An Effective Strategy To Construct Novel Polyoxometalate-Based Hybrids by Deliberately Controlling Organic Ligand Transformation In Situ.

Deliberately controlling organic ligand transformation in situ has remained a challenge for the construction of polyoxometalate (POM)-based inorganic-organic hybrids. In this work, four POM-based hybrids assembled from an in situ bifurcating organic ligand-[Cu2(DIBA)4](H3PMo12O40)·6H2O (1), [Cu2(DIBA)4](H4SiW12O40)·6H2O (2), [Ag(HDIBA)2](H2PMo12O40)·2H2O (3), [Ag3(HDIBA)2(H2O)][(P2W18O62)1/2]·4H2O (4) (DIBAH = 3,5-di(1H-imidazol-1-yl) benzoic acid)-have been designed and obtained under hydrothermal conditions. Compounds 1 and 2 are isostructural, displaying a three-dimensional (3D) 2-fold interpenetrating framework with two types of channels, and the bigger channels are occupied by Keggin polyoxoanions and crystallization water molecules, but only crystallization water molecules in the smaller ones. Compound 3 displays a 3D supramolecular structure constructed from {Ag(HDIBA)2} segments and PMo12O40(3-) polyoxoanions through hydrogen bonding interactions. Compound 4 shows a 3D 2-fold interpenetrating framework based on (3, 3, 4)-connected network, which is constructed from {Ag3(HDIBA)2}n chains and P2W18O62(6-) polyoxoanions as linkers. The DIBAH ligand was generated in situ from 3,5-di(1H-imidazol-1-yl)benzonitrile by deliberate design, which illustrates that the strategy to construct novel POM-based hybrids by controlling ligand transformation in situ is rational and feasible. In addition, the effects of the central metal and POMs on the structures of the target compounds were discussed. Finally, the electrochemical and photocatalytic properties of compounds 1-4 have been investigated in this paper.

Transcriptome analysis of leaves, roots and flowers of Panax notoginseng identifies genes involved in ginsenoside and alkaloid biosynthesis.

BACKGROUND: Panax notoginseng (Burk.) F.H. Chen is one of the most highly valued medicinal plants in the world. The major bioactive molecules are triterpene saponins, which are also known as ginsenosides. However, its large genome size has hindered the assembly of a draft genome by whole genome sequencing. Hence, genomic and transcriptomic details about P. notoginseng, especially its biosynthetic pathways and gene expression in different parts of the plant, have remained largely unknown until now. RESULTS: In this study, RNA sequencing of three different P. notoginseng tissues was performed using next generation DNA sequencing. After assembling the high quality sequencing reads into 107,340 unigenes, biochemical pathways were predicted and 9,908 unigenes were assigned to 135 KEGG pathways. Among them, 270 unigenes were identified to be involved in triterpene saponin biosynthesis. In addition, 350 and 342 unigenes were predicted to encode cytochrome P450s and glycosyltransferases, respectively, based on the annotation results, some of which encode enzymes responsible for the conversion of the triterpene saponin backbone into different ginsenosides. In particular, one unigene predominantly expressed in the root was annotated as CYP716A53v2, which probably participates in the formation of protopanaxatriol from protopanaxadiol in P. notoginseng. The differential expression of this gene was further confirmed by real-time PCR. CONCLUSIONS: We have established a global transcriptome dataset for P. notoginseng and provided additional genetic information for further genome-wide research and analyses. Candidate genes involved in ginsenoside biosynthesis, including putative cytochrome P450s and glycosyltransferases were obtained. The transcriptomes in different plant tissues also provide invaluable resources for future study of the differences in physiological processes and secondary metabolites in different parts of P. notoginseng.

Systematic Investigation of Reaction-Time Dependence of Three Series of Copper-Lanthanide/Lanthanide Coordination Polymers: Syntheses, Structures, Photoluminescence, and Magnetism.

