Biohybrid Organic Heterostructure Based on Chlorophyll-Bacteriochlorophyll Aggregates for Ecofriendly Hydrogen Production.

Hydrogen energy is an abundant, clean, sustainable and environmentally friendly renewable energy source. Therefore, the production of hydrogen by photocatalytically splitting water on semiconductors has been considered in recent years as a promising and sustainable strategy for converting solar energy into chemical energy to replace conventional energy sources and to solve the growing problem of environmental pollution and the global energy crisis. However, highly efficient solar-driven photocatalytic hydrogen production remains a huge challenge due to the poor visible light response of available photocatalytic materials and the low efficiency of separation and transfer of photogenerated electron-hole pairs. In the present work, organic heterojunction structures based on bacteriochlorophyll (BChl) and chlorophyll (Chl) molecules were introduced and used for solar-driven photocatalytic hydrogen production from water under visible light. Also, noble metal-free photocatalyst was successfully constructed on Ti3 C2 Tx nanosheets by simple successive deposition of Chl and BChl, which was used for the photocatalytic splitting water to hydrogen evolution reaction (HER). The results show that the optimal BChl@Chl@Ti3 C2 Tx composite has a high HER performance with 114 µmol/h/gcat , which is much higher than the BChl@Ti3 C2 Tx and Chl@Ti3 C2 Tx composites.

Chlorophyll-Based Organic Heterojunction on Ti3 C2 Tx MXene Nanosheets for Efficient Hydrogen Production.

The Z-scheme process is a photoinduced electron-transfer pathway in natural oxygenic photosynthesis involving electron transport from photosystem II (PSII) to photosystem I (PSI). Inspired by the interesting Z-scheme process, herein a photocatalytic hydrogen evolution reaction (HER) employing chlorophyll (Chl) derivatives, Chl-1 and Chl-2, on the surface of Ti3 C2 Tx MXene with two-dimensional accordion-like morphology, forming Chl-1@Chl-2@Ti3 C2 Tx composite, is demonstrated. Due to the frontier molecular orbital energy alignments of Chl-1 and Chl-2, sublayer Chl-1 is a simulation of PSI, whereas upper layer Chl-2 is equivalent to PSII, and the resultant electron transport can take place from Chl-2 to Chl-1. Under the illumination of visible light (>420 nm), the HER performance of Chl-1@Chl-2@Ti3 C2 Tx photocatalyst was found to be as high as 143 µmol h-1 gcat -1 , which was substantially higher than that of photocatalysts of either Chl-1@Ti3 C2 Tx (20 µmol h-1 g-1 ) or Chl-2@Ti3 C2 Tx (15 µmol h-1 g-1 ).

Characteristics and Kinetics of Rosin Pentaerythritol Ester via Oxidation Process under Ultraviolet Irradiation.

A self-designed reaction device was used as a promising equipment to investigate the oxidation characteristics and kinetics of rosin pentaerythritol ester (RPE) under UV irradiation. Photo-oxidation kinetics and the initial quantum yield (Φ) of RPE were calculated. The initial oxidation product of the photo-oxidation reaction-peroxide was analyzed by iodimetry. The peroxide concentration is related to the light intensity (I) and the temperature (T), and the increasing T and I would destabilize the RPE by accelerating peroxide forming. Photo-oxidation of RPE follows the pseudo first-order reaction kinetics. The relationship between activation energy and logarithm of light intensity (ln I) is linear, and it is expressed as Ea = -4.937ln I + 45.565. Φ was calculated by the photo-oxidation kinetics, and the average value of Φ was 7.19% in the light intensity range of 200⁻800 µW cm-2. This research can provide fundamental information for application of RPE, and help obtain a better understanding of the stability of rosin esters.

The effects of Massa Medicata Fermentata on the digestive function and intestinal flora of mice with functional dyspepsia.

