RESUMO
Grain boundaries (GBs), with their diversity in both structure and structural transitions, play an essential role in tailoring the properties of polycrystalline materials1-5. As a unique GB subset, {112} incoherent twin boundaries (ITBs) are ubiquitous in nanotwinned, face-centred cubic materials6-9. Although multiple ITB configurations and transitions have been reported7,10, their transition mechanisms and impacts on mechanical properties remain largely unexplored, especially in regard to covalent materials. Here we report atomic observations of six ITB configurations and structural transitions in diamond at room temperature, showing a dislocation-mediated mechanism different from metallic systems11,12. The dominant ITBs are asymmetric and less mobile, contributing strongly to continuous hardening in nanotwinned diamond13. The potential driving forces of ITB activities are discussed. Our findings shed new light on GB behaviour in diamond and covalent materials, pointing to a new strategy for development of high-performance, nanotwinned materials.
RESUMO
The well known trade-off between hardness and toughness (resistance to fracture) makes simultaneous improvement of both properties challenging, especially in diamond. The hardness of diamond can be increased through nanostructuring strategies1,2, among which the formation of high-density nanoscale twins - crystalline regions related by symmetry - also toughens diamond2. In materials other than diamond, there are several other promising approaches to enhancing toughness in addition to nanotwinning3, such as bio-inspired laminated composite toughening4-7, transformation toughening8 and dual-phase toughening9, but there has been little research into such approaches in diamond. Here we report the structural characterization of a diamond composite hierarchically assembled with coherently interfaced diamond polytypes (different stacking sequences), interwoven nanotwins and interlocked nanograins. The architecture of the composite enhances toughness more than nanotwinning alone, without sacrificing hardness. Single-edge notched beam tests yield a toughness up to five times that of synthetic diamond10, even greater than that of magnesium alloys. When fracture occurs, a crack propagates through diamond nanotwins of the 3C (cubic) polytype along {111} planes, via a zigzag path. As the crack encounters regions of non-3C polytypes, its propagation is diffused into sinuous fractures, with local transformation into 3C diamond near the fracture surfaces. Both processes dissipate strain energy, thereby enhancing toughness. This work could prove useful in making superhard materials and engineering ceramics. By using structural architecture with synergetic effects of hardening and toughening, the trade-off between hardness and toughness may eventually be surmounted.
RESUMO
Grain appearance and nutritional quality are critical traits for rice marketing. However, how to simultaneously improve grain appearance (slender grain and low chalkiness) and nutritional quality (improved protein and amino acid contents) in rice remains a major challenge. Here, we show that knocking out rice isopropylmalate synthase genes OsIPMS1 and OsIPMS2 can improve both grain appearance and nutritional quality. We find that OsIPMS1 directly interacts with OsIPMS2 to form heterodimers. Meanwhile, we observe that OsIPMS1 and OsIPMS2 influence the expression of genes previously reported to be involved in the determination of grain size and nutritional quality in the developing panicles and grains. Furthermore, we show that Osipms1/2 double mutants exhibit significantly improved grain appearance and nutritional quality in polished rice in both the japonica (Wuyungeng 23) and indica (Huanghuazhan) varieties. Our findings indicate that OsIPMS is a useful target gene for breeding of rice varieties appealing for marketing and with health-benefiting properties.
RESUMO
Bioluminescence in beetles has long fascinated biologists, with diverse applications in biotechnology. To date, however, our understanding of its evolutionary origin and functional variation mechanisms remains poor. To address these questions, we obtained high-quality reference genomes of luminous and nonluminous beetles in 6 Elateroidea families. We then reconstructed a robust phylogenetic relationship for all luminous families and related nonluminous families. Comparative genomic analyses and biochemical functional experiments suggested that gene evolution within Elateroidea played a crucial role in the origin of bioluminescence, with multiple parallel origins observed in the luminous beetle families. While most luciferase-like proteins exhibited a conserved nonluminous amino acid pattern (TLA346 to 348) in the luciferin-binding sites, luciferases in the different luminous beetle families showed divergent luminous patterns at these sites (TSA/CCA/CSA/LVA). Comparisons of the structural and enzymatic properties of ancestral, extant, and site-directed mutant luciferases further reinforced the important role of these sites in the trade-off between acyl-CoA synthetase and luciferase activities. Furthermore, the evolution of bioluminescent color demonstrated a tendency toward hypsochromic shifts and variations among the luminous families. Taken together, our results revealed multiple parallel origins of bioluminescence and functional divergence within the beetle bioluminescent system.