Three series of copper-lanthanide/lanthanide coordination polymers (CPs) Ln(III) Cu(II) Cu(I) (bct)3 (H2 O)2 [Ln=La (1), Ce (2), Pr (3), Nd (4), Sm (5), Eu (6), Gd (7), Tb (8), Dy (9), Er (10), Yb (11), and Lu (12), H2 bct=2,5-bis(carboxymethylmercapto)-1,3,4-thiadiazole acid], Ln(III) Cu(I) (bct)2 [Ln=Ce (2 a), Pr (3 a), Nd (4 a), Sm (5 a), Eu (6 a), Gd (7 a), Tb (8 a), Dy (9 a), Er (10 a), Yb (11 a), and Lu (12 a)], and Ln(III) 2 (bct)3 (H2 O)5 [Ln=La (1 b), Ce (2 b), Pr (3 b), Nd (4 b), Sm (5 b), Eu (6 b), Gd (7 b), Tb (8 b), and Dy (9 b)] have been successfully constructed under hydrothermal conditions by modulating the reaction time. Structural characterization has revealed that CPs 1-12 possess a unique one-dimensional (1D) strip-shaped structure containing two types of double-helical chains and a double-helical channel. CPs 2 a-12 a show a three-dimensional (3D) framework formed by Cu(I) linking two types of homochiral layers with double-helical channels. CPs 1 b-9 b exhibit a 3D framework with single-helical channels. CPs 6 b and 8 b display visible red and green luminescence of the Eu(III) and Tb(III) ions, respectively, sensitized by the bct ligand, and microsecond-level lifetimes. CP 8 b shows a rare magnetic transition between short-range ferromagnetic ordering at 110 K and long-range ferromagnetic ordering below 10 K. CPs 9 a and 9 b display field-induced single-chain magnet (SCM) and/or single-molecule magnet (SMM) behaviors, with Ueff values of 51.7 and 36.5 K, respectively.

Analysis of Breast Cancer Screening Results and Influencing Factors of Breast Cancer in Guangdong Province from 2017 to 2021.

BACKGROUNDS: Breast cancer screening plays an important role in the early detection, diagnosis and treatment of breast cancer. The aim of this study was to evaluate the screening results and explore the influencing factors of breast cancer detection rate in Guangdong. METHODS: This cross-sectional study was conducted among 2,024,960 women aged 35-64 in Guangdong Province during 2017-2021. The data about breast cancer screening information were collected from the Guangdong maternal and child health information system. Descriptive statistical analysis was used to explain demographic characteristics and results of breast cancer screening. The generalized linear regression model was applied to analyze the related influencing factors of breast cancer detection rate. RESULTS: The estimated detection rate of breast cancer in Guangdong Province is 70.32/105, with an early diagnosis rate of 82.06%. After adjusting covariates, those women with older age (45-55 [OR (95% CI) 2.174 (1.872, 2.526)], 55-65 [OR (95% CI) 2.162 (1.760, 2.657)]), education for high school ([OR (95% CI) 1.491 (1.254, 1.773)]) and older age at first birth ([OR (95% CI) 1.632 (1.445, 1.844)]) were more likely to have higher detection rate of breast cancer. No history of surgery or biopsy ([OR (95% CI) 0.527 (0.387, 0.718)]), no history of breast cancer check ([OR (95% CI) 0.873 (0.774, 0.985)]) and no family history of breast cancer ([OR (95% CI) 0.255 (0.151, 0.432)]) women were more likely to screen negative for breast cancer (P < 0.05). CONCLUSION: The detection rate of breast cancer in screening showed an increasing trend year by year in Guangdong Province. Older age, education for high school and older age at first birth were risk factors for breast cancer detection rate, while no surgery or biopsy history, no family history of breast cancer and no history of breast cancer check were protective factors.

[Evaluation of the diagnostic criteria of gestational metabolic syndrome and analysis of the risk factors].