Introduction: The purpose of this study was to identify the chemical components of Massa Medicata Fermentata (MMF) in different fermentation methods, analyze its regulatory effects on gastrointestinal propulsion and intestinal flora in mice with food accumulation, and further explore its mechanism of action in the treatment of dyspepsia. Methods: The chemical compositions of three kinds of MMF were identified using the UPLC-Q- Exactive Orbitrap mass spectrometer. A model of spleen deficiency and food accumulation in mice was established. The gastric emptying rate and intestinal propulsion rate were calculated, serum gastrin concentration and cholinesterase activity were measured, and 16S rRNA microbial detection was performed in different groups of mouse feces. Results: The results showed that a total of 95 chemical components were identified from the three MMF extracts, 62 of which were the same, but there were differences in flavonoids and their glycosides, organic acids, and esters. MMF, PFMMF, and commercial MMF could all significantly improve the gastric emptying rate, intestinal propulsion rate, and GAS concentration in the serum of model mice; PFMMF has a better effect, while there was no significant difference in cholinesterase activity among the groups (p > 0.05). The 16S rRNA sequencing results showed that the MMF and PFMMF could increase the content of beneficial bacteria Bacteroidetes and decrease the pathogenic bacteria Verrucomicrobia in the intestines of model mice, while the commercial MMF could not. Discussion: Studies suggest that MMF has a variety of possible mechanisms for improving food accumulation and treating gastrointestinal dyspepsia, which provides reference value for the quality evaluation and clinical application of MMF.

Microstructure and Mechanical Properties of Mg-Al-La-Mn Composites Reinforced by AlN Particles.

The Mg-Al-RE series heat-resistant magnesium alloys are applied in automotive engine and transmission system components due to their high-temperature performance. However, after serving at a high temperature for a long time, the Al11RE3 phase coarsened and even decomposed, while the Mg17Al12 phase grew and dissolved, which limits the service temperature of Mg-Al-RE series heat-resistant magnesium alloys to a maximum of 175 °C. In this study, a new preparation method for in situ AlN particles was presented. The AlN/Mg-4Al-4La-0.3Mn composites were prepared by a master alloy and casting method. The effects of various contents of AlN (0.5-3.0 wt.%) on the microstructure and mechanical properties of the Mg-4Al-4La-0.3Mn (AE44) alloy at room (25 °C) and high temperatures (150-250 °C) were investigated. Microstructure analysis revealed that the inclusion of AlN led to a reduction in both the grain size and second phase size in the AE44 alloy, while also improving the distribution of the second phase. The average grain size, Al11La3 phase, Al2La phase, and Al3La phase of the 2.0 wt.% AlN/AE44 composite were 135.7, 9.6, 1.9, and 12.6 µm, respectively, which were significantly lower than those of the AE44 matrix alloy (179.8, 12.6, 3.3, 17.8 µm). The refinement was attributed to the ability of AlN particles to serve as heterogeneous nucleation cores for α-Mg and, at the same time, impede the growth of the solid-liquid interface, eventually leading to grain refinement. With the increase in the AlN content, the mechanical properties of composites initially exhibited an increase at both room and high temperatures, followed by a subsequent decrease. When the AlN content was 2.0 wt.%, the composite exhibited optimal strength and plasticity matching. At room temperature, the TYS, UTS, and EL values of the 2.0 wt.% Mg-4Al-4La-0.3Mn composite were 96 MPa, 175 MPa, and 7.0%, respectively, which were increased by 26 MPa, 27 MPa, and 0.7% when compared with the base alloy. The TYS of the 2.0 wt.% Mg-4Al-4La-0.3Mn composite at 150 °C, 200 °C, and 250 °C were 17 MPa, 14 MPa, and 22 MPa higher than those of the matrix alloy, respectively. The main strengthening mechanisms were second phase strengthening, load transfer strengthening, and thermal mismatch strengthening. At elevated temperatures, AlN particles effectively pinned the grain boundaries, inhibiting their migration, and hindered dislocation climbing, resulting in excellent mechanical properties of the composites at high temperatures. This study contributes to the advancement of in situ AlN particle preparation methods and the exploration of effects of AlN on the properties and microstructure of Mg-Al-RE alloys at high temperatures (150-250 °C).

The role of spleen radiomics model for predicting prognosis in esophageal squamous cell carcinoma patients receiving definitive radiotherapy.