Assuntos
Besouros , Animais , Humanos , Besouros/genética , Filogenia , Sequência de Aminoácidos , Luciferases/genética , Luciferases/química , Luciferases/metabolismo , Sítios de LigaçãoRESUMO
Recent developments in mechanical metamaterials exemplify a new paradigm shift called mechanomaterials, in which mechanical forces and designed geometries are proactively deployed to program material properties at multiple scales. Here, we designed shell-based micro-/nanolattices with I-WP (Schoen's I-graph-wrapped package) and Neovius minimal surface topologies. Following the designed topologies, polymeric microlattices were fabricated via projection microstereolithography or two-photon lithography, and pyrolytic carbon nanolattices were created through two-photon lithography and subsequent pyrolysis. The shell thickness of created lattice metamaterials varies over three orders of magnitude from a few hundred nanometers to a few hundred micrometers, covering a wider range of relative densities than most plate-based micro-/nanolattices. In situ compression tests showed that the measured modulus and strength of our shell-based micro-/nanolattices with I-WP topology are superior to those of the optimized plate-based lattices with cubic and octet plate unit cells and truss-based lattices. More strikingly, when the density is larger than 0.53 g cm-3, the strength of shell-based pyrolytic carbon nanolattices with I-WP topology was found to achieve its theoretical limit. In addition, our shell-based carbon nanolattices exhibited an ultrahigh strength of 3.52 GPa, an ultralarge fracture strain of 23%, and an ultrahigh specific strength of 4.42 GPa g-1 cm3, surpassing all previous micro-/nanolattices at comparable densities. These unprecedented properties can be attributed to the designed topologies inducing relatively uniform strain energy distributions and avoiding stress concentrations as well as the nanoscale feature size. Our study demonstrates a mechanomaterial route to design and synthesize micro-/nanoarchitected materials.
Assuntos
Carbono , Fenômenos Mecânicos , Nanoestruturas , Carbono/química , Nanoestruturas/química , Polímeros/químicaRESUMO
Traditional ceramics or metals cannot simultaneously achieve ultrahigh strength and high electrical conductivity. The elemental carbon can form a variety of allotropes with entirely different physical properties, providing versatility for tuning mechanical and electrical properties in a wide range. Here, by precisely controlling the extent of transformation of amorphous carbon into diamond within a narrow temperature-pressure range, we synthesize an in situ composite consisting of ultrafine nanodiamond homogeneously dispersed in disordered multilayer graphene with incoherent interfaces, which demonstrates a Knoop hardness of up to ~53 GPa, a compressive strength of up to ~54 GPa and an electrical conductivity of 670-1,240 S m-1 at room temperature. With atomically resolving interface structures and molecular dynamics simulations, we reveal that amorphous carbon transforms into diamond through a nucleation process via a local rearrangement of carbon atoms and diffusion-driven growth, different from the transformation of graphite into diamond. The complex bonding between the diamond-like and graphite-like components greatly improves the mechanical properties of the composite. This superhard, ultrastrong, conductive elemental carbon composite has comprehensive properties that are superior to those of the known conductive ceramics and C/C composites. The intermediate hybridization state at the interfaces also provides insights into the amorphous-to-crystalline phase transition of carbon.
RESUMO
Carbon materials have received great attention owing to their numerous allotropes and rich properties. Structure design and property tuning of carbon materials is one of the tremendous challenges in the field of materials science research. Here we carried out a bottom-up approach and identified a series of carbon allotropes with similar structures but distinct properties. The structures designed in this work had comparable energy stability to those previously predicted using the top-down global structure search method. Theoretical property calculations demonstrated that the three carbon structures with pure sp3 hybridization possessed semiconductive and superhard properties, while the carbon structure with sp2 + sp3 hybridization exhibited metallic features. Also, they differed significantly in the anisotropy of the mechanical properties. These carbon structures had some match to the unidentified phases in the detonation soot and could hopefully be synthesized by thermal "degassing" of high-pressure Na-C products. Our results propose a strategy to regulate properties through structural tuning, thus paving a way for the design and synthesis of materials with desirable properties.
