RESUMO
Metals with nanocrystalline grains have ultrahigh strengths approaching two gigapascals. However, such extreme grain-boundary strengthening results in the loss of almost all tensile ductility, even when the metal has a face-centred-cubic structure-the most ductile of all crystal structures1-3. Here we demonstrate that nanocrystalline nickel-cobalt solid solutions, although still a face-centred-cubic single phase, show tensile strengths of about 2.3 gigapascals with a respectable ductility of about 16 per cent elongation to failure. This unusual combination of tensile strength and ductility is achieved by compositional undulation in a highly concentrated solid solution. The undulation renders the stacking fault energy and the lattice strains spatially varying over length scales in the range of one to ten nanometres, such that the motion of dislocations is thus significantly affected. The motion of dislocations becomes sluggish, promoting their interaction, interlocking and accumulation, despite the severely limited space inside the nanocrystalline grains. As a result, the flow stress is increased, and the dislocation storage is promoted at the same time, which increases the strain hardening and hence the ductility. Meanwhile, the segment detrapping along the dislocation line entails a small activation volume and hence an increased strain-rate sensitivity, which also stabilizes the tensile flow. As such, an undulating landscape resisting dislocation propagation provides a strengthening mechanism that preserves tensile ductility at high flow stresses.
Assuntos
Cobalto , Metais , Cobalto/química , Teste de Materiais , Metais/química , Resistência à TraçãoRESUMO
Hydrogen embrittlement jeopardizes the use of high-strength steels in critical load-bearing applications. However, uncertainty regarding how hydrogen affects dislocation motion, owing to the lack of quantitative experimental evidence, hinders our understanding of hydrogen embrittlement. Here, by studying the well-controlled, cyclic, bow-out motions of individual screw dislocations in α-iron, we find that the critical stress for initiating dislocation motion in a 2 Pa electron-beam-excited H2 atmosphere is 27-43% lower than that in a vacuum environment, proving that hydrogen enhances screw dislocation motion. Moreover, we find that aside from vacuum degassing, cyclic loading and unloading facilitates the de-trapping of hydrogen, allowing the dislocation to regain its hydrogen-free behaviour. These findings at the individual dislocation level can inform hydrogen embrittlement modelling and guide the design of hydrogen-resistant steels.
RESUMO
Atomistic simulations of dislocation mobility reveal that body-centered cubic (BCC) high-entropy alloys (HEAs) are distinctly different from traditional BCC metals. HEAs are concentrated solutions in which composition fluctuation is almost inevitable. The resultant inhomogeneities, while locally promoting kink nucleation on screw dislocations, trap them against propagation with an appreciable energy barrier, replacing kink nucleation as the rate-limiting mechanism. Edge dislocations encounter a similar activated process of nanoscale segment detrapping, with comparable activation barrier. As a result, the mobility of edge dislocations, and hence their contribution to strength, becomes comparable to screw dislocations.
RESUMO
Graphite and other lamellar materials are used as dry lubricants for macroscale metallic sliding components and high-pressure contacts. It has been shown experimentally that monolayer graphene exhibits higher friction than multilayer graphene and graphite, and that this friction increases with continued sliding, but the mechanism behind this remains subject to debate. It has long been conjectured that the true contact area between two rough bodies controls interfacial friction. The true contact area, defined for example by the number of atoms within the range of interatomic forces, is difficult to visualize directly but characterizes the quantity of contact. However, there is emerging evidence that, for a given pair of materials, the quality of the contact can change, and that this can also strongly affect interfacial friction. Recently, it has been found that the frictional behaviour of two-dimensional materials exhibits traits unlike those of conventional bulk materials. This includes the abovementioned finding that for few-layer two-dimensional materials the static friction force gradually strengthens for a few initial atomic periods before reaching a constant value. Such transient behaviour, and the associated enhancement of steady-state friction, diminishes as the number of two-dimensional layers increases, and was observed only when the two-dimensional material was loosely adhering to a substrate. This layer-dependent transient phenomenon has not been captured by any simulations. Here, using atomistic simulations, we reproduce the experimental observations of layer-dependent friction and transient frictional strengthening on graphene. Atomic force analysis reveals that the evolution of static friction is a manifestation of the natural tendency for thinner and less-constrained graphene to re-adjust its configuration as a direct consequence of its greater flexibility. That is, the tip atoms become more strongly pinned, and show greater synchrony in their stick-slip behaviour. While the quantity of atomic-scale contacts (true contact area) evolves, the quality (in this case, the local pinning state of individual atoms and the overall commensurability) also evolves in frictional sliding on graphene. Moreover, the effects can be tuned by pre-wrinkling. The evolving contact quality is critical for explaining the time-dependent friction of configurationally flexible interfaces.
