Size-dependent charge transfer between water microdroplets.

Contact electrification (CE) in water has attracted much attention, owing to its potential impacts on the chemical reactions, such as the recent discovery of spontaneous generation of hydrogen peroxide (H2O2) in water microdroplets. However, current studies focus on the CE of bulk water, the measurement of CE between micrometer-size water droplets is a challenge and its mechanism still remains ambiguous. Here, a method for quantifying the amount of charge carried by the water microdroplets produced by ultrasonic atomization is proposed. In the method, the motions of water microdroplets in a uniform electric field are observed and the electrostatic forces on the microdroplets are calculated based on the moving speed of the microdroplets. It is revealed that the charge transfer between water microdroplets is size-dependent. The large microdroplets tend to be positively charged while the small microdroplets tend to receive negative charges, implying that the negative charges transfer from large microdroplets to the small microdroplets during ultrasonic atomization. Further, a theoretical model for microdroplets charging is proposed, in which the curvature-induced surface potential/energy difference is suggested to be responsible for the charge transfer between microdroplets. The findings show that the electric field strength between two microdroplets with opposite charges during separation is strong enough to convert OH‒ to OH*, providing evidence for the CE-induced spontaneous generation of H2O2 in water microdroplets.

A Rolling-Bead Triboelectric Nanogenerator for Harvesting Omnidirectional Wind-Induced Energy toward Shelter Forests Monitoring.

Shelter forests (or shelter-belts), while crucial for climate regulation, lack monitoring systems, e.g., Internet of Things (IoT) devices, but their abundant wind energy can potentially power these devices using the trees as mounting points. To harness wind energy, an omnidirectional fluid-induced vibration triboelectric nanogenerator (OFIV-TENG) has been developed. The device is installed on shelter forest trees to harvest wind energy from all directions, employing a fluid-induced vibration (FIV) mechanism (fluid-responding structure) that can capture and use wind energy, ranging from low wind speeds (vortex vibration) to high wind speeds (galloping). The rolling-bead triboelectric nanogenerator (TENG) can efficiently harvest energy while minimizing wear and tear. Additionally, the usage of double electrodes results in an effective surface charge density of 21.4 µC m-2 , which is the highest among all reported rolling-bead TENGs. The collected energy is utilized for temperature and humidity monitoring, providing feedback on the effect of climate regulation in shelter forests, alarming forest fires, and wireless wind speed warning. In general, this work provides a promising and rational strategy, using natural resources like trees as the supporting structures, and shows broad application prospects in efficient energy collection, wind speed warning, and environmentally friendliness.

Publisher Correction: Magnetoelectric inversion of domain patterns.

Four incorrect figure citations in this Letter have been corrected online.

Magnetoelectric inversion of domain patterns.

The inversion of inhomogeneous physical states has great technological importance; for example, active noise reduction relies on the emission of an inverted sound wave that interferes destructively with the noise of the emitter1, and inverting the evolution of a spin system by using a magnetic-field pulse enables magnetic resonance tomography2. In contrast to these examples, inversion of a distribution of ferromagnetic or ferroelectric domains within a material is surprisingly difficult: field poling creates a single-domain state, and piece-by-piece inversion using a scanning tip is impractical. Here we report inversion of entire ferromagnetic and ferroelectric domain patterns in the magnetoelectric material Co3TeO6 and the multiferroic material Mn2GeO4, respectively. In these materials, an applied magnetic field reverses the magnetization or polarization, respectively, of each domain, but leaves the domain pattern intact. Landau theory indicates that this type of magnetoelectric inversion is universal across materials that exhibit complex ordering, with one order parameter holding the memory of the domain structure and another setting its overall sign. Domain-pattern inversion is only one example of a previously unnoticed effect in systems such as multiferroics, in which several order parameters are available for combination. Exploring these effects could therefore advance multiferroics towards new levels of functionality.

Influence of breast cancer risk factors on proliferation and DNA damage in human breast glandular tissues: role of intracellular estrogen levels, oxidative stress and estrogen biotransformation.