RESUMO
PURPOSE: The purpose of this study was to establish an animal model capable of simulating the development and decompression process of symptomatic spinal epidural hematoma (SSEH). METHODS: A total of 16 male Bama miniature pigs were included in this study and randomly allocated into four groups: Group A (4 h 20 mmHg hematoma compression), Group B (4 h 24 mmHg hematoma compression), Group C (4 h 28 mmHg hematoma compression), and Group Sham (control). Real-time intra-wound hematoma compression values were obtained using the principle of connectors. Electrophysiological analyses, including the latency and amplitude of somatosensory evoked potentials (SSEP) and motor evoked potentials (MEP), along with behavioral observations (Tarlov score), were performed to assess this model. RESULTS: ANOVA tests demonstrated significant differences in the latency and relative amplitude of SSEP and MEP between Groups C and Sham after 4 h of hematoma compression and one month after surgery (P < 0.01). Behavioral assessments 8 h after surgery indicated that animals subjected to 28 mmHg hematoma compression suffered the most severe spinal cord injury. Pearson correlation coefficient test suggested a negative correlation between the epidural pressure and Tarlov score (r = -0.700, p < 0.001). With the progression of compression and the escalation of epidural pressure, the latency of SSEP and MEP gradually increased, while the relative amplitude gradually decreased. CONCLUSIONS: When the epidural pressure reaches approximately 24 mmHg, the spinal cord function occurs progressive dysfunction. Monitoring epidural pressure would be an effective approach to assist to identify the occurrence of postoperative SSEH.
Assuntos
Modelos Animais de Doenças , Potencial Evocado Motor , Potenciais Somatossensoriais Evocados , Hematoma Epidural Espinal , Animais , Suínos , Masculino , Hematoma Epidural Espinal/cirurgia , Hematoma Epidural Espinal/diagnóstico por imagem , Hematoma Epidural Espinal/fisiopatologia , Potenciais Somatossensoriais Evocados/fisiologia , Potencial Evocado Motor/fisiologia , Porco MiniaturaRESUMO
Bacterial infections pose a significant risk to human health. Magnolol, derived from Magnolia officinalis, exhibits potent antibacterial properties. Synthetic biology offers a promising approach to manufacture such natural compounds. However, the plant-based biosynthesis of magnolol remains obscure, and the lack of identification of critical genes hampers its synthetic production. In this study, we have proposed a one-step conversion of magnolol from chavicol using laccase. After leveraging 20 transcriptomes from diverse parts of M. officinalis, transcripts were assembled, enriching genome annotation. Upon integrating this dataset with current genomic information, we could identify 30 laccase enzymes. From two potential gene clusters associated with magnolol production, highly expressed genes were subjected to functional analysis. In vitro experiments confirmed MoLAC14 as a pivotal enzyme in magnolol synthesis. Improvements in the thermal stability of MoLAC14 were achieved through selective mutations, where E345P, G377P, H347F, E346C, and E346F notably enhanced stability. By conducting alanine scanning, the essential residues in MoLAC14 were identified, and the L532A mutation further boosted magnolol production to an unprecedented level of 148.83 mg/L. Our findings not only elucidated the key enzymes for chavicol to magnolol conversion, but also laid the groundwork for synthetic biology-driven magnolol production, thereby providing valuable insights into M. officinalis biology and comparative plant science.
