The Sm gene conferring resistance to gray leaf spot disease encodes an NBS-LRR (nucleotide-binding site-leucine-rich repeat) plant resistance protein in tomato.

KEY MESSAGES: Gray leaf spot (GLS) resistance in tomato is controlled by one major dominant locus, Sm. Sm was fine mapped, and the nucleotide-binding site-leucine-rich repeat (NBS-LRR) gene Solyc11g020100 was identified as a candidate gene for Sm. Further functional analysis indicated that this gene confers high resistance to Stemphylium lycopersici in tomato. Tomato (Solanum Lycopersicum) is widely consumed and cultivated in the world. Gray leaf spot (GLS), caused by Stemphylium lycopersici (S. lycopersici), is one of the most devastating diseases in tomato production. To date, only one resistance gene, Sm, which confers high resistance against GLS disease, has been identified in the wild tomato species Solanum pimpinellifolium. This resistance locus (comprising the Sm gene) has been transferred into the cultivated variety 'Motelle'. Although several studies have reported the mapping of the Sm gene, it has not been cloned, limiting the utilization in tomato breeding. Here, we cloned Sm using a map-based cloning strategy. The Sm gene was mapped in a region of 160 kb at chromosome 11 between two markers, namely, M390 and M410, by using an F2 population from a cross between the resistant cultivar 'Motelle' (Mt) and susceptible line 'Moneymaker' (Mm). Three clustered NBS-LRR (nucleotide-binding site-leucine-rich repeat) resistance genes, namely, Solyc11g020080 (R1), Solyc11g020090 (R2), and Solyc11g020100 (R3) were identified in this interval. Nonsynonymous SNPs were identified in only the open reading frame (ORF) of R3, suggesting it as a strong candidate for the Sm gene. Furthermore, gene silencing of R3 abolished the high resistance to S. lycopersici in Motelle, demonstrating that this gene confers high resistance to S. lycopersici. The cloning of Sm may speed up its utilization for breeding resistant tomato varieties and represents an important step forward in our understanding of the mechanism underlying the resistance to GLS.

Transcriptome Analysis of the Cf-13-Mediated Hypersensitive Response of Tomato to Cladosporium fulvum Infection.

Tomato leaf mold disease caused by Cladosporium fulvum (C. fulvum) is one of the most common diseases affecting greenhouse tomato production. Cf proteins can recognize corresponding AVR proteins produced by C. fulvum, and Cf genes are associated with leaf mold resistance. Given that there are many physiological races of C. fulvum and that these races rapidly mutate, resistance to common Cf genes (such as Cf-2, Cf-4, Cf-5, and Cf-9) has decreased. In the field, Ont7813 plants (carrying the Cf-13 gene) show effective resistance to C. fulvum; thus, these plants could be used as new, disease-resistant materials. To explore the mechanism of the Cf-13-mediated resistance response, transcriptome sequencing was performed on three replicates each of Ont7813 (Cf-13) and Moneymaker (MM; carrying the Cf-0 gene) at 0, 9, and 15 days after inoculation (dai) for a total of 18 samples. In total, 943 genes were differentially expressed, specifically in the Ont7813 response process as compared to the Moneymaker response process. Gene ontology (GO) classification of these 943 differentially expressed genes (DEGs) showed that GO terms, including "hydrogen peroxide metabolic process (GO_Process)", "secondary active transmembrane transporter activity (GO_Function)", and "mismatch repair complex (GO_Component)", which were the same as 11 other GO terms, were significantly enriched. An analysis of the Kyoto Encyclopedia of Genes and Genomes (KEGG) revealed that many key regulatory genes of the Cf-13-mediated resistance response processes were involved in the "plant hormone signal transduction" pathway, the "plant-pathogen interaction" pathway, and the "MAPK signaling pathway-plant" pathway. Moreover, during C. fulvum infection, jasmonic acid (JA) and salicylic acid (SA) contents significantly increased in Ont7813 at the early stage. These results lay a vital foundation for further understanding the molecular mechanism of the Cf-13 gene in response to C. fulvum infection.

Genome-Wide Identification, Characterization and Expression Analysis of the JAZ Gene Family in Resistance to Gray Leaf Spots in Tomato.

