RESUMO
Moiré superlattices have emerged as a new platform for studying strongly correlated quantum phenomena, but these systems have been largely limited to van der Waals layer two-dimensional materials. Here we introduce moiré superlattices leveraging ultrathin, ligand-free halide perovskites, facilitated by ionic interactions. Square moiré superlattices with varying periodic lengths are clearly visualized through high-resolution transmission electron microscopy. Twist-angle-dependent transient photoluminescence microscopy and electrical characterizations indicate the emergence of localized bright excitons and trapped charge carriers near a twist angle of ~10°. The localized excitons are accompanied by enhanced exciton emission, attributed to an increased oscillator strength by a theoretically predicted flat band. This research showcases the promise of two-dimensional perovskites as unique room-temperature moiré materials.
RESUMO
Molecular chirality is represented as broken mirror symmetry in the structural orientation of constituent atoms and plays a pivotal role at every scale of nature. Since the discovery of the chiroptic property of chiral molecules, the characterization of molecular chirality is important in the fields of biology, physics, and chemistry. Over the centuries, the field of optical chiral sensing was based on chiral light-matter interactions between chiral molecules and polarized light. Starting from simple optics-based sensing, the utilization of plasmonic materials that could control local chiral light-matter interactions by squeezing light into molecules successfully facilitated chiral sensing into noninvasive, ultrasensitive, and accurate detection. In this Review, the importance of plasmonic materials and their engineering in chiral sensing are discussed based on the principle of chiral light-matter interactions and the theory of optical chirality and chiral perturbation; thus, this Review can serve as a milestone for the proper design and utilization of plasmonic nanostructures for improved chiral sensing.
RESUMO
Two-dimensional (2D) metal organic chalcogenides (MOCs) such as silver phenylselenolate (AgSePh) have emerged as a new class of 2D materials due to their unique optical properties. However, these materials typically exhibit large band gaps, and their elemental and structural versatility remain significantly limited. In this work, we synthesize a new family of 2D lead organic chalcogenide (LOC) materials with excellent structural and dimensionality tunability by designing the bonding ability of the organic molecules and the stereochemical activity of the Pb lone pair. The introduction of electron-donating substituents on the benzenethiol ligands results in a series of LOCs that transition from 1D to 2D, featuring reduced band gaps (down to 1.7 eV), broadband emission, and strong electron-phonon coupling. We demonstrated a prototypical single crystal photodetector with 2D LOC that showed the dimensionality engineering on the transport property of LOC semiconductors. This study paves the way for further development of the synthesis and optical properties of novel organic-inorganic hybrid 2D materials.
RESUMO
The water oxidation reaction, the most important reaction for hydrogen production and other sustainable chemistry, is efficiently catalyzed by the Mn4CaO5 cluster in biological photosystem II. However, synthetic Mn-based heterogeneous electrocatalysts exhibit inferior catalytic activity at neutral pH under mild conditions. Symmetry-broken Mn atoms and their cooperative mechanism through efficient oxidative charge accumulation in biological clusters are important lessons but synthesis strategies for heterogeneous electrocatalysts have not been successfully developed. Here, we report a crystallographically distorted Mn-oxide nanocatalyst, in which Ir atoms break the space group symmetry from I41/amd to P1. Tetrahedral Mn(II) in spinel is partially replaced by Ir, surprisingly resulting in an unprecedented crystal structure. We analyzed the distorted crystal structure of manganese oxide using TEM and investigated how the charge accumulation of Mn atoms is facilitated by the presence of a small amount of Ir.