OBJECTIVES: To investigate gestational multiple metabolic abnormalities aggregation and diagnostic criteria for gestational metabolic syndrome (GMS), and to analyze the risk factors of GMS. METHODS: A cohort study recruiting 309 pregnant women with preeclampsia, 627 pregnant women with gestational diabetes mellitus (GDM) and 1245 normal pregnant women was performed from January 2008 to December 2011 in Guangdong Women and Children's Hospital. Information regarding age, gestational weeks, basic blood pressure, admission blood pressure, height and body mass index(BMI)before pregnancy was recorded. Biochemical indicators including fasting plasma glucose (FPG), fasting insulin (FINS), total cholesterol (TC), triglyceride (TG), high density lipoprotein (HDL-C), low density lipoprotein (LDL-C), free fatty acids (FFA) were tested. GMS was diagnosed with three or all of the following conditions: (1) overweight and/or obesity before pregnancy (BMI ≥ 25 kg/m(2)); (2) hypertension with blood pressure ≥ 140/90 mm Hg (1 mm Hg = 0.133 kPa); (3) hyperglycemia:diagnosed as GDM; (4) dyslipidemia with TG ≥ 3.23 mmol/L. The incidence of GMS of the three groups were calculated and the risk factors were analyzed. RESULTS: (1) The age, gestational weeks, basic blood pressure, admission blood pressure, BMI before pregnancy of women with preeclampsia and women with GDM were significantly different compared to normal women, respectively (P < 0.01). (2) Biochemical indicators of women with preeclampsia were as following: FPG (4.6 ± 1.0) mmol/L, FINS (10.1 ± 5.6) mU/L, TC (6.3 ± 1.6) mmol/L, TG (3.9 ± 1.8) mmol/L, HDL-C (1.4 ± 0.4) mmol/L, LDL-C (3.0 ± 1.0) mmol/L, FFA (0.8 ± 0.4) mmol/L. And those in women with GDM were: FPG (4.7 ± 0.9) mmol/L, FINS (10.2 ± 5.8) mU/L, TC (5.7 ± 1.3) mmol/L, TG (3.2 ± 1.1) mmol/L, HDL-C (1.4 ± 0.4) mmol/L, LDL-C (2.7 ± 0.9) mmol/L, FFA (0.6 ± 0.3) mmol/L. In normal pregnant women they were: FPG (4.3 ± 0.5) mmol/L, FINS (9.0 ± 4.4) mU/L, TC (5.7 ± 1.1) mmol/L, TG (2.8 ± 1.1) mmol/L, HDL-C (1.5 ± 0.4) mmol/L, LDL-C (2.9 ± 0.8) mmol/L, FFA (0.6 ± 0.2) mmol/L. Statistic differences were found in preeclampsia and GDM women compared to normal women respectively (P < 0.01). (3) The prevalence of GMS in preeclampsia group and in GDM group was 26.2% (81/309) and 13.6% (85/627), statistically different from that of the control group (0)(P < 0.01). (4) Compared to normal women, women with preeclampsia had higher risk of developing GMS (OR = 1.62, 95%CI 1.31 - 2.00, P < 0.01). The risk factors were BMI (OR = 1.29, 95%CI 1.13 - 1.47) and TG (OR = 2.49, 95%CI 1.87 - 3.31). Also, women with GDM had higher risk of developing GMS than normal women (OR = 1.27, 95%CI 1.09 - 1.49, P < 0.01), and the risk factors were BMI (OR = 1.13, 95%CI 1.04 - 1.23) and TG (OR = 1.16, 95%CI 1.02 - 1.33). TG was the independent risk factor in both preeclampsia women and GDM women (P < 0.01, P < 0.05). HDL-C seemed to have less importance in identifying GMS (P > 0.05). CONCLUSIONS: According to the GMS diagnostic criteria used in this study, some preeclampsia patients and some GDM women had aggregation of multiple metabolic abnormalities including pre-pregnancy overweight/obesity, hyperglycemia, high blood pressure and dyslipidemia. TG was the independent risk factor for GMS. HDL-C seemed to have less importance in identifying GMS.

[Adsorption Characteristics of Tetracycline by CuFeO2-modified Biochar].

CuFeO2-modified biochars were prepared through co-precipitation and hydrothermal methods, and the composites had high efficiency removal for tetracycline (TC) from water. The CuFeO2-modified biochar with a 2:1 mass ratio of CuFeO2 to BC450 (CuFeO2/BC450=2:1) demonstrated the best adsorption performance. The kinetic process of TC adsorption by CuFeO2/BC450=2:1 was well fitted with the intraparticle diffusion model, suggesting that the adsorption process was controlled by film and pore diffusion. Under the condition of neutral pH and 298 K, the maximum adsorption capacity of the Langmuir model of CuFeO2/BC450=2:1 was 82.8 mg·g-1, which was much greater than that of BC450 (13.7 mg·g-1) and CuFeO2(14.8 mg·g-1). The thermodynamic data suggested that TC sorption onto CuFeO2/BC450=2:1 was a spontaneous and endothermic process. The removal of TC by CuFeO2/BC450=2:1 increased first and then decreased with increasing pH, and the maximum adsorption occurred under the neutral condition. The strong adsorption of TC by CuFeO2/BC450=2:1 could be attributed to better porosity, larger specific surface area, and more active sites (e.g., functional groups and charged surfaces). This work provided an efficient magnetic adsorbent for removing antibiotics.

Dynamic Changes of Fetal-Derived Hypermethylated RASSF1A and Septin 9 Sequences in Maternal Plasma.

