Monitoring benzotriazoles: a 1 year study on concentrations and removal efficiencies in three different wastewater treatment plants.

Benzotriazole (BTri), 4- and 5-tolyltriazole (4-TTri, 5-TTri) were monitored over 1 year in three wastewater treatment plants (WWTPs) with a membrane bioreactor (MBR-MH) and two conventional activated sludge systems (CAS-E, CAS-M). The influent/effluent concentrations and treatment stages removal efficiencies were monitored. 5-TTri was removed best (mean removal 80%) in the WWTP mainly by biodegradation followed by BTri (mean removal 45%) and 4-TTri (mean removal 15%) that showed a significant lower elimination. High removal fluctuations for all three benzotriazoles occurred over the four seasons with lowest removal during winter. All three WWTPs constituted a point source for BTs in the aquatic environment as concentration measurements in the receiving rivers upstream and downstream of the WWTP proved. While MBR-MH and CAS-M significantly increased the downstream concentrations, CAS-E only slightly increased the downstream concentrations as the receiving river was already contaminated with benzotriazoles from hydropower. 5-TTri was detected in lowest concentrations due to its good removal compared to BTri and 4-TTri that contribute to high effluent concentrations with the potential to accumulate due to insufficient self-purification.

Specific binding of aluminium and iron ions to a cation-selective cell wall channel of Microthrix parvicella.

Heavy metal salts containing aluminium or iron are used in wastewater treatment to control excessive growth of the Gram-positive bacterium Microthrix parvicella, frequently observed in wastewater plants suffering from bulking, foaming and scum. Microthrix parvicella belongs to the class Actinobacteria but not to mycolata, although its taxonomic position in this class is not identified. Investigations using the microspheres adhesion to cells method (MAC) suggested that M. parvicella is as strongly hydrophobic as the mycolic acid containing actinomycetes. The cell wall of M. parvicella was investigated for the presence of water-filled channels using the lipid bilayer assay. An ion-permeable channel called MppA with a conductance of 600 pS in 1 M KCl was identified in cell wall extracts and purified to homogeneity. The cation-selective channel showed no voltage-dependent closure at higher voltages. Interestingly, MPPA could be blocked by heavy metal ions. Binding of polyvalent cations such as iron and aluminium was studied in titration experiments and revealed stability constants for their binding to MppA up to 700 M(-1). The cell wall channel of M. parvicella contains a binding site for polyvalent cations which may play a crucial role for the effect of heavy metals salts on M. parvicella-dominated activated sludge.

Characterization of pure cultures isolated from sulfamethoxazole-acclimated activated sludge with respect to taxonomic identification and sulfamethoxazole biodegradation potential.

BACKGROUND: Sulfamethoxazole (SMX, sulfonamide antibiotic) biodegradation by activated sludge communities (ASC) is still only partly understood. The present work is focusing on nine different bacteria species capable of SMX biodegradation that were isolated from SMX-acclimated ASC. RESULTS: Initially 110 pure cultures, isolated from activated sludge, were screened by UV-absorbance measurements (UV-AM) for their SMX biodegradation potential. Identification via almost complete 16S rRNA gene sequencing revealed five Pseudomonas spp., one Brevundimonas sp., one Variovorax sp. and two Microbacterium spp.. Thus seven species belonged to the phylum Proteobacteria and two to Actinobacteria. These cultures were subsequently incubated in media containing 10 mg L(-1) SMX and different concentrations of carbon (sodium-acetate) and nitrogen (ammonium-nitrate). Different biodegradation patterns were revealed with respect to media composition and bacterial species. Biodegradation, validated by LC-UV measurements to verify UV-AM, occurred very fast with 2.5 mg L(-1) d(-1) SMX being biodegraded in all pure cultures in, for UV-AM modified, R2A-UV medium under aerobic conditions and room temperature. However, reduced and different biodegradation rates were observed for setups with SMX provided as co-substrate together with a carbon/nitrogen source at a ratio of DOC:N - 33:1 with rates ranging from 1.25 to 2.5 mg L(-1) d(-1). CONCLUSIONS: Media containing only SMX as carbon and nitrogen source proved the organisms' ability to use SMX as sole nutrient source where biodegradation rates decreased to 1.0 - 1.7 mg L(-1) d-(1). The different taxonomically identified species showed specific biodegradation rates and behaviours at various nutrient conditions. Readily degradable energy sources seem to be crucial for efficient SMX biodegradation.

Filamentous scum bacteria in activated sludge plants: detection and identification quality by conventional activated sludge microscopy versus fluorescence in situ hybridization.

Detection of filamentous bacteria morphotypes involved in scum formation in activated sludge wastewater treatment plants by conventional sludge microscopy is often doomed to fail because of morphological and taxonomical variations. The aim of this study is to compare detection, identification, and quantification quality of filamentous "scum bacteria" found by conventional activated sludge microscopy and fluorescence in situ hybridization (FISH). In the case of filamentous Microthrix parvicella and Eikelboom morphotypes 1863 and 1851, conventional activated sludge microscopy and FISH results correspond well. In contrast, conventional activated sludge microscopy overlooks nocardioform actinomycete and type 1863 single cells. On the other hand, FISH underestimates filamentous nocardioform actinomycetes and morphotypes 0041/0675 or 0092 because of insufficient cell wall permeability or because of their taxonomic variability, with a resulting inadequacy of previously published probes. Nostocoida limicola morphotype results are still inconclusive because of low bacteria numbers being available in situ and the enormous taxonomic variability within this group.

