and characterized by X-ray diffraction studies. The compounds 1 and 2 show some unprecedented structural features such as the presence of a [Ph14Si14O28]14- silsesquioxane ligand and a CuII5CsI4 nuclearity in which the metal cations occupy unusual positions within the cluster. Copper ions are "wrapped" into a silsesquioxane matrix, while cesium ions are located in external positions. This resulted in cesium-involved aggregation of coordination polymer structures. Both compounds 1 and 2 realize specific metallocene (cesium-phenyl) linkage between neighboring cages. Compound 2 is evaluated as a catalyst in the Baeyer-Villiger (B-V) oxidation of cyclohexanone and tandem cyclohexane oxidation/B-V oxidation of cyclohexanone with m-chloroperoxybenzoic acid (mCPBA) as an oxidant, in an aqueous acetonitrile medium, and HNO3 as the promoter. A quantitative yield of ε-caprolactone was achieved under conventional heating at 50 °C for 4 h or MW irradiation for 30 min (for cyclohexanone as substrate); 17 and 19% yields of lactone upon MW irradiation at 80 °C for 30 min and heating at 50 °C for 4 h, respectively (for cyclohexane as a substrate), were achieved. Complex 2 was evaluated as a catalyst for the oxidation of alkanes to alkyl hydroperoxides and alcohols to ketones with peroxides at 60 °C in acetonitrile. The maximum yield of cyclohexane oxidation products was 30%. Complex 2 exhibits high activity in the oxidation of alcohols.

Benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) and Its Bromo Derivatives: Molecular Structure and Reactivity.

Benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) (isoBBT) is a new electron-withdrawing building block that can be used to obtain potentially interesting compounds for the synthesis of OLEDs and organic solar cells components. The electronic structure and delocalization in benzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole), 4-bromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole), and 4,8-dibromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) were studied using X-ray diffraction analysis and ab initio calculations by EDDB and GIMIC methods and were compared to the corresponding properties of benzo[1,2-c:4,5-c']bis[1,2,5]thiadiazole (BBT). Calculations at a high level of theory showed that the electron affinity, which determines electron deficiency, of isoBBT was significantly smaller than that of BBT (1.09 vs. 1.90 eV). Incorporation of bromine atoms improves the electrical deficiency of bromobenzo-bis-thiadiazoles nearly without affecting aromaticity, which increases the reactivity of these compounds in aromatic nucleophilic substitution reactions and, on the other hand, does not reduce the ability to undergo cross-coupling reactions. 4-Bromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole) is an attractive object for the synthesis of monosubstituted isoBBT compounds. The goal to find conditions for the selective substitution of hydrogen or bromine atoms at position 4 in order to obtain compounds containing a (het)aryl group in this position and to use the remaining unsubstituted hydrogen or bromine atoms to obtain unsymmetrically substituted isoBBT derivatives, potentially interesting compounds for organic photovoltaic components, was not set before. Nucleophilic aromatic and cross-coupling reactions, along with palladium-catalyzed C-H direct arylation reactions for 4-bromobenzo[1,2-d:4,5-d']bis([1,2,3]thiadiazole), were studied and selective conditions for the synthesis of monoarylated derivatives were found. The observed features of the structure and reactivity of isoBBT derivatives may be useful for building organic semiconductor-based devices.

Unsymmetrical Pd(II) Pincer Complexes with Benzothiazole and Thiocarbamate Flanking Units: Expedient Solvent-Free Synthesis and Anticancer Potential.