Assuntos
Compostos Alílicos , Lignanas , Magnolia , Fenóis , Humanos , Magnolia/genética , Magnolia/química , Lacase , Lignanas/química , Compostos de Bifenilo/químicaRESUMO
OBJECTIVE: To explore the short-term outcomes of 3D-printing stand-alone artificial vertebral body (AVB) in the surgical procedure of anterior cervical corpectomy and fusion (ACCF). METHODS: Following the proposal of IDEAL (idea, development, exploration, assessment, and long-term follow-up) framework, we designed and conducted this single-armed, retrospective cohort study. The patients with cervical spondylotic myelopathy were recruited, and these patients exclusively received the surgical procedure of single-level ACCF in our single center. After the process of corpectomy, the size was tailored using different trials and the most suitable stand-alone AVB was then implanted. This AVB was manufactured by the fashion of 3D-printing. Two pairs of screws were inserted in an inclined way into the adjacent vertebral bodies, to stabilize the AVB. The participants were regularly followed-up after the operation. Their clinical data were thoroughly reviewed. We assessed the neurological status according to Japanese Orthopedic Association (JOA) scale. We determined the fusion based on imaging examination six months after the operation. The recorded clinical data were analyzed using specific software and they presented in suitable styles. Paired t test was employed in comparison analysis. RESULTS: In total, there were eleven patients being recruited eventually. The patients were all followed up over six months after the operation. The mean age of the cohort was (57.2±10.2) years. The mean operation time was (76.1±23.1) min and the median bleeding volume was 150 (100, 200) mL. The postoperative course was uneventful for all the cases. Dysphagia, emergent hematoma, and deterioration of neurological function did not occur. Mean JOA scores were 13.2±2.2 before the operation and 16.3±0.8 at the final follow-up, which were significantly different (P < 0.001). The mean recovery rate of neurological function was 85.9%. By comparing the imaging examinations postoperatively and six months after the operation, we found that the average subsidence length was (1.2±1.1) mm, and that there was only one cases (9.1%) of the severe subsidence (>3 mm). We observed significant improvement of cervical lordosis after the operation (P=0.013). All the cases obtained solid fusion. CONCLUSION: 3D-printing stand-alone AVB presented favorable short-term outcome in one-level ACCF in this study. The fusion rate of this zero-profile prosthesis was satisfactory and the complication rate was relatively low.
Assuntos
Doenças da Medula Espinal , Fusão Vertebral , Espondilose , Humanos , Pessoa de Meia-Idade , Idoso , Corpo Vertebral , Estudos Retrospectivos , Resultado do Tratamento , Espondilose/cirurgia , Doenças da Medula Espinal/cirurgia , Impressão Tridimensional , Vértebras Cervicais/cirurgia , Fusão Vertebral/métodosRESUMO
BACKGROUND: Spinal giant cell tumor (SGCT) is a relatively rare primary tumor. En bloc resection is the preferred surgical procedure for it due to its aggressiveness, meanwhile leading to more complications. We reported the characteristics of perioperative complications and local control of total tumor resection including en bloc resection and piecemeal resection for primary thoracic and lumbar spinal giant cell tumors in a single center over 10 years. METHODS: This is a retrospective cross-sectional and cohort study. Forty-one consecutive patients with SGCTs who underwent total tumor resection from 2010 to 2020 at our institution and were followed up for at least 24 months were reviewed. Surgery data, complication characteristics and local tumor control were collected and compared by different surgical procedure. RESULTS: Forty-one patients were included, consisting of 18 males and 23 females, with a mean age of 34.2 years. Thirty-one had thoracic vertebra lesions, and 10 had lumbar vertebra lesions. Thirty-five patients were primary cases, and 6 patients were recurrent cases. Eighteen patients were treated by total en bloc spondylectomy (TES), 12 patients underwent en bloc resection according to WBB surgical system, and 11 patients underwent piecemeal resection. The average surgical time was 498 min, and the mean estimated blood loss was 2145 ml. A total of 58 complications were recorded, and 30 patients (73.2%) had at least one perioperative complication. All patients were followed up after surgery for at least 2 years. A total of 6 cases had postoperative internal fixation failure, and 4 cases presented local tumor recurrence (9.8%). CONCLUSIONS: Although the surgical technique is difficult and accompanied by a high rate of perioperative complications, en bloc resection can achieve favorable local control in SGCT. When it is too difficult to complete en bloc resection, thoroughly piecemeal resection without residual is also acceptable, given the relatively low recurrence rate.