DNA methylation has a tissue-specific feature, and placenta has distinct methylation patterns from peripheral blood cells. Although fetal/placental-derived cell free DNA (cfDNA) in the maternal blood has been reported in recent decades, systematic exploration of dynamic changes of the placental epigenetic signatures across gestation is lacking. The primary goal of this study was to characterize prenatal and postnatal methylation levels of placental-sourced RASSF1A and Septin 9 sequences in maternal plasma. Here, we used a quantitative methylation-sensitive PCR (qMS-PCR) assay to check the methylation status of RASSF1A and Septin 9 in placental tissues of pregnant women and plasma samples from non-pregnant individuals. Then, we examined the methylation levels of the two targets in maternal plasma from expectant women at different gestational ages and postdelivery. Hypermethylated RASSF1A and Septin 9 were identified in placental samples but undetectable in peripheral blood of healthy non-pregnant women. Further, hypermethylated RASSF1A sequence was found in all three trimesters of pregnancy except for early gestation (8 weeks). Moreover, methylation scores of the two targets increased as pregnancy progressed. In addition, hypermethylated RASSF1A sequence was detectable in maternal plasma from 12 h (one case) to 24 h postdelivery (three cases) in 18 pregnant women. Our data on the variation of fetal-sourced methylated RASSF1A levels in maternal plasma in relation to gestational age provide a useful basis for improving the reliability of the methylation assay for non-invasive prenatal diagnosis (NIPD) in clinical practice.

Various Anderson-type polyoxometalate-based metal-organic complexes induced by diverse solvents: assembly, structures and selective adsorption for organic dyes.

Six new Anderson-type polyoxometalate (POM)-based metal-organic complexes (MOCs), namely, {HCu(HPCAP)2[CrMo6(OH)6O18]}·2H2O (1), {Zn4(PCAP)2[CrMo6(OH)6O18]2(H2O)12}·4H2O (2), {Zn3(PCAP)2[CrMo6(OH)5O19](H2O)6}·6H2O (3), {Ni3(PCAP)2[NiMo6(OH)5O19](H2O)6}·8H2O (4), {Cu3(PCAP)2[AlMo6(OH)5O19](H2O)6}·6H2O (5), and {Co3(HPCAP)2[AlMo6(OH)6O18](H2O)10}[AlMo6(OH)6O18]·6H2O (6) (HPCAP = 3-(2-pyridinecarboxylic acid amido)pyridine), were constructed from diverse metal ions (CuII/ZnII/NiII/CoII), the HPCAP ligand and various Anderson-type POM anions under hydrothermal and solvothermal conditions and structurally characterized by single-crystal X-ray diffraction, IR spectroscopy, powder X-ray diffraction (PXRD) and thermogravimetric analyses (TGA). Crystal analysis shows that complex 1 has a 3D supramolecular structure based on the CrMo6 anions and the 1D metal-organic ribbon chains [Cu(HPCAP)2] via hydrogen bonds. Complex 2 is a 2D supramolecular layer composed of two kinds of dinuclear metal clusters of [Zn2(CrMo6)2] and [Zn2(PCAP)2]. Complexes 3-5 show similar 3D frameworks. In 3-5, [M1Mo6]3- (M1 = Cr for 3, Ni for 4, and Al for 5) anions are bridged by MII ions (M = Zn for 3, Ni for 4, and Cu for 5) to give a 1D M-M1Mo6 inorganic chain; the adjacent 1D inorganic chains are connected through two directions of [M2(PACP)2] rings to form a 3D framework. It should be noted that in complex 4, the NiMo6 anions are in situ generated from the NiII ion and Mo7O246- anions, which is rarely observed in POM-based MOCs. Complex 6 shows a 1D ladder-like supramolecular double chain, which is composed of 1D Co-AlMo6 inorganic chains, [Co2(HPCAP)2] dual-core rings and discrete AlMo6 polyanions interlinked by hydrogen bonding interactions. These structural diversities show that solvents play key roles in the construction of various architectures. All of the title complexes have excellent adsorption activities for the cationic dyes methylene blue (MB) and gentian violet (GV); in particular, complex 5 is capable of selectively adsorbing MB and GV from the mixtures of MB and MO and GV and MO, respectively. In addition, the electrochemical properties of complexes 1, 4, and 5 are also studied.

Metal/Carboxylate-Induced Versatile Structures of Nine 0D → 3D Complexes with Different Fluorescent and Electrochemical Behaviors.

