Cannabidiol-loaded microparticles embedded in a porous hydrogel matrix for biomedical applications.

In this study, poly (lactic-co-glycolic acid) (PLGA) microparticles loaded with cannabidiol (CBD) were synthesized (PLGA@CBD microparticles) and embedded up to 10 wt% in a chondroitin sulfate/polyvinyl alcohol hydrogel matrix. In vitro chemical, physical, and biological assays were carried out to validate the potential use of the modified hydrogels as biomaterials. The microparticles had spherical morphology and a narrow range of size distribution. CBD encapsulation efficiency was around 52%, loading was approximately 50%. Microparticle addition to the hydrogels caused minor changes in their morphology, FTIR and thermal analyses confirmed these changes. Swelling degree and total porosity were reduced in the presence of microparticles, but similar hydrophilic and degradation in phosphate buffer solution behaviors were observed by all hydrogels. Rupture force and maximum strain at rupture were higher in the modified hydrogels, whereas modulus of elasticity was similar across all materials. Viability of primary human dental pulp cells up to 21 days was generally not influenced by the addition of PLGA@CBD microparticles. The control hydrogel showed no antimicrobial activity against Staphylococcus aureus, whereas hydrogels with 5% and 10% PLGA@CBD microparticles showed inhibition zones. In conclusion, the PLGA@CBD microparticles were fabricated and successfully embedded in a hydrogel matrix. Despite the hydrophobic nature of CBD, the physicochemical and morphological properties were generally similar for the hydrogels with and without the CBD-loaded microparticles. The data reported in this study suggested that this original biomaterial loaded with CBD oil has characteristics that could enable it to be used as a scaffold for tissue/cellular regeneration.

Influence of prosthodontic rehabilitation and dietary advice on glycaemic control, nutritional status and oral health-related quality of life of older adults with type 2 diabetes.

OBJECTIVES: This prospective clinical study aimed to determine the influence of oral prosthodontic rehabilitation with partial removable dentures and simplified dietary advice on glycaemic control, nutritional status and oral health-related quality of life (OHRQoL) of older adults with type 2 diabetes. BACKGROUND: Individuals with tooth loss who did not wear complete or partial dentures are more likely to be at nutritional risk, suggesting that using dental prostheses would benefit the re-establishment of an adequate nutritional status and potentially improve quality of life. Nutritional therapy is essential for diabetes prevention, treatment and management, favouring glycaemic control. The literature provides little evidence on the contribution of partial removable dentures to improving diabetes control, nutritional profile and satisfaction in older adults, especially those with type 2 diabetes. MATERIALS AND METHODS: Older individuals diagnosed with type 2 diabetes mellitus, aged 60 years or older and needing oral rehabilitation with partial removable dentures were eligible for this prospective study. The primary outcome measure was glycaemic control, measured by glycated haemoglobin (HbA1c) levels. The Oral Health Impact Profile (OHIP-14) questionnaire and the Mini Nutritional Assessment short-form (MNA-SF) represented secondary outcome measures. These measures were assessed at baseline and 12 months of follow-up after prosthesis delivery, combined with simple dietary advice in pamphlet form. The data were analysed using the Wilcoxon matched-pairs test. RESULTS: Forty-four patients who met the inclusion criteria and required treatment with removable partial dentures were selected for this study, which was carried out for a year. During this period, seven participants declined to participate because they moved to another city. Hence, a final sample of 37 participants (16 men and 21 women, average age of 65.8 years, ranging from 60 to 83 years) were included in the study. No laboratory parameter (HbA1c levels) changed significantly during the investigation. The number of older adults at risk of malnutrition was significantly lower at 12 months than at baseline. Furthermore, nutritional status significantly improved 12 months after prosthodontic treatment combined with dietary advice, and the effect sizes were large. OHRQoL significantly improved after prosthodontic therapy combined with dietary advice. CONCLUSIONS: Prosthodontic treatment with partial dentures associated with simple dietary advice did not influence glycaemic control but improved the nutritional status and OHRQoL of older adults with type 2 diabetes.

Antibacterial activity and physicochemical properties of a sealer containing copaiba oil.