RESUMO
Thin film solid oxide fuel cells (TF-SOFCs) are attracting attention due to their ability to operate at comparatively lower temperatures (400-650 °C) that are unattainable for conventional anode-supported SOFCs (650-800 °C). However, limited cathode performance and cell scalability remain persistent issues. Here, we report a new approach of fabricating yttria-stabilized zirconia (YSZ)-based TF-SOFCs via a scalable magnetron sputtering process. Notable is the development and deposition of a porous La0.6Sr0.4Co0.2Fe0.8O2.95(LSCF)-based cathode with a unique fibrous nanostructure. This all-sputtered cell shows an open-circuit voltage of â¼1.0 V and peak power densities of â¼1.7 and â¼2.5 W/cm2 at 600 and 650 °C, respectively, under hydrogen fuel and air along with showing stable performance in short-term testing. The power densities obtained in this work are the highest among YSZ-based SOFCs at these low temperatures, which demonstrate the feasibility of fabricating exceptionally high-performance TF-SOFC cells with distinctive dense or porous nanostructures for each layer, as desired, by a sputtering process. This work illustrates a new, potentially low-cost, and scalable platform for the fabrication of next-generation TF-SOFCs with excellent power output and stability.
RESUMO
The electrochemical reduction of carbon dioxide (CO2 ) to hydrocarbons is a challenging task because of the issues in controlling the efficiency and selectivity of the products. Among the various transition metals, copper has attracted attention as it yields more reduced and C2 products even while using mononuclear copper center as catalysts. In addition, it is found that reversible formation of copper nanoparticle acts as the real catalytically active site for the conversion of CO2 to reduced products. Here, it is demonstrated that the dinuclear molecular copper complex immobilized over graphitized mesoporous carbon can act as catalysts for the conversion of CO2 to hydrocarbons (methane and ethylene) up to 60%. Interestingly, high selectivity toward C2 product (40% faradaic efficiency) is achieved by a molecular complex based hybrid material from CO2 in 0.1 m KCl. In addition, the role of local pH, porous structure, and carbon support in limiting the mass transport to achieve the highly reduced products is demonstrated. Although the spectroscopic analysis of the catalysts exhibits molecular nature of the complex after 2 h bulk electrolysis, morphological study reveals that the newly generated copper cluster is the real active site during the catalytic reactions.
RESUMO
In insect eyes, ommatidia with hierarchical structured cornea play a critical role in amplifying and transferring visual signals to the brain through optic nerves, enabling the perception of various visual signals. Here, inspired by the structure and functions of insect ommatidia, a flexible photoimaging device is reported that can simultaneously detect and record incoming photonic signals by vertically stacking an organic photodiode and resistive memory device. A single-layered, hierarchical multiple-patterned back reflector that can exhibit various plasmonic effects is incorporated into the organic photodiode. The multiple-patterned flexible organic photodiodes exhibit greatly enhanced photoresponsivity due to the increased light absorption in comparison with the flat systems. Moreover, the flexible photoimaging device shows a well-resolved spatiotemporal mapping of optical signals with excellent operational and mechanical stabilities at low driving voltages below half of the flat systems. Theoretical calculation and scanning near-field optical microscopy analyses clearly reveal that multiple-patterned electrodes have much stronger surface plasmon coupling than flat and single-patterned systems. The developed methodology provides a versatile and effective route for realizing high-performance optoelectronic and photonic systems.
Assuntos
Nanoestruturas/química , Animais , Ouro/química , Nanopartículas Metálicas/química , Nanotecnologia/métodos , Ressonância de Plasmônio de SuperfícieRESUMO
BACKGROUND/AIMS: The progression and development of congestive heart failure is still considered a large problem despite the existence of revascularization therapies and optimal, state-of-the-art medical services. An acute myocardial infarction (AMI) is a major cause of congestive heart failure, so researchers are investigating techniques to complement primary percutaneous coronary intervention (PCI) or thrombolytic therapy to prevent congestive heart failure after AMI. METHODS: Twenty-six patients with successful PCI for acute ST-segment elevation anterior wall myocardial infarction were assigned to either a control group (n = 12) or a bone marrow mesenchymal stem cells (BM-MSC) group (n = 14). The control group received optimum post-infarction treatment, and the BMSC group received intracoronary delivery of autologous BMSC at 1 month after PCI with the optimum medical treatment. The primary endpoint was a left ventricular ejection fraction (LVEF) change from baseline to 4-month follow-up, as determined via myocardial single-photon emission computed tomography (SPECT). RESULTS: The global LVEF at baseline (determined 3.5 ± 1.5 days after PCI) was 35.4 ± 3.0% in the control group and 33.6 ± 4.7% in the BM-MSC group. BMSC transfer enhanced left ventricular systolic function primarily in anterior wall myocardial segments adjacent to the LAD infarcted area. Four months later, via SPECT, global LVEF had increased by 4.8 ± 1.9% in the control group and 8.8 ± 2.9% in the BM-MSC group (p = 0.031). The cell transfer did not increase the risk of adverse clinical events, in-stent restenosis, or proarrhythmic effects. The echocardiographic evaluation also revealed a significant increase in the LVEF value from baseline to the 4-month (9.0 ± 4.7 and 5.3 ± 2.6%, p = 0.023) and 12-month (9.9 ± 5.2% and 6.5 ± 2.7%, p = 0.048) follow-up in the BM-MSC group but not in the control group. CONCLUSIONS: Intracoronary administration of autologous BM-MSC was tolerable and safe with significant improvement in LVEF at 4-month (SPECT and echocardiography result) and 12-month (echocardiography result only) follow-up in patients with anterior AMI.