Breast cancer etiology is associated with both proliferation and DNA damage induced by estrogens. Breast cancer risk factors (BCRF) such as body mass index (BMI), smoking, and intake of estrogen-active drugs were recently shown to influence intratissue estrogen levels. Thus, the aim of the present study was to investigate the influence of BCRF on estrogen-induced proliferation and DNA damage in 41 well-characterized breast glandular tissues derived from women without breast cancer. Influence of intramammary estrogen levels and BCRF on estrogen receptor (ESR) activation, ESR-related proliferation (indicated by levels of marker transcripts), oxidative stress (indicated by levels of GCLC transcript and oxidative derivatives of cholesterol), and levels of transcripts encoding enzymes involved in estrogen biotransformation was identified by multiple linear regression models. Metabolic fluxes to adducts of estrogens with DNA (E-DNA) were assessed by a metabolic network model (MNM) which was validated by comparison of calculated fluxes with data on methoxylated and glucuronidated estrogens determined by GC- and UHPLC-MS/MS. Intratissue estrogen levels significantly influenced ESR activation and fluxes to E-DNA within the MNM. Likewise, all BCRF directly and/or indirectly influenced ESR activation, proliferation, and key flux constraints influencing E-DNA (i.e., levels of estrogens, CYP1B1, SULT1A1, SULT1A2, and GSTP1). However, no unambiguous total effect of BCRF on proliferation became apparent. Furthermore, BMI was the only BCRF to indeed influence fluxes to E-DNA (via congruent adverse influence on levels of estrogens, CYP1B1 and SULT1A2).

Influence of breast cancer risk factors and intramammary biotransformation on estrogen homeostasis in the human breast.

Understanding intramammary estrogen homeostasis constitutes the basis of understanding the role of lifestyle factors in breast cancer etiology. Thus, the aim of the present study was to identify variables influencing levels of the estrogens present in normal breast glandular and adipose tissues (GLT and ADT, i.e., 17ß-estradiol, estrone, estrone-3-sulfate, and 2-methoxy-estrone) by multiple linear regression models. Explanatory variables (exVARs) considered were (a) levels of metabolic precursors as well as levels of transcripts encoding proteins involved in estrogen (biotrans)formation, (b) data on breast cancer risk factors (i.e., body mass index, BMI, intake of estrogen-active drugs, and smoking) collected by questionnaire, and (c) tissue characteristics (i.e., mass percentage of oil, oil%, and lobule type of the GLT). Levels of estrogens in GLT and ADT were influenced by both extramammary production (menopausal status, intake of estrogen-active drugs, and BMI) thus showing that variables known to affect levels of circulating estrogens influence estrogen levels in breast tissues as well for the first time. Moreover, intratissue (biotrans)formation (by aromatase, hydroxysteroid-17beta-dehydrogenase 2, and beta-glucuronidase) influenced intratissue estrogen levels, as well. Distinct differences were observed between the exVARs exhibiting significant influence on (a) levels of specific estrogens and (b) the same dependent variables in GLT and ADT. Since oil% and lobule type of GLT influenced levels of some estrogens, these variables may be included in tissue characterization to prevent sample bias. In conclusion, evidence for the intracrine activity of the human breast supports biotransformation-based strategies for breast cancer prevention. The susceptibility of estrogen homeostasis to systemic and tissue-specific modulation renders both beneficial and adverse effects of further variables associated with lifestyle and the environment possible.

Novel insight in estrogen homeostasis and bioactivity in the ACI rat model of estrogen-induced mammary gland carcinogenesis.