RESUMO
Controlling, and in many cases minimizing, friction is a goal that has long been pursued in history. From the classic Amontons-Coulomb law to the recent nanoscale experiments, the steady-state friction is found to be an inherent property of a sliding interface, which typically cannot be altered on demand. In this work, we show that the friction on a graphene sheet can be tuned reversibly by simple mechanical straining. In particular, by applying a tensile strain (up to 0.60%), we are able to achieve a superlubric state (coefficient of friction nearly 0.001) on a suspended graphene. Our atomistic simulations together with atomically resolved friction images reveal that the in-plane strain effectively modulates the flexibility of graphene. Consequently, the local pinning capability of the contact interface is changed, resulting in the unusual strain-dependent frictional behavior. This work demonstrates that the deformability of atomic-scale structures can provide an additional channel of regulating the friction of contact interfaces involving configurationally flexible materials.
RESUMO
Saline-alkaline stress is one of several major abiotic stresses in crop production. Exogenous spermidine (Spd) can effectively increase tomato saline-alkaline stress resistance by relieving membrane lipid peroxidation damage. However, the mechanism through which exogenous Spd pre-treatment triggers the tomato antioxidant system to resist saline-alkaline stress remains unclear. Whether H2O2 and polyamine oxidase (PAO) are involved in Spd-induced tomato saline-alkaline stress tolerance needs to be determined. Here, we investigated the role of PAO and H2O2 in exogenous Spd-induced tolerance of tomato to saline-alkaline stress. Results showed that Spd application increased the expression and activities of superoxide dismutase (SOD), catalase (CAT), ascorbate peroxidase (APX), glutathione reductase (GR), and the ratio of reduced ascorbate (AsA) and glutathione (GSH) contents under saline-alkaline stress condition. Exogenous Spd treatment triggered endogenous H2O2 levels, SlPAO4 gene expression, as well as PAO activity under normal conditions. Inhibiting endogenous PAO activity by 1,8-diaminooctane (1,8-DO, an inhibitor of polyamine oxidase) significantly reduced H2O2 levels in the later stage. Moreover, inhibiting endogenous PAO or silencing the SlPAO4 gene increased the peroxidation damage of tomato leaves under saline-alkaline stress. These findings indicated that exogenous Spd treatment stimulated SlPAO4 gene expression and increased PAO activity, which mediated the elevation of H2O2 level under normal conditions. Consequently, the downstream antioxidant system was activated to eliminate excessive ROS accumulation and relieve membrane lipid peroxidation damage and growth inhibition under saline-alkaline stress. In conclusion, PAO triggered H2O2-mediated Spd-induced increase in the tolerance of tomato to saline-alkaline stress.