Assuntos
Tumores de Células Gigantes , Neoplasias da Coluna Vertebral , Masculino , Feminino , Humanos , Adulto , Estudos de Coortes , Estudos Retrospectivos , Estudos Transversais , Prognóstico , Resultado do Tratamento , Tumores de Células Gigantes/diagnóstico por imagem , Tumores de Células Gigantes/cirurgia , Recidiva Local de Neoplasia/cirurgia , Vértebras Lombares/diagnóstico por imagem , Vértebras Lombares/cirurgia , Vértebras Lombares/patologia , Neoplasias da Coluna Vertebral/diagnóstico por imagem , Neoplasias da Coluna Vertebral/cirurgia , Neoplasias da Coluna Vertebral/patologiaRESUMO
PURPOSE: This study aimed to establish an animal model in which we can precisely displace the spinal cord and therefore mimic the chronic spinal compression of cervical spondylotic myelopathy. METHODS: In vivo intervertebral compression devices (IVCDs) connected with subcutaneous control modules (SCCMs) were implanted into the C2-3 intervertebral disk spaces of sheep and connected by Bluetooth to an in vitro control system. Sixteen sheep were divided into four groups: (Group A) control; (Group B) 10-week progressive compression, then held; (Group C) 20-week progressive compression, then held; and (Group D) 20-week progressive compression, then decompression. Electrophysiological analysis (latency and amplitude of the N1-P1-N2 wave in somatosensory evoked potentials, SEP), behavioral changes (Tarlov score), imaging test (encroachment ratio (ER) of intraspinal invasion determined by X-ray and CT scan), and histological examinations (hematoxylin and eosin, Nissl, and TUNEL staining) were performed to assess the efficacy of our model. RESULTS: Tarlov scores gradually decreased as compression increased with time and partially recovered after decompression. The Pearson correlation coefficient between ER and time was r = 0.993 (p < 0.001) in Group B at 10 weeks and Groups C and D at 20 weeks. And ER was negatively correlated with the Tarlov score (r = -0.878, p < 0.001). As compression progressed, the SEP latency was significantly extended (p < 0.001), and the amplitude significantly decreased (p < 0.001), while they were both partially restored after decompression. The number of abnormal motor neurons and TUNEL-positive cells increased significantly (p < 0.001) with compression. CONCLUSION: Our implantable and wireless intervertebral compression model demonstrated outstanding controllability and reproducibility in simulating chronic cervical spinal cord compression in animals.
Assuntos
Compressão da Medula Espinal , Doenças da Medula Espinal , Osteofitose Vertebral , Animais , Vértebras Cervicais/diagnóstico por imagem , Vértebras Cervicais/patologia , Vértebras Cervicais/cirurgia , Potenciais Somatossensoriais Evocados/fisiologia , Humanos , Reprodutibilidade dos Testes , Ovinos , Compressão da Medula Espinal/etiologia , Compressão da Medula Espinal/patologia , Compressão da Medula Espinal/cirurgia , Doenças da Medula Espinal/patologiaRESUMO
BACKGROUND: Dysplastic spondylolisthesis is a rare spinal deformity that occurs mainly in young patients. Although its sagittal parameters had been well stated, coronal abnormalities in these patients were poorly studied. The purposes of this study were: (1) to investigate the prevalence of scoliosis in dysplastic spondylolisthesis;(2) to assess scoliosis resolution or persistence after surgery; and (3) to propose a modified classification of scoliosis associated with dysplastic spondylolisthesis. METHODS: Fifty patients (average age 14.9 ± 5.6 years) diagnosed with dysplastic spondylolisthesis who underwent surgical treatment were followed up and their data were analyzed. Standing posteroanterior and lateral full spine radiographs were used to measure the coronal and sagittal parameters. Patients with scoliosis, which was defined as a coronal Cobb angle greater than 10°, were divided into three groups according to their curve characteristics: "independent" scoliosis (IS) group, spasm scoliosis (SS) group, and olisthetic scoliosis (OS) group. SS and OS were spondylolisthesis-induced scoliosis. The radiographic parameters and patient-reported outcomes were collected before and after surgery and compared between groups. RESULTS: The average slip percentage was 62.8% ± 23.1% and the average follow-up time was 51.5 ± 36.4 months (range 3-168 months). Twenty-eight of the 50 (56%) dysplastic spondylolisthesis patients showed scoliosis, of which 8 were IS (24.7° ± 15.2°), 11 were SS (13.9° ± 3.0°), and 9 were OS (12.9° ± 1.9°). By the last follow-up, no scoliosis resolution was observed in the IS group whereas all SS patients were relieved. Of the nine patients with OS, four (44.4%) had scoliosis resolution after surgery. CONCLUSION: Distinguishing different types of scoliosis in dysplastic spondylolisthesis patients may help surgeons to plan treatment and understand prognosis. For patients with significant scoliosis, whether "independent" or spondylolisthesis-induced, treatment of spondylolisthesis should be performed first and scoliosis should be observed for a period of time and treated according to the corresponding principles.