Despite being widely used to investigate 17ß-estradiol (E2)-induced mammary gland (MG) carcinogenesis and prevention thereof, estrogen homeostasis and its significance in the female August Copenhagen Irish (ACI) rat model is unknown. Thus, levels of 12 estrogens including metabolites and conjugates were determined mass spectrometrically in 38 plasmas and 52 tissues exhibiting phenotypes ranging from normal to palpable tumor derived from a representative ACI study using two different diets. In tissues, 40 transcripts encoding proteins involved in estrogen (biotrans)formation, ESR1-mediated signaling, proliferation and oxidative stress were analyzed (TaqMan PCR). Influence of histo(patho)logic phenotypes and diet on estrogen and transcript levels was analyzed by 2-way ANOVA and explanatory variables influencing levels and bioactivity of estrogens in tissues were identified by multiple linear regression models. Estrogen profiles in tissue and plasma and the influence of Hsd17b1 levels on intra-tissue levels of E2 and E1 conclusively indicated intra-mammary formation of E2 in ACI tumors by HSD17B1-mediated conversion of E1. Proliferation in ACI tumors was influenced by Egfr, Igf1r, Hgf and Met levels. 2-MeO-E1, the only oxidative estrogen metabolite detected above 28-42 fmol/g, was predominately observed in hyperplastic tissues and intra-tissue conversion of E1 seemed to contribute to its levels. The association of the occurrence of 2-MeO-E1 with higher levels of oxidative stress observed in hyperplastic and tumor tissues remained equivocal. Thus, the present study provides mechanistic explanation for previous and future results observed in the ACI model.

Qualitative and quantitative differences in estrogen biotransformation in human breast glandular and adipose tissues: implications for studies using mammary biospecimens.

Because of its assumed role in breast cancer etiology, estrogen biotransformation (and interaction of compounds therewith) has been investigated in human biospecimens for decades. However, little attention has been paid to the well-known fact that large inter-individual variations exist in the proportion of breast glandular (GLT) and adipose (ADT) tissues and less to adequate tissue characterization. To assess the relevance of this, the present study compares estrogen biotransformation in GLT and ADT. GLT and ADT were isolated from 47 reduction mammoplasty specimens derived from women without breast cancer and were characterized histologically and by their percentages of oil. Levels of 12 unconjugated and five conjugated estrogens were analyzed by GC- and UHPLC-MS/MS, respectively, and levels of 27 transcripts encoding proteins involved in estrogen biotransformation by Taqman® probe-based PCR. Unexpectedly, one-third of specimens provided neat GLT only after cryosection. Whereas 17ß-estradiol, estrone, and estrone-3-sulfate were detected in both tissues, estrone-3-glucuronide and 2-methoxy-estrone were detected predominately in GLT and ADT, respectively. Estrogen levels as well as ratios 17ß-estradiol/estrone and estrone-3-sulfate/estrone differed significantly between GLT and ADT, yet less than between individuals. Furthermore, estrogen levels in GLT and ADT correlated significantly with each other. In contrast, levels of most transcripts encoding enzymes involved in biotransformation differed more than between individuals and did not correlate between ADT and GLT. Thus, mixed breast tissues (and plasma) will not provide meaningful information on local estrogen biotransformation (and interaction of compounds therewith) whereas relative changes in 17ß-estradiol levels may be investigated in the more abundant ADT.

Influence of block copolymer feature size on reactive ion etching pattern transfer into silicon.

A successful realisation of sub-20 nm features on silicon (Si) is becoming the focus of many technological studies, strongly influencing the future performance of modern integrated circuits. Although reactive ion etching (RIE), at both micrometric and nanometric scale has already been the target of many studies, a better understanding of the different mechanisms involved at sub-20 nm size etching is still required. In this work, we investigated the influence of the feature size on the etch rate of Si, performed by a cryogenic RIE process through cylinder-forming polystyrene-block-polymethylmethacrylate (PS-b-PMMA) diblock copolymer (DBC) masks with diameter ranging between 19-13 nm. A sensible decrease of the etch depth and etch rate was observed in the mask with the smallest feature size. For all the DBCs under investigation, we determined the process window useful for the correct transfer of the nanometric cylindrical pattern into a Si substrate. A structural and physicochemical investigation of the resulting nanostructured Si is reported in order to delineate the influence of various RIE pattern effects. Feature-size-dependent etch, or RIE-lag, is proved to significantly affect the obtained results.