This study aimed to evaluate the antimicrobial activity and physicochemical properties of a novel dual-cure endodontic sealer containing copaiba oil. The copaiba oil was obtained and characterized by gas chromatography (GC), and the minimum inhibitory concentration (MIC) was performed. The experimental sealers were formulated with copaiba oil concentrations of 0, 0.5, 1, and 2%, and the RealSeal™ (Sybron endo, Orange, USA) and AH Plus (Dentsply De Trey Gmbh, Konstanz, Germany) were used as the commercial references. The antimicrobial activity of the sealers was evaluated by the direct contact test for 1h and 24h. To evaluate the physicochemical properties of the sealers, the degree of conversion, setting time, film thickness, dimensional stability, and radiopacity tests were performed. The data were statistically analyzed by one-way ANOVA and Tukey's test (α = 0.05). Concerning the results, the sealers containing copaiba oil showed antimicrobial activity without harming the physicochemical properties.

The effect of prosthetic rehabilitation with or without dietary advice on nutritional status in elderly patients: a systematic review.

BACKGROUND: Elderly people frequently report tooth loss, affecting their nutritional status. There is a gap in the scientific evidence about the influence of prosthodontic rehabilitation on nutritional status. OBJECTIVE: To investigate the influence of prosthodontic rehabilitation combinates or not with dietary advice on nutritional status in elderly patients. METHODS: A systematic literature search was conducted in three electronic databases to identify randomized clinical trials that evaluated the effect of prosthetic rehabilitation on nutritional status in subjects aged 60 years or older, with a follow-up of at least 1 month after prosthesis rehabilitation. RESULTS: Of the 1517 articles identified in the initial search, 12 were selected for the final review. No significant difference between the types of prosthesis were found regarding the chewing by the elderly population. Although patients who received prosthetic treatment had significant improvement in chewing ability, a consistent pattern of improvement in nutritional status was not observed when they did not receive dietary advice. In addition, the association between the condition of the dentition, the masticatory performance and nutritional change of elderly patients has been found. Studies that evaluated simultaneous complete denture treatment and simple dietary advice showed an improvement of nutrient intake in elderly patients. CONCLUSIONS: Isolated prosthetic rehabilitation may not have the effect of exerting a change in nutritional status of edentulous elderly patients. In general, simultaneous dietary consulting and prosthetic treatment in combination may improve dietary habits, since masticatory capacity and efficiency are not the only factors that influence the nutritional status of a patient.

Synthesis and characterization of calcium-releasing elastomeric resin-based endodontic sealers.

OBJECTIVES: To evaluate the incorporation of halloysite nanotubes (HNTs) loaded with one of two calcium sources (i.e., calcium hydroxide/CaOH2 or beta-tricalcium phosphate/ß-TCP) on the physicochemical and biological properties of an experimental resin-based dual-cured endodontic sealer. MATERIALS AND METHODS: HNTs were encapsulated with CaOH2 or ß-TCP at 10 wt.%. HNTs containing CaOH2 or ß-TCP were added into the experimental sealers at 50 wt.%. The control sealers were the calcium-free HNT-modified resin-based experimental sealer and AH Plus™, a commercially available endodontic sealer. Degree of conversion, setting time, flow, film thickness, radiopacity, dimensional stability, and calcium ions release were determined. Antibiofilm properties and cytocompatibility of the formulated sealers and commercial control were also evaluated. One and two-way ANOVA analysis followed by Tukey's post hoc test was conducted to evaluate the effect of the independent variable on the evaluated properties. RESULTS: FTIR confirmed the encapsulation of calcium sources into HNTs. Regarding flow and film thickness, the values obtained from these sealers were in accordance with the specifications provided by ISO 6876. For radiopacity, AH Plus™ achieved the highest radiopacity (p<0.05). Among the experimental formulations, all experimental HNT-containing compositions exhibited values below 3 mm Al. The experimental sealers showed greater dimensional changes when compared to the commercial (AH Plus™) control. The release of calcium ions was observed for the HNT_CaOH2 and HNT_ß-TCP sealers without statistical differences. Experimental sealers containing HNT_CaOH2 and HNT_ß-TCP significantly reduced the CFU/mL count and showed cell compatibility. CONCLUSIONS: The findings of this study demonstrate that the incorporation of HNT_CaOH2 or HNT_ß-TCP into resin-based experimental sealers promoted antimicrobial effects and gradual calcium release without impairing cytocompatibility or physicochemical properties of the sealers. Still, an adjustment to reach the minimal radiopacity established by ISO 6876 is needed. CLINICAL RELEVANCE: The experimental resin-based sealers seemed to be an alternative for endodontics. The incorporation of calcium sources exerts promising antimicrobial effects while displaying low cell toxicity.

Non-carious cervical lesions (NCCLs) and associated factors: A multilevel analysis in a cohort study in southern Brazil.