Assuntos
Infarto Miocárdico de Parede Anterior/cirurgia , Insuficiência Cardíaca/prevenção & controle , Transplante de Células-Tronco Mesenquimais , Infarto do Miocárdio com Supradesnível do Segmento ST/cirurgia , Volume Sistólico , Função Ventricular Esquerda , Idoso , Infarto Miocárdico de Parede Anterior/complicações , Infarto Miocárdico de Parede Anterior/diagnóstico por imagem , Infarto Miocárdico de Parede Anterior/fisiopatologia , Ecocardiografia , Feminino , Insuficiência Cardíaca/etiologia , Insuficiência Cardíaca/fisiopatologia , Humanos , Masculino , Transplante de Células-Tronco Mesenquimais/efeitos adversos , Pessoa de Meia-Idade , Intervenção Coronária Percutânea , Recuperação de Função Fisiológica , República da Coreia , Fatores de Risco , Infarto do Miocárdio com Supradesnível do Segmento ST/complicações , Infarto do Miocárdio com Supradesnível do Segmento ST/diagnóstico por imagem , Infarto do Miocárdio com Supradesnível do Segmento ST/fisiopatologia , Fatores de Tempo , Tomografia Computadorizada de Emissão de Fóton Único , Resultado do TratamentoRESUMO
By changing the rate of evaporation, two kinds of crystalline films composed of redox-active porous coordination networks (1 and 2) were selectively prepared on a gold-patterned substrate using a DMF solution of 2,5,8-tri(4-pyridyl)1,3-diazaphenalene and Cd(NO3)2. We found the highly sensitive humidity sensing ability of film 1. Single crystal structures and infrared spectroscopic analyses before and after hydration of a single crystal of 1 revealed the sensing mechanism: exchange of nitrate ions with water on Cd atoms occurred in hydrated conditions to generate a conductive cationic network.
RESUMO
The authors introduce the concept of a "frame structure graft" in which a harvested rib bone was adjusted to fit facial asymmetry. On the costochondral junction of the sixth or seventh rib, a 5 cm incision was made. Through a subperiosteal dissection, the rib bone was harvested. Using a reciprocating saw, the harvested rib was scored on its anterior surface as well as its posterior surface with a partial depth at different intervals. The harvested rib bone was placed on the skin surface of the unaffected side of the face and a curvature was created exactly matching that of the unaffected side by bending the bone using a greenstick fracture. Thereafter, the graft was adjusted to conceal the asymmetry of the deficient side. The adjusted "frame structure" was transferred to the defect through the incisions on the affected side, and the "frame structure" graft was placed on the mandible or zygoma. The graft fixation was done externally with at least 2 Kirschner wires (K-wires). From January 2005 to August 2013, a total of 30 patients (13 men, 17 women, mean age 25.6 years) received a frame structure graft. All 30 patients achieved good healing at the operation site without complications. Donor-site morbidity as pneumothorax from the rib bone harvest was not found. Merits of this frame structure graft, the authors think, are that this method could allow a similar curvature to the normal side. In addition, the procedure itself is easy.