BACKGROUND: The spleen plays an important role in systemic antitumor immune response, but whether spleen imaging features have predictive effect for prognosis and immune status was unknown. The aim of this study was to investigate computed tomography (CT)-based spleen radiomics to predict the prognosis of patients with esophageal squamous cell carcinoma (ESCC) underwent definitive radiotherapy (dRT) and to try to find its association with systemic immunity. METHODS: This retrospective study included 201 ESCC patients who received dRT. Patients were randomly divided into training (n = 142) and validation (n = 59) groups. The pre- and delta-radiomic features were extracted from enhanced CT images. LASSO-Cox regression was used to select the radiomics signatures most associated with progression-free survival (PFS) and overall survival (OS). Independent prognostic factors were identified by univariate and multivariate Cox analyses. The ROC curve and C-index were used to evaluate the predictive performance. Finally, the correlation between spleen radiomics and immune-related hematological parameters was analyzed by spearman correlation analysis. RESULTS: Independent prognostic factors involved TNM stage, treatment regimen, tumor location, pre- or delta-Rad-score. The AUC of the delta-radiomics combined model was better than other models in the training and validation groups in predicting PFS (0.829 and 0.875, respectively) and OS (0.857 and 0.835, respectively). Furthermore, some spleen delta-radiomic features are significantly correlated with delta-ALC (absolute lymphocyte count) and delta-NLR (neutrophil-to-lymphocyte ratio). CONCLUSIONS: Spleen radiomics is expected to be a useful noninvasive tool for predicting the prognosis and evaluating systemic immune status for ESCC patients underwent dRT.

NIR quantitative model trans-scale calibration from small scale to pilot scale via directed DOSC-SBC algorithm.

In order to solve the problem of inapplicability of NIR quantitative models due to the large difference between the modeling samples and the samples to be tested, Directed DOSC-SBC（DDOSC-SBC）algorithm is proposed in this paper based on Direct Orthogonal Signal Correction combined with Slope/Bias Correction (DOSC-SBC) algorithm. To obtain the suitable spectral matrix transfer parameters for the test set during DDOSC spectral preprocessing, several representative test samples in the test set were selected, then the spectral systematic errors between the modeling set and the test set were corrected with the SBC method in order to realize the trans-scale prediction of the NIR quantitative model. NIR data and the critical quality attributes（CQAs）were detected in the small scale and pilot scale pharmaceutical process of the fluidized bed granulation of dextrin and water extraction of honeysuckle. After the small scale model was calibrated via the directed DOSC-SBC algorithm which was guided by representative pilot scale samples, the small scale model was able to predict the pilot scale test samples more accurately. The NIR quantitative model trans-scale calibration from small scale to pilot scale was also successfully realized with a RPD value higher than 3.5 and RSEP value lower than 10%. DDOSC-SBC algorithm is a successful model trans-scale calibrated method that can be applied to NIR real-time monitoring of CQAs in the preparation process of Chinese herbal medicine.

Dye-sensitized solar cells based on highly catalytic CNTs/Ti3C2Tx MXenes composite counter electrode.

Establishing stable and efficient Pt-free counter electrodes (CEs) is an important challenge for dye-sensitized solar cells (DSSCs). Ti3C2Tx MXene, with its high catalytic activity and conductivity, has gained attention as a CE in DSSCs. The focus of this paper is on the preparation of Ti3C2Tx decorated carbon nanotubes (CNTs) composite electrode materials (CNTs/Ti3C2Tx), and testing their performance as CEs in DSSCs. Through a series of electrochemical tests, a CNTs/Ti3C2Tx CE exhibits good electrocatalytic activity toward iodine-based electrolytes with low charge transfer resistance, which is close to the performance of a Pt CE. The photoelectric conversion efficiency (PCE) of the CNTs/Ti3C2Tx (1.0 wt%) CE-based DSSCs reaches 5.83%, which is much higher than that of the CNTs CE (3.70%), and approximates that of the Pt CE (6.61%). We attribute the improved performance to the synergistic effect of the excellent conductivity and unique two-dimensional chemical structure of Ti3C2Tx MXene. Moreover, the photostability test of continuous light exposure shows that the CNTs/Ti3C2Tx-1.0 wt% (C/T-1.0 wt%) CE exhibits good stability to the electrolyte. Therefore, CNTs/Ti3C2Tx composites can be used as an efficient Pt-free CE for DSSCs in the future.

Squaraine dye/Ti3C2Tx MXene organic-inorganic hybrids for photocatalytic hydrogen evolution.

