RESUMO
Due to the increasing interest in emerging applications of graphene or other 2D material-based devices in photonics, a powerful, fast and accurate tool for the analysis of such structures is really in need. In this paper, the semi-analytical method of lines (MoL) is generalized for the diffraction analysis of tunable graphene-based plasmonic devices possessing three dimensional periodicity. We employ Floquet's theorem to handle analytically propagation of waves in the periodicity of the graphene-dielectric arrays in the direction of the layers stacking. This makes the method very effective in terms of computational time and memory consumption. To validate its efficiency and accuracy, the method is applied to plasmonic devices formed by alternating patterned graphene sheets and dielectric layers. Direct comparison with results available in literature and those obtained by a commercial software exhibits their full consistency.
RESUMO
We propose and study a microstructure based on a dielectric cuboid placed on a thin metal film that can act as an efficient plasmonic lens allowing the focusing of surface plasmons at the subwavelength scale. Using numerical simulations of surface plasmon polariton (SPP) field intensity distributions, we observe high-intensity subwavelength spots and formation of the plasmonic nanojet (PJ) at the telecommunication wavelength of 1530 nm. The fabricated microstructure was characterized using amplitude and phase-resolved scattering-type scanning near-field optical microscopy. We show the first experimental observation of the PJ effect for the SPP waves. Such a novel, to the best of our knowledge, and simple platform can provide new pathways for plasmonics, high-resolution imaging, and biophotonics, as well as optical data storage.
RESUMO
This publisher's note contains corrections to Opt. Lett.45, 3244 (2020)OPLEDP0146-959210.1364/OL.391861.
RESUMO
We present numerical studies of two photonic crystal membrane microcavities, a short line-defect cavity with a relatively low quality (Q) factor and a longer cavity with a high Q. We use five state-of-the-art numerical simulation techniques to compute the cavity Q factor and the resonance wavelength λ for the fundamental cavity mode in both structures. For each method, the relevant computational parameters are systematically varied to estimate the computational uncertainty. We show that some methods are more suitable than others for treating these challenging geometries.
RESUMO
The photonic spin Hall effect in transmission is a transverse beam shift of the out-coming beam depending on polarization of the incoming beam. The effect can be significantly enhanced by materials with high anisotropy. We report, to the best of our knowledge, the first experimental demonstration of the photonic spin Hall effect in a multilayer hyperbolic metamaterial at visible wavelengths (wavelengths of 520 and 633 nm). The metamaterial is composed of alternating layers of gold and alumina with deeply subwavelength thicknesses, exhibiting extremely large anisotropy. The angle-resolved polarimetric measurements showed the shift of 165 µm for the metamaterial of 176 nm in thickness. Additionally, the transverse beam shift is extremely sensitive to the variations of the incident angle changing theoretically by 270 µm with 1 milli-radian (0.057°). These features can lead to minituarized spin Hall switches and filters with high angular resolution.
RESUMO
Anapole states associated with the resonant suppression of electric-dipole scattering exhibit minimized extinction and maximized storage of electromagnetic energy inside a particle. Using numerical simulations, optical extinction spectroscopy, and amplitude-phase near-field mapping of silicon dielectric disks, we demonstrate high-order anapole states in the near-infrared wavelength range (900-1700 nm). We develop the procedure for unambiguously identifying anapole states by monitoring the normal component of the electric near-field and experimentally detect the first two anapole states as verified by far-field extinction spectroscopy and confirmed with the numerical simulations. We demonstrate that higher-order anapole states possess stronger energy concentration and narrower resonances, a remarkable feature that is advantageous for their applications in metasurfaces and nanophotonics components, such as nonlinear higher-harmonic generators and nanoscale lasers.
RESUMO
Optical and acoustic tractor beams are currently the focus of intense research due to their counterintuitive property of exerting a pulling force on small scattering objects. In this Letter we propose a matter-wave tractor beam and utilize the de Broglie waves of nonrelativistic matter particles in analogy to "classical" tractor beams. We reveal the presence of the quantum-mechanical pulling force for the variety of quantum mechanical potentials observing the resonant enhancement of the pulling effect under the conditions of the suppressed scattering known as the Ramsauer-Townsend effect. We also derive the sufficient conditions on the scattering potential for the emergence of the pulling force and show that, in particular, a Coulomb scatterer is always shoved, while a Yukawa (screened Coulomb) scatterer can be drawn. Pulling forces in optics, acoustics, quantum mechanics, and classical mechanics are compared, and the matter-wave pulling force is found to have exclusive properties of dragging slow particles in short-range potentials. We envisage that the use of tractor beams could lead to the unprecedented precision in manipulation with atomic-scale quantum objects.
RESUMO
Propagation of bound plasmon-polariton modes along 30-nm-thin gold strips on a silica substrate at the free-space wavelength of 1500 nm is investigated both theoretically and experimentally when decreasing the strip width from 1500 nm down to the aspect-ratio limited width of 30 nm, which ensures deep subwavelength mode confinement. The main mode characteristics (effective mode index, propagation length, and mode profile) are determined from the experimental amplitude- and phase-resolved near-field images for various strip widths (from 30 to 1500 nm), and compared to numerical simulations. The mode supported by the narrowest strip is found to be laterally confined within ~ 100 nm at the air side, indicating that the realistic limit for radiation nanofocusing in air using tapered metal strips is ~ λ/15.