Assuntos
Peróxido de Hidrogênio/metabolismo , Oxirredutases atuantes sobre Doadores de Grupo CH-NH/metabolismo , Solanum lycopersicum/crescimento & desenvolvimento , Espermidina/metabolismo , Diaminas/farmacologia , Solanum lycopersicum/efeitos dos fármacos , Solanum lycopersicum/metabolismo , Estresse Oxidativo , Proteínas de Plantas/metabolismo , Espécies Reativas de Oxigênio/metabolismo , Estresse Salino , Plântula/efeitos dos fármacos , Plântula/crescimento & desenvolvimento , Plântula/metabolismo , Regulação para Cima , Poliamina OxidaseRESUMO
BACKGROUND: Additional epidermal growth factor receptor (EGFR) mutations confer the drug resistance to generations of EGFR targeted tyrosine kinase inhibitor (EGFR-TKI), posing a major challenge to developing effective treatment of lung adenocarcinoma (LUAD). The strategy of combining EGFR-TKI with other synergistic or sensitizing therapeutic agents are considered a promising approach in the era of precision medicine. Moreover, the role and mechanism of SHP2, which is involved in cell proliferation, cytokine production, stemness maintenance and drug resistance, has not been carefully explored in lung adenocarcinoma (LUAD). METHODS: To evaluate the impact of SHP2 on the efficacy of EGFR T790M mutant LUAD cells to Osimertinib, SHP2 inhibition was tested in Osimertinib treated LUAD cells. Cell proliferation and stemness were tested in SHP2 modified LUAD cells. RNA sequencing was performed to explore the mechanism of SHP2 promoted stemness. RESULTS: This study demonstrated that high SHP2 expression level correlates with poor outcome of LUAD patients, and SHP2 expression is enriched in Osimertinib resistant LUAD cells. SHP2 inhibition suppressed the cell proliferation and damaged the stemness of EGFR T790M mutant LUAD. SHP2 facilitates the secretion of CXCL8 cytokine from the EGFR T790M mutant LUAD cells, through a CXCL8-CXCR1/2 positive feedback loop that promotes stemness and tumorigenesis. Our results further show that SHP2 mediates CXCL8-CXCR1/2 feedback loop through ERK-AKT-NFκB and GSK3ß-ß-Catenin signaling in EGFR T790M mutant LUAD cells. CONCLUSIONS: Our data revealed that SHP2 inhibition enhances the anti-cancer effect of Osimertinib in EGFR T790M mutant LUAD by blocking CXCL8-CXCR1/2 loop mediated stemness, which may help provide an alternative therapeutic option to enhance the clinical efficacy of osimertinib in EGFR T790M mutant LUAD patients.
RESUMO
BACKGROUND: Exogenous 5-aminolevulinic acid (ALA) positively regulates plants chlorophyll synthesis and protects them against environmental stresses, although the protection mechanism is not fully clear. Here, we explored the effects of ALA on chlorophyll synthesis in tomato plants, which are sensitive to low temperature. We also examined the roles of the glutathione S-transferase (GSTU43) gene, which is involved in ALA-induced tolerance to oxidation stress and regulation of chlorophyll synthesis under low temperature. RESULTS: Exogenous ALA alleviated low temperature caused chlorophyll synthesis obstacle of uroporphyrinogen III (UROIII) conversion to protoporphyrin IX (Proto IX), and enhanced the production of chlorophyll and its precursors, including endogenous ALA, Proto IX, Mg-protoporphyrin IX (Mg-proto IX), and protochlorophyll (Pchl), under low temperature in tomato leaves. However, ALA did not regulate chlorophyll synthesis at the level of transcription. Notably, ALA up-regulated the GSTU43 gene and protein expression and increased GST activity. Silencing of GSTU43 with virus-induced gene silencing reduced the activities of GST, superoxide dismutase, catalase, ascorbate peroxidase, and glutathione reductase, and increased the membrane lipid peroxidation; while fed with ALA significant increased all these antioxidase activities and antioxidant contents, and alleviated the membrane damage. CONCLUSIONS: ALA triggered GST activity encoded by GSTU43, and increased tomato tolerance to low temperature-induced oxidative stress, perhaps with the assistance of ascorbate- and/or a glutathione-regenerating cycles, and actively regulated the plant redox homeostasis. This latter effect reduced the degree of membrane lipid peroxidation, which was essential for the coordinated synthesis of chlorophyll.