MXenes, a new family of 2D nanostructured materials, have been widely studied in the field of artificial photosynthesis due to their outstanding physicochemical properties. In this work, a series of 2,4-bis[4-(N,N-dibutylamino)phenyl] squaraine (SQ) derivatives with different number of hydroxyl groups were hybridized with Ti3C2Tx MXene nanosheets, and the organic-inorganic hybrid photocatalysts were applied for water-splitting hydrogen evolution. The mass ratios of SQ@Ti3C2Tx were optimized to 4 wt% for each SQ, and the best hydrogen evolution reaction (HER) rate of 28.6 µmol h-1 g-1 was achieved by SQ-3 with four OH groups. The photocatalytic ability of the hybrid comes from the outstanding light harvesting of SQ dye, sufficient active sites of Ti3C2Tx, and efficient separation and transfer of the photogenerated charges via heterojunction between SQ aggregates and Ti3C2Tx. This work firstly demonstrates an example of SQ sensitizer combined with MXene for hydrogen generation, which provides a new insight to further explore the MXene-based hybrid nanomaterials for water splitting hydrogen evolution.

Thermal stability of levopimaric acid and its oxidation products.

Biofuels are renewable alternatives to fossil fuels. Levopimaric acid‒base biofuels have attracted increasing attention. However, their stability remains a critical issue in practice. Thus, there is a strong impetus to evaluate the thermal stability of levopimaric acid. Through thermogravimetry (TG) and a custom-designed mini closed pressure vessel test (MCPVT) operating under isothermal and stepped temperature conditions, we investigated thermal oxidation characteristics of levopimaric acid under oxygen atmosphere. Thin-layer chromatography (TLC) and iodimetry were used to measure the hydrogen peroxides generated by levopimaric acid oxidation. A high pressure differential scanning calorimeter (HPDSC) was used to assess hydroperoxide thermal decomposition characteristics. Gas chromatography-mass spectrometry (GC-MS) was used to characterize the oxidation products. The thermal decomposition kinetics of levopimaric acid were thus elucidated, and a high peroxide value was detected in the levopimaric acid. The decomposition heat (QDSC) and exothermic onset temperature (Tonset) of hydroperoxides were 338.75 J g-1 and 375.37 K, respectively. Finally, levopimaric acid underwent a second-stage oxidation process at its melt point (423.15 K), resulting in complex oxidation products. Thermal oxidation of levopimaric acid could yield potential thermal hazards, indicating that antioxidants must be added during levopimaric acid application to protect against such hazardous effects.

Photomultiplication Behavior of Chlorophyll-Based Photodetector under Biased Voltage.

In this study, we fabricated a photodetector (PD) with two types of chlorophyll derivatives, namely, zinc methyl 3-devinyl-3-hydroxymethyl-pyropheophorbide-a (ZnChl) and methyl 131-deoxo-131-dicyanomethylene-pyropheophorbide-a (H2Chl'), via a two-step drop-coating process. In the absorption range of ZnChl/H2Chl' films, the maximum external quantum efficiency of ZnChl/H2Chl'-based devices reached 1363% at -8 V and 1345% at 2.5 V, exhibiting the photomultiplication (PM) phenomenon. The PM phenomenon of ZnChl/H2Chl'-based devices is attributed to hole tunneling injection from the external circuit assisted by electron accumulation in the ZnChl and H2Chl' under light illumination. Through the investigation of the responsivity (R) of ZnChl/H2Chl'-based devices, it has been found that achieving a high R is easier under forward bias compared with reverse bias (7706 mA/W at -8 V and 7629 mA/W at 2.5 V). The organic PDs based on ZnChl/H2Chl' exhibit PM behavior, offering a promising approach to improve the device's responsivity.

Structural characterization of chia seed polysaccharides and evaluation of its immunomodulatory and antioxidant activities.

