Reversible CO2 Capture and On-Demand Release by an Acidity-Matched Organic Photoswitch.

Separation of carbon dioxide (CO2) from point sources or directly from the atmosphere can contribute crucially to climate change mitigation plans in the coming decades. A fundamental practical limitation for the current strategies is the considerable energy cost required to regenerate the sorbent and release the captured CO2 for storage or utilization. A directly photochemically driven system that demonstrates efficient passive capture and on-demand CO2 release triggered by sunlight as the sole external stimulus would provide an attractive alternative. However, little is known about the thermodynamic requirements for such a process or mechanisms for modulating the stability of CO2-derived dissolved species by using photoinduced metastable states. Here, we show that an organic photoswitchable molecule of precisely tuned effective acidity can repeatedly capture and release a near-stoichiometric quantity of CO2 according to dark-light cycles. The CO2-derived species rests as a solvent-separated ion pair, and key aspects of its excited-state dynamics that regulate the photorelease efficiency are characterized by transient absorption spectroscopy. The thermodynamic and kinetic concepts established herein will serve as guiding principles for the development of viable solar-powered negative emission technologies.

Temporal and Spatial Patterns of Inflammation and Tissue Injury in Patients with Postoperative Respiratory Failure after Lung Resection Surgery: A Nested Case-Control Study.

Thoracic surgeries involving resection of lung tissue pose a risk of severe postoperative pulmonary complications, including acute respiratory distress syndrome (ARDS) and respiratory failure. Lung resections require one-lung ventilation (OLV) and, thus, are at higher risk of ventilator-induced lung injury (VILI) attributable to barotrauma and volutrauma in the one ventilated lung, as well as hypoxemia and reperfusion injury on the operated lung. Further, we also aimed to assess the differences in localized and systemic markers of tissue injury/inflammation in those who developed respiratory failure after lung surgery versus matched controls who did not develop respiratory failure. We aimed to assess the different inflammatory/injury marker patterns induced in the operated and ventilated lung and how this compared to the systemic circulating inflammatory/injury marker pattern. A case-control study nested within a prospective cohort study was performed. Patients with postoperative respiratory failure after lung surgery (n = 5) were matched with control patients (n = 6) who did not develop postoperative respiratory failure. Biospecimens (arterial plasma, bronchoalveolar lavage separately from ventilated and operated lungs) were obtained from patients undergoing lung surgery at two timepoints: (1) just prior to initiation of OLV and (2) after lung resection was completed and OLV stopped. Multiplex electrochemiluminescent immunoassays were performed for these biospecimen. We quantified 50 protein biomarkers of inflammation and tissue injury and identified significant differences between those who did and did not develop postoperative respiratory failure. The three biospecimen types also display unique biomarker patterns.

Electrocatalytic Isoxazoline-Nanocarbon Metal Complexes.

We report the synthesis of new carbon-nanomaterial-based metal chelates that enable effective electronic coupling to electrocatalytic transition metals. In particular, multiwalled carbon nanotubes (MWCNTs) and few-layered graphene (FLG) were covalently functionalized by a microwave-assisted cycloaddition with nitrile oxides to form metal-binding isoxazoline functional groups with high densities. The covalent attachment was evidenced by Raman spectroscopy, and the chemical identity of the surface functional groups was confirmed by X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The functional carbon nanomaterials effectively chelate precious metals Ir(III), Pt(II), and Ru(III), as well as earth-abundant metals such as Ni(II), to afford materials with metal contents as high as 3.0 atom %. The molecularly dispersed nature of the catalysts was confirmed by X-ray absorption spectroscopy (XAS) and energy-dispersive X-ray spectroscopy (STEM-EDS) elemental mapping. The interplay between the chelate structure on the graphene surface and its metal binding ability has also been investigated by a combination of experimental and computational studies. The defined ligands on the graphene surfaces enable the formation of structurally precise heterogeneous molecular catalysts. The direct attachment of the isoxazoline functional group on the graphene surfaces provides strong electronic coupling between the chelated metal species and the conductive carbon nanomaterial support. We demonstrate that the metal-chelated carbon nanomaterials are effective heterogeneous catalysts in the oxygen evolution reaction with low overpotentials and tunable catalytic activity.