Driven by the growing threat of cancer, many research efforts are directed at developing new chemotherapeutic agents, where the central role is played by transition metal complexes. The proper ligand design serves as a key factor to unlock the anticancer potential of a particular metal center. Following a recent trend, we have prepared unsymmetrical pincer ligands that combine benzothiazole and thiocarbamate donor groups. These compounds are shown to readily undergo direct cyclopalladation, affording the target S,C,N-type Pd(II) pincer complexes both in solution and in the absence of a solvent. The solid-phase strategy provided the complexes in an efficient and ecologically friendly manner. The resulting palladacycles are fully characterized using nuclear magnetic resonance (NMR) and infrared (IR) spectroscopy and, in one case, by single-crystal X-ray diffraction (XRD). The solvent-free reactions are additionally analyzed by powder XRD. The pincer complexes exhibit remarkable cytotoxicity against several solid and blood cancer cell lines, including human colorectal carcinoma (HCT116), breast cancer (MCF7), prostate adenocarcinoma (PC3), chronic myelogenous leukemia (K562), multiple plasmacytoma (AMO1), and acute lymphoblastic leukemia (H9), with the dimethylamino-substituted derivative being particularly effective. The latter also induced an appreciable level of apoptosis in both parental and doxorubicin-resistant cells K562 and K562/iS9, vindicating the high anticancer potential of this type of palladacycles.

KuINins as a New Class of HIV-1 Inhibitors That Block Post-Integration DNA Repair.

Integration of HIV-1 genomic cDNA results in the formation of single-strand breaks in cellular DNA, which must be repaired for efficient viral replication. Post-integration DNA repair mainly depends on the formation of the HIV-1 integrase complex with the Ku70 protein, which promotes DNA-PK assembly at sites of integration and its activation. Here, we have developed a first-class inhibitor of the integrase-Ku70 complex formation that inhibits HIV-1 replication in cell culture by acting at the stage of post-integration DNA repair. This inhibitor, named s17, does not affect the main cellular function of Ku70, namely its participation in the repair of double-strand DNA breaks through the non-homologous end-joining pathway. Using a molecular dynamics approach, we have constructed a model for the interaction of s17 with Ku70. According to this model, the interaction of two phenyl radicals of s17 with the L76 residue of Ku70 is important for this interaction. The requirement of two phenyl radicals in the structure of s17 for its inhibitory properties was confirmed using a set of s17 derivatives. We propose to stimulate compounds that inhibit post-integration repair by disrupting the integrase binding to Ku70 KuINins.

Reaction of Picolinamides with Ketones Producing a New Type of Heterocyclic Salts with an Imidazolidin-4-One Ring.

Reactions of picolinamides with 1,3-propanesultone in methanol followed by the treatment with ketones led to a series of previously unknown chemical transformations, yielding first pyridinium salts (2a-f), with a protonated endocyclic nitrogen atom, and then heterocyclic salts (3a-j) containing an imidazolidin-4-one ring. The structures of intermediate and final products were determined by IR and 1H, 13C NMR spectroscopy, and X-ray study. The effects of the ketone and alcohol structures on the product yield were studied by quantum-chemical calculations. The stability of salts 3a-j towards hydrolysis and alcoholysis makes them excellent candidates for the search for new types of biologically active compounds.

Inverse α-Effect as the Ariadne's Thread on the Way to Tricyclic Aminoperoxides: Avoiding Thermodynamic Traps in the Labyrinth of Possibilities.

Stable tricyclic aminoperoxides can be selectively assembled via a catalyst-free three-component condensation of ß,δ'-triketones, H2O2, and an NH-group source such as aqueous ammonia or ammonium salts. This procedure is scalable and can produce gram quantities of tricyclic heterocycles, containing peroxide, nitrogen, and oxygen cycles in one molecule. Amazingly, such complex tricyclic molecules are selectively formed despite the multitude of alternative reaction routes, via equilibration of peroxide, hemiaminal, monoperoxyacetal, and peroxyhemiaminal functionalities! The reaction is initiated by the "stereoelectronic frustration" of H2O2 and combines elements of thermodynamic and kinetic control with a variety of mono-, bi-, and tricyclic structures evolving under the conditions of thermodynamic control until they reach a kinetic wall created by the inverse α-effect, that is, the stereoelectronic penalty for the formation of peroxycarbenium ions and related transition states. Under these conditions, the reaction stops before reaching the most thermodynamically stable products at a stage where three different heterocycles are assembled and fused at the acyclic precursor frame.