This study aims to extract an active heteropolysaccharide Chia seed polysaccharide (CSP-A) and further purified by DEAE Sepharose Fast Flow and Sepharose CL-6B chromatographic column, characterize its structure, and evaluate its antioxidant and immunomodulatory activities. Structural analysis revealed that CSP-A was composed of d-mannose, d-glucuronic acid and d-xylose in a molar ratio of 1:3:4 with molecular weight of 1.688 × 105 Da, owning 4 sugar residues of ß-d-Manp-(1→, →4)-α-d-GlcpA-(1→, →2,4)-ß-d-Xylp-(1→, and â†’ 4)-ß-d-Manp-(1 â†’. Congo red assay and microscopic characteristics showed that CSP-A in its solution may possess a helical conformation. In vitro experiments showed that CSP-A had moderate DPPH· and OH· scavenging activities. CSP-A also enhanced the phagocytosis ability of RAW 264.7 cells and prompted the release of NO, TNF-α, IL-6 and IL-1ß from RAW 264.7 cells, which indicated CSP-A had immune regulation effect. This experiment provides scientific basis for further utilization and development of chia seeds, a kind of functional food.

Efficient photocatalytic hydrogen production by bacteriochlorophyll-a derivatives with different esterifying side chains.

Ti3C2Tx MXene, a new family of 2D materials, has been successfully used as an ideal co-catalyst for enhancing photocatalytic activity due to its excellent physicochemical properties. Bacteriochlorophyll (BChl), one of the most abundant photosynthetically active pigments, has been studied in the field of artificial photosynthesis due to its constant and efficient absorption of solar energy and conversion of the excitation energy into chemical energy. In this work, five BChl-a derivatives with a range of different side chain groups in the C17 substituent were prepared and deposited on the Ti3C2Tx MXene surface by a solvent evaporation process to form BChl-n@Ti3C2Tx (n = 1∼5) composite photocatalysts, which were used for the visible light-driven photocatalytic hydrogen evolution reaction (HER) in an aqueous solution. Among the five BChls investigated, BChl-5 possessing a quaternary ammonium terminal showed the best performance and BChl-5@Ti3C2Tx composite exhibited an excellent hydrogen production activity of as high as 51 µmol/h/gcat. This is primarily attributed to the excellent photophysical and photochemical properties provided by the self-aggregation of BChl-5 in the BChl-5@Ti3C2Tx composite and the outstanding charge transport capability of the 2D Ti3C2Tx MXene. At the same time, the fast carrier separation and transfer capability between BChl-5 and Ti3C2Tx provides reliable charge transport for photocatalytic HER.

Preparation and Characterization of In Situ (TiC-TiB2)/Al-Cu-Mg-Si Composites with High Strength and Wear Resistance.

This study involved the preparation and characterization of in situ (TiC-TiB2)/Al-4.7Cu-0.32Mg-0.44Si composites with excellent mechanical and abrasive wear properties. The composites were synthesized in an Al-Ti-B4C system by combining combustion reaction synthesis with hot-pressed sintering and hot extrusion. The in situ TiB2 and TiC particles were of multi-scaled sizes ranging from 20 nm to 1.3 µm. The TiB2 and TiC particles effectively increased the yield strength (σ0.2), ultimate tensile strength (σUTS), hardness (HV), and abrasive wear resistance of the composites. The 40 wt.% (TiC-TiB2)/Al-4.7Cu-0.32Mg-0.44Si composite exhibited the highest σ0.2 (569 MPa), σUTS (704 MPa) and hardness (286 HV), which were 74%, 51% and 110% higher than those of the matrix alloy, respectively. Compared with the matrix alloy, the abrasive wear resistance of the 40 wt.% (TiC-TiB2)/Al-4.7Cu-0.32Mg-0.44Si composite was increased by 4.17 times under an applied load of 5 N and Al2O3 abrasive particle size of 13 µm. Micro-ploughing and micro-cutting were the main abrasive wear mechanisms for the Al-Cu-Mg-Si alloy and the composites.

Characteristics and hazards of the cinnamaldehyde oxidation process.