Assuntos
Transplante Ósseo/métodos , Assimetria Facial/cirurgia , Costelas/transplante , Tecido Adiposo/transplante , Adulto , Fios Ortopédicos , Região Branquial/cirurgia , Feminino , Adesivo Tecidual de Fibrina/uso terapêutico , Seguimentos , Mentoplastia/métodos , Humanos , Masculino , Mandíbula/cirurgia , Osteotomia Sagital do Ramo Mandibular/métodos , Prognatismo/cirurgia , Procedimentos de Cirurgia Plástica/instrumentação , Procedimentos de Cirurgia Plástica/métodos , Síndrome , Adesivos Teciduais/uso terapêutico , Coleta de Tecidos e Órgãos/instrumentação , Coleta de Tecidos e Órgãos/métodos , Zigoma/cirurgia , Fraturas Zigomáticas/cirurgiaRESUMO
We demonstrate the modulation of silicon ring resonators at RF carrier frequencies higher than the resonance linewidth by coupling adjacent free-spectral-range (FSR) resonance modes. In this modulator scheme, the modulation frequency is matched to the FSR frequency. As an example, we demonstrate a 20 GHz modulation in a silicon ring with a resonance linewidth of only 11.7 GHz. We show theoretically that this modulator scheme has lower power consumption compared to a standard silicon ring modulator at high carrier frequencies. These results could enable future on-chip high-frequency analog communication and photonic signal processing on a silicon photonics platform.
RESUMO
We demonstrate gigahertz electro-optic modulator fabricated on low temperature polysilicon using excimer laser annealing technique compatible with CMOS backend integration. Carrier injection modulation at 3 Gbps is achieved. These results open up an array of possibilities for silicon photonics including photonics on DRAM and on flexible substrates.
RESUMO
OBJECT: This prospective randomized clinical study will address the efficacy of radiation (RT)-alone and combined with pre-RT chemotherapy (CTX) treatments and propose the novel standard treatment strategy for intracranial primary pure germinoma. MATERIALS AND METHODS: Between 2005 and 2008, there were 54 patients diagnosed with intracranial primary pure germinomas in a single institute. Twenty-eight patients were enrolled. The mean age of the patients was 16.2 years (range 6-31 years). There were 19 men and 9 women (men/women ratio = 2.1:1). There were 21 patients with solitary tumors and 7 with multiple tumors. These patients were randomized as RT-only treatment group (11 solitary and 3 multiple tumors) and combined (10 solitary and 4 multiple tumors, neo-adjuvant CTX followed by response-adapted RT) treatment group. The follow-up period for RT only group has a median of 58 months (mean 58.2 months, range 41-82 months), and for combine therapy group, the median was 68.5 months (mean 67.8 months, range 41-88 months). All 14 patients in the RT-only group showed complete response (CR) and no recurrence. Eleven patients in the combined group had CR and three patients had partial response after neo-adjuvant CTX. All patients responded to RT as CR without recurrence. At the time of analysis, all 28 patients were alive without evidence of disease. CONCLUSION: Neo-adjuvant CTX for localized germinomas seems to be unnecessary as a method to reduce radiation dose in our RT protocol. However, the effective control of multifocal or disseminated germinoma can be achieved by neo-adjuvant CTX followed by response-adapted reduced dose RT.