To investigate the effect of the polycarboxylates and metal ions on the assembly and structures of complexes based on a thiophene-containing bis-pyridyl-bis-amide N,N'-bis(pyridine-3-yl)thiophene-2,5-dicarboxamide (3-bptpa) ligand, nine 0D → 3D complexes of [Ni2(3-bptpa)4(1,2-BDC)2(H2O)2] (1), [Ni(3-bptpa)(IP)(H2O)2]·H2O (2), [Ni(3-bptpa)(5-MIP)(H2O)2]·H2O (3), [Ni(3-bptpa)(5-NIP)(H2O)] (4), [Ni(3-bptpa)(5-AIP)]·2H2O (5), [Ni2(OH)(3-bptpa)(1,3,5-BTC)]·DMA·5H2O (6), [Cu(3-bptpa)(5-MIP)]·3H2O (7), [Cu(3-bptpa)(5-AIP)(H2O)0.25]·H2O (8), and [Cu(3-bptpa)(1,3,5-HBTC)] (9) (1,2-H2BDC = 1,2-benzenedicarboxylic acid, H2IP = 1,3-benzenedicarboxylic acid, 5-H2MIP = 5-methylisophthalic acid, 5-H2NIP = 5-nitroisophthalic acid, 5-H2AIP = 5-aminoisophthalic acid, DMA = N,N'-dimethylacetamide, and 1,3,5-H3BTC = 1,3,5-benzenetricarboxylic acid) have been hydrothermally/solvothermally synthesized and structurally characterized by IR, thermogravimetric, powder X-ray diffraction, and single-crystal X-ray diffraction. Complex 1 is a zero-dimensional (0D) bimetallic complex. Complexes 2 and 3 feature two similar one-dimensional ladderlike structures. Complex 4 displays a two-dimensional (2D) 4-connected network based on single-metallic nodes. Complex 5 shows a 2D double-layer structure containing a pair of 63 [Ni(5-AIP)] honeycomblike sheets. Complex 6 is a 3,5-connected three-dimensional (3D) framework derived from bimetallic nodes and 63 [Ni2(OH)(1,3,5-BTC)] honeycomblike sheets. Complex 7 displays a 2D 4-connected grid based on bimetallic nodes. Complex 8 features a 2D double-layer structure based on two 4-connected [Cu(3-bptpa)(5-AIP)] sheets and bridging coordinated water molecules. Complex 9 is a 2D structure extended by incomplete deprotonation of 1,3,5-HBTC and 3-bptpa linkers. The effect of the metal ions and polycarboxylates on the structures of the title complexes was discussed, and the fluorescent properties of 1-9 were investigated. The carbon paste electrodes bulk-modified by complexes 3, 5, and 6-9 show different electrocatalytic activities for the oxidation of ascorbic acid as well as the reduction of hydrogen peroxide, nitrites, and bromates.

High quality and high performance adsorption of Congo red using as-grown MWCNTs synthesized over a Co-MOF as a catalyst precursor via the CVD method.

A Co(ii) metal-organic framework (MOF) based on the pyridyl-amide-carboxylate-3-(2-pyridinecarboxylic acid)amido pyridine (HPCAP) ligand, namely [Co(PCAP)2]·2H2O (1), has been hydrothermally synthesized and structurally characterized, which was firstly used as a combined catalyst precursor to synthesize multi-walled carbon nanotubes (MWCNTs). The decomposition of ethylene in the presence of the Co-MOF by the chemical vapor deposition (CVD) method at 800 °C led to successful production of high quality as-grown MWCNT products. Interestingly, the as-grown MWCNTs exhibit high performance in the selective adsorption of Congo red (CR) with an adsorption capacity of 1639 mg g-1.

Three novel and various isopolymolybdate-based hybrids built from the carboxyl oxygen atoms of in situ ligands: substituent-tuned assembly, architectures and properties.