Pressure and temperature behavior of the cinnamaldehyde oxidation process was determined using a custom-designed mini closed pressure vessel test (MCPVT), which is a new method to investigate the stability and hazard assesment of the cinnamaldehyde oxidation reaction. The oxidation products were analyzed by gas chromatography-mass spectrometry (GC-MS). The results showed that cinnamaldehyde was stable under nitrogen atmosphere but very unstable under oxygen atmosphere. The initial oxidation products were analyzed by iodimetry and the cinnamaldehyde peroxide value could reach 139.44 mmol kg-1 when the oxidation temperature was 308 K. The oxidation kinetics of cinnamaldehyde were studied by using the pressure versus time (P-t) curves obtained from the MCPVT process. The reaction is a second-order reaction, the kinetic equation is ln k = -2233.66 × (1/T) + 11.19, and the activation energy E a is 18.57 kJ mol-1 at 308-338 K. The explosion of the cinnamaldehyde oxidation reaction was observed by MCPVT, in which the onset temperature was 373 K. The main products of cinnamaldehyde oxidation are acetaldehyde, benzaldehyde, phenylacetaldehyde, acetophenone, 2-hydroxyphenyl acetone, cinnamaldehyde epoxide, benzoic acid, and cinnamic acid. Oxidation is a three-step process: (1) cinnamaldehyde reacts with oxygen to form peroxides; (2) complex oxidation reactions are caused by the thermal decomposition of peroxides; (3) rapid oxidation and thermal decomposition lead to explosion hazard.

Helminth infections and risk factor analysis among residents in Eryuan county, Yunnan province, China.

Whilst infections with soil-transmitted helminths are common across China, the public-health significance of Schistosoma japonicum and food-borne helminths is more focalized. Only few studies have investigated the local epidemiology of helminth infections in rural China, including risk factor analysis. We collected stool and blood samples from 3220 individuals, aged 5-88 years, from 35 randomly selected villages in Eryuan county, Yunnan province, China. Stool samples were subjected to the Kato-Katz technique and examined for helminth eggs. Blood samples were tested for Trichinella spp., S. japonicum and cysticerci-specific antibodies. Data on individual and family-level risk factors were collected using questionnaires. The prevalence of Ascaris lumbricoides, Taenia spp., Trichuris trichiura and hookworms was 15.4%, 3.5%, 1.7% and 0.3%, respectively. The seroprevalence of Trichinella spp. was 58.8% and that of cysticercosis 18.5%. The egg positivity rate of S. japonicum in the 13 known endemic villages was 2.7%, and the corresponding seroprevalence was 49.5%. We observed a strong spatial heterogeneity in the families' economic status. S. japonicum infections were more prevalent among the Han than Bai nationality (odds ratio (OR)=3.77, 95% confidence interval (CI)=1.97-7.23) and tobacco growers (OR=3.66, 95% CI=1.77-7.60) and was only found at elevations below 2150 m above sea level. A. lumbricoides and Taenia spp. infections were more prevalent at altitudes above 2150 m when compared to lower settings (OR=1.51, 95% CI=1.24-1.84 and OR=5.32, 95% CI=3.42-8.28, respectively). The opposite was found for T. trichiura (OR=0.31, 95% CI=0.14-0.70). Our findings can guide the design and spatial targeting of control interventions against helminth infections in Eryuan county.

Polymeric micelles with π-π conjugated moiety on glycerol dendrimer as lipophilic segments for anticancer drug delivery.

Polymeric micelles are important nanovehicles for anticancer drug delivery. The lipophilic segment in polymeric micelles is an important factor to affect the drug loading properties. In our previous work, we found that small molecules with π-π conjugated structures could be used to replace hydrophobic polymeric chains as lipophilic segments for anticancer drug delivery. Herein, we report a novel polymeric micelle with π-π conjugated cinnamate moiety on glycerol dendrimer as lipophilic segment, the modified dendritic segment was connected to poly(ethylene glycol) (PEG) via click chemistry. The received amphiphiles self-assembled into micelles in aqueous medium. The properties of the polymeric micelles such as critical micelle concentration (CMC), mean size and morphology were investigated. Anticancer drug doxorubicin (DOX) was loaded in the polymeric micelles. The π-π interaction, drug release profile and in vitro anticancer efficiency of the DOX loaded micelles were studied. The results showed that the micelles with more cinnamate moieties exhibited a lower CMC. The drug loading content and release rate of the micelles increased with increasing generation of glycerol dendrimer. Strong π-π stacking interaction was detected between DOX and carriers. The DOX loaded polymeric micelles exhibited efficient anticancer activity in vitro.

Polymeric micelles with π-π conjugated cinnamic acid as lipophilic moieties for doxorubicin delivery.