Assuntos
Antineoplásicos/administração & dosagem , Neoplasias Encefálicas/tratamento farmacológico , Neoplasias Encefálicas/radioterapia , Germinoma/tratamento farmacológico , Germinoma/radioterapia , Adolescente , Adulto , Neoplasias Encefálicas/patologia , Criança , Terapia Combinada/métodos , Feminino , Seguimentos , Germinoma/patologia , Humanos , Masculino , Resultado do Tratamento , Adulto JovemRESUMO
Soft-tissue deficiency is a critical issue in facial cosmetic and reconstructive surgery. Harvesting autografts from other anatomical sites has been a common practice in overcoming soft-tissue insufficiency for many years. However, donor-site complications and visible scars are of important concerns. Therefore, we would like to introduce an alternative donor site of free-tissue grafts and its inherent advantages: the retroauricular mastoid area located along the mastoid hair line. From August 1991 to June 2011, we performed facial reconstructive surgeries for cosmetic correction of disfigurements from both congenital and complications of previous cosmetic procedures on a total of 213 patients. These patients had undergone either 1 or more facial cosmetic surgeries in the past. In this study, our primary goal focused on revising facial asymmetries or defects from previous surgical scars, tissue contraction, undercorrection, or underdevelopment. For autograft harvesting, we incised an elliptical shape along the retroauricular hairline. We then harvested sufficient amount of skin, dermal fat, fascia, or a piece of the mastoid bone if needed. After harvesting, we closed the incisional area and covered it with a compressive dressing. In evaluation of our results, we compared the preoperative photographs with postoperative and constructed a survey on patient satisfaction. Overall, the patients in this study were greatly satisfied with their surgical results. No major complications were reported. As a result of our long-term study, we believe that the retroauricular mastoid area has been shown to be an indispensable donor site for a variety of autograft tissues in terms of safety, convenience, and versatility of its unique structural composition consisting of skin, dermal fat, fascia, and bone.
Assuntos
Técnicas Cosméticas , Face/cirurgia , Processo Mastoide/transplante , Procedimentos de Cirurgia Plástica/métodos , Transplante de Pele/métodos , Sítio Doador de Transplante/anatomia & histologia , Tecido Adiposo/transplante , Autoenxertos , Bandagens , Criança , Fáscia/transplante , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Reoperação , Adulto JovemRESUMO
Nanobody-modified gold nanoparticles were used to explore their ability to achieve selective targeting in vitro and in vivo to distinct cell type(s), based on the specificity of the nanobody that was installed. We developed conjugation methods that exploit click chemistry for octahedral â¼50 nm gold nanoparticles and chiral â¼180 nm gold nanoparticles. We determined that each of these particles could be modified with â¼75 and â¼330 nanobodies, respectively. Particle-bound nanobodies retain their antigen binding capacity. After conjugation of the mouse Class II MHC-specific nanobody VHH7 to chiral gold nanoparticles, selective targeting of Class II MHC-positive cell types was observed in vitro by fluorometric assays and by dark-field microscopy. Upon installation of the positron emission tomography (PET) isotopes 89Zr or 64Cu on nanobody-modified gold nanoparticles and retro-orbital injection of the radiolabeled particles, we observed accumulation predominantly in the liver and to a far lesser extent in the spleen, regardless of the size of the gold nanoparticles and the identity of the attached nanobody. We observed a striking difference in the distribution of radioisotope-labeled gold nanoparticles by changing the route of administration to intraperitoneal delivery. Significantly reduced accumulation in the liver and spleen was observed by intraperitoneal injection of nanoparticles. In the case of nanobody-modified gold nanoparticles injected intraperitoneally, prominent and persistent signals from the parathymic lymph nodes were observed in the PET/computed tomography images.
Assuntos
Nanopartículas Metálicas , Anticorpos de Domínio Único , Animais , Camundongos , Ouro , Anticorpos de Domínio Único/metabolismo , Tomografia por Emissão de Pósitrons , RadioisótoposRESUMO
The optimum composition ratio of the anode cermet (Ni-GDC) for solid oxide fuel cells (SOFCs) varies because the electron-collecting mechanism is different depending on its applications. A Co-sputtering method facilitates ratio control with sputtering power adjustment. However, there is a practical issue with fabricating anode cermet with various ratios attributed to the large sputtering yield gap of the metal target, Ni, and the ceramic target, gadolinia-doped ceria (GDC). Therefore, in this study, a Gd-Ce metal alloy was applied instead of GDC to match the sputtering rate with that of Ni, which enables a wide ratio range achievement. A thin film of Gd-Ce oxidized after deposition and successfully transformed to crystallized GDC under a SOFC operation environment. X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) confirmed its crystallinity, and the film deposited with various power ratios was sputtered on the ScSZ electrolyte pellet to clarify the optimum Ni-GDC ratio for thin-film SOFCs. Last, the Ni-GDC was applied to anodized aluminum oxide (AAO)-supported SOFCs to maximize the performance. The performance change according to the thickness of Ni-GDC was identified, and the best performance among them was 638 mW/cm2 at 500 °C.