Various Approaches to Studying the Phase Transition in an Octamethylcyclotetrasiloxane Crystal: From X-ray Structural Analysis to Metadynamics.

The structure, thermodynamic parameters, and the character of thermal motion in octamethylcyclotetrasiloxane (D4) were investigated using the combination of experimental (single-crystal X-ray diffraction, thermochemistry) and theoretical (density functional theory calculations, ab initio molecular dynamics and metadynamics) methods. Single crystals of D4 were grown in a glass capillary in situ and the structures of high- (238-270 K) and low-temperature (100-230 K) phases were studied in detail. In the temperature interval 230-238 K, a phase transition with rather low enthalpy (-1.04(7) kcal/mol) was detected. It was found that phase transition is accompanied by change of conformation of cyclosiloxane moiety from boat-saddle (cradle) to chair. According to PBE0/6-311G(d,p) calculation of isolated D4, such conformation changes are characterized by a low barrier (0.07 kcal/mol). The character of molecular thermal motion and the path of phase transition were established with combination of periodic DFT calculations, including molecular dynamics and metadynamics. The effect of crystal field led to an increase in the calculated phase transition barrier (4.27 kcal/mol from low- to high-temperature phase and 3.20 kcal/mol in opposite direction).

Non-Covalent Interactions in the Crystal Structures of Perbrominated Sulfonium Derivatives of the closo-Decaborate Anion.

A new series of compounds based on perbrominated disubstituted sulfonium derivatives of the closo-decaborate anion (n-Bu4N)[2-B10Br9SR2] (R = n-Pr, i-Pr, n-Bu, n-C8H17, n-C12H25, n-C18H37) was obtained, characterised by modern physicochemical methods of analysis. According to the results of an X-ray diffraction study, some of the anions and solvate molecules were disordered. The cations (n-Bu4N)+ and anions [2-B10Br9SR2]- were associated via C-H…Br and H…H contacts. In addition, Br…Br interactions between anions were revealed. The role of these contacts was analysed in terms of Hirshfeld surface analysis, QTAIM theory and the NCI method using quantum chemical calculations. An increase in the size of the alkyl R moiety led to significant strengthening of the total energy of H…H interactions. In the case of R = -n-C18H37, a parallel mutual orientation of alkyl moieties was established that was similar to the packing of salts of fatty acids. The nature of C-H…Br and Br…Br interionic interactions was found to be attractive, in contrast to the repulsive nature of intermolecular Br…Br interactions.

Pyridine Carboxamides Based on Sulfobetaines: Design, Reactivity, and Biological Activity.

The synthesis of the products of the 1,3-propanesultone ring opening during its interaction with amides of pyridinecarboxylic acids has been carried out. The dependence of the yield of the reaction products on the position (ortho-, meta-, para-) of the substituent in the heteroaromatic fragment and temperature condition was revealed. In contrast to the meta- and para-substituted substrates, the reaction involving ortho-derivatives at the boiling point of methanol unexpectedly led to the formation of a salt. On the basis of spectroscopic, X-Ray, and quantum-chemical calculation data, a model of the transition-state, as well as a mechanism for this alkylation reaction of pyridine carboxamides with sultone were proposed in order to explain the higher yields obtained with the nicotinamide and its N-methyl analog compared to ortho or meta parents. Based on the analysis of ESP maps, the positions of the binding sites of reagents with a potential complexing agent in space were determined. The in silico evaluation of possible biological activity showed that the synthetized compounds revealed some promising pharmacological effects and low acute toxicity.

A Novel Family of Cage-like (CuLi, CuNa, CuK)-phenylsilsesquioxane Complexes with 8-Hydroxyquinoline Ligands: Synthesis, Structure, and Catalytic Activity.