Assuntos
Ácido Aminolevulínico/metabolismo , Clorofila/metabolismo , Genes de Plantas/fisiologia , Glutationa Transferase/metabolismo , Proteínas de Plantas/metabolismo , Solanum lycopersicum/genética , Ácido Aminolevulínico/farmacologia , Resposta ao Choque Frio , Glutationa Transferase/genética , Homeostase/efeitos dos fármacos , Peroxidação de Lipídeos , Solanum lycopersicum/efeitos dos fármacos , Solanum lycopersicum/metabolismo , Solanum lycopersicum/fisiologia , Oxirredução/efeitos dos fármacos , Proteínas de Plantas/genéticaRESUMO
Metal-organic coordination polymers (MOCPs) have been emerging as very attractive nanomaterials due to their tunable nature and diverse applications. Herein, using Tb3+ as the luminescence center, 1,3,5-benzenetricarboxylate (BTC) as building block and Cu2+ as the signal modulator as well as a recognition unit, we propose a novel and effective lanthanide functionalized MOCP (LMOCP) fluorescent sensor (Cu-BTC/Tb) for amyloid ß-peptide (Aß) monomer, a biomarker for Alzheimer disease (AD). Specifically, Cu-BTC/Tb, created by postsynthesis modification strategy under room temperature, is almost nonemissive due to the quenching effect of Cu2+ in the MOCP, exhilaratingly, the presence of Aß1-40 triggered a significant emission enhancement of Cu-BTC/Tb assay due to the high binding affinity of Aß1-40 for Cu2+ and the subsequent suppression of the quenching effect. In the assay, this LMOCP sensor shows high sensitivity with detection limit of 0.3 nM. Due to its capability to eliminate autofluorescence, Cu-BTC/Tb was also applied to the time-gated detection of Aß1-40 in human plasma with promising results. This work presents a novel strategy for the construction of functional luminescent LMOCP for sensitively turn-on fluorescent sensing of Aß1-40. We believe the proposed strategy would inspire the development of various LMOCP-based fluorescent assays or medical imaging platforms for advanced biological implementations.
Assuntos
Peptídeos beta-Amiloides/sangue , Complexos de Coordenação/química , Corantes Fluorescentes/química , Elementos da Série dos Lantanídeos/química , Estruturas Metalorgânicas/química , Polímeros/química , Complexos de Coordenação/síntese química , Fluorescência , Corantes Fluorescentes/síntese química , Voluntários Saudáveis , Humanos , Estruturas Metalorgânicas/síntese química , Estrutura Molecular , Tamanho da Partícula , Polímeros/síntese química , Propriedades de SuperfícieRESUMO
Three thermally activated delayed fluorescence cationic cuprous complexes [Cu(POP) (ECAF)]PF6 (1, POP = bis(2-diphenylphosphinophenyl)ether, ECAF = 9,9-bis(9-ethylcarbazol-3-yl)-4,5-diazafluorene), [Cu(POP) (EHCAF)]PF6 (2, EHCAF = 9,9-bis(9-ethylhexylcarbazol-3-yl)-4,5-diazafluorene), and [Cu(POP) (PCAF)]PF6 (3, PCAF = 9,9-bis(9-phenylcarbazaol-3-yl)-4,5-diazafluorene) with bipolar 4,5-diazafluorene ligand substituted by bis-carbazole have been successfully prepared, and their UV absorption, photoluminescent properties, and electrochemical behaviors were investigated. At room temperature, complexes 1, 2, and 3 exhibit efficient yellowish-green emission with peak maxima of 550, 549, and 556 nm, respectively, and lifetimes of 5.7 µs. In powder states, the quantum yields (ÏPL) of 22.4% for 1, 18.5% for 2, and 20.0% for 3, respectively, are found. These metal phosphors can be vacuum-evaporated and applied in the organic light-emitting diodes (OLEDs) of indium tin oxide/poly(3,4-ethylenedioxy-thiophene):poly(styrenesulfonate) (40 nm)/4,4',4â³-tri(9-carbazoyl)triphenylamine (15 nm)/cuprous complexes (10 wt %): 1,3-bis(9-carbazolyl)benzene (30 nm)/1,3,5-tri[(3-pyridyl)-phen-3-yl]benzene (50 nm)/LiF (0.5 nm)/Al (100 nm). Complex 1-based device D1 achieved a maximum luminance of 11â¯010 cd m-2, a current efficiency of 47.03 cd A-1, and an external quantum efficiency of 14.81%. The high electroluminescence efficiencies of these complexes are assumed to be due to their good thermal stabilities and capture of both singlet and triplet excitons. The research presented here provides a powerful tool toward highly efficient and cheap OLED devices.