By changing the N-donor groups of benzonitrile-based reactants, three novel isopolymolybdate-based compounds, [Cu(DBIBA)3][δ-HMo8O26] (1), [Cu(H2O)(DIBA)(DIBAH)(γ-HMo8O26)]·2H2O (2), and [CuI(DTBA)(Mo2O6)] (3) (HDBIBA = 3,5-di(benzoimidazol-1-yl)benzoic acid, HDIBA = 3,5-di(1H-imidazol-1-yl)benzoic acid and HDTBA = 3,5-di(1,2,4-triazol-1-yl)benzoic acid) were synthesized, in which the benzene carboxylate-based ligands DBIBA, DIBA and DTBA were in situ transformed from the benzonitrile-based ligands under hydrothermal conditions. Selecting benzoimidazol as the N-donor group, compound 1 with a 3D (6, 8)-connected framework is constructed from {Cu3(DBIBA)3} hexagonal ring building units and [δ-Mo8O26]4- polyoxoanions. Replacing the benzoimidazol with the imidazol group, a 3D (3, 4, 6)-connected framework 2 containing two types of {(γ-Mo8O26)(DIBA)2} building blocks was obtained. When the triazol groups are introduced, compound 3 displays a 3D framework, which is constructed from {(Mo4O13)(DTBA)2}n chains bridged by CuI atoms. It is interesting to note that the carboxyl oxygen atoms from the in situ ligands participate in the construction of isopolymolybdates in compounds 2 and 3. In addition, the various N-donor groups of in situ ligands show a great effect on the oxidation state of copper ions, the novel polymolybdate unit and the final architectures of the title compounds. The electrochemical properties and photocatalytic activities of compounds 1-3 were investigated herein.

Solvent-induced Mn(II)/Zn(II)/Co(II) organopolymolybdate compounds constructed by bis-pyridyl-bis-amide ligands through the Mo-N bond: synthesis, structures and properties.

Three transition metal organopolymolybdate hybrid compounds, namely, H2[Mn(H2O)4L3(γ-Mo8O26)] 8H2O (), H[M2(CH3O)(H2O)6L3(γ-Mo8O26)] [M = Zn () and Co ()] [L = 1,4-bis(3-pyridinecarboxamido)benzene] have been synthesized under solvothermal conditions and characterized by IR spectroscopy, TG analysis, powder XRD and single-crystal X-ray diffraction. Compounds were obtained by the one-pot method, and the mixture of methanol and water with different ratios was used as the solvent. In compound , the γ-Mo8 anions were connected with pyridine groups of ligand L by the Mo-N bond, forming an uncommon 1D γ-Mo8-L chain. The adjacent chains were connected by [MnL2(H2O)4](2+) moieties through hydrogen bonding interaction to construct a 2D supramolecular network. Compounds and are isostructural, which show a 3D 2,4,6-connected {4(4)·6(2)}{4(4)·6(6)·8(4)·10}{6} framework. The γ-Mo8 anions were connected by [M(H2O)2(CH3O)](+) [M = Zn () and Co ()] subunits forming 1D M-Mo8 chains, which were connected by [ML2(H2O)4](2+) moieties to construct a 2D layer. In compounds and , there also exist the same 1D γ-Mo8-L chains as in , which extended the 2D networks to 3D frameworks. The Mo-N bond with pyridyl groups was formed under the solvothermal conditions, which is scarcely reported to our knowledge. The effect of the solvent on the assembly of the title compounds and the formation of the Mo-N bond, as well as the role of metal-organic moieties on the construction of diverse organopolymolybdate compounds have been discussed in detail. Furthermore, the electrochemical and photocatalytic properties of have been investigated.

The assembly of thiophene-based bis-pyridyl-bis-amide CoII coordination polymers and their polypyrrole-functionalized hybrid materials for boosting their photocatalytic performances.

Herein, a series of multifunctional CoII coordination polymer (CP) materials, which were based on a new semi-rigid thiophene-containing bis-pyridyl-bis-amide N,N'-bis(pyridine-3-yl)thiophene-2,5-dicarboxamide (3-bptpa) ligand and different polycarboxylates, namely, [Co(3-bptpa)(1,3-BDC)]·2H2O (CP1), [Co(3-bptpa)(5-MIP)]·2H2O (CP2), [Co(3-bptpa)(1,3,5-HBTC)] (CP3), [Co(3-bptpa)(5-NIP)]·2H2O (CP4) and [Co(3-bptpa)(1,3-BDC)]·2H2O (CP5) (1,3-H2BDC = 1,3-benzenedicarboxylic acid, 5-H2MIP = 5-methylisophthalic acid, 1,3,5-H3BTC = 1,3,5-benzenetricarboxylic acid, 5-H2NIP = 5-nitroisophthalic acid) and their polypyrrole (PPy)-functionalized hybrid materials PPy/CPn (n = 1, 2, 3, 4, 5), have been prepared. The CP materials were structurally characterized by single-crystal X-ray diffraction analyses, IR spectra, UV-vis diffuse-reflectance spectra (DRS), powder X-ray diffraction (PXRD) and thermal gravimetric analyses (TG). The structural analyses indicate that CP1-CP4 reveal similar 2D networks. CP5 exhibits a 2-fold interpenetrating 3D α-Po framework. The PPy-functionalized CP1-CP5 hybrid materials PPy/CPn were fabricated by the combination of micro-size CP particles and PPyvia a facile in situ chemical oxidation polymerization process under the initiation of ammonium persulfate (APS). The photocatalytic properties of CP1-CP5 and PPy/CPn hybrid materials have been investigated in detail. As a result, after being decorated with PPy, the photocatalytic properties of the hybrid materials, particularly PPy/CP3, have been observably enhanced for the degradation of methylene blue (MB) under visible light irradiation.