Parotid Gland Lesions: Multiparametric Ultrasound and MRI Features.

High-resolution ultrasound (US), as a readily available, cost-effective and harmless imaging technique, is appropriately the initial imaging modality for salivary gland lesions. Benign tumors are reported to present with regular and well-defined margins, a homogeneous hypoechoic structure and demarcated vessel distribution, whereas malignant lesions are irregular, heterogeneous and diffusely perfused. Ultrasound and color Doppler features of benign and malignant salivary gland lesions overlap, and many benign tumors, particularly pleomorphic adenomas, may appear irregularly shaped, with a heterogeneous echo-structure indistinguishable from a malignant lesion. Often skilled US operators are not always able to differentiate benign from malignant lesions. The introduction of US contrast agents has allowed further perspectives in the possible improvement of lesion characterization, and the emergence of US elastography, an innovative tool for assessing lesion stiffness/elasticity characteristics, has been advocated for differentiating salivary gland lesions. When lesions are atypical on US, contrast-enhanced magnetic resonance (MR) imaging is usually the definitive imaging modality. We present a current review of benign and malignant parotid gland tumors with emphasis on the role of multiparametric US and MR imaging.

Environmentally persistent free radical-containing particulate matter competitively inhibits metabolism by cytochrome P450 1A2.

Combustion processes generate different types of particulate matter (PM) that can have deleterious effects on the pulmonary and cardiovascular systems. Environmentally persistent free radicals (EPFRs) represent a type of particulate matter that is generated after combustion of environmental wastes in the presence of redox-active metals and aromatic hydrocarbons. Cytochromes P450 (P450/CYP) are membrane-bound enzymes that are essential for the phase I metabolism of most lipophilic xenobiotics. The EPFR formed by chemisorption of 2-monochlorophenol to silica containing 5% copper oxide (MCP230) has been shown to generally inhibit the activities of different forms of P450s without affecting those of cytochrome P450 reductase and heme oxygenase-1. The mechanism of inhibition of rat liver microsomal CYP2D2 and purified rabbit CYP2B4 by MCP230 has been shown previously to be noncompetitive with respect to substrate. In this study, MCP230 was shown to competitively inhibit metabolism of 7-benzyl-4-trifluoromethylcoumarin and 7-ethoxyresorufin by the purified, reconstituted rabbit CYP1A2. MCP230 is at least 5- and 50-fold more potent as an inhibitor of CYP1A2 than silica containing 5% copper oxide and silica, respectively. Thus, even though PM generally inhibit multiple forms of P450, PM interacts differently with the forms of P450 resulting in different mechanisms of inhibition. P450s function as oligomeric complexes within the membrane. We also determined the mechanism by which PM inhibited metabolism by the mixed CYP1A2-CYP2B4 complex and found that the mechanism was purely competitive suggesting that the CYP2B4 is dramatically inhibited when bound to CYP1A2.

Enhanced fluorescence detection of miRNA-16 on a photonic crystal.

We report a novel sensing method for fluorescence-labelled microRNAs (miRNAs) spotted on an all-dielectric photonic structure. Such a photonic structure provides an enhanced excitation and a directional beaming of the emitted fluorescence, resulting in a significant improvement of the overall signal collected. As a result, the Limit of Detection (LoD) is demonstrated to decrease by a factor of about 50. A compact read-out system allows a wide-field imaging-based detection, with little or no optical alignment issues, which makes this approach particularly interesting for further development for example in microarray-type bioassays.

In-plane 2D focusing of surface waves by ultrathin refractive structures.

In an attempt to provide a fully dielectric platform for two-dimensional optical circuitry, we report on the focusing features of an ultrathin polymeric lens fabricated on a planar multilayer. The radiation coupled to surface modes sustained by the multilayer can be focused or waveguide-injected into linear ridges by exploiting a dielectric-loading mechanism successfully exploited for plasmons. The low losses of this photonic system also allow long propagation lengths in the visible spectral range. Experimental observations made by fluorescence imaging of the multilayer surface are well supported by computational data obtained through an effective index approach.

