RESUMO
Regulating the coordination environment of atomically dispersed catalysts is vital for catalytic reaction but still remains a challenge. Herein, an ionic exchange strategy is developed to fabricate atomically dispersed copper (Cu) catalysts with controllable coordination structure. In this process, the adsorbed Cu ions exchange with Zn nodes in ZIF-8 under high temperature, resulting in the trapping of Cu atoms within the cavities of the metal-organic framework, and thus forming Cu single-atom catalysts. More importantly, altering pyrolysis temperature can effectively control the structure of active metal center at atomic level. Specifically, higher treatment temperature (900 °C) leads to unsaturated Cu-nitrogen architecture (CuN3 moieties) in atomically dispersed Cu catalysts. Electrochemical test indicates atomically dispersed Cu catalysts with CuN3 moieties possess superior oxygen reduction reaction performance than that with higher Cu-nitrogen coordination number (CuN4 moieties), with a higher half-wave potential of 180 mV and the 10 times turnover frequency than that of CuN4 . Density functional theory calculation analysis further shows that the low N coordination number of Cu single-atom catalysts (CuN3 ) is favorable for the formation of O2 * intermediate, and thus boosts the oxygen reduction reaction.
RESUMO
Oxidative desulfurization is considered to be one of the most promising methods for producing ultra-low-sulfur fuels because it can effectively remove refractory sulfur-containing aromatic compounds under mild conditions. In this work, the oxidative desulfurization performance over UiO-66(Zr) is greatly enhanced by Ti ion exchange. This strategy is not only efficient for UiO-66(Zr) with crystal defects but also for UiO-66(Zr) with high crystallinity. In particular, the performance of UiO-66(Zr) with high crystallinity in the oxidative desulfurization of dibenzothiophene can be improved more than 11-fold, which can be mainly attributed to the introduction of active Ti sites.
RESUMO
Described for the first time is that carbon dioxide (CO2 ) can be successfully inserted into aryl C-H bonds of the backbone of a metal-organic framework (MOF) to generate free carboxylate groups, which serve as Brønsted acid sites for efficiently catalyzing the methanolysis of epoxides. The work delineates the very first example of utilizing CO2 for heterogeneous C-H activation and carboxylation reactions on MOFs, and opens a new avenue for CO2 chemical transformations under mild reaction conditions.
RESUMO
We report a strategy of combining a Brønsted acid metal-organic framework (MOF) with Lewis acid centers to afford a Lewis acid@Brønsted acid MOF with high catalytic activity, as exemplified in the context of MIL-101-Cr-SO3H·Al(III). Because of the synergy between the Brønsted acid framework and the Al(III) Lewis acid centers, MIL-101-Cr-SO3H·Al(III) demonstrates excellent catalytic performance in a series of fixed-bed reactions, outperforming two benchmark zeolite catalysts (H-Beta and HMOR). Our work therefore not only provides a new approach to achieve high catalytic activity in MOFs but also paves a way to develop MOFs as a new type of highly efficient heterogeneous catalysts for fixed-bed reactions.
RESUMO
Catalyst systems populated by high-density single atoms are crucial for improving catalytic activity and selectivity, which can potentially maximize the industrial prospects of heterogeneous single-atom catalysts (SACs). However, achieving high-loading SACs with metal contents above 10 wt% remains challenging. Here we describe a general negative pressure annealing strategy to fabricate ultrahigh-loading SACs with metal contents up to 27.3-44.8 wt% for 13 different metals on a typical carbon nitride matrix. Furthermore, our approach enables the synthesis of high-entropy single-atom catalysts (HESACs) that exhibit the coexistence of multiple metal single atoms with high metal contents. In-situ aberration-corrected HAADF-STEM (AC-STEM) combined with ex-situ X-ray absorption fine structure (XAFS) demonstrate that the negative pressure annealing treatment accelerates the removal of anionic ligand in metal precursors and boosts the bonding of metal species with N defective sites, enabling the formation of dense N-coordinated metal sites. Increasing metal loading on a platinum (Pt) SAC to 41.8 wt% significantly enhances the activity of propane oxidation towards liquid products, including acetone, methanol, and acetic acid et al. This work presents a straightforward and universal approach for achieving many low-cost and high-density SACs for efficient catalytic transformations.
