Solvent dependent iodide oxidation in metal-halide perovskite precursor solutions.

Solar cell absorbing layers made of metal-halide perovskites (MHPs) are usually deposited from solution phase precursors, which is one of the reasons why these materials received huge research attention in the last few years. A detailed knowledge of the solution chemistry is critical to understand the formation of MHP thin films and thus to control their optoelectronic properties and the reproducibility issues that usually affect their synthesis. In this regard, the concentration of triiodide, I3-, is one factor known to have an influence on regulating important aspects such as the particle size in the solution and the defect concentration in the film. In this study, we highlight an underestimated source of I3-, namely the iodide salt solutions ubiquitously employed in MHP synthetic routes, which not only lead to the formation of I3- but also detracts available I- for the MHP synthesis, thus establishing under-stoichiometric conditions. Particularly, we show how the oxidation of I- to I3- changes in time with both the iodide salt counter-cation (K+, CH3NH3+) and the used solvent, meaning that variable quantities of I3- are found depending on the synthesis conditions, with enhanced oxidation found in the γ-butyrolactone (GBL) solvent. Though these differences are generally small, we shed light on a hidden and ever-present reaction which is likely to be related to the overall processing quality of MHP thin films.

Xanthopsin-Like Systems via Site-Specific Click-Functionalization of a Retinoic Acid Binding Protein.

The use of light-responsive proteins to control both living or synthetic cells, is at the core of the expanding fields of optogenetics and synthetic biology. It is thus apparent that a richer reaction toolbox for the preparation of such systems is of fundamental importance. Here, we provide a proof-of-principle demonstration that Morita-Baylis-Hillman adducts can be employed to perform a facile site-specific, irreversible and diastereoselective click-functionalization of a lysine residue buried into a lipophilic binding pocket and yielding an unnatural chromophore with an extended π-system. In doing so we effectively open the path to the in vitro preparation of a library of synthetic proteins structurally reminiscent of xanthopsin eubacterial photoreceptors. We argue that such a library, made of variable unnatural chromophores inserted in an easy-to-mutate and crystallize retinoic acid transporter, significantly expand the scope of the recently introduced rhodopsin mimics as both optogenetic and "lab-on-a-molecule" tools.

Design, Synthesis and Characterization of a Visible-Light-Sensitive Molecular Switch and Its PEGylation Towards a Self-Assembling Molecule.

HBDI-like chromophores represent a novel set of biomimetic switches mimicking the fluorophore of the green fluorescent protein that are currently studied with the hope to expand the molecular switch/motor toolbox. However, until now members capable of absorbing visible light in their neutral (i. e. non-anionic) form have not been reported. In this contribution we report the preparation of an HBDI-like chromophore based on a 3-phenylbenzofulvene scaffold capable of absorbing blue light and photoisomerizing on the picosecond timescale. More specifically, we show that double-bond photoisomerization occurs in both the E-to-Z and Z-to-E directions and that these can be controlled by irradiating with blue and UV light, respectively. Finally, as a preliminary applicative result, we report the incorporation of the chromophore in an amphiphilic molecule and demonstrate the formation of a visible-light-sensitive nanoaggregated state in water.

Multilayer Gold-Silver Bimetallic Nanostructures to Enhance SERS Detection of Drugs.

Surface-enhanced Raman scattering (SERS) is a widely used technique for drug detection due to high sensitivity and molecular specificity. The applicability and selectivity of SERS in the detection of specific drug molecules can be improved by gathering information on the specific interactions occurring between the molecule and the metal surface. In this work, multilayer gold-silver bimetallic nanorods (Au@Ag@AuNRs) have been prepared and used as platforms for SERS detection of specific drugs (namely promethazine, piroxicam, furosemide and diclofenac). The analysis of SERS spectra provided accurate information on the molecular location upon binding and gave some insight into molecule-surface interactions and selectivity in drug detection through SERS.

A multi-spectroscopic approach to investigate the interactions between Gramicidin A and silver nanoparticles.