RESUMO
Two-dimensional perovskite crystals have attracted significant attention for their diverse optoelectronic characteristics, owing to their superior semiconducting properties. However, the majority of studies to date have focused on single crystals, which pose challenges for integration into device arrays due to their incompatibility with selective growth or conventional lithography techniques. Here, a facile one-step solution process for synthesizing 2D perovskite crystal arrays is proposed through meniscus-guided coating on patterned substrates. We further utilized this method for the synthesis of lateral heterostructure nanoplate arrays. Six different 2D perovskite nanoplate arrays, including epitaxial heterostructures, are successfully realized. Optical and crystallographic characterizations show the high optical performance and crystallinity of the nanoplates. Moreover, this method is further employed to prepare high-performance 2D perovskite nanoplate photosensor arrays. This strategy can be utilized as a guideline for the fundamental investigation of optical properties and the development of high-performance optoelectronics of perovskite materials including photosensors and displays.
RESUMO
Chiral metamaterials have received significant attention due to their strong chiroptical interactions with electromagnetic waves of incident light. However, the fabrication of large-area, hierarchically manufactured chiral plasmonic structures with high dissymmetry factors (g-factors) over a wide spectral range remains the key barrier to practical applications. Here we report a facile yet efficient method to fabricate hierarchical chiral nanostructures over a large area (>11.7 × 11.7 cm2) and with high g-factors (up to 0.07 in the visible region) by imparting extrinsic chirality to nanostructured polymer substrates through the simple exertion of mechanical force. We also demonstrate the application of our approach in the polarized emission of quantum dots and information encryption, including chiral quick response codes and anti-counterfeiting. This study thus paves the way for the rational design and fabrication of large-area chiral nanostructures and for their application in quantum communications and security-enhanced optical communications.
RESUMO
Perovskite solar cells (PSCs) have delivered a power conversion efficiency (PCE) of more than 25% and incorporating polymers as hole-transporting layers (HTLs) can further enhance the stability of devices toward the goal of commercialization. Among the various polymeric hole-transporting materials, poly(triaryl amine) (PTAA) is one of the promising HTL candidates with good stability; however, the hydrophobicity of PTAA causes problematic interfacial contact with the perovskite, limiting the device performance. Using molecular side-chain engineering, a uniform 2D perovskite interlayer with conjugated ligands, between 3D perovskites and PTAA is successfully constructed. Further, employing conjugated ligands as cohesive elements, perovskite/PTAA interfacial adhesion is significantly improved. As a result, the thin and lateral extended 2D/3D heterostructure enables as-fabricated PTAA-based PSCs to achieve a PCE of 23.7%, improved from the 18% of reference devices. Owing to the increased ion-migration energy barrier and conformal 2D coating, unencapsulated devices with the new ligands exhibit both superior thermal stability under 60 °C heating and moisture stability in ambient conditions.
RESUMO
OBJECTIVE: Moderate-to-severe Parry-Romberg syndrome involves progressive atrophy of facial bony structures as well as changes in skin and subcutaneous tissue. To correct facial asymmetry in PRS patients, it is important to restore facial bony alignment and obtain a symmetrical appearance. METHODS: The authors propose a new combination method of onlay bone grafting and adipofascial free flap. Applying this technique, we performed rib bone graft with concomitant free flap transfer in 10 patients. All patients showed moderate-to-severe findings of PRS, involving skull deformity. Both male and female were 4 and 6 patients each, and the age of the patients at which they received surgery ranged from 10 to 52 years, with an average of 24.8 years of age. During the follow-up period, ancillary procedures including dermofat graft and hyaluronic acid filler injections were performed to achieve fine facial contour and facial symmetry. RESULTS: There were no severe complications such as infection or postoperative bleeding. All patients were satisfied with the result, and postoperative CT scanning revealed successful uptake of grafted bone. CONCLUSIONS: Onlay frame bone graft by using rib bone as donor material, with combination of facial fat free flap transfer can be an excellent choice in restoring facial symmetry in severe cases of progressive hemifacial atrophy.