Contrast-enhanced ultrasonography in the diagnosis of upper urinary tract urothelial cell carcinoma: a preliminary study.

PURPOSE: The main objective was to assess the effectiveness of contrast-enhanced ultrasonography (CEUS) in the diagnosis of upper urinary tract malignancies by comparing with multidetector computed tomographic urography (MDCTU) and magnetic resonance urography (MRU). Secondary objectives were to compare the tumor size measured with CEUS, MDCTU and MRU and to assess the usefulness of CEUS in distinguishing high-grade tumors from low-grade ones. MATERIALS AND METHODS: In connection with this prospective study carried out from January 2009 to September 2011, 18 patients underwent MDCTU or MRU, grayscale ultrasonography (US), color Doppler ultrasonography and CEUS followed by surgery and histological examination of the specimen. Quantitative analysis was performed using perfusion software. Time intensity curves were extracted and the following parameters were considered: wash-in time, time-to-peak, maximum signal intensity and wash-out time. RESULTS: Grayscale US identified 15/18 lesions; color Doppler showed no flow signal in 8 lesions, low color signal in 9 lesions and an intense color signal in 1 lesion; CEUS identified 17/18 lesions with the undetected lesion being the smallest one (1.2 cm) located in the upper pelvicalyceal system. Semi-quantitative analysis produced different data for high-grade and low-grade urothelial cell carcinoma (UCC). All detected upper urinary tract masses were UCCs. MRU, MDCTU and grayscale US overestimated the tumor size, while CEUS was the most accurate. CONCLUSION: CEUS is useful for evaluating upper urinary tract masses as this method permits differentiation between high-grade and low-grade tumors as well as distinction of the tumor from the adjacent structures and accurate mass measurements.

An Integrated Solar Panel with a Triboelectric Nanogenerator Array for Synergistic Harvesting of Raindrop and Solar Energy.

The triboelectric nanogenerator (TENG) is regarded as an effective strategy for harvesting energy from raindrops, and is a complementary solution with solar cells to achieve all-weather energy harvesting and sustainable energy supply. However, due to the irregularity of natural rainfalls in the volume, frequency, density, and location, designing high-efficiency raindrop TENG (R-TENG) arrays faces great challenges. In this work, a highly transparent, large-area, and high-efficiency R-TENG array with rational material choice, electrode structure, and array distribution is developed for efficiently harvesting irregular raindrop energy. The problem of electrical signal cancellation among adjacent raindrops can be fully avoided, as viewed from the high-resolution space-time analyses of high-speed camera and electrical signal characteristics. With the rationally designed electrode instead of multiple complex electrodes, all charges can be exported by the R-TENG array in a simulated irregular raindrop scenario. Moreover, it is demonstrated that the R-TENG possesses higher average power density (40.80 mW m-2 ) than that of the solar cell (37.03 mW m-2 ) in rainy condition. Additionally, a self-powered wireless light-intensity-monitoring system is demonstrated for real-time and all-day weather monitoring. This work provides useful guidance for designing high-efficiency TENG arrays integrated with solar panels for harvesting irregular raindrop energy and solar energy.

Meat production, quality, and oxidative shelf-life of Haemonchus-parasitised and non-parasitised lambs fed incremental levels of sericea lespedeza substituted for lucerne.

The study evaluated the effects of feeding incremental levels of sericea lespedeza (SL; 0, 62.5, 125, 187.5 and 250 g/kg diet) substituted for lucerne on meat production, quality, and oxidative shelf-life of feedlot lambs infected or non-infected with Haemonchus contortus. There were no diet × infection status, and diet × retail display period effects for all the tested parameters (P > 0.05). Relative to the other diets, the 250 g/kg SL diet decreased (P ≤ 0.05) lamb growth performance and carcass yield. The SL diets experienced less (P ≤ 0.05) meat lipid oxidation than the control diet. Worm infection reduced (P ≤ 0.05) carcass yield and income-over-feed-costs without affecting meat quality (P > 0.05). Feeding SL had no effects on meat physicochemical, fatty acid, colour, and protein shelf-life profiles (P > 0.05). Overall, substituting lucerne with SL up to 187.5 g/kg in lamb feedlot diets has no effects on meat production and quality but enhances lipid stability regardless of infection.