The comprehension and control of the interactions between nanoparticles and proteins at a molecular level are crucial to improve biomedical applications of nanomaterials and to develop nanosystems able to influence and regulate the conformational changes in proteins. In this work, we explore the interactions between Gramicidin A peptide (GramA) and dodecanethiol-stabilized small silver nanoparticles (D-AgNPs), paying particular attention to the effect on GramA conformation in POPC bilayers. D-AgNPs have been prepared to have dimensions (5 nm) and a hydrophobic nature compatible with the POPC lipid bilayer. Fluorescence, Raman and IR spectroscopies have been used to investigate both peptide conformation and its position inside the phospholipid bilayer. Results are discussed in terms of solvent exposure and conformation of GramA peptide.

Controlled assembly of metal colloids on dye-doped silica particles to tune the photophysical properties of organic molecules.

The use of plasmonic nanomaterials is a challenging strategy to control radiation and radiation-induced processes at a nanometric scale. The localized surface plasmons of metal nanoparticles have been shown to affect the efficiency of a variety of radiative and non-radiative processes occurring in organic molecules. In this contribution, we present an overview of the results obtained through an original approach based on the hierarchical assembly of plasmonic gold colloids on silica templates, covalently doped with organic dyes. The detailed morphological characterization demonstrates the disposition of gold colloids on silica achieved through the tight control of the synthetic conditions. The studies carried out while gradually increasing the concentration of gold nanoparticles allow the detailed investigation of the effects of the progressive addition of plasmonic particles on the photophysical behaviour of organic molecules. In particular, the fluorescence behaviour of three dyes with different spectral properties, namely fluorescein, rhodamine B and 9-aminoacridine, are investigated in the presence of increasing concentrations of gold nanoparticles. In order to fix the distance between the dye and the gold nanoparticles, the dyes are anchored to silica nanoparticles, and the metal colloids are chemically adsorbed on the silica surface. The steady state and time-resolved data are analysed to evaluate the impact of plasmonic nanoparticles on the radiative and non-radiative processes of the dyes; the data provide evidence that the modulation of the fluorescence intensity (enhancement or quenching) can be achieved by changing the concentration of gold colloids. The plasmonic nanostructures can be employed to favour one deactivation process over the others. For example, we demonstrate that the photoinduced formation of reactive oxygen species (ROS) can be enhanced upon the plasmonic engineering of a photosensitizing agent (Protoporphyrin IX, PpIX). The Vis-excitation of silica-PpIX samples in the presence of gold nanoparticles results in a faster and more efficient photoinduced formation of ROS species either in solution or in a hydrogel. The ROS efficiency data and the fluorescence behaviour of PpIX in the presence of gold colloids suggest that the enhancement of the excitation field occurs through a plasmonic effect. For the application of the assembled hybrid materials, further advantages come from the development of photosensitizer-containing hydrogel films that are able to efficiently produce ROS upon visible excitation. Our preliminary results are herein reported and discussed.

Photoactivation of Luminescent Centers in Single SiO2 Nanoparticles.

Photobleaching of fluorophores is one of the key problems in fluorescence microscopy. Overcoming the limitation of the maximum number of photons, which can be detected from a single emitter, would allow one to enhance the signal-to-noise ratio and thus the temporal and spatial resolution in fluorescence imaging. It would be a breakthrough for many applications of fluorescence spectroscopy, which are unachievable up to now. So far, the only approach for diminishing the effect of photobleaching has been to enhance the photostability of an emitter. Here, we present a fundamentally new solution for increasing the number of photons emitted by a fluorophore. We show that, by exposing a single SiO2 nanoparticle to UV illumination, one can create new luminescent centers within this particle. By analogy with nanodiamonds, SiO2 nanoparticles can possess luminescent defects in their regular SiO2 structure. However, due to the much weaker chemical bonds, it is possible to generate new defects in SiO2 nanostructures using UV light. This allows for the reactivation of the nanoparticle's fluorescence after its photobleaching.

Design, Synthesis, and Dynamics of a Green Fluorescent Protein Fluorophore Mimic with an Ultrafast Switching Function.

While rotary molecular switches based on neutral and cationic organic π-systems have been reported, structurally homologous anionic switches providing complementary properties have not been prepared so far. Here we report the design and preparation of a molecular switch mimicking the anionic p-HBDI chromophore of the green fluorescent protein. The investigation of the mechanism and dynamics of the E/Z switching function is carried out both computationally and experimentally. The data consistently support axial rotary motion occurring on a sub-picosecond time scale. Transient spectroscopy and trajectory simulations show that the nonadiabatic decay process occurs in the vicinity of a conical intersection (CInt) between a charge transfer state and a covalent/diradical state. Comparison of our anionic p-HBDI-like switch with the previously reported cationic N-alkyl indanylidene pyrrolinium switch mimicking visual pigments reveals that these similar systems translocate, upon vertical excitation, a similar net charge in the same axial direction.