RESUMO
Strongly confined surface plasmon-polariton modes can be used for efficiently delivering the electromagnetic energy to nanosized volumes by reducing the cross sections of propagating modes far beyond the diffraction limit, that is, by nanofocusing. This process results in significant local-field enhancement that can advantageously be exploited in modern optical nanotechnologies, including signal processing, biochemical sensing, imaging, and spectroscopy. Here, we propose, analyze, and experimentally demonstrate on-chip nanofocusing followed by impedance-matched nanowire antenna excitation in the end-fire geometry at telecom wavelengths. Numerical and experimental evidence of the efficient excitation of dipole and quadrupole (dark) antenna modes are provided, revealing underlying physical mechanisms and analogies with the operation of plane-wave Fabry-Pérot interferometers. The unique combination of efficient nanofocusing and nanoantenna resonant excitation realized in our experiments offers a major boost to the field intensity enhancement up to â¼12000, with the enhanced field being evenly distributed over the gap volume of 30 × 30 × 10 nm(3), and promises thereby a variety of useful on-chip functionalities within sensing, nonlinear spectroscopy and signal processing.
RESUMO
We propose a device for subwavelength optical imaging based on a metal-dielectric multilayer hyperlens designed in such a way that only large-wavevector (evanescent) waves are transmitted while all propagating (small-wavevector) waves from the object area are blocked by the hyper-lens. We numerically demonstrate that as the result of such filtering, the image plane only contains scattered light from subwavelength features of the objects and is completely free from background illumination. Similar in spirit to conventional dark-field microscopy, the proposed dark-field hyperlens is shown to enhance the subwavelength image contrast by more than two orders of magnitude. These findings are essential for optical imaging of weakly scattering subwavelength objects, such as real-time dynamic nanoscopy of label-free biological objects.
RESUMO
We report the first experimental demonstration of anomalous breakdown of the effective medium approximation in all-dielectric deeply subwavelength thickness (dâ¼λ/160-λ/30) multilayers, as recently predicted theoretically [H. H. Sheinfux et al., Phys. Rev. Lett. 113, 243901 (2014)]. Multilayer stacks are composed of alternating alumina and titania layers fabricated using atomic layer deposition. For light incident on such multilayers at angles near the total internal reflection, we observe pronounced differences in the reflectance spectra for structures with 10- vs 20-nm thick layers, as well as for structures with different layers ordering, contrary to the predictions of the effective medium approximation. The reflectance difference can reach values up to 0.5, owing to the chosen geometrical configuration with an additional resonator layer employed for the enhancement of the effect. Our results are important for the development of new high-precision multilayer ellipsometry methods and schemes, as well as in a broad range of sensing applications.
RESUMO
We present a comprehensive analysis of the applicability of the effective medium approximation to deeply subwavelength (period ≤λ/50 all-dielectric multilayer structures. We demonstrate that even though the dispersion relations for such multilayers differ from the effective medium prediction only slightly, there can be regimes when an actual multilayer stack exhibits significantly different properties compared to its homogenized model. In particular, reflection near the critical angle is shown to strongly depend on even very small period variations, as well as on the choice of the multilayer termination. We identify the geometries for which the influence of the subwavelength features is maximized and demonstrate that the difference between the reflectance from the actual multilayer and the effective medium prediction can be as great as 0.98. The results of this analysis can be useful for high-precision multilayer ellipsometry and in sensing applications.
RESUMO
We demonstrate the use of amplitude- and phase-resolved near-field mapping for direct characterization of plasmonic slot waveguide mode propagation and excitation with nanocouplers in the telecom wavelength range. We measure mode's propagation length, effective index and field distribution and directly evaluate the relative coupling efficiencies for various couplers configurations. We report 26- and 15-fold improvements in the coupling efficiency with two serially connected dipole and modified bow-tie antennas, respectively, as compared to that of the short-circuited waveguide termination.
RESUMO
We propose new designs of plasmonic modulators, which can be used for dynamic signal switching in photonic integrated circuits. We study performance of a plasmonic waveguide modulator with bismuth ferrite as a tunable material. The bismuth ferrite core is sandwiched between metal plates (metal-insulator-metal configuration), which also serve as electrodes. The core changes its refractive index by means of partial in-plane to out-of-plane reorientation of ferroelectric domains in bismuth ferrite under applied voltage. As a result, guided modes change their propagation constant and absorption coefficient, allowing light modulation in both phase and amplitude control schemes. Due to high field confinement between the metal layers, existence of mode cut-offs for certain values of the core thickness, and near-zero material losses in bismuth ferrite, efficient modulation performance is achieved. For the phase control scheme, the π phase shift is provided by a 0.8-µm long device with propagation losses 0.29 dB/µm. For the amplitude control scheme, up to 38 dB/µm extinction ratio with 1.2 dB/µm propagation loss is predicted.