[Adsorption of Cd(II) varies with biochars derived at different pyrolysis temperatures].

Ten biochars were prepared at different pyrolysis temperatures (300- 600 degrees C) using peanut shells and Chinese medicine material residue as raw materials, and were characterized. Adsorption behavior of Cd(II) on these biochars at different solution pHs, sorption times, and Cd(II) concentrations was investigated. The C content, surface area, and aromaticity of the biochars increased with increasing pyrolysis temperature, while the amount of oxygen-containing functional groups decreased. In addition, the content of inorganic minerals (e. g., Ca/Mg carbonate or phosphate) was enriched, but their solubility was reduced with increasing pyrolysis temperature. As the solution pHs increased from 2.0 to 6.0, the amount of Cd(II) adsorbed on the biochars gradually increased, and achieved the maximum at pH 6.0. Adsorption processes could be divided into two stages: fast and slow sorption. The rate of Cd(II) adsorption on these biochars was regulated by film and intraparticle diffusion, precipitation and ion exchange. With increasing temperature, the percentage of fast sorption to overall sorption of Cd(II) gradually decreased. Sharp decrease of oxygen-containing functional groups and formation of insoluble crystalline minerals reduced the rate of fast sorption on the high-temperature biochars (> 500 degrees C). For low-temperature biochars (≤ 400 degrees C), precipitation and ion exchange were the dominant sorption mechanisms. For high-temperature biochars (≥ 500 degrees C), more integrated π-conjugated aromatic structures enhanced the contribution of Cd-π interaction to the overall sorption, but the formation of phosphate and carbonate minerals probably weakened the sorption. These results will provide important information on screening biochars as engineered adsorbents to remove or immobilize Cd(II) in contaminated water and soil.

The various architectures and properties of a series of coordination polymers tuned by the central metals.

Five new metal-organic coordination polymers based on the mixed ligands of a semi-rigid bis-pyridyl-bis-amide N,N'-bis(3-pyridinecarboxamide)-1,2-cyclohexane (3-bpah) and 1,4-benzenedicarboxylic acid (1,4-H2BDC), namely [Co(3-bpah)(1,4-BDC)(H2O)3] (1), [Ni(3-bpah)(1,4-BDC)(H2O)3] (2), [Cu(3-bpah)(1,4-BDC)] (3), [Zn(3-bpah)(1,4-BDC)]·H2O (4) and [Cd(3-bpah)(1,4-BDC)(H2O)] (5), have been hydrothermally synthesized and structurally characterized. Complexes 1 and 2 are isostructural and display the similar 1D infinite chains, which are further linked via hydrogen-bonding interactions to generate 3D supramolecular frameworks. Complex 3 features a 3D polymeric framework with CdSO4-like topology. Complexes 4 and 5 show two similar 2D (2,4)-connected networks with (4·8(5))(4) topology, in which the 3-bpah ligands adopt different µ2-bridging coordination modes via the ligation of two pyridyl nitrogen atoms in 4 and via the ligation of one pyridyl nitrogen and one amide oxygen atom in 5. In addition, the central metals show different coordination geometries in 4 and 5. The adjacent layers of complexes 4 and 5 are finally extended into 3D supramolecular architectures through hydrogen-bonding interactions. The effects of the central metals on the structures and properties of complexes 1-5 have been discussed. The electrochemical properties of complexes 1-3 and fluorescent sensing behaviors of 4-5 toward ethanol and nitrobenzene have been investigated in detail.

The complex jujube genome provides insights into fruit tree biology.

