Upconversion Nanocrystal Doped Polymer Fiber Thermometer.

In recent years, lanthanide-doped nanothermometers have been mainly used in thin films or dispersed in organic solvents. However, both approaches have disadvantages such as the short interaction lengths of the active material with the pump beam or complicated handling, which can directly affect the achievable temperature resolution. We investigated the usability of a polymer fiber doped with upconversion nanocrystals as a thermometer. The fiber was excited with a wavelength stabilized diode laser at a wavelength of 976 nm. Emission spectra were recorded in a temperature range from 10 to 35 ∘C and the thermal emission changes were measured. Additionally, the pump power was varied to study the effect of self-induced heating on the thermometer specifications. Our fiber sensor shows a maximal thermal sensitivity of 1.45%/K and the minimal thermal resolution is below 20 mK. These results demonstrate that polymer fibers doped with nanocrystals constitute an attractive alternative to conventional fluorescence thermometers, as they add a long pump interaction length while also being insensitive to strong electrical fields or inert to bio-chemical environments.

Towards Highly Efficient Polymer Fiber Laser Sources for Integrated Photonic Sensors.

Lab-on-a-Chip (LoC) devices combining microfluidic analyte provision with integrated optical analysis are highly desirable for several applications in biological or medical sciences. While the microfluidic approach is already broadly addressed, some work needs to be done regarding the integrated optics, especially provision of highly integrable laser sources. Polymer optical fiber (POF) lasers represent an alignment-free, rugged, and flexible technology platform. Additionally, POFs are intrinsically compatible to polymer microfluidic devices. Home-made Rhodamine B (RB)-doped POFs were characterized with experimental and numerical parameter studies on their lasing potential. High output energies of 1.65 mJ, high slope efficiencies of 56 % , and 50 % -lifetimes of ≥900 k shots were extracted from RB:POFs. Furthermore, RB:POFs show broad spectral tunability over several tens of nanometers. A route to optimize polymer fiber lasers is revealed, providing functionality for a broad range of LoC devices. Spectral tunability, high efficiencies, and output energies enable a broad field of LoC applications.

Dipolar SAMs Reduce Charge Carrier Injection Barriers in n-Channel Organic Field Effect Transistors.

In this work we examine small conjugated molecules bearing a thiol headgroup as self assembled monolayers (SAM). Functional groups in the SAM-active molecule shift the work function of gold to n-channel semiconductor regimes and improve the wettability of the surface. We examine the effect of the presence of methylene linkers on the orientation of the molecule within the SAM. 3,4,5-Trimethoxythiophenol (TMP-SH) and 3,4,5-trimethoxybenzylthiol (TMP-CH2-SH) were first subjected to computational analysis, predicting work function shifts of -430 and -310 meV. Contact angle measurements show an increase in the wetting envelope compared to that of pristine gold. Infrared (IR) measurements show tilt angles of 22 and 63°, with the methylene-linked molecule (TMP-CH2-SH) attaining a flatter orientation. The actual work function shift as measured with photoemission spectroscopy (XPS/UPS) is even larger, -600 and -430 meV, respectively. The contact resistance between gold electrodes and poly[N,N'-bis(2-octyldodecyl)-naphthalene-1,4:5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene) (Polyera Aktive Ink, N2200) in n-type OFETs is demonstrated to decrease by 3 orders of magnitude due to the use of TMP-SH and TMP-CH2-SH. The effective mobility was enhanced by two orders of magnitude, significantly decreasing the contact resistance to match the mobilities reported for N2200 with optimized electrodes.

Unraveling the nanoscale morphologies of mesoporous perovskite solar cells and their correlation to device performance.

Hybrid solar cells based on organometal halide perovskite absorbers have recently emerged as promising class for cost- and energy-efficient photovoltaics. So far, unraveling the morphology of the different materials within the nanostructured absorber layer has not been accomplished. Here, we present the first visualization of the mesoporous absorber layer in a perovskite solar cell from analytical transmission electron microscopy studies. Material contrast is achieved by electron spectroscopic imaging. We found that infiltration of the hole transport material into the scaffold is low and inhomogeneous. Furthermore, our data suggest that the device performance is strongly affected by the morphology of the TiO2 scaffold with a fine grained structure being disadvantageous.