RESUMO
Bent Cu-Al-Ni nanopillars (diameters 90-750 nm) show a shape memory effect, SME, for diameters D > 300 nm. The SME and the associated twinning are located in a small deformed section of the nanopillar. Thick nanopillars (D > 300 nm) transform to austenite under heating, including the deformed region. Thin nanopillars (D < 130 nm) do not twin but generate highly disordered sequences of stacking faults in the deformed region. No SME occurs and heating converts only the undeformed regions into austenite. The defect-rich, deformed region remains in the martensite phase even after prolonged heating in the stability field of austenite. A complex mixture of twins and stacking faults was found for diameters 130 nm < D < 300 nm. The size effect of the SME in Cu-Al-Ni nanopillars consists of an approximately linear reduction of the SME between 300 and 130 nm when the SME completely vanishes for smaller diameters.
RESUMO
Resistant starch (RS), a type of dietary fibre, plays an important role in human health; however, the content of RS in most modern processed starchy foods is low. Cereal starch, when structurally manipulated through a modified starch biosynthetic pathway to greatly increase the amylose content, could be an important food source of RS. Transgenic studies have previously revealed the requirement of simultaneous down-regulation of two starch branching enzyme (SBE) II isoforms both located on the long arm of chromosome 2, namely SBEIIa and SBEIIb, to elevate the amylose content in wheat from ~25% to ~75%. The current study revealed close proximity of genes encoding SBEIIa and SBEIIb isoforms in wheat with a genetic distance of 0.5 cM on chromosome 2B. A series of deletion and single nucleotide polymorphism (SNP) loss of function alleles in SBEIIa, SBEIIb or both was isolated from two different wheat populations. A breeding strategy to combine deletions and SNPs generated wheat genotypes with altered expression levels of SBEIIa and SBEIIb, elevating the amylose content to an unprecedented ~85%, with a marked concomitant increase in RS content. Biochemical assays were used to confirm the complete absence in the grain of expression of SBEIIa from all three genomes in combination with the absence of SBEIIb from one of the genomes.
Assuntos
Amilose/biossíntese , Triticum/genética , Alelos , Amilose/genética , Amilose/metabolismo , Cruzamentos Genéticos , Genes de Plantas/genética , Marcadores Genéticos/genética , Plantas Geneticamente Modificadas/genética , Plantas Geneticamente Modificadas/metabolismo , Polimorfismo de Nucleotídeo Único/genética , Triticum/metabolismoRESUMO
Four new inorganic-organic hybrids, namely, (NH4)3H3[AsMo6O21(O2CC6H4NH2)3]·8.5H2O (1), (NH4)16H3[(AsMo6O21)3(O2CCH2CO2)5]·18H2O (2), (NH4)11H[(AsMo6O21)2{O2C(CH2)6CO2}3]·8H2O (3), and (NH4)18H6[(AsMo6O21)4{C6H3(CO2)3}4]·24.5H2O (4), were synthesized by reaction of As2O3 with (NH4)6Mo7O24·4H2O and organic components in aqueous medium. All of the four hybrids feature a common {AsMo6} unit composed of a six-membered MoO6 octahedral ring capped by one {AsO3} trigonal pyramid. Although these hybrids exhibit similar chemical formula, their structures are monomer, dimer (capsule), trimer, and tetramer (cage), respectively, depending upon the nature of carboxylic acids. Also, the assembly processes appear to be highly versatile and sensitive to the inherent nature of carboxylic acids, which direct the assemblies toward construction of POM clusters and participate directly to their stabilization. In addition, successful isolation of these hydrids shows that it would be possible to achieve a variety of structural predesign in this inorganic-organic system by means of a ligand design route based on the interplay between the organic molecules and polyoxometalates (POMs).