The jujube (Ziziphus jujuba Mill.), a member of family Rhamnaceae, is a major dry fruit and a traditional herbal medicine for more than one billion people. Here we present a high-quality sequence for the complex jujube genome, the first genome sequence of Rhamnaceae, using an integrated strategy. The final assembly spans 437.65 Mb (98.6% of the estimated) with 321.45 Mb anchored to the 12 pseudo-chromosomes and contains 32,808 genes. The jujube genome has undergone frequent inter-chromosome fusions and segmental duplications, but no recent whole-genome duplication. Further analyses of the jujube-specific genes and transcriptome data from 15 tissues reveal the molecular mechanisms underlying some specific properties of the jujube. Its high vitamin C content can be attributed to a unique high level expression of genes involved in both biosynthesis and regeneration. Our study provides insights into jujube-specific biology and valuable genomic resources for the improvement of Rhamnaceae plants and other fruit trees.

Assembly and properties of transition-metal coordination polymers based on semi-rigid bis-pyridyl-bis-amide ligand: effect of polycarboxylates on the dimensionality.

Seven new coordination polymers, [Co(3-bpcd)(1,3-BDC)(H(2)O)(3)]·H(2)O (1), [Co(3-bpcd)(1,2-BDC)(H(2)O)]·H(2)O (2), [Co(3)(3-bpcd)(1,2,4-BTC)(2)(H(2)O)(4)]·4H(2)O (3), [Co(3-bpcd)(NPH)]·2H(2)O (4), [Cu(3-bpcd)(1,3-BDC)] (5), [Cu(3-bpcd)(1,2-BDC)] (6), [Cu(3-bpcd)(1,3,5-HBTC)(H(2)O)](2)·2H(2)O (7) (3-bpcd = N,N'-bis(pyridin-3-yl)cyclohexane-1,4-dicarboxamide, 1,3-H(2)BDC = 1,3-benzenedicarboxylic acid, 1,2-H(2)BDC = 1,2-benzenedicarboxylic acid, 1,2,4-H(3)BTC = 1,2,4-benzenetricarboxylic acid, H(2)NPH = 3-nitrophthalic acid and 1,3,5-H(3)BTC = 1,3,5-benzenetricarboxylic acid) have been hydrothermally synthesized by assembling transition-metal cobalt-copper salts with semi-rigid bis-pyridyl-bis-amide ligand 3-bpcd and different aromatic polycarboxylic acids. Complex 1 exhibits a one-dimensional (1D) sinusoidal-like chain, which is further assembled into a three-dimensional (3D) supramolecular framework through hydrogen-bonding interactions. Complex possesses a 3D framework with 4-connected 6(6) topology, which contains a two-dimensional (2D) distorted asymmetric hexagonal grid. When 1,2,4-BTC is used in complex , a 3D framework with (6(3)·8(2)·10)(2)(6(5)·8)(2)(8) topology is constructed. Complex 2 possesses a 3D framework with 4-connected 6(6) topology, which contains a two-dimensional (2D) distorted asymmetric hexagonal grid. When 1,2,4-BTC is used in complex 3, a 3D framework with (6(3)·8(2)·10)(2)(6(5)·8)(2)(8) topology is constructed. Complex 4 possesses a 3D framework with 4-connected 6(6) topology, which is similar to that of 2 except for containing a 2D symmetric hexagonal grid. When Co(II) ion is replaced by Cu(II) ion, the 3D framework of complex 5 with (4·6(2))(4·6(6)·8(3)) topology based on 3-bpcd and 1,3-BDC ligands is obtained. Complex 6 shows a 2D cross network consisting of a superposed Cu-3-bpcd 1D chain and 1,2-BDC, which is further expanded into a 3D supramolecular framework by hydrogen-bonding interactions. In complex 7, 1,3,5-HBTC is employed as the auxiliary ligand, and a 3D supramolecular framework based on the undulated 2D layers is formed through π-π stacking and hydrogen-bonding interactions. Both the metal ions and polycarboxylates play important roles in the construction of the title complexes. In addition, the electrochemical behaviors and the fluorescence properties of the seven complexes have been investigated.

[Microbial flora in Cerasus sachalinensis rhizosphere].

By using selected culture media, the microbes in Cerasus sachalinensis rhizosphere were isolated, identified and classified, with their community structure and dynamic changes at different growth stages of C. sachalinensis studied. The bacteria isolated were belonged to 15 genera, among which, Bacillus, Pseudomonas and Flavobacterium were the dominant ones. Flavus and Albosporus were the two dominant genera in seven groups of Actinomyces, and Mucor, Aspergillus and Penicillium were the main genera of fungi. The microbial flora varied with C. sachalinensis growth stage, being the richest at defoliation stage and the least at budding stage.