Assuntos
Escoliose , Fusão Vertebral , Espondilolistese , Adolescente , Adulto , Criança , Humanos , Radiografia , Estudos Retrospectivos , Escoliose/diagnóstico por imagem , Escoliose/epidemiologia , Escoliose/cirurgia , Espondilolistese/complicações , Espondilolistese/diagnóstico por imagem , Espondilolistese/epidemiologia , Inquéritos e Questionários , Resultado do Tratamento , Adulto JovemRESUMO
In the past 5 years, the application of 3D printing technology in the field of spine surgery had obtained enormous and substantial progress. Among which, vertebral skeleton model (including lesion model) printing has been widely used in clinical application due to its relatively simple technology and low cost. It shows practical value and becomes popular as the reference of clinical education, auxiliary diagnosis, communication between doctor and patient, and the planning of surgical approaches as well as the reference of more accurate operation in surgery. On the basis of vertebral skeleton model printing, it can be used to design and make navigation template to guide internal fixation screw, which also obtains some remarkable clinical effects. However, 3D printing technology has a more profound influence on spine surgery. The part with full expectation is undoubtedly the clinical application of 3D printing microporous metal implant and personalized implant as well as the clinical application of 3D printing biological materials in the future.
Assuntos
Fixação Interna de Fraturas , Procedimentos Ortopédicos , Impressão Tridimensional , Coluna Vertebral/cirurgia , HumanosRESUMO
Phosphorus (P) is the essential macro-element supporting rice productivity. Quantitative trait loci (QTL) underlying related traits at the seedling stage under two different phosphorus levels was investigated in rice using a population of 76 Chromosomal Sequence Substitution Lines (CSSLs) derived from a cross between the maintainer variety XieqingzaoB (P stress tolerant) and the restorer variety Zhonghui9308 (P stress sensitive); the parents of super hybrid rice Xieyou9308. A genetic linkage map with 120 DNA marker loci was constructed. At logarithmic odd (LOD) value of 2.0, a total of seven QTLs were detected for studied traits under two P levels and their relative ratio. The LOD values ranged from 2.00 to 3.32 and explaining 10.82% to 18.46% of phenotypic variation. Three QTLs were detected under low phosphorus (P-), one under normal (Pâº) and three under their relative ratio (P-/Pâº) on the rice chromosomes 3, 5, 6, 8 and 10. No significant QTLs were found for shoot dry weight (SDW) and total dry weight (TDW). The pleiotropic QTLs influencing root number (qRN5) and root dry weight (qRDW5) as novel QTLs under P- level were detected near marker RM3638 on chromosome 5, which considered to directly contributing to phosphorus deficiency tolerance in rice. These QTLs need further analysis, including the fine mapping and cloning, which may use in molecular marker assisted breeding.
Assuntos
Genômica , Oryza/fisiologia , Fósforo/deficiência , Raízes de Plantas/genética , Raízes de Plantas/metabolismo , Plântula/genética , Plântula/metabolismo , Adaptação Biológica , Quimera , Genômica/métodos , Genótipo , Fenótipo , Locos de Características Quantitativas , Característica Quantitativa Herdável , Estresse FisiológicoRESUMO
A monoclinic BC3 phase (denoted M-BC3) has been predicted using first principles calculations. The M-BC3 structure is formed by alternately stacking sequences of metallic BC-layers and insulating C atom layers, thus, the structure exhibits two-dimensional conductivity. Its stability has been confirmed by our calculations of the total energy, elastic constants, and phonon frequencies. The pressure of phase transition from graphite-like BC3 to M-BC3 is calculated to be 9.3 GPa, and the theoretical Vickers hardness of M-BC3 is 43.8 GPa, this value indicates that the compound is a potentially superhard material. By comparing Raman spectral calculations of M-BC3 and previously proposed structures with the experimental data, we speculate that the experimentally synthesized BC3 crystal may simultaneously contain M-BC3 and Pmma-b phases.