Probing DNA-stabilized fluorescent silver nanocluster spectral heterogeneity by time-correlated single photon counting.

DNA-stabilized silver nanoclusters (DNA-AgNCs) are promising fluorophores whose photophysical properties and synthesis procedures have received increased attention in the literature. However, depending on the preparation conditions and the DNA sequence, the DNA-AgNC samples can host a range of different emitters, which can influence the reproducibility of the optical response and the evolution over time of the populations of these emitters. We have developed a simple method to characterize the spectral heterogeneity and time evolution of these emissive species at any given point in time after preparation, by plotting the average decay time as a function of emission wavelength. These so-called average decay time spectra were acquired for different excitation wavelengths of AgNCs stabilized by an oligonucleotide containing 24 cytosines (C24-AgNCs). The average decay time spectra allowed the comparison of sample preparation and the judgment of reproducibility. Therefore, we propose the use of the average decay time spectra as a robust and easy tool to characterize and compare different as-synthesized DNA-AgNC samples. The average decay time spectra can in general also be used to characterize the spectral heterogeneity of other fluorophores, such as luminescent colloidal nanoparticles, and to assess the reproducibility of a synthetic procedure containing an unknown distribution of emissive species.

A steady-state and time-resolved photophysical study of CdTe quantum dots in water.

The exciton generation and recombination dynamics in semiconductor nanocrystals are very sensitive to small variations in dimensions, shape and surface capping. In the present work CdTe quantum dots are synthesized in water using 3-mercaptopropionic acid and 1-thioglycerol as stabilizers. Nanocrystals with an average dimension of 4.0 ± 1.0 and 3.7 ± 0.9 nm were obtained, when 3-mercaptopropionic acid or 1-thioglycerol, respectively, was used as a capping agent. The steady-state characterization shows that the two types of colloids have different luminescence behavior. In order to investigate the electronic structure and the dynamics of the exciton state, a combined study in the time domain has been carried out by using fluorescence time-correlated single photon counting and femtosecond transient absorption techniques. The electron-hole radiative recombination follows the non-exponential decay law for both colloids, which results in different average decay time values (of the order of tens of nanoseconds) for the two samples. The data demonstrate that the process is slower for 1-thioglycerol-stabilized colloids. The ultrafast transient absorption measurements are performed at two different excitation wavelengths (at the band gap and at higher energies). The spectra are dominated in both types of samples by the negative band-gap bleaching signals although transient positive absorption bands due to the electrons in the conduction band are observable. The analysis of the signals is affected by the different interactions with the defect states, due to ligand capping capacities. In particular, the data indicate that in 1-thioglycerol-stabilized colloids the non-radiative recombination processes are kinetically more competitive than the radiative recombination. Therefore the comparison of the data obtained from the two samples is interpreted in terms of the effects of the capping agents on the electronic relaxation of the colloids.

Photoluminescence of a single quantum emitter in a strongly inhomogeneous chemical environment.

We present the results of a comprehensive photoluminescence study of defect centres in single SiO2 nanoparticles. We show that the photo-physical properties of the luminescent centres strongly resemble those of single dye molecules. However, these properties exhibit a large variability from particle to particle due to the different local chemical environment around each centre of each particle. This variability provides new insight into the complex photo-physics of single quantum emitters embedded into a random chemical environment. Moreover, a better understanding of the fundamental mechanism of the photoluminescence of defect centres in SiO2 structure is paramount for their application as white-light sources, non-toxic labels for bio-imaging, or for combining them with metallic and semiconductor nanostructures.

Promethazine-montmorillonite inclusion complex to enhance drug photostability.