Assuntos
Bismuto/química , Compostos Férricos/química , Fenômenos Ópticos , Absorção de Radiação , Dispositivos Ópticos , Ressonância de Plasmônio de SuperfícieRESUMO
We numerically investigate the influence of roughness in layer thicknesses on the properties of hyperbolic metamaterials (HMMs). We show that random spatial variation of dielectric and metal layer thicknesses, similar to what occurs during actual structure fabrication, leads to dramatic absorption increase compared to an ideal, smooth-layer HMM; the absorption increases more strongly when roughness is induced throughout the HMM rather than in its surface layer only. Hence, we have found that moderate surface roughness does not deteriorate the HMM functionality, at least in absorption-related applications, thus eliminating the challenge of ultrasmooth metal layer fabrication. More severe roughness can also prove useful in the design of inexpensive HMM-based broadband absorbers.
RESUMO
In this paper we present the efficient design of functional thin-film metamaterial devices with the effective surface conductivity approach. As an example, we demonstrate a graphene based perfect absorber. After formulating the requirements to the perfect absorber in terms of surface conductivity we investigate the properties of graphene wire medium and graphene fishnet metamaterials and demonstrate both narrowband and broadband tunable absorbers.
Assuntos
Grafite/química , Manufaturas , Espalhamento de Radiação , Radiação Terahertz , Absorção , Condutividade Elétrica , Teste de Materiais , Propriedades de SuperfícieRESUMO
We propose several planar layouts of ultra-compact plasmonic modulators that utilize alternative plasmonic materials such as transparent conducting oxides and titanium nitride. The modulation is achieved by tuning the carrier concentration in a transparent conducting oxide layer into and out of the plasmon resonance with an applied electric field. The resonance significantly increases the absorption coefficient of the modulator, which enables larger modulation depth. We show that an extinction ratio of 46 dB/µm can be achieved, allowing for a 3-dB modulation depth in much less than one micron at the telecommunication wavelength. Our multilayer structures can be integrated with existing plasmonic and photonic waveguides as well as novel semiconductor-based hybrid photonic/electronic circuits.
RESUMO
In this article, we propose a simple scheme to make a metallic film on a semi-infinite substrate optically transparent, thus obtaining a completely transparent electrode in a desired frequency range. By placing a composite layer consisting of dielectric and metallic stripes on top of the metallic one, we found that the back-scattering from the metallic film can be almost perfectly canceled by the composite layer under certain conditions, leading to transparency of the whole structure. We performed proof-of-concept experiments in the terahertz domain to verify our theoretical predictions, using carefully designed metamaterials to mimic plasmonic metals in optical regime. Experiments are in excellent agreement with full-wave simulations.
Assuntos
Eletrodos , Modelos Teóricos , Simulação por Computador , Desenho Assistido por Computador , Desenho de Equipamento , Análise de Falha de Equipamento , Luz , Refratometria , Espalhamento de Radiação , Radiação TerahertzRESUMO
For decades, silicon has been the material of choice for mass fabrication of electronics. This is in contrast to photonics, where passive optical components in silicon have only recently been realized. The slow progress within silicon optoelectronics, where electronic and optical functionalities can be integrated into monolithic components based on the versatile silicon platform, is due to the limited active optical properties of silicon. Recently, however, a continuous-wave Raman silicon laser was demonstrated; if an effective modulator could also be realized in silicon, data processing and transmission could potentially be performed by all-silicon electronic and optical components. Here we have discovered that a significant linear electro-optic effect is induced in silicon by breaking the crystal symmetry. The symmetry is broken by depositing a straining layer on top of a silicon waveguide, and the induced nonlinear coefficient, chi(2) approximately 15 pm V(-1), makes it possible to realize a silicon electro-optic modulator. The strain-induced linear electro-optic effect may be used to remove a bottleneck in modern computers by replacing the electronic bus with a much faster optical alternative.
RESUMO
Near-zero index (NZI) materials, i.e., materials having a phase refractive index close to zero, are known to enhance or inhibit light-matter interactions. Most theoretical derivations of fundamental radiative processes rely on energetic considerations and detailed balance equations, but not on momentum considerations. Because momentum exchange should also be incorporated into theoretical models, we investigate momentum inside the three categories of NZI materials, i.e., inside epsilon-and-mu-near-zero (EMNZ), epsilon-near-zero (ENZ) and mu-near-zero (MNZ) materials. In the context of Abraham-Minkowski debate in dispersive materials, we show that Minkowski-canonical momentum of light is zero inside all categories of NZI materials while Abraham-kinetic momentum of light is zero in ENZ and MNZ materials but nonzero inside EMNZ materials. We theoretically demonstrate that momentum recoil, transfer momentum from the field to the atom and Doppler shift are inhibited in NZI materials. Fundamental radiative processes inhibition is also explained due to those momentum considerations inside three-dimensional NZI materials. Absence of diffraction pattern in slits experiments is seen as a consequence of zero Minkowski momentum. Lastly, consequence on Heisenberg inequality, microscopy applications and on the canonical momentum as generator of translations are discussed. Those findings are appealing for a better understanding of fundamental light-matter interactions at the nanoscale as well as for lasing applications.