The plant disease resistance system involves a very complex regulatory network in which jasmonates play a key role in response to external biotic or abiotic stresses. As inhibitors of the jasmonic acid (JA) signaling pathway, JASMONATE ZIM domain (JAZ) proteins have been identified in many plant species, and their functions are gradually being clarified. In this study, 26 JAZ genes were identified in tomato. The physical and chemical properties, predicted subcellular localization, gene structure, cis-acting elements, and interspecies collinearity of 26 SlJAZ genes were subsequently analyzed. RNA-seq data combined with qRT-PCR analysis data showed that the expression of most SlJAZ genes were induced in response to Stemphylium lycopersici, methyl jasmonate (MeJA) and salicylic acid (SA). Tobacco rattle virus RNA2-based VIGS vector (TRV2)-SlJAZ25 plants were more resistant to tomato gray leaf spots than TRV2-00 plants. Therefore, we speculated that SlJAZ25 played a negative regulatory role in tomato resistance to gray leaf spots. Based on combining the results of previous studies and those of our experiments, we speculated that SlJAZ25 might be closely related to JA and SA hormone regulation. SlJAZ25 interacted with SlJAR1, SlCOI1, SlMYC2, and other resistance-related genes to form a regulatory network, and these genes played an important role in the regulation of tomato gray leaf spots. The subcellular localization results showed that the SlJAZ25 gene was located in the nucleus. Overall, this study is the first to identify and analyze JAZ family genes in tomato via bioinformatics approaches, clarifying the regulatory role of SlJAZ25 genes in tomato resistance to gray leaf spots and providing new ideas for improving plant disease resistance.

The spillover effects of China's carbon trading policy on coordinated emission efficiency.

The significance of carbon trading policy (CTP) for China's carbon reduction goals cannot be overstated. Examining the practical impacts and inherent features of this policy is crucial for fostering its healthy development and effectiveness. This study utilizes the directional SBM super-efficiency model to calculate the combined emission efficiency (CEE) of greenhouse gases and atmospheric pollutants across 30 provinces and cities in China from 2005 to 2020. Through spatiotemporal analysis of the CEE evolution using hotspot analysis, it is evident that hotspots gradually shift towards the southeast coastal areas over time, while cold spots shift towards the northwest. Additionally, employing the differences-in-differences (DID) model and conducting robustness tests, the study finds that the CTP significantly enhances the CEE development. Spatial econometric analysis reveals that the CEE primarily follows a distribution pattern characterized by low-low (LL) and high-high (HH) regions, with positive spatial spillover effects. However, due to the incomplete state of early green development in China, the CTP temporarily exhibits negative spatial spillover effects. Finally, considering the current state of China's carbon trading policy, corresponding policy recommendations are proposed in this paper.

Comparison of Clinical Effects of the Modified Masquelet Technique and Kirschner Wire External Fixation-Assisted Autogenous Bone Transplantation in the Treatment of Segmental Metacarpophalangeal Bone Defects.

OBJECTIVE: The present study aims to explore the (1) clinical effects of the modified Masquelet technique, whose improved Masquelet technique innovates the in vitro plasticity of the bone cement module and prefabricated hollow design, and the Kirschner wire external fixation-assisted autologous bone transplantation technique in the treatment of segmental metacarpophalangeal bone defects and (2) the differences between the two techniques. METHODS: The clinical data of 32 patients with segmental metacarpophalangeal bone defects (15 patients treated with the modified Masquelet technique and 17 patients treated with the self-made Kirschner wire external fixation technique) admitted to our department between January 2012 and January 2020 were retrospectively analyzed. The postoperative bone healing time, hand function, and complications were compared between the two groups. RESULTS: The two groups were comparable; there were no significant differences in age, sex, length of bone defect, and time from injury to operation between the two groups (P > 0.05). All patients were followed up with for 6-24 months (average = 13.7 months), and all patients with segmental metacarpophalangeal bone defects achieved fracture healing. The postoperative hospital stay, fracture healing time, functionary scores of the affected limb, and incidence of severe complications were better in the modified group than in the external fixation group (P < 0.05). CONCLUSION: Compared with the Kirschner wire external fixation stent assisted autologous bone transplantation, the improved Masquelet technique has the advantages of simple operation, fast healing, accurate effect, wide indications, and less complications, making it more worthy of clinical promotion.

[Effects of Long-Term Application of Chemical Fertilizers and Organic Fertilizers on Heavy Metals and Their Availability in Reddish Paddy Soil].