CuH-Catalyzed Olefin Functionalization: From Hydroamination to Carbonyl Addition.

In organic synthesis, ligand-modified copper(I) hydride (CuH) complexes have become well-known reagents and catalysts for selective reduction, particularly toward Michael acceptors and carbonyl compounds. Recently, our group and others have found that these hydride complexes undergo migratory insertion (hydrocupration) with relatively unactivated and electronically unpolarized olefins, producing alkylcopper intermediates that can be leveraged to forge a variety of useful bonds. The resulting formal hydrofunctionalization reactions have formed the basis for a resurgence of research in CuH catalysis. This Account chronicles the development of this concept in our research group, highlighting its origin in the context of asymmetric hydroamination, evolution to more general C-X bond-forming reactions, and applications in the addition of olefin-derived nucleophiles to carbonyl derivatives.Hydroamination, the formal insertion of an olefin into the N-H bond of an amine, is a process of significant academic and industrial interest, due to its potential to transform widely available alkenes and alkynes into valuable complex amines. We developed a polarity-reversed strategy for catalytic enantioselective hydroamination relying on the reaction of olefins with CuH to generate chiral organocopper intermediates, which are intercepted by electrophilic amine reagents. By engineering the auxiliary ligand, amine electrophile, and reaction conditions, the scope of this method has since been extended to include many types of olefins, including challenging internal olefins. Further, the scope of amine reagents has been expanded to enable the synthesis of primary, secondary, and tertiary amines as well as amides, N-alkylated heterocycles, and anilines. All of these reactions exhibit high regio- and stereoselectivity and, due to the mild conditions required, excellent tolerance for heterocycles and polar functional groups.Though the generation of alkylcopper species from olefins was originally devised as a means to solve the hydroamination problem, we soon found that these intermediates could react efficiently with an unexpectedly broad range of electrophiles, including alkyl halides, silicon reagents, arylpalladium species, heterocycles, and carbonyl derivatives. The general ability of olefins to function as precursors for nucleophilic intermediates has proved particularly advantageous in carbonyl addition reactions because it overcomes many of the disadvantages associated with traditional organometallic reagents. By removing the need for pregeneration of the nucleophile in a separate operation, CuH-catalyzed addition reactions of olefin-derived nucleophiles feature improved step economy, enhanced functional group tolerance, and the potential for catalyst control over regio- and stereoselectivity. Following this paradigm, feedstock olefins such as allene, butadiene, and styrene have been employed as reagents for asymmetric alkylation of ketones, imines, and aldehydes.

Evidence for Simultaneous Dearomatization of Two Aromatic Rings under Mild Conditions in Cu(I)-Catalyzed Direct Asymmetric Dearomatization of Pyridine.

Bis(phosphine) copper hydride complexes are uniquely able to catalyze direct dearomatization of unactivated pyridines with carbon nucleophiles, but the mechanistic basis for this result has been unclear. Here we show that, contrary to our initial hypotheses, the catalytic mechanism is monometallic and proceeds via dearomative rearrangement of the phenethylcopper nucleophile to a Cpara-metalated form prior to reaction at heterocycle C4. Our studies support an unexpected heterocycle-promoted pathway for this net 1,5-Cu-migration beginning with a doubly dearomative imidoyl-Cu-ene reaction. Kinetics, substituent effects, computational modeling, and spectroscopic studies support the involvement of this unusual process. In this pathway, the CuL2 fragment subsequently mediates a stepwise Cope rearrangement of the doubly dearomatized intermediate to the give the C4-functionalized 1,4-dihydropyridine, lowering a second barrier that would otherwise prohibit efficient asymmetric catalysis.

The Quest for the Ideal Base: Rational Design of a Nickel Precatalyst Enables Mild, Homogeneous C-N Cross-Coupling.