The capability of montmorillonite as a matrix (MONT) to improve the photostability of photolabile drugs has been recently reported. Herein promethazine (PRO), which was chosen as a model drug because of its photodegradation mechanism, was intercalated into this inorganic matrix, and the effects on drug photoprotection were evaluated as well. The hybrid material (MONT-PRO) was successfully prepared with high drug loading and then was characterized by X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), and FTIR spectroscopy. The spectrophotometric measurements as a function of light exposure time showed that PRO intercalation into montmorillonite markedly improved the drug photostability because a 5-fold-slower degradation rate was determined compared to that measured for PRO in homogeneous solutions; nanosecond transient absorption measurements highlighted that the interaction with the inorganic matrix made negligible the photoionization process of the drug, and its efficiency in producing singlet oxygen was strongly reduced. The MONT-PRO intercalation compound could be easily formulated in gel or ointment media without losing its photostability.

Effect of metal nanoparticles on the photophysical behaviour of dye-silica conjugates.

Fluorescein has been covalently entrapped into 120 nm silica beads in order to measure the effect of plasmonic gold nanoparticles, having 25 nm diameter, on the radiative processes of the dye. Two distinct regimes of enhancement and quenching of fluorescein emission have been observed, depending on the concentration of the metal adsorbed on the silica surface and the overlap between the SPR and the fluorescein spectra. At particle concentrations below 5.0 × 10(13) nanoparticles mL(-1), the fluorescence of the dye is enhanced, and this effect is more pronounced when the excitation wavelength matches the maximum of the extinction spectrum of the gold nanoparticles. When the concentration of gold is further increased, quenching occurs and it has been attributed to the SPR shift following the aggregation of the gold colloids on the silica surface. The invariance of the fluorescence lifetimes during the whole process indicates that the mechanism of fluorophore-nanoparticle interaction is mainly based on changes in the absorption efficiency of the organic dye.

Harnessing the electronic structure of active metals to lower the overpotential of the electrocatalytic oxygen evolution reaction.

Despite substantial advancements in the field of the electrocatalytic oxygen evolution reaction (OER), the efficiency of earth-abundant electrocatalysts remains far from ideal. The difficulty stems from the complex nature of the catalytic system, which limits our fundamental understanding of the process and thus the possibility of a rational improvement of performance. Herein, we shed light on the role played by the tunable 3d configuration of the metal centers in determining the OER catalytic activity by combining electrochemical and spectroscopic measurements with an experimentally validated computational protocol. One-dimensional coordination polymers based on Fe, Co and Ni held together by an oxonato linker were selected as a case study because of their well-defined electronic and geometric structure in the active site, which can be straightforwardly correlated with their catalytic activity. Novel heterobimetallic coordination polymers were also considered, in order to shed light on the cooperativity effects of different metals. Our results demonstrate the fundamental importance of electronic structure effects such as metal spin and oxidation state evolutions along the reaction profile to modulate ligand binding energies and increase catalyst efficiency. We demonstrated that these effects could in principle be exploited to reduce the overpotential of the electrocatalytic OER below its theoretical limit, and we provide basic principles for the development of coordination polymers with a tailored electronic structure and activity.

Driving the interactions between organic nanoparticles and phospolipidic membranes by an easy treatment of the surface stabilizer.

Polymer-stabilized perylene nanoparticles were prepared through a solvent exchange method. The formation of the nanostructures in aqueous solution was confirmed by the appearance of a red-shifted emission attributable to the formation of excimer-like aggregates. The behavior of organic nanostructures in the presence of lipid vesicles was investigated through steady-state and time-resolved fluorescence measurements. When no further surface treatment is applied to the nanoparticles, changes in the decay times and emission spectra demonstrate that inside the lipid bilayers the nanoparticles redissolve into the monomeric form with a rate and efficiency determined by the working temperature (above and below the transition temperature Tm of the phospholipid). On the other hand, when the stabilized shell is UV-cured to induce photo-cross-linking of the polymeric chains, the nanoparticle stability increases and their redissolution in the membrane is prevented. Confocal fluorescence images support the data obtained in bulk. The results indicate that the prepared nanostructures could be successfully used either as nanometric carriers for the delivery of poor water-soluble lipophilic compounds or as imaging tools depending on the rigidity/cross-linking degree of their polymeric stabilizer shell.

Coupling physical chemical techniques with hydrotalcite-like compounds to exploit their structural features and new multifunctional hybrids with luminescent properties.