AIM: To investigate the prevalence of non-carious cervical lesions (NCCLs) and their association with individual and tooth-related factors in adults from the 1982 Pelotas Birth Cohort. MATERIALS AND METHODS: Participants were interviewed and clinically examined at the age of 31. NCCL was defined as loss of dental tissue without bacterial involvement in the cervical region. Independent variables were the socioeconomic, demographic, behavioural, and clinical characteristics. Associations were tested using a multilevel Poisson regression model. RESULTS: Five-hundred and thirty-nine participants were clinically examined, with a 26% prevalence of NCCLs, which were more prevalent in the maxilla (56.5%) and in premolars (72.9%). In the multilevel analysis, women presented lower prevalence than men [prevalence ratio (PR) 0.59 (0.48-0.73)]; those who reported smoking at both 22 and 30 years of age had more NCCLs than those who never smoked [PR 1.65 (1.31-2.07)]; and high-frequency brushers presented higher prevalence than low-frequency brushers [PR 1.26 (1.03-1.55)]. Gingival recession increased 10 times the prevalence of NCCLs [PR 10.03 (8.15-12.35)], while the presence of periodontal pockets (≥4 mm) reduced the prevalence of NCCLs [PR 0.43 (0.28-0.66)]. CONCLUSIONS: NCCLs were more prevalent in males, smokers, and those with higher frequency of toothbrushing. While the presence of periodontal pockets was associated with a lower prevalence of NCCLs, gingival recession was a strong clinical indicator for the presence of NCCLs.

Novel polymethyl methacrylate modified with metal methacrylate monomers: biological, physicomechanical, and optical properties.

This study sought to evaluate the physical and antimicrobial properties of a thermopolymerizable acrylic resin (PMMA) modified with metallic methacrylate monomers -zirconia (ZM), tin (TM), and di-n-butyl (DNTMB) methacrylates. Color stability was evaluated before and after immersion of samples in a staining solution by a digital spectrophotometer. The mechanical brushing test was evaluated by the roughness test. The flexural strength test used a mechanical testing machine. Human keratinocytes were used to assess cell viability and the biofilm formation assay was carried out for 5 days, in a microcosms model after one year of specimen storage. For statistical analysis, the method chosen was based on adherence to the normal distribution model and equality of variances (p < 0.05). The addition of DNTMB to PMMA promoted great antimicrobial action, acceptable cytocompatibility, without hampering the physical-mechanical properties of the commercial material. Therefore, the modified PMMA proved to be a promisor alternative to conventional resins.This study sought to evaluate the physical and antimicrobial properties of a thermopolymerizable acrylic resin (PMMA) modified with metallic methacrylate monomers -zirconia (ZM), tin (TM), and di-n-butyldimethacrylate-tin (DNTMB) methacrylates. Color stability was evaluated before and after immersion of samples in a staining solution using a digital spectrophotometer. The mechanical brushing test was evaluated by the roughness test. The flexural strength test used a mechanical testing machine. Human keratinocytes were used to assess cell viability and the biofilm formation assay was carried out for 5 days in a microcosm model after one year of specimen storage. For statistical analysis, the method chosen was based on adherence to the normal distribution model and equality of variances (p < 0.05). The addition of DNTMB to PMMA promoted great antimicrobial action, acceptable cytocompatibility, without hampering the physical-mechanical properties of the commercial material. Therefore, the modified PMMA proved to be a promising alternative to conventional denture base resins for dental use.

In vitro efficacy of commercial and experimental proteolytic enzyme-based whitening dentifrices on enamel whitening and superficial roughness.

OBJECTIVE: To evaluate the whiteness index (WID ) and surface roughness (Ra) of bovine enamel after simulated tooth brushing with different commercial and experimental whitening dentifrices. MATERIALS AND METHODS: Cylindrical enamel bovine specimens were acid etched, stained, and divided in nine groups (n = 8): Colgate® Optic White®, Crest® Baking Soda and Peroxide, Arm and Hammer® Advanced White™ Extreme Whitening, Rembrandt® Deeply White® + Peroxide, Close up® White Attraction Natural Glow, Hinode Prowhite, and experimental dentifrice containing papain (PP), bromelain (PB), or papain and bromelain (PPB). Ra and WID were obtained initially and after 600, 1200, and 3,600 cycles of simulated tooth brushing. Data were analyzed using two-way analysis of variance test (α = 0.05). RESULTS: Ra was significantly influenced by both dentifrice (p = 0.043) and period of tooth-brushing simulation (p < 0.001). Except for PP and PPB, all groups showed a statistically significant increase in Ra after simulated tooth brushing. After staining and brushing, none of the materials tested increased the initial WID . CONCLUSIONS: The effect of commercial whitening dentifrices may be related to their high abrasiveness. Experimental formulations tested provided a similar effect without undesired wear of enamel. Whitening dentifrices only act through an abrasive effect rather than bleaching the tooth structures. When used, special care must be taken for avoid undesired wear of enamel. Experimental dentifrices provided similar removal of extrinsic stains without undesired abrasiveness; however, this effect may be due to the use of less aggressive abrasives in their formulations.