The first examples of metallasilsesquioxane complexes, including ligands of the 8-hydroxyquinoline family 1-9, were synthesized, and their structures were established by single crystal X-ray diffraction using synchrotron radiation. Compounds 1-9 tend to form a type of sandwich-like cage of Cu4M2 nuclearity (M = Li, Na, K). Each complex includes two cisoid pentameric silsesquioxane ligands and two 8-hydroxyquinoline ligands. The latter coordinates the copper ions and corresponding alkaline metal ions (via the deprotonated oxygen site). A characteristic (size) of the alkaline metal ion and a variation of characteristics of nitrogen ligands (8-hydroxyquinoline vs. 5-chloro-8-hydroxyquinoline vs. 5,7-dibromo-8-hydroxyquinoline vs. 5,7-diiodo-8-hydroxyquinoline) are highly influential for the formation of the supramolecular structure of the complexes 3a, 5, and 7-9. The Cu6Na2-based compound 2 exhibits high catalytic activity towards the oxidation of (i) hydrocarbons by H2O2 activated with HNO3, and (ii) alcohols by tert-butyl hydroperoxide. Studies of kinetics and their selectivity has led us to conclude that it is the hydroxyl radicals that play a crucial role in this process.

Hybrid Silsesquioxane/Benzoate Cu7-Complexes: Synthesis, Unique Cage Structure, and Catalytic Activity.

A series of phenylsilsesquioxane-benzoate heptacopper complexes 1-3 were synthesized and characterized by X-ray crystallography. Two parallel routes of toluene spontaneous oxidation (into benzyl alcohol and benzoate) assisted the formation of the cagelike structure 1. A unique multi-ligation of copper ions (from (i) silsesquioxane, (ii) benzoate, (iii) benzyl alcohol, (iv) pyridine, (v) dimethyl-formamide and (vi) water ligands) was found in 1. Directed self-assembly using benzoic acid as a reactant afforded complexes 2-3 with the same main structural features as for 1, namely heptanuclear core coordinated by (i) two distorted pentameric cyclic silsesquioxane and (ii) four benzoate ligands, but featuring other solvate surroundings. Complex 3 was evaluated as a catalyst for the oxidation of alkanes to alkyl hydroperoxides and alcohols to ketones with hydrogen peroxide and tert-butyl hydroperoxide, respectively, at 50 °C in acetonitrile. The maximum yield of cyclohexane oxidation products as high as 32% was attained. The oxidation reaction results in a mixture of cyclohexyl hydroperoxide, cyclohexanol, and cyclohexanone. Upon the addition of triphenylphosphine, the cyclohexyl hydroperoxide is completely converted to cyclohexanol. The specific regio- and chemoselectivity in the oxidation of n-heptane and methylcyclohexane, respectively, indicate the involvement of of hydroxyl radicals. Complex 3 exhibits a high activity in the oxidation of alcohols.

Marriage of Peroxides and Nitrogen Heterocycles: Selective Three-Component Assembly, Peroxide-Preserving Rearrangement, and Stereoelectronic Source of Unusual Stability of Bridged Azaozonides.

Stable bridged azaozonides can be selectively assembled via a catalyst-free three-component condensation of 1,5-diketones, hydrogen peroxide, and an NH-group source such as aqueous ammonia or ammonium salts. This procedure is scalable and can produce gram quantities of bicyclic stereochemically rich heterocycles. The new azaozonides are thermally stable and can be stored at room temperature for several months without decomposition and for at least 1 year at -10 °C. The chemical stability of azaozonides was explored for their subsequent selective transformations including the first example of an aminoperoxide rearrangement that preserves the peroxide group. The amino group in aminoperoxides has remarkably low nucleophilicity and does not participate in the usual amine alkylation and acylation reactions. These observations and the 15 pKa units decrease in basicity in comparison with a typical dialkyl amine are attributed to the strong hyperconjugative nN→σ*C-O interaction with the two antiperiplanar C-O bonds. Due to the weakness of the complementary nO→σ*C-N donation from the peroxide oxygens (a consequence of "inverse α-effect"), this interaction depletes electron density from the NH moiety, protects it from oxidation, and makes it similar in properties to an amide.