In-focus electrostatic Zach phase plate imaging for transmission electron microscopy with tunable phase contrast of frozen hydrated biological samples.

Transmission electron microscopy (TEM) images of beam sensitive weak-phase objects such as biological cryo samples usually show a very low signal-to-noise ratio. These samples have almost no amplitude contrast and instead structural information is mainly encoded in the phase contrast. To increase the sample contrast in the image, especially for low spatial frequencies, the use of phase plates for close to focus phase contrast enhancement in TEM has long been discussed. Electrostatic phase plates are favorable in particular, as their tunable potential will allow an optimal phase shift adjustment and higher resolution than film phase plates as they avoid additional scattering events in matter. Here we show the first realization of close to focus phase contrast images of actin filament cryo samples acquired using an electrostatic Zach phase plate. Both positive and negative phase contrast is shown, which is obtained by applying appropriate potentials to the phase plate. The dependence of phase contrast improvement on sample orientation with respect to the phase plate is demonstrated and single-sideband artifacts are discussed. Additionally, possibilities to reduce contamination and charging effects of the phase plate are shown.

Investigation of the molecular switching process between spin crossover states of triazole complexes as basis for optical sensing applications.

With the advent of the first laser sources and suitable detectors, optical sensor applications immediately also came into focus. During the last decades, a huge variety of optical sensor concepts were developed, yet the forecast for the future application potential appears even larger. In this context, the development of new sensor probes at different scales down to the atomic or molecular level open new avenues for research and development. We investigated an iron based triazole molecular spin-crossover complex changing its absorption characteristics significantly by varying environmental parameters such as humidity, temperature, magnetic or electric field, respectively, with respect to its suitability for a new class of versatile molecular sensor probes. Hereby, besides the investigation of synthesized pure bulk material using different analyzing methods, we also studied amorphous micro particles which were applied in or onto optical waveguide structures. We found that significant changes of the reflection spectra can also be obtained after combining the particles with different types of optical waveguides.The obtained results demonstrate the suitability of the material complex for a broad field of future sensor applications.

Piezoresistive Free-standing Microfiber Strain Sensor for High-resolution Battery Thickness Monitoring.

Highly sensitive microfiber strain sensors are promising for the detection of mechanical deformations in applications where limited space is available. In particular for in situ battery thickness monitoring where high resolution and low detection limit are key requirements. Herein, the realization of a highly sensitive strain sensor for in situ lithium-ion (Li-ion) battery thickness monitoring is presented. The compliant fiber-shaped sensor is fabricated by an upscalable wet-spinning method employing a composite of microspherical core-shell conductive particles embedded in an elastomer. The electrical resistance of the sensor changes under applied strain, exhibiting a high strain sensitivity and extremely low strain detection limit of 0.00005 with high durability of 10 000 cycles. To demonstrate the accuracy and ease of applicability of this sensor, the real-time thickness change of a Li-ion battery pouch cell is monitored during the charge and discharge cycles. This work introduces a promising approach with the least material complexity for soft microfiber strain gauges.

Design rules for charge-transport efficient host materials for phosphorescent organic light-emitting diodes.

The use of blue phosphorescent emitters in organic light-emitting diodes (OLEDs) imposes demanding requirements on a host material. Among these are large triplet energies, the alignment of levels with respect to the emitter, the ability to form and sustain amorphous order, material processability, and an adequate charge carrier mobility. A possible design strategy is to choose a π-conjugated core with a high triplet level and to fulfill the other requirements by using suitable substituents. Bulky substituents, however, induce large spatial separations between conjugated cores, can substantially reduce intermolecular electronic couplings, and decrease the charge mobility of the host. In this work we analyze charge transport in amorphous 2,8-bis(triphenylsilyl)dibenzofuran, an electron-transporting material synthesized to serve as a host in deep-blue OLEDs. We show that mesomeric effects delocalize the frontier orbitals over the substituents recovering strong electronic couplings and lowering reorganization energies, especially for electrons, while keeping energetic disorder small. Admittance spectroscopy measurements reveal that the material has indeed a high electron mobility and a small Poole-Frenkel slope, supporting our conclusions. By linking electronic structure, molecular packing, and mobility, we provide a pathway to the rational design of hosts with high charge mobilities.