Hydrotalcite-like compounds (HTlc), belonging to the large class of Layered Double Hydroxides (LDH), have excited wide interest owing to the incredible number of their potential and achieved applications in physical, chemical and bio-chemical fields. This perspective review deals with recent advances in the application of physical-chemical techniques for the study of HTlc structure and for the design and synthesis, using intercalation chemistry routes, of new hybrid materials. Firstly, a rapid survey on the most common synthetic strategies for the attainment of HTlc with different crystallinity degree and crystal size and for their modification to obtain hybrids has been made, and the use of coupled techniques (XRPD, luminescence, Solid State MAS NMR and Molecular Dynamics) to gain structural information is reported. Then, the design, synthesis and photophysical characterization of azoic dyes-intercalated and co-intercalated HTlc hybrid materials are described. Hybrids constituted of ZnAl-HTlc, co-intercalated with stearate anions and methyl orange or methyl yellow dyes, have been used as nanofillers of hydrophobic polymers. The polymeric nano-composites obtained have been characterized by means of XRPD patterns, Thermo-Gravimetric Analysis and Confocal Fluorescence Microscopy. This latter technique has been found to be an excellent, complementary and non-invasive tool to probe the dispersion degree of the fluorescent fillers into the polymeric matrices and their stability in the compounding process. Finally, the synthesis and spectroscopic characterization of nanoparticle (NP) decorated HTlc for advanced antimicrobial and photo-catalytic applications are also reported. The review terminates with a concluding short note and future trends.

Daytime Radiative Cooling: A Perspective toward Urban Heat Island Mitigation.

Traditional cooling and heating systems in residential buildings account for more than 15% of global electricity consumption and 10% of global emissions of greenhouse gases. Daytime radiative cooling (DRC) is an emerging passive cooling technology that has garnered significant interest in recent years due to its high cooling capability. It is expected to play a pivotal role in improving indoor and outdoor urban environments by mitigating surface and air temperatures while decreasing relevant energy demand. Yet, DRC is in its infancy, and thus several challenges need to be addressed to establish its efficient wide-scale application into the built environment. In this Perspective, we critically discuss the strategies and progress in materials development to achieve DRC and highlight the challenges and future paths to pave the way for real-life applications. Advances in nanofabrication in combination with the establishment of uniform experimental protocols, both in the laboratory/field and through simulations, are expected to drive economic increases in DRC.

Effect of plasmonic excitation on mature insulin amyloid fibrils.

Interactions between amyloid protein structures and nanomaterials have been extensively studied to develop effective inhibitors of amyloid aggregation. Limited investigations are reported on the impact of nanoparticles on mature fibrils. In this work, gold nanoparticles are used as photothermal agents to alter insulin fibrils. To this end, gold colloids bearing a negatively charged capping shell, with an average diameter of 14 nm and a plasmon resonance maximum at 520 nm are synthesized. The effects on mature insulin fibril morphology and structure upon plasmonic excitation of the nanoparticles-fibril samples have been monitored by spectroscopic and microscopic methods. The obtained data indicate that an effective destruction of the amyloid aggregates occur upon irradiation of the plasmonic nanoparticles, allowing the development of emerging strategies to alter the structure of amyloid fibrils.

Antimicrobial Oleogel Containing Sustainably Prepared Silver-Based Nanomaterials for Topical Application.

Oleogels containing silica-silver-based nanomaterials were prepared to be used as potential antimicrobial treatment for preventing and curing skin infections. Fumed silica was used as a bifunctional excipient able to offer support to silver-based nanoparticle growth and act as a gelling agent for oleogel formulation. First, silica-silver composites were prepared following a sustainable method by contact of fumed silica and silver nitrate in the presence of ethanol and successive UV irradiation. The composites were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), ATR FT-IR spectroscopy and UV-Vis spectrophotometry. The presence of 8-20 nm spherical nanoparticles, in addition to the silica aggregates and AgNO3 crystals, was detected. The composites showed good antimicrobial activity against the Gram-negative Pseudomonas aeruginosa and the Gram-positive bacteria Staphylococcus aureus and Staphylococcus epidermidis. Thus, they were formulated in an oleogel, obtained using fumed silica as a gelling agent. For comparison, oleogels containing AgNO3 were prepared according to two different formulative techniques. The silica-silver-based oleogels showed good antimicrobial activity and did not show cytotoxic effects for fibroblasts and keratinocytes.