RESUMO
Achieving effective hydrogen evolution/oxidation reaction (HER/HOR) across a wide pH span is of critical importance in unlocking the full potential of hydrogen energy but remains intrinsically challenging. Here, we engineer the N-coordinated Ir-Mo dual atoms on a carbon matrix by ultrafast high-temperature sintering, creating an efficient bifunctional electrocatalyst for both HER and HOR in both acidic and alkaline electrolytes. The optimized catalyst, Ir-Mo DAC/NC, demonstrates exceptional performance, with a significantly reduced HER overpotential of 11.3 mV at 10 mA/cm2 and a HOR exchange current (i0,m) of 3972 mA/mgIr in acidic conditions, surpassing the performance of Pt/C and Ir/C catalysts. In alkaline conditions, Ir-Mo DAC/NC also outperforms Pt/C, as evidenced by its low HER overpotential of 23 mV at 10 mA/cm2 and a high i0,m of 1308 mA/mgIr. Furthermore, our catalyst exhibits remarkable stability in both acidic and alkaline environments. DFT calculations results reveal that the superior electrochemical performance of Ir-Mo DAC/NC arises from the electronic synergy between Ir and Mo pairs, which regulates the interaction between the intermediates and active sites. These findings present a promising strategy for the development of dual-atom catalysts (DACs), with potential applications in the polymer fuel cells and water electrolyzers.
RESUMO
Electrocatalytic acetylene semi-hydrogenation to ethylene powered by renewable electricity represents a sustainable pathway, but the inadequate current density and single-pass yield greatly impedes the production efficiency and industrial application. Herein, we develop a F-modified Cu catalyst that shows an industrial partial current density up to 0.76 A cm-2 with an ethylene Faradic efficiency surpass 90%, and the maximum single-pass yield reaches a notable 78.5%. Furthermore, the Cu-F showcase the capability to directly convert acetylene into polymer-grade ethylene in a tandem flow cell, almost no acetylene residual in the production. Combined characterizations and calculations reveal that the Cuδ+ (near fluorine) enhances the water dissociation, and the generated active hydrogen are immediately transferred to Cu0 (away from fluorine) and react with the locally adsorbed acetylene. Therefore, the hydrogen evolution reaction is surpassed and the overall acetylene semi-hydrogenation performance is boosted. Our findings provide new opportunity towards rational design of catalysts for large-scale electrosynthesis of ethylene and other important industrial raw.
RESUMO
Understanding the dynamical evolution from metal ions to single atoms is of great importance to the rational development of synthesis strategies for single atom catalysts (SACs) against metal sintering during pyrolysis. Herein, an in situ observation is disclosed that the formation of SACs is ascertained as a two-step process. There is initially metal sintering into nanoparticles (NPs) (500-600 °C), followed by the conversion of NPs into metal single atoms (Fe, Co, Ni, Cu SAs) at higher temperature (700-800 °C). Theoretical calculations together with control experiments based on Cu unveil that the ion-to-NP conversion can arise from the carbon reduction, and NP-to-SA conversion being steered by generating more thermodynamically stable Cu-N4 configuration instead of Cu NPs. Based on the evidenced mechanism, a two-step pyrolysis strategy to access Cu SACs is developed, which exhibits excellent ORR performance.