Visualizing a homogeneous blend in bulk heterojunction polymer solar cells by analytical electron microscopy.

To increase efficiency of bulk heterojunctions for photovoltaic devices, the functional morphology of active layers has to be understood, requiring visualization and discrimination of materials with very similar characteristics. Here we combine high-resolution spectroscopic imaging using an analytical transmission electron microscope with nonlinear multivariate statistical analysis for classification of multispectral image data. We obtain a visual representation showing homogeneous phases of donor and acceptor, connected by a third composite phase, depending in its extent on the way the heterojunction is fabricated. For the first time we can correlate variations in nanoscale morphology determined by material contrast with measured solar cell efficiency. In particular we visualize a homogeneously blended phase, previously discussed to diminish charge separation in solar cell devices.

Synthesis of new pyrrole-pyridine-based ligands using an in situ Suzuki coupling method.

The compounds 6-(pyrrol-2-yl)-2,2'-bipyridine, 2-(pyrrol-2-yl)-1,10-phenanthroline and 2-(2-(N-methylbenz[d,e]imidazole)-6-(pyrrol-2-yl)-pyridine were synthesized by using an in situ generated boronic acid for the Suzuki coupling. Crystals of the products could be grown and exhibited interesting structures by X-ray analysis, one of them showing a chain-like network with the adjacent molecules linked to each other via intermolecular N-H(…)N hydrogen bonds.

Functionalization of an extended-gate field-effect transistor (EGFET) for bacteria detection.

Traditional sensing technologies have drawbacks as they are time-consuming, cost-intensive, and do not attain the required accuracy and reproducibility. Therefore, new methods of measurements are necessary to improve the detection of bacteria. Well-established electrical measurement methods can connect high sensitive sensing systems with biological requirements. One approach is to functionalize an extended-gate field-effect transistor's (EGFET) sensing area with modified porphyrins containing two different linkers. One linker connects the electrode surface with the porphyrin. The other linker bonds bacteria on the functional layer through a specific peptide chain. The negative charge on the surface of the cells regulates the surface potential which has an impact on the electrical behavior of the EGFET. The attendance of attached bacteria on the functionalized sensing area could successfully be detected.

A2BC-Type Porphyrin SAM on Gold Surface for Bacteria Detection Applications: Synthesis and Surface Functionalization.

Currently used elaborate technologies for the detection of bacteria can be improved in regard to their time consumption, labor intensity, accuracy and reproducibility. Well-known electrical measurement methods might connect highly sensitive sensing systems with biological requirements. The development of modified sensor surfaces with self-assembled monolayers (SAMs) from functionalized porphyrin for bacteria trapping can lead to a highly sensitive sensor for bacteria detection. Different A2BC-type porphyrin structures were synthesized and examined regarding their optical behavior. We achieved the synthesis of a porphyrin for SAM formation on a gold surface as electrode material. Two possible bio linkers were attached on the opposite meso-position of the porphyrin, which allows the porphyrin to react as a linker on the surface for bacteria trapping. Different porphyrin structures were attached to a gold surface, the SAM formation and the respective coverage was investigated.

External Control of GaN Band Bending Using Phosphonate Self-Assembled Monolayers.