Palladium-catalyzed amination reactions using soluble organic bases have provided a solution to the many issues associated with heterogeneous reaction conditions. Still, homogeneous C-N cross-coupling approaches cannot yet employ bases as weak and economical as trialkylamines. Furthermore, organic base-mediated methods have not been developed for Ni(0/II) catalysis, despite some advantages of such systems over those employing Pd-based catalysts. We designed a new air-stable and easily prepared Ni(II) precatalyst bearing an electron-deficient bidentate phosphine ligand that enables the cross-coupling of aryl triflates with aryl amines using triethylamine (TEA) as base. The method is tolerant of sterically congested coupling partners, as well as those bearing base- and nucleophile-sensitive functional groups. With the aid of density functional theory (DFT) calculations, we determined that the electron-deficient auxiliary ligands decrease both the pKa of the Ni-bound amine and the barrier to reductive elimination from the resultant Ni(II)-amido complex. Moreover, we determined that the preclusion of Lewis acid-base complexation between the Ni catalyst and the base, due to steric factors, is important for avoiding catalyst inhibition.

Enantioselective Allylation Using Allene, a Petroleum Cracking Byproduct.

Allene (C3H4) gas is produced and separated on million-metric-ton scale per year during petroleum refining but is rarely employed in organic synthesis. Meanwhile, the addition of an allyl group (C3H5) to ketones is among the most common and prototypical reactions in synthetic chemistry. Herein, we report that the combination of allene gas with inexpensive and environmentally benign hydrosilanes, such as PMHS, can serve as a replacement for stoichiometric quantities of allylmetal reagents, which are required in most enantioselective ketone allylation reactions. This process is catalyzed by copper salts and commercially available ligands, operates without specialized equipment or pressurization, and tolerates a broad range of functional groups. Furthermore, the exceptional chemoselectivity of this catalyst system enables industrially relevant C3 hydrocarbon mixtures of allene with methylacetylene and propylene to be applied directly.

CuH-Catalyzed Enantioselective Ketone Allylation with 1,3-Dienes: Scope, Mechanism, and Applications.

Chiral tertiary alcohols are important building blocks for the synthesis of pharmaceutical agents and biologically active natural products. The addition of carbon nucleophiles to ketones is the most common approach to tertiary alcohol synthesis but traditionally relies on stoichiometric organometallic reagents that are difficult to prepare, sensitive, and uneconomical. We describe a mild and efficient method for the copper-catalyzed allylation of ketones using widely available 1,3-dienes as allylmetal surrogates. Homoallylic alcohols bearing a wide range of functional groups are obtained in high yield and with good regio-, diastereo-, and enantioselectivity. Mechanistic investigations using density functional theory (DFT) implicate the in situ formation of a rapidly equilibrating mixture of isomeric copper(I) allyl complexes, from which Curtin-Hammett kinetics determine the major isomer of the product. A stereochemical model is provided to explain the high diastereo- and enantioselectivity of this process. Finally, this method was applied to the preparation of an important drug, ( R)-procyclidine, and a key intermediate in the synthesis of several pharmaceuticals.

Engaging Aldehydes in CuH-Catalyzed Reductive Coupling Reactions: Stereoselective Allylation with Unactivated 1,3-Diene Pronucleophiles.

Recently, CuH-catalyzed reductive coupling processes involving carbonyl compounds and imines have become attractive alternatives to traditional methods for stereoselective addition because of their ability to use readily accessible and stable olefins as surrogates for organometallic nucleophiles. However, the inability to use aldehydes, which usually reduce too rapidly in the presence of copper hydride complexes to be viable substrates, has been a major limitation. Shown here is that by exploiting relative concentration effects through kinetic control, this intrinsic reactivity can be inverted and the reductive coupling of 1,3-dienes with aldehydes achieved. Using this method, both aromatic and aliphatic aldehydes can be transformed into synthetically valuable homoallylic alcohols with high levels of diastereo- and enantioselectivities, and in the presence of many useful functional groups. Furthermore, using a combination of theoretical (DFT) and experimental methods, important mechanistic features of this reaction related to stereo- and chemoselectivities were uncovered.

A Regio- and Enantioselective CuH-Catalyzed Ketone Allylation with Terminal Allenes.