RESUMO
Single-atom catalysts with a tunable coordination structure have shown grand potential in flexibly altering the selectivity of oxygen reduction reaction (ORR) toward the desired pathway. However, rationally mediating the ORR pathway by modulating the local coordination number of the single-metal sites is still challenging. Herein, we prepare the Nb single-atom catalysts (SACs) with an external-shell oxygen-modulated unsaturated NbN3 site in carbon nitride and the NbN4 site anchored in nitrogen-doped carbon carriers, respectively. Compared with typical NbN4 moieties for 4e- ORR, the as-prepared NbN3 SACs exhibit excellent 2e- ORR activity in 0.1 M KOH, with the onset overpotential close to zero (9 mV) and the H2O2 selectivity above 95%, making it one of the state-of-the-art catalysts in the electrosynthesis of hydrogen peroxide. Density functional theory (DFT) theoretical calculations indicate the unsaturated Nb-N3 moieties and the adjacent oxygen groups optimize the interface bond strength of pivotal intermediates (OOH*) for producing H2O2, thus accelerating the 2e- ORR pathway. Our findings may provide a novel platform for developing SACs with high activity and tunable selectivity.
RESUMO
Simultaneously optimizing elementary steps, such as water dissociation, hydroxyl transferring, and hydrogen combination, is crucial yet challenging for achieving efficient hydrogen evolution reaction (HER) in alkaline media. Herein, Ru single atom-doped WO2 nanoparticles with atomically dispersed Ru-W pair sites (Ru-W/WO2 -800) are developed using a crystalline lattice-confined strategy, aiming to gain efficient alkaline HER. It is found that Ru-W/WO2 -800 exhibits remarkable HER activity, characterized by a low overpotential (11 mV at 10 mA cm-2 ), notable mass activity (5863 mA mg-1 Ru at 50 mV), and robust stability (500 h at 250 mA cm-2 ). The highly efficient activity of Ru-W/WO2 -800 is attributed to the synergistic effect of Ru-W sites through ensemble catalysis. Specifically, the W sites expedite rapid hydroxyl transferring and water dissociation, while the Ru sites accelerate the hydrogen combination process, synergistically facilitating the HER activity. This study opens a promising pathway for tailoring the coordination environment of atomic-scale catalysts to achieve efficient electro-catalysis.
RESUMO
Exploring highly active and cost-effective catalysts for styrene epoxidation is of great significance, but it remains challenging to simultaneously achieve excellent conversion and selectivity toward styrene oxide. In this work, the structures and performance of Co, Fe, and Cu single-atom catalysts (SACs) in styrene epoxidation with tert-butyl hydroperoxide (TBHP) are predicted using density functional theory (DFT) calculations. The results reveal that the Co-N structure prefers that of styrene oxide over Fe-N and Cu-N structures. This predicted result is verified via catalytic evaluations, where the Co SACs displayed significantly higher styrene oxide selectivity than Fe and Cu SACs. Moreover, the activity of Co SAC can be further improved by the construction of unsaturated vacancy-defect cobalt single sites. As a result, excellent performance with styrene conversion of 99.9% and styrene oxide selectivity of 71% is achieved after a reaction time of 8 h on the optimal Co SAC.
RESUMO
The control of defects in crystalline materials has long been of significance since the defects are correlated with the performances of the materials. Yet such control remains a challenge for metal-organic frameworks (MOFs), which are usually well-crystallized under hydro-/solvothermal conditions. In this contribution, we demonstrate for the first time how to increase the defects of MOF via a facile and green approach as exemplified in the context of solvent-free synthesis of UiO-66(Zr). Such increase of defects leads to drastic enhancement of catalysis performance when compared to UiO-66(Zr) prepared from conventional hydro-/solvothermal synthesis. Our work therefore not only opens a new door for boosting the catalytic activities of MOFs but also contributes a new approach to control the defects in crystalline materials for various applications.
RESUMO
A series of prototypal metal-organic frameworks (MOFs) consisting of polyhedral cages with accessible Lewis-acid sites, have been systematically investigated for Friedländer annulation reaction, a straightforward approach to synthesizing quinoline and its derivatives. Amongst them MMCF-2 demonstrates significantly enhanced catalytic activity compared with the benchmark MOFs, HKUST-1 and MOF-505, as a result of a high-density of accessible Cu(II) Lewis acid sites and large window size in the cuboctahedral cage-based nanoreactor of MMCF-2.