We report on the optoelectronic properties of GaN(0001) and (11̅00) surfaces after their functionalization with phosphonic acid derivatives. To analyze the possible correlation between the acid's electronegativity and the GaN surface band bending, two types of phosphonic acids, n-octylphosphonic acid (OPA) and 1H,1H,2H,2H-perfluorooctanephosphonic acid (PFOPA), are grafted on oxidized GaN(0001) and GaN(11̅00) layers as well as on GaN nanowires. The resulting hybrid inorganic/organic heterostructures are investigated by X-ray photoemission and photoluminescence spectroscopy. The GaN work function is changed significantly by the grafting of phosphonic acids, evidencing the formation of dense self-assembled monolayers. Regardless of the GaN surface orientation, both types of phosphonic acids significantly impact the GaN surface band bending. A dependence on the acids' electronegativity is, however, only observed for the oxidized GaN(11̅00) surface, indicating a relatively low density of surface states and a favorable band alignment between the surface oxide and acids' electronic states. Regarding the optical properties, the covalent bonding of PFOPA and OPA on oxidized GaN layers and nanowires significantly affects their internal quantum efficiency, especially in the nanowire case due to the large surface-to-volume ratio. The variation in the internal quantum efficiency is related to the modification of both the internal electric fields and surface states. These results demonstrate the potential of phosphonate chemistry for the surface functionalization of GaN, which could be exploited for selective sensing applications.

Organic Dye-Doped PMMA Lasing.

Organic thin-film lasers gain interest as potential light sources for application in diverse fields. With the current development, they hold variety of benefits such as: low-cost, high-performance, and color-tunability. Meanwhile, the production is not complicated because both the resonator and the gain medium can be assembled by solution-processable organic materials. To our knowledge, information about using poly(methyl methacrylate) (PMMA) as a matrix for organic dye lasers was insubstantial. Herein, the feasibility of using organic dye-doped PMMA as an organic dye laser was tested. Six different sample designs were introduced to find out the best sample model. The most optimum result was displayed by the sample design, in which the gain medium was sandwiched between the substrate and the photoresist layer with grating structure. The impact of dye concentration and grating period on peak wavelength was also investigated, which resulted in a shift of 6 nm and 25 nm, respectively. Moreover, there were in total six various organic dyes that could function well with PMMA to collectively perform as 'organic dye lasers', and they emitted in the range of 572 nm to 609 nm. Besides, one of the samples was used as a sensor platform. For instance, it was used to detect the concentration of sugar solutions.

Efficient and long-time stable red iridium(III) complexes for organic light-emitting diodes based on quinoxaline ligands.

We report the design and characterization of three heteroleptic orange-red phosphorescent iridium(III) complexes bearing two 2-(4-fluorophenyl)-3-methyl-quinoxaline (fpmqx) cyclometalated ligands combined with three different ancillary ligands, triazolylpyridine (trz), picolinate (pic), and acetylacetonate (acac). All of these complexes emit an orange to red color in the spectral range of 605-628 nm in dichloromethane. Strong spin-orbit coupling of the iridium atom allows the formally forbidden mixing of singlet and triplet states. Because of the structureless phosphorescent line shapes and low Stokes shifts between triplet metal-to-ligand charge-transfer ((3)MLCT) absorption and phosphorescent emission, we propose that emission originates predominantly from the (3)MLCT state with a lesser admixture of totally ligand-based (3)(pi-pi*) states. The influence of 5d-electron densities of the iridium center on highest occupied molecular orbitals leads to high emission quantum yields in toluene (Phi(p) = 0.39-0.42) and to short triplet lifetimes. Cyclovoltammetry measurements show reversible oxidation peaks from 0.74 to 0.92 V and reversible reduction waves with potentials ranging from -1.58 to -2.05 V versus Cp(2)Fe/Cp(2)Fe(+). All complexes have been applied in simple test devices and also in stable, long-living devices to evaluate their electroluminescent device performances, for which we especially report the influence of the chosen ancillary ligands on emission colors, efficiencies, and device lifetimes. We obtained narrowband emission ranging from 613 to 630 nm with a full width at half-maximum of 64-71 nm, and a maximum in power efficiency of eta(p) = 14.6 lm/W at a current density of J = 0.01 mA/cm(2) for [(fpmqx)(2)Ir(pic)]. The operating lifetimes of [(fpmqx)(2)Ir(trz)] in both neat and mixed matrixes were longer than that of the established stable tris(1-phenylisoquinolinato)iridium(III) [Ir(piq)(3)]. From the lifetime measurements, it becomes clear that the stability is strongly correlated to the type of ancillary ligand. An extrapolated lifetime of 58 000 h with an initial brightness of 1000 cd/m(2), together with a very low voltage increase of 0.2 V over a time period of 1000 h (starting voltage of 4.1 V), was achieved. Such a high device lifetime is attributed to the chemical stability of all materials toward both charge carriers and excitons.

mer-Bis[2-(1,3-benzothiazol-2-yl)phenyl-κC,N][3-phenyl-5-(2-pyridyl)-1,2,4-triazol-1-ido-κN,N]iridium(III) deuterochloro-form 3.5-solvate.