RESUMO
Lead-free BiFeO3-BaTiO3 (BF-BT) piezoceramics have sparked considerable interest in recent years due to their high piezoelectric performance and high Curie temperature. In this paper, we show how the addition of highly aligned porosity (between 40 and 60 vol %) improves the piezoelectric performance, sensing, and energy harvesting figures of merit in freeze-cast 0.70BiFeO3-0.30BaTiO3 piezoceramics compared to conventionally processed, nominally dense samples of the same composition. The dense and porous BF-BT ceramics had similar longitudinal piezoelectric coefficients (d33) immediately after poling, yet the dense samples were observed to age faster than those of porous ceramics. After 24 h, for example, the porous samples had significantly higher d33 values ranging from 112 to 124 pC/N, compared to 85 pC/N for the dense samples. Porous samples exhibited 3 and 5 times higher longitudinal piezoelectric voltage coefficient g33 and energy harvesting figure of merit d33g33 than dense samples due to the unexpected increase in d33 and decrease in relative permittivity with porosity. Spontaneous polarization (Ps) and remnant polarization (Pr) decrease as the porosity content increased from 37 to 59 vol %, as expected due to the lower volume of active material; however, normalized polarization values with respect to porosity level showed a slight increase in the porous materials relative to the dense BF-BT. Furthermore, the porous ceramics showed improved temperature-dependent strain-field response compared to the dense. As a result, these porous materials show excellent potential for use in high temperature sensing and harvesting applications.
RESUMO
Chromosome rearrangements may distort 3D chromatin architectures and thus change gene regulation, yet how 3D chromatin structures evolve in insects is largely unknown. Here, we obtain chromosome-level genomes for four butterfly species, Graphium cloanthus, Graphium sarpedon, Graphium eurypylus with 2n = 30, 40, and 60, respectively, and Papilio bianor with 2n = 60. Together with large-scale Hi-C data, we find that inter-chromosome rearrangements very rarely disrupted the pre-existing 3D chromatin structure of ancestral chromosomes. However, some intra-chromosome rearrangements changed 3D chromatin structures compared to the ancestral configuration. We find that new TADs and subTADs have emerged across the rearrangement sites where their adjacent compartments exhibit uniform types. Two intra-chromosome rearrangements altered Rel and lft regulation, potentially contributing to wing patterning differentiation and host plant choice. Notably, butterflies exhibited chromatin loops between Hox gene cluster ANT-C and BX-C, unlike Drosophila. Our CRISPR-Cas9 experiments in butterflies confirm that knocking out the CTCF binding site of the loops in BX-C affected the phenotypes regulated by Antp in ANT-C, resulting in legless larva. Our results reveal evolutionary patterns of insect 3D chromatin structures and provide evidence that 3D chromatin structure changes can play important roles in the evolution of traits.
Assuntos
Borboletas , Cromatina , Evolução Molecular , Genoma de Inseto , Animais , Borboletas/genética , Cromatina/metabolismo , Cromatina/genética , Rearranjo Gênico/genética , Cromossomos de Insetos/genética , Proteínas de Insetos/genética , Proteínas de Insetos/metabolismo , Fator de Ligação a CCCTC/metabolismo , Fator de Ligação a CCCTC/genéticaRESUMO
Introduction: Olivetolic acid (OLA) is a key intermediate in cannabidiol (CBD) synthesis, and cannabinoids are important neuroactive drugs. However, the catalytic activity of olivetolic acid synthase (OLS), the key enzyme involved in OLA biosynthesis, remains low and its catalytic mechanism is unclear. Materials and Methods: In this study, we conducted a scrupulous screening of the pivotal rate-limiting enzyme and analyzed its amino acid sites that are critical to enzyme activity as validated by experiments. Results: Through stringent enzyme screening, we pinpointed a highly active OLS sequence, OLS4. Then, we narrowed down three critical amino acid sites (I258, D198, E196) that significantly influence the OLS activity. Conclusions: Our findings laid the groundwork for the efficient biosynthesis of OLA, and thereby facilitate the biosynthesis of CBD.
RESUMO
Two species of the genus Valleriola Distant, 1904 (Heteroptera: Leptopodomorpha: Leptopodidae: Leptopodinae: Leptopodini) are described as new: Valleriola asiatica sp. nov. from Laos and Hainan Island of China, and Valleriola bui sp. nov. from Laos and Thailand. In addition, Leptopus riparius Hsiao, 1964 is newly recorded for Vietnam, Valleriola javanica Drake & Hottes, 1951 is newly recorded for Laos, and additional records are provided for Leptopus riparius, Valleriola javanica and Valleriola buenoi (Usinger, 1942). Photographs of the dorsal habitus, heads, hemelytra, fore femora, male parameres and live specimens are provided, accompanied by a distribution map for the species of Leptopodini occurring in East and Southeast Asia.