Physicomechanical, optical, and antifungal properties of polymethyl methacrylate modified with metal methacrylate monomers.

STATEMENT OF PROBLEM: The high recurrence rates of denture stomatitis may be associated with the resistance of biofilms to therapeutics. Therefore, methods that provide biomaterials with antifungal properties are an attractive solution to improving microbial control. PURPOSE: The purpose of this in vitro study was to modify conventional polymethyl methacrylate (PMMA) through the incorporation of metal methacrylate monomers and to evaluate the physicomechanical and optical properties and antifungal activity of the modified materials. MATERIAL AND METHODS: Experimental denture base acrylic resins were fabricated through the addition of zirconium methacrylate (ZM), tin methacrylate (TM), and di-n-butyldimethacrylate-tin (DNBMT) to the liquid of a commercially available denture base PMMA resin. Unmodified PMMA resin was used as the control. The degree of conversion of the materials was tested through Fourier transform infrared spectroscopy (n=3). A digital spectrophotometer was used to assess the color change of the modified materials (n=8). Differences in Knoop hardness and roughness between experimental groups were also evaluated (n=8). A biofilm accumulation test with Candida albicans (ATCC 62342) (n=4) was performed for 5 days in Sabouraud broth culture supplemented with 10% sucrose. Data were subjected to analysis of variance and the post hoc Tukey honestly significant difference test (α=.05). RESULTS: The degree of conversion and color-change values of the experimental materials were statistically similar to those of the control (P=.593). The incorporation of DNBMT significantly increased the hardness of the modified material (P=.014). The ZM, TM, and DNBMT groups had higher antifungal activity against C. albicans (P=.001) and lower roughness than the control group (control 0.65 ±0.05 µm; ZM 0.34 ±0.09 µm, TM 0.34 ±0.11 µm, and DNBMT 0.41 ±0.08 µm). CONCLUSIONS: The metal-containing methacrylate monomers provided antifungal action to the modified materials without affecting the physicomechanical or optical properties of the denture base resin. ZM, TM, and DNBMT are potential reactive agents for the fabrication of PMMA denture base resins with antifungal properties.

Anti-biofilm activity of a novel pit and fissure self-adhesive sealant modified with metallic monomers.

Dental plaque is a biofilm composed of a complex oral microbial community. The accumulation of plaque in the pit and fissures of dental elements often leads to the development of tooth decay (dental caries). Here, potent anti-biofilm materials were developed by incorporating zinc methacrylates or di-n-butyl-dimethacrylate-tin into the light-curable sealant and their physical, mechanical, and biological properties were evaluated. The data revealed that 5% di-n-butyl-dimethacrylate-tin (SnM 5%) incorporated sealant showed strong anti-biofilm efficacy against various single-species (Streptococcus mutans or Streptococcus oralis or Candida albicans) and S. mutans-C. albicans cross-kingdom dual-species biofilms without either impairing the mechanical properties of the sealant or causing cytotoxicities against mouse fibroblasts. The findings indicate that the incorporation of SnM 5% in the experimental pit and fissure self-adhesive sealant may have the potential to be part of current chemotherapeutic strategies to prevent the formation of cariogenic oral biofilms that cause dental caries.

Physico-chemical and antimicrobial properties and the shelf life of experimental endodontic sealers containing metal methacrylates.

The objective of this study was to evaluate the physico-chemical and antimicrobial properties of a dual polymerization experimental endodontic sealer (E) and experimental sealers containing dibutyltin methacrylate (Sn2+) (ETs) or calcium methacrylate (Ca2+) (ECs). The pH and ion release levels of the sealers were measured. The dimensional stability was evaluated in accordance with ISO 6876. Biofilm growth inhibition was evaluated using confocal laser scanning microscopy (CLSM). Biofilm viability analysis was performed using the SYTO 9 technique. The shelf life was evaluated through the degree of conversion and film thickness tests after the sealers had been stored for different periods of time. For statistical analysis, ANOVA and Tukey's post hoc test were used, with a significance level of 5%. ETs revealed better anti-biofilm potential after 15 days than that of the controls. The degree of conversion was reduced after the shelf-life period. The addition of calcium and dibutyltin methacrylate improved the anti-biofilm