In the title compound, [Ir(C(13)H(9)N(4))(C(13)H(8)NS)(2)]·3.5CDCl(3), the coordination at iridium is octa-hedral, but with narrow ligand bite angles. The bond lengths at iridium show the expected trans influence, with the Ir-N bonds trans to C being appreciably longer than those trans to N. The chelate rings are mutually perpendicular, the inter-planar angles between them all lying within 6° of 90°. All ligands are approximately planar; the maximum inter-planar angles within ligands are ca 10°. The three ordered deuterochloro-form mol-ecules are all involved in C⋯D-A contacts that can be inter-preted as hydrogen bonds of various types. The fourth deuterochloroform is disordered over an inversion centre.

mer-[3-Phenyl-5-(2-pyridyl-κN)-1,2,4-triazol-1-ido-κN]bis-(2-quinolylphenyl-κC,N)iridium(III) deuterochloro-form disolvate.

In the title compound, [Ir(C(13)H(9)N(4))(C(15)H(10)N)(2)]·2CDCl(3), the coordination at iridium is octa-hedral, but with narrow ligand bite angles ranging from 74.85 (8) to 83.99 (8)°. The bond lengths at iridium show the expected trans influence, with Ir-N trans to C being appreciably longer than trans to N. The chelate rings are mutually perpendicular to a reasonable approximation [interplanar angles ranging from 77.79 (6) to 83.93 (7)°]. All ligands are approximately planar; the maximum inter-planar angles within ligands are ca 12°. One CDCl(3) solvent molecule is severly disordered and was excluded from the refinement.

Optical and Electrical Measurements Reveal the Orientation Mechanism of Homoleptic Iridium-Carbene Complexes.

Understanding and controlling the driving forces for molecular alignment in optoelectronic thin-film devices is of crucial importance for improving their performance. In this context, the preferential orientation of organometallic iridium complexes is in the focus of research to benefit from their improved light-outcoupling efficiencies in organic light-emitting diodes (OLEDs). Although there has been great progress concerning the orientation behavior for heteroleptic Ir complexes, the mechanism behind the alignment of homoleptic complexes is still unclear yet. In this work, we present a sky-blue phosphorescent dye that shows variable alignment depending on systematic modifications of the ligands bound to the central iridium atom. From an optical study of the transition dipole moment orientation and the electrically accessible alignment of the permanent dipole moment, we conclude that the film morphology is related to both the aspect ratio of the dye and the local electrostatic interaction of the ligands with the film surface during growth. These results indicate a potential strategy to actively control the orientation of iridium-based emitters for the application in OLEDs.

Homogeneous Distribution of Polymerizable Coumarin Dyes for Active Few Mode POF.

For most kinds of active polymer optical fibers, a homogeneous distribution of dye molecules over the entire fiber length and cross section is required. In this study, chemical bonding of dyes to poly(methyl methacrylate) (PMMA) by copolymerization is achieved within the polymerization process instead of dissolving the dyes in the monomers. In combination with an improved fabrication mechanism, this leads to homogeneous dye distribution within the preforms. A method for proving the integration of the dyes into the polymer chains has been developed using high-performance liquid chromatography (HPLC) and size exclusion chromatography (SEC). Prestructured core-cladding preforms with dye-doped poly(cylohexyl methacrylate-co-methyl methacrylate)-core have been prepared with the Teflon string technique and were heat-drawn to few mode fibers.

Simplified methods for the functionalisation of 3-hexoxythiophenes at the 5-position and further reactions to alkynyl and vinyl derivatives.

Kinetically controlled lithiation of 3-hexoxythiophene in the 5-position allows the synthesis of interesting functionalised building blocks after reaction with N,N-dimethylformamide and iodine.