We report a method for the highly enantioselective CuH-catalyzed allylation of ketones that employs terminal allenes as allylmetal surrogates. Ketones and allenes bearing diverse and sensitive functional groups are efficiently coupled with high stereoselectivity and exclusive branched regioselectivity. In stoichiometric experiments, each elementary step of the proposed hydrocupration-addition-metathesis mechanism can be followed by NMR spectroscopy.

Mechanistic Insight Facilitates Discovery of a Mild and Efficient Copper-Catalyzed Dehydration of Primary Amides to Nitriles Using Hydrosilanes.

Metal-catalyzed silylative dehydration of primary amides is an economical approach to the synthesis of nitriles. We report a copper-hydride(CuH)-catalyzed process that avoids a typically challenging 1,2-siloxane elimination step, thereby dramatically increasing the rate of the overall transformation relative to alternative metal-catalyzed systems. This new reaction proceeds at ambient temperature, tolerates a variety of metal-, acid-, or base-sensitive functional groups, and can be performed using a simple ligand, inexpensive siloxanes, and low catalyst loading.

CuH-Catalyzed Asymmetric Reduction of α,ß-Unsaturated Carboxylic Acids to ß-Chiral Aldehydes.

The copper hydride (CuH)-catalyzed enantioselective reduction of α,ß-unsaturated carboxylic acids to saturated aldehydes is reported. This protocol provides a new method to access a variety of ß-chiral aldehydes in good yields, with high levels of enantioselectivity and broad functional group tolerance. A reaction pathway involving a ketene intermediate is proposed based on preliminary mechanistic studies and density functional theory calculations.

Breaking the Base Barrier: An Electron-Deficient Palladium Catalyst Enables the Use of a Common Soluble Base in C-N Coupling.

Due to the low intrinsic acidity of amines, palladium-catalyzed C-N cross-coupling has been plagued continuously by the necessity to employ strong, inorganic, or insoluble bases. To surmount the many practical obstacles associated with these reagents, we utilized a commercially available dialkyl triarylmonophosphine-supported palladium catalyst that facilitates a broad range of C-N coupling reactions in the presence of weak, soluble bases. The mild and general reaction conditions show extraordinary tolerance for even highly base-sensitive functional groups. Additionally, insightful heteronuclear NMR studies using 15N-labeled amine complexes provide evidence for the key acidifying effect of the cationic palladium center.

Ligand-Substrate Dispersion Facilitates the Copper-Catalyzed Hydroamination of Unactivated Olefins.

The current understanding of ligand effects in transition metal catalysis is mostly based on the analysis of catalyst-substrate through-bond and through-space interactions, with the latter commonly considered to be repulsive in nature. The dispersion interaction between the ligand and the substrate, a ubiquitous type of attractive noncovalent interaction, is seldom accounted for in the context of transition-metal-catalyzed transformations. Herein we report a computational model to quantitatively analyze the effects of different types of catalyst-substrate interactions on reactivity. Using this model, we show that in the copper(I) hydride (CuH)-catalyzed hydroamination of unactivated olefins, the substantially enhanced reactivity of copper catalysts based on bulky bidentate phosphine ligands originates from the attractive ligand-substrate dispersion interaction. These computational findings are validated by kinetic studies across a range of hydroamination reactions using structurally diverse phosphine ligands, revealing the critical role of bulky P-aryl groups in facilitating this process.

Asymmetric Copper Hydride-Catalyzed Markovnikov Hydrosilylation of Vinylarenes and Vinyl Heterocycles.

We report a highly enantioselective CuH-catalyzed Markovnikov hydrosilylation of vinylarenes and vinyl heterocycles. This method has a broad scope and enables both the synthesis of isolable silanes and the conversion of crude products to chiral alcohols. Density functional theory calculations support a mechanism proceeding by hydrocupration followed by σ-bond metathesis with a hydrosilane.

Regiodivergent and Diastereoselective CuH-Catalyzed Allylation of Imines with Terminal Allenes.