To investigate the effects of long-term fertilization on the accumulation and availability of heavy metals in reddish paddy soil and to analyze the major influencing factors, soil samples were collected after the later rice was harvested in 2018 from a long-term fertilization field experiment that began in 1984. Six treatments were selected, namely CK (control without fertilization), PK (P and K fertilizer), and NPK (N, P, and K fertilizer), and different proportions of organic fertilizer plus chemical fertilizer (M1NPK: 30%M+70%NPK; M2NPK: 50%M+50%NPK; and M3NPK: 70%M+30%NPK), soil chemical properties, total and available heavy metal contents, and the relationships between the available forms of heavy metals and soil chemical parameters and total heavy metals (THM) were analyzed. The results showed that ① long-term fertilization changed the soil chemical properties; compared with those of CK, PK significantly increased the contents of soil available phosphorus (AP) and available potassium (AK), NPK significantly increased the soil organic matter (SOM), cation exchange capacity (CEC), AP, and AK, and the organic fertilizer treatments significantly increased the contents of SOM, CEC, AP, AK, and nitrate (NO3--N). ② There were slight variations in the THM contents under the chemical fertilizer treatments (PK and NPK), whereas the organic fertilizer treatments significantly increased the total contents of Cu, Zn, and Cd. ③ The chemical fertilizer treatments significantly increased the available Cr and As, whereas the organic fertilizer treatments significantly increased the available Cu, Zn, Cr, Cd, As, and Fe. ④ There were significant positive correlations between the available Cu, Zn, Cr, Cd, As, and Fe and the SOM, CEC, AP, and NO3--N. In addition, the available Zn and Cd were significantly positively correlated with the soil pH, whereas the available Pb was significantly negatively correlated with soil pH, SOM, CEC, and NO3--N. ⑤ There were significant positive correlations between the available and total contents of Cu, Zn, and Cd, whereas there were significant negative correlations between the available and total contents of Cr and Fe. ⑥ Redundancy analysis showed that SOM and pH accounted for 80.7% and 5.5% of the variation in THM, whereas the soil CEC, AP, and pH accounted for 81.1%, 4.9%, and 3.3% of the variation in the available heavy metals, respectively. ⑦ The partial least squares path model analysis showed that the path coefficients of the THM, CEC, and AP on the available state of heavy metals were 0.459, 0.417, and 0.293, respectively. Long-term application of organic manure, such as pig manure, significantly improved the soil chemical properties and affected the availability of heavy metals, and soil CEC and AP may play key roles in regulation.

12ß,14-Dihy-droxy-3-oxo-5ß,20(22)-cardenolide monohydrate.

The title compound, digoxigenone, C(23)H(30)O(5)·H(2)O, was biotransformed from digoxigenin. In the crystal, inter-molecular O-H⋯O hydrogen bonds contribute to the formation of a three-dimensional supra-molecular structure. The title compound has three fused six-membered rings (A,B,C) and two non-fused five-membered rings (D,E). As in other structures, compound nucleus has a cis-trans-cis conformation for the A-B,B-C,C-D ring junctions with rings A, B and C exhibiting chair conformations.

Treatment of mallet finger deformity with a modified palmaris longus tendon graft through a bone tunnel.

OBJECTIVE: To investigate the clinical effect of treating mallet finger deformity using a modified palmaris longus tendon graft through a bone tunnel. METHODS: Altogether, 21 patients with mallet finger deformity (16 men, 5 women; average age 31 years, range 19-47 years) were treated with a modified palmaris longus tendon graft through a bone tunnel during 18 months (2014-2016). Four index fingers, seven middle fingers, eight ring fingers, and two little fingers were treated for four cutting injuries, eleven finger sprains, four crush injuries, and two twist injuries (7 open and 14 closed injuries). Duration from injury to surgery was 9 h to 13 weeks. Three patients underwent surgery after 6 weeks of unsuccessful conservative treatment. No tendon was attached to the extensor tendon insertion in 16 patients, and 5 had residual tendon of <0.2 cm attached. All patients had distal segment flexion deformity and dorsiflexion disorder. Surgery comprised transverse penetration and vertical drilling of the base of the distal phalanx (2.0 and 2.5 mm diameter drills). Equal shallow semitendinosus pieces of the palmaris longus tendon (4 cm) were obtained from the sagittal end and were passed through a dorsal bone hole, emerging from a transverse bone hole. The two bundles were sutured to the main tendon. Tension was adjusted, and the broken ends were sutured. The distal interphalangeal joints were fixed in hyperextension. RESULTS: All patients were followed for 7-16 months (average 6.0 ± 0.3 months) postoperatively. All 21 patients had grade A wound healing, with no complications (e.g., necrotic wound, recurrence, joint stiffness). The mallet finger deformity was corrected with good appearance, no obvious abnormalities, and satisfactory flexion and extension. Two patients had a superficial wound infection. Each recovered after symptomatic treatment. One patient had a mild result, with limited extension. There were no recurrences. Results were evaluated according to Patel et al.'s system, which revealed 15 excellent and 5 good results (combined 95.23% rate), with 1 mild result (limited extension). Patients were satisfied with the appearance and function of the affected fingers, and the desired surgical end result was achieved. CONCLUSION: Use of this modified surgery for treating mallet finger deformity, especially with no or little tendon attached at the extensor tendon insertion, results in nearly anatomical reconstruction of the extensor tendon insertion. Its advantages include simple surgery, reliable fixation, fewer complications, and clinical efficacy.