Conformable Multifunctional Space Fabric by Metal 3D Printing for Collision Hazard Protection and Self-Powered Monitoring.

The monitoring of space debris assumes paramount significance to ensure the sustainability and security of space activities as well as underground bases in outer space. However, designing a wide range monitoring system with easy fabrication, low power, and high precision remains an urgent challenge under the scarcity of materials and extreme environment conditions of outer space. Here, we designed a one-piece, robust, but flexible, and repairable 3D metal-printed triboelectric nanogenerator (FR-TENG) by incorporating the advantages of standardization and customization of outer space 3D metal printing. Inspired by the structure of hexagonal and pangolin scales, a curved structure is ingeniously applied in the design of 3D printed metal to adapt different curved surfaces while maintaining superior compressive strength, providing excellent flexibility and shape adaptability. Benefiting from the unique structural design, the FR-TENG has a minimum length of 1 cm with a weight of only 3.5 g and the minimum weight resolution detected of 9.6 g, with a response time of 20 ms. Furthermore, a multichannel self-powered collision monitoring system has been developed to monitor minor collisions, providing warnings to determine potential impacts on the space station and bases surfaces. The system may contribute to ensuring the successful completion of space missions and providing a safer space environment for the exploration of extraterrestrial life and the establishment of underground protective bases.

Digital mapping of surface turbulence status and aerodynamic stall on wings of a flying aircraft.

Real-time monitoring of flow turbulence is very difficult but extremely important in fluid dynamics, which plays an important role in flight safety and control. Turbulence can cause airflow to detach at the end of the wings, potentially resulting in the aerodynamic stall of aircraft and causing flight accidents. Here, we developed a lightweight and conformable system on the wing surface of aircraft for stall sensing. Quantitative data about airflow turbulence and the degree of boundary layer separation are provided in situ using conjunct signals provided by both triboelectric and piezoelectric effects. Thus, the system can visualize and directly measure the airflow detaching process on the airfoil, and senses the degree of airflow separation during and after a stall for large aircraft and unmanned aerial vehicles.

Developing Advanced AI Ecosystems to Enhance Diagnosis and Care for Patients with Depression.

Major Depressive Disorder (MDD) has a significant impact on the daily lives of those affected. This concept paper presents a project that aims at addressing MDD challenges through innovative therapy systems. The project consists of two use cases: a multimodal neurofeedback (NFB) therapy and an AI-based virtual therapy assistant (VTA). The multimodal NFB integrates EEG and fNIRS to comprehensively assess brain function. The goal is to develop an open-source NFB toolbox for EEG-fNIRS integration, augmented by the VTA for optimized efficacy. The VTA will be able to collect behavioral data, provide personalized feedback and support MDD patients in their daily lives. This project aims to improve depression treatment by bringing together digital therapy, AI and mobile apps to potentially improve outcomes and accessibility for people living with depression.

Size scaling of mesoporous silica membranes produced by nanosphere mediated laser ablation.

Monodisperse silica nanospheres with sizes ranging from 250 to 725 nm were prepared and assembled into monolayers to produce regularly distributed light hot spots at the surface of oxidized silicon substrates when illuminated by a laser. Single UV nanosecond laser pulses were employed with energies above the local ablation threshold for the silicon dioxide layer, resulting in the direct formation of 2D periodically porous membranes on top of the silicon. The periodicity of the array was driven by the size of the self-assembled nanospheres. While the local field enhancement was strongly dependent on the sphere size due to Mie resonances, the size and morphology of the produced features could be maintained for all tested situations by balancing the change in local fields with the laser pulse energy. This work demonstrates the fabrication of 90 nm thick porous membranes with pore size of about 100 nm and periodicity ranging from 250 to 725 nm.