A copper-catalyzed, chemoselective hydrometalation process enables the use of simple allenes as allylmetal nucleophile surrogates in imine allylation reactions. By modulating the nitrogen-protecting group, either highly branched- or linear-selective addition can be achieved from the same allene. Both reactions exhibit excellent diastereoselectivity and broad functional-group tolerance. Preliminary results indicate that good enantioselectivity can also be achieved in the linear-selective reaction. Finally, a mechanistic model for the regiodivergence is proposed on the basis of density functional theory calculations.

Enantioselective synthesis of tertiary α-chloro esters by non-covalent catalysis.

We report an enantioselective approach to tertiary α-chloro esters through the reaction of silyl ketene acetals and N-chlorosuccinimide. The reaction is promoted by a chiral squaramide catalyst, which is proposed to engage both reagents exclusively through non-covalent interactions. Application of the tertiary chloride products in stereospecific substitution reactions is demonstrated.

Asymmetric Mannich synthesis of α-amino esters by anion-binding catalysis.

We report a scalable, one-pot Mannich route to enantioenriched α-amino esters by direct reaction of α-chloroglycine ester as a practical imino ester surrogate. The reaction is promoted by a chiral aminothiourea, which is proposed to operate cooperatively by generating an iminium ion by chloride abstraction and an enolate by deprotonation, followed by highly stereoselective C-C bond formation between both reactive intermediates associated non-covalently within the catalyst framework.

Robotic versus laparoscopic Roux-en-Y gastric bypass (RYGB) in obese adults ages 18 to 65 years: a systematic review and economic analysis.

BACKGROUND: In the United States, 37.5 % of adults (78 million) are obese. The direct medical costs of treating obesity-related disease account for more than 6 % of the national health expenditure. Robotic bariatric surgery is becoming more common, but it is unclear whether robotic procedures result in lower complication rates. Additionally, some evidence is conflicting regarding the costs of robotic Roux-en-Y gastric bypass (RYGB) compared with those of laparoscopic RYGB. This study aimed to compare complication rates, operative characteristics, and expected costs between robotic and laparoscopic RYGB. METHODS: A systematic review of the literature was performed with searches of five databases and grey literature, hand searches, and reference and forward citation searches. Studies comparing robotic versus laparoscopic RYGB involving patients ages 18-65 years who met the National Institutes of Health (NIH) criteria for bariatric surgery were included in the study if they reported overall or major complication rates. Outcomes were pooled using random-effects metaanalysis. A decision-tree economic analysis was performed to calculate expected costs associated with each technique. RESULTS: The systematic search strategy returned 1,374 potentially relevant studies. The inclusion criteria were met by 10 of these studies, which included results from 2,557 patients. The overall major and minor complications did not differ significantly between the robotic and laparoscopic groups. The rates for anastomotic leak, bleeding, stricture, and reoperation did not differ significantly. An economic analysis found that the expected costs for robotic RYGB ($15,447) were higher than for laparoscopic RYGB ($11,956). Sensitivity analyses produced similar results. CONCLUSION: The complication rates did not differ significantly between robotic and laparoscopic RYGB, but the expected costs were greater for robotic RYGB. Further cost effectiveness analyses are recommended before adoption of a robotic approach to RYGB.

Aminative Suzuki-Miyaura coupling.

The Suzuki-Miyaura and Buchwald-Hartwig coupling reactions are widely used to form carbon-carbon (C-C) and carbon-nitrogen (C-N) bonds, respectively. We report the incorporation of a formal nitrene insertion process into the Suzuki-Miyaura reaction, altering the products from C-C-linked biaryls to C-N-C-linked diaryl amines and thereby joining the Suzuki-Miyaura and Buchwald-Hartwig coupling pathways to the same starting-material classes. A combination of a bulky ancillary phosphine ligand on palladium and a commercially available amination reagent enables efficient reactivity across aryl halides and pseudohalides, boronic acids and esters, and many functional groups and heterocycles. Mechanistic insights reveal flexibility on the order of bond-forming events, suggesting potential for expansion of the aminative cross-coupling concept to encompass diverse nucleophiles and electrophiles as well as four-component variants.