Profiling 5-tolyltriazole biodegrading sludge communities using next-generation sequencing and denaturing gradient gel electrophoresis.

Efficient biodegradation of 5-tolyltriazole (5-TTri) in wastewater treatment would minimize its potential detrimental effects on aquatic systems. Therefore, in order to profile 5-TTri biodegrading activated sludge communities (ASC) by DGGE and NGS, acclimation experiments with (i) easily degradable substrates, and (ii) various complex substrates mimicking wastewater conditions were performed. DGGE revealed four genera: Aminobacter (family Phyllobacteriaceae), Flavobacterium (family Flavobacteriaceae), Pseudomonas (family Pseudomonaceae), and Hydrogenophaga (family Comamonadaceae). Metagenomics (DNA) revealed the dominant families Alcaligenaceae, Pseudomonadaceae and Comamonadaceae that also represented the most active families at the RNA level (metatranscriptomics), which might indicate their importance for 5-TTri biodegradation. ASC acclimation and the composition of the substrate significantly affected 5-TTri biodegradation and the development of biodegrading communities. Using acetate only, a moderate 5-TTri degrading community was detected with a very low biodiversity and Pseudomonas spp. as dominant organisms. In contrast, setups fed 'sludge supernatant' (a complex substrate) efficiently biodegraded 5-TTri and formed a more diverse microbial community but with Hydrogenophaga spp. as the dominant group. Finally, a hypothetical 5-TTri biodegradation pathway was constructed based exclusively on the detected, biodegradation-related, Hydrogenophaga spp. genes.

Modern scientific methods and their potential in wastewater science and technology.

Application of novel analytical and investigative methods such as fluorescence in situ hybridization, confocal laser scanning microscopy (CLSM), microelectrodes and advanced numerical simulation has led to new insights into micro- and macroscopic processes in bioreactors. However, the question is still open whether or not these new findings and the subsequent gain of knowledge are of significant practical relevance and if so, where and how. To find suitable answers it is necessary for engineers to know what can be expected by applying these modern analytical tools. Similarly, scientists could benefit significantly from an intensive dialogue with engineers in order to find out about practical problems and conditions existing in wastewater treatment systems. In this paper, an attempt is made to help bridge the gap between science and engineering in biological wastewater treatment. We provide an overview of recently developed methods in microbiology and in mathematical modeling and numerical simulation. A questionnaire is presented which may help generate a platform from which further technical and scientific developments can be accomplished. Both the paper and the questionnaire are aimed at encouraging scientists and engineers to enter into an intensive, mutually beneficial dialogue.

Screening and monitoring microbial xenobiotics' biodegradation by rapid, inexpensive and easy to perform microplate UV-absorbance measurements.

BACKGROUND: Evaluation of xenobiotics biodegradation potential, shown here for benzotriazoles (corrosion inhibitors) and sulfamethoxazole (sulfonamide antibiotic) by microbial communities and/or pure cultures normally requires time intensive and money consuming LC/GC methods that are, in case of laboratory setups, not always needed. RESULTS: The usage of high concentrations to apply a high selective pressure on the microbial communities/pure cultures in laboratory setups, a simple UV-absorbance measurement (UV-AM) was developed and validated for screening a large number of setups, requiring almost no preparation and significantly less time and money compared to LC/GC methods. This rapid and easy to use method was evaluated by comparing its measured values to LC-UV and GC-MS/MS results. Furthermore, its application for monitoring and screening unknown activated sludge communities (ASC) and mixed pure cultures has been tested and approved to detect biodegradation of benzotriazole (BTri), 4- and 5-tolyltriazole (4-TTri, 5-TTri) as well as SMX. CONCLUSIONS: In laboratory setups, xenobiotics concentrations above 1.0 mg L(-1) without any enrichment or preparation could be detected after optimization of the method. As UV-AM does not require much preparatory work and can be conducted in 96 or even 384 well plate formats, the number of possible parallel setups and screening efficiency was significantly increased while analytic and laboratory costs were reduced to a minimum.

Effect of acclimation and nutrient supply on 5-tolyltriazole biodegradation with activated sludge communities.

The corrosion inhibitor 5-tolyltriazole (5-TTri) can have a detrimental impact on aquatic systems thus implying an acute need to reduce the effluent concentrations of 5-TTri. In this study, 5-TTri biodegradation was enhanced through acclimation and nutrient supply. Activated sludge communities (ASC) were setup in nine subsequent ASC generations. While generation two showed a lag phase of five days without biodegradation, generations four to nine utilized 5-TTri right after inoculation, with biodegradation rates from 3.3 to 5.2 mg L(-1)d(-1). Additionally, centrifuged AS supernatant was used to simulate the nutrient conditions in wastewater. This sludge supernatant (SS) significantly enhanced biodegradation, resulting in removal rates ranging from 3.2 to 5.0 mg L(-1)d(-1) without acclimation while the control groups without SS observed lower rates of ⩽ 2.2 mg L(-1)d(-1).