Synthesis of Perchlorinated Sulfonium Derivatives of closo-Decaborate Anion [2-B10Cl9SR2]- (R = i-C3H7, n-C3H7, n-C4H9, n-C8H17, n-C12H25, n-C18H37, CH2Ph, and cyclo-S(CH2)4).

A method for obtaining perchlorinated di-S,S-substituted derivatives of the closo-decaborate anion with various alkyl groups has been developed: [B10Cl9SR2]- (R= i-C3H7, n-C3H7, n-C4H9, n-C8H17, n-C12H25, n-C18H37, CH2Ph, and cyclo-S(CH2)4). The method is based on the preparation of the sulfonium-substituted anion [B10H9SR2]- by alkylation of the anion [B10H9SH]2- with bromoalkanes (i-C3H7Br, n-C3H7Br, n-C4H9Br, n-C8H17Br, n-C12H25Br, n-C18H37Br, PhCH2Br, and BrCH2(CH2)2CH2Br) followed by the cluster chlorination with sulfuryl chloride SO2Cl2 in acetonitrile. The process proceeds until the hydrogen atoms in the boron cluster are completely replaced with chlorine and completes within 60 h. It has been found that the melting point of salts ((C4H9)4N)[B10Cl9SR2] (R= i-C3H7, n-C3H7, n-C4H9, n-C8H17, n-C12H25, and n-C18H37) strongly depends on the length of the hydrocarbon chain of the substituent R.

Synthesis, Structure and Electrochemical Properties of Acetamide- and Caprolactam-Containing Silicon Catecholates.

Hexacoordinated heteroligand silicon catecholates, although being prospective as easily soluble compounds with high hydrolytic stability and diverse redox properties, have been insufficiently studied. The transesterification of 1-(trimethoxysilylmethyl)-2-oxohexahydroaze or N-methyl-N-(trimethoxysilylmethyl)acetamide by two equivalents of catechol derivatives in the presence of dicyclohexylamine afforded a series of target compounds in good yield. The complexes were characterized using elemental analysis, FTIR, 1H, 13C and 29Si NMR spectra, X-ray crystallography and cyclic voltammetry. X-ray diffraction confirmed that the silicon atom possesses the octahedral geometry of the SiCO5 polyhedron that remains unchanged in solution as it follows from 29Si NMR data. The compounds demonstrated up to three oxidation waves; and the reduction profile strongly depended on the nature of the substituents on a catecholate anion.

How to Build Rigid Oxygen-Rich Tricyclic Heterocycles from Triketones and Hydrogen Peroxide: Control of Dynamic Covalent Chemistry with Inverse α-Effect.

We describe an efficient one-pot procedure that "folds" acyclic triketones into structurally complex, pharmaceutically relevant tricyclic systems that combine high oxygen content with unusual stability. In particular, ß,γ'-triketones are converted into three-dimensional polycyclic peroxides in the presence of H2O2 under acid catalysis. These transformations are fueled by stereoelectronic frustration of H2O2, the parent peroxide, where the lone pairs of oxygen are not involved in strongly stabilizing orbital interactions. Computational analysis reveals how this frustration is relieved in the tricyclic peroxide products, where strongly stabilizing anomeric nO→σC-O* interactions are activated. The calculated potential energy surfaces for these transformations combine labile, dynamically formed cationic species with deeply stabilized intermediate structures that correspond to the introduction of one, two, or three peroxide moieties. Paradoxically, as the thermodynamic stability of the peroxide products increases along this reaction cascade, the kinetic barriers for their formation increase as well. This feature of the reaction potential energy surface, which allows separation of mono- and bis-peroxide tricyclic products, also explains why formation of the most stable tris-peroxide is the least kinetically viable and is not observed experimentally. Such unique behavior can be explained through the "inverse α-effect", a new stereoelectronic phenomenon with many conceptual implications for the development of organic functional group chemistry.