RESUMO
The ultrahigh flexibility and elasticity achieved in freestanding single-crystalline ferroelectric oxide membranes have attracted much attention recently. However, for antiferroelectric oxides, the flexibility limit and fundamental mechanism in their freestanding membranes are still not explored clearly. Here, we successfully fabricate freestanding single-crystalline PbZrO3 membranes by a water-soluble sacrificial layer technique. They exhibit good antiferroelectricity and have a commensurate/incommensurate modulated microstructure. Moreover, they also have good shape recoverability when bending with a small radius of curvature (about 2.4 µm for the thickness of 120 nm), corresponding to a bending strain of 2.5%. They could tolerate a maximum bending strain as large as 3.5%, far beyond their bulk counterpart. Our atomistic simulations reveal that this remarkable flexibility originates from the antiferroelectric-ferroelectric phase transition with the aid of polarization rotation. This study not only suggests the mechanism of antiferroelectric oxides to achieve high flexibility but also paves the way for potential applications in flexible electronics.
RESUMO
The chemical system based on [SeMo6O21](4-) polyanion and carboxylate ligand has been investigated. According to the inherent nature of organic groups, a series of selenomolybdates with three architectures have been isolated through rational and deliberate synthetic routes by stereospecific addition of different carboxylic acids. Such an approach is potentially interesting for {SeMo6} cluster, which exhibits a high surface nucleophilicity and is capable of being functionalized by covalently bound carboxylic acids. Investigation of the assemblies reveals that carboxylic acids have good flexibility and conformational freedom, representing the powerful chemical tools to control the polyanion assembly processes.
Assuntos
Modelos Moleculares , Molibdênio/química , Óxidos/química , Polímeros/química , Selênio/química , Compostos Inorgânicos , Conformação Molecular , Compostos Orgânicos , PolieletrólitosRESUMO
The [HPMo6O21](2-) units and carboxylate linkers can be combined to build novel polyanions by a carefully designed complementary system in self-assembly processes depending only on the number of carboxyl groups and the nature of carboxylic acids. Complexes (NH4)5[HPMo6O21(O2CC6H4OH)3]·4H2O (1), (NH4)8H2[(HPMo6O21)2(C2O4)3]·13H2O (2), (NH4)20[(HPMo6O21)4(O2CCH2CO2)6]·17H2O (3), and Cs2(NH4)10[(HPMo6O21)2(HPO3){C6H3(CO2)3}2]·5H2O (4) have been synthesized by a simple one-pot reaction of (NH4)6Mo7O24·4H2O, H3PO3, and carboxylic acid ligands in aqueous solution. Formation of these compounds is critically dependent on the identifying carboxylic acids, which play the important templated role in assembly processes. The stability of these clusters was explored using electrospray ionization mass spectrometry (ESI-MS) and (31)P NMR spectroscopy, and electron paramagnetic resonance (EPR) experiments further demonstrated the result of the interesting photochromic property.
Assuntos
Ácidos Carboxílicos/química , Molibdênio/química , Compostos Organometálicos/química , Ácidos Fosfóricos/química , Ligantes , Modelos Moleculares , Conformação Molecular , Processos FotoquímicosRESUMO
BACKGROUND: To explore the predictive factors of cardiorespiratory abnormality in nonsedated patients at high altitude (HA) during upper gastrointestinal endoscopy (UGIE). METHODS: The pulse and saturated oxygen (SaO2) levels of 993 patients undergoing nonsedated UGIE in Tibet were monitored. Bivariate correlation and logistic regression were used to identify predictive risk factors for hypoxemia. RESULTS: The basal and minimum SaO2 levels during UGIE of the Tibetan group were significantly higher than those of the non-Tibetan group. The minimum SaO2 and maximum pulse in the HA transient residents groups were significantly higher than those in the HA usual residents groups. The incidences of hypoxemia and severe hypoxemia in the Tibetan groups were significantly lower than those of the non-Tibetan groups. Bivariate correlation and logistic regression showed that race, age (≥ 40 years), residence time in HA (<10 years), and basal SaO2 (<89 %) were sufficiently effective to predict hypoxemia. High-risk hypoxemic patients whose residence time in HA was <2 years were more prone to severe hypoxemia. The combination of the four variables showed superior performance in hypoxemia prognosis (AUC-ROC, 0.941; sensitivity, 83.7 %; specificity, 92.5 %) and severe hypoxemia prognosis (AUC-ROC, 0.968; sensitivity, 90.3 %; specificity, 98.0 %). CONCLUSIONS: Race, age, residence time in HA, and basal SaO2 of patients in HA were predictive variables for hypoxemia during UGIE. Non-Tibetan patients with age ≥ 40 years, residence time in HA <10 years, and basal SaO2 <89 % were prone to hypoxemia. Among those groups, patients whose residence time was <2 years were at higher risk for severe hypoxemia.
Assuntos
Altitude , Endoscopia do Sistema Digestório/efeitos adversos , Hipóxia/etiologia , Adulto , Idoso , Idoso de 80 Anos ou mais , Feminino , Humanos , Hipóxia/diagnóstico , Modelos Logísticos , Masculino , Pessoa de Meia-Idade , Oximetria , Pulso Arterial , Curva ROC , Fatores de Risco , TibetRESUMO
The ultralow friction of two-dimensional (2D) materials, commonly referred to as superlubricity, has been associated with Moiré superlattices (MSLs). While MSLs have been shown to play a crucial role in achieving superlubricity, the long-standing challenge of achieving superlubricity in engineering has been attributed to surface roughness, which tends to destroy MSLs. Here, we show via molecular dynamics simulations that MSLs alone are not capable of capturing the friction behavior of a multilayer-graphene-coated substrate where similar MSLs persist in spite of significant changes in friction as the graphene coating thickness increases. To resolve this problem, a deformation coupled contact pattern is constructed to describe the spatial distribution of the atomic contact distance. It is shown that as the graphene thickness increases, the interfacial contact distance is determined by a competition between increased interfacial MSLs interactions and reduced out-of-plane deformation of the surface. A frictional Fourier transform model is further proposed to distinguish between intrinsic and extrinsic contributions to friction, with results showing that thicker graphene coatings exhibit lower intrinsic friction and higher sliding stability. These results shed light on the origin of interfacial superlubricity in 2D materials and may guide related applications in engineering.
RESUMO
Tribological properties depend strongly on environmental conditions such as temperature, humidity, and operation liquid. However, the origin of the liquid effect on friction remains largely unexplored. Herein, taking molybdenum disulfide (MoS2) as a model system, we explored the nanoscale friction of MoS2 in polar (water) and nonpolar (dodecane) liquids through friction force microscopy. The friction force exhibits a similar layer-dependent behavior in liquids as in air; i.e., thinner samples have a larger friction force. Interestingly, friction is significantly influenced by the polarity of the liquid, and it is larger in polar water than in nonpolar dodecane. Atomically resolved friction images together with atomistic simulations reveal that the polarity of the liquid has a substantial effect on friction behavior, where liquid molecule arrangement and hydrogen-bond formation lead to a higher resistance in polar water in comparison to that in nonpolar dodecane. This work provides insights into the friction on two-dimensional layered materials in liquids and holds great promise for future low-friction technologies.
RESUMO
The frictional properties of a uniaxial tensile strained graphene interface are studied using molecular dynamics simulations. A misfit interval statistical method (MISM) is applied to characterize the atomistic misfits at the interface and strain soliton pattern. During sliding along both armchair and zigzag directions, the lateral force depends on the ratio of graphene flake length (L) to strain soliton spacing (Ls) and becomes nearly zero when L is an integer multiple of 3Ls. Furthermore, the strain solitons propagate along the armchair sliding direction dynamically, while fission and fusion are repeatedly evidenced along the zigzag sliding direction. The underlying superlubric mechanism is revealed by a single-atom quasi-static model. The cancellation of lateral force for the contacting atoms exhibits a dynamic balance when sliding along the armchair direction but a quasi-static balance along the zigzag direction. A diagram of flake length with respect to tensile strain (L-ε) is proposed to predict the critical condition for the transition from nonsuperlubricity to superlubricity. Our results provide insights on the design of superlubric devices.