Determination of optimal conditions for 5-methyl-benzotriazole biodegradation with activated sludge communities by dilution of the inoculum.

The aerobic biodegradation of 5-methyl-benzotriazole (5-TTri) was optimized using lab-scale setups and activated sludge communities (ASC) collected from three wastewater treatment plants (WWTP) MBR-MH, CAS-E and CAS-M being different in their treatment technologies. ASC inocula were diluted to rule out non-biodegrading species and incubated under two nutrient conditions: A) mineral salt media (MSM) and B) carbon and nitrogen supplied MSM giving MSM-CN. 5-TTri removal with the ASC ranged from 60% to 100% in only 10 days. 100 µL suspended biomass from the biodegrading setups was subsequently plated on solid media to eliminate possible activated sludge remnants. After growth occurred, mixed colonies were harvested and inoculated in fresh liquid MSM containing 20 mg L(-1) 5-TTri. These bacterial consortia showed good 5-TTri removal in MSM-CN rather than in MSM, indicating nutrient supply being required for efficient biodegradation. In addition, experiments with high 5-TTri concentrations ranging from 20 to 1,000 mg L(-1) were conducted in both, MSM and MSM-CN and the maximal 5-TTri removal capacity of the ASC evaluated. 50 mg L(-1) 5-TTri was still removed in both media whereas 100 mg L(-1) was solely removed in MSM-CN. 5-TTri biodegradation patterns also indicated that 5-TTri might be co-metabolized by microbial consortia. Furthermore, experiments with gradient-solid-media-plates showed 5-TTri to be inhibitory for the ASC in concentrations above 50 mg L(-1) and revealed the optimal conditions regarding carbon and nitrogen concentration and pH value for effective 5-TTri biodegradation by ASC. Nitrogen proved a crucial factor for enhancing organisms' biodegradation capacity with an optimal pH around 7 while carbon showed no such effect.

Xenobiotic benzotriazoles--biodegradation under meso- and oligotrophic conditions as well as denitrifying, sulfate-reducing, and anaerobic conditions.

The intensive use of benzotriazoles as corrosion inhibitors for various applications and their application in dishwasher detergents result in an almost omnipresence of benzotriazole (BTri), 4-methyl- and 5-methyl-benzotriazole (4-TTri and 5-TTri, respectively) in aquatic systems. This study aims on the evaluation of the biodegradation potential of activated sludge communities (ASCs) toward the three benzotriazoles regarding aerobic, anoxic, and anaerobic conditions and different nutrients. ASCs were taken from three wastewater treatment plants with different technologies, namely, a membrane bioreactor (MBR-MH), a conventional activated sludge plant CAS-E (intermittent nitrification/denitrification), and CAS-M (two-stage activated sludge treatment) and used for inoculation of biodegradation setups. All ASCs eliminated up to 30 mg L(-1) 5-TTri and BTri under aerobic conditions within 2-7 and 21-49 days, respectively, but not under anoxic or anaerobic conditions. 4-TTri was refractory at all conditions tested. Significant differences were observed for BTri biodegradation with non-acclimated ASCs from MBR-MH with 21 days, CAS-E with 41 days, and CAS-M with 49 days. Acclimated ASCs removed BTri within 7 days. Furthermore, different carbon and nitrogen concentrations revealed that nitrogen was implicitly required for biodegradation while carbon showed no such effect. The fastest biodegradation occurred for 5-TTri with no need for acclimatization, followed by BTri. BTri showed sludge-specific biodegradation patterns, but, after sludge acclimation, was removed with the same pattern, regardless of the sludge used. Under anaerobic conditions in the presence of different electron acceptors, none of the three compounds showed biological removal. Thus, presumably, aerobic biodegradation is the major removal mechanism in aquatic systems.

Aerobic biodegradation of the sulfonamide antibiotic sulfamethoxazole by activated sludge applied as co-substrate and sole carbon and nitrogen source.

Potential aerobic biodegradation mechanisms of the widely used polar, low-adsorptive sulfonamide antibiotic sulfamethoxazole (SMX) were investigated in activated sludge at bench scale. The study focused on (i) SMX co-metabolism with acetate and ammonium nitrate and (ii) SMX utilization when present as the sole carbon and nitrogen source. With SMX adsorption being negligible, elimination was primarily based on biodegradation. Activated sludge was able to utilize SMX both as a carbon and/or nitrogen source. SMX biodegradation was enhanced when a readily degradable energy supply (acetate) was provided which fostered metabolic activity. Moreover, it was raised under nitrogen deficiency conditions. The mass balance for dissolved organic carbon showed an incomplete SMX mineralization with two scenarios: (i) with SMX as a co-substrate, 3-amino-5-methyl-isoxazole represented the main stable metabolite and (ii) SMX as sole carbon and nitrogen source possibly yielded hydroxyl-N-(5-methyl-1,2-oxazole-3-yl)benzene-1-sulfonamide as a further metabolite.