In this paper, π-π conjugated cinnamic acid (CIN) was used as a lipophilic moiety to fabricate polymeric micelles. The amphiphiles with one or two cinnamic acid molecules as lipophilic architectures (mPEG-CIN and mPEG-Lys-DCIN) were synthesized. We expressly investigated the effect of the lipophilic parts on size, morphology and stability of the self-assembly micelles. Anticancer drug doxorubicin (DOX) was trapped in the micelles and the interactions between the lipophilic moieties and DOX were studied. The anticancer activity of the DOX-loaded micelles was evaluated both in vitro and in vivo. The results revealed that mPEG-Lys-DCIN micelles exhibited better stability and higher drug loading content. Strong π-π stacking interaction was formed within the DOX-loaded micelles. The DOX released from mPEG-Lys-DCIN micelles was slower than that from mPEG-CIN micelles. DOX-loaded mPEG-Lys-DCIN micelles exhibit higher inhibition efficiency both in vitro and in vivo. Furthermore, the in vivo experimental results demonstrated that the anticancer efficiency of DOX-loaded mPEG-Lys-DCIN micelles was comparable to that of free DOX, meanwhile, the side effect of DOX was reduced greatly after encapsulation. This novel strategy of fabricating polymeric micelles with π-π conjugated small molecules as lipophilic moieties could be serve as a universal prototype for drug delivery.

Anticancer drug delivery of PEG based micelles with small lipophilic moieties.

Herein, we reported a new type of self-assembly micelles based on amphiphilic polymers of cinnamate and coumarin derivatives modified PEG for drug delivery applications. Lipophilic cinnamic acid (CIN) and 7-carboxyl methoxycoumarin (COU) were immobilized on the terminal groups of poly(ethylene glycol) (PEG) to prepare amphiphiles. The amphiphiles self-assembled into micelles. The amphiphiles and micelles were characterized by (1)H NMR, FT-IR, DLS and TEM. Doxorubicin (DOX) was used as a model drug to investigate the lipophilic moieties effects on the drug release behaviors. The DOX loaded micelles were incubated with HepG2 liver cancer cells to study the in vitro anticancer activities. The results showed that DOX could be encapsulated in the micelles efficiently. The mean diameter of the drug loaded micelles was around 100 nm. Drug release profile revealed that the release rate of DOX loaded COU-PEG-COU micelles was significantly slower than that of CIN-PEG-CIN micelles. The DOX loaded micelles could be internalized in HepG2 cells. Both CLSM and flow cytometry results showed that the DOX loaded CIN-PEG-CIN micelles exhibited better anticancer efficacy.

Human angiostrongyliasis outbreak in Dali, China.

BACKGROUND: Several angiostrongyliasis outbreaks have been reported in recent years but the disease continues to be neglected in public health circles. We describe an outbreak in Dali, southwest China in order to highlight some key problems for the control of this helminth infection. METHODOLOGY/PRINCIPAL FINDINGS: All available medical records of suspected angiostrongyliasis patients visiting hospitals in Dali in the period 1 October 2007-31 March 2008 were reviewed, and tentative diagnoses of varying strengths were reached according to given sets of criteria. Snails collected from local markets, restaurants and natural habitats were also screened for the presence of Angiostrongylus cantonensis. A total of 33 patients met criteria for infection, and 11 among them were classified as clinically confirmed. An additional eight patients were identified through a surveillance system put in operation in response to the outbreak. The epidemic lasted for 8 months with its peak in February 2008. Of the 33 patients, 97.0% complained of severe headache. 84.8% patients had high eosinophil cell counts either in the peripheral blood or in cerebrospinal fluid (CSF). Three-quarters of the patients were treated with a combination of albendazole and corticosteroids, resulting in significantly improved overall conditions. Twenty-two patients reported the consumption of raw or undercooked snails prior to the onset of the symptoms, and approximately 1.0% of the Pomacea canaliculata snails on sale were found to be infected with A. cantonensis. The snails were also found in certain habitats around Dali but no parasites were detected in these populations. CONCLUSIONS/SIGNIFICANCE: The import and sale of infected P. canaliculata is the likely trigger for this angiostrongyliasis outbreak. Awareness of angiostrongyliasis must be raised, and standardized diagnosis and treatment are needed in order to provide clinicians with a guide to address this disease. Health education campaigns could limit the risk, and a hospital-based surveillance system should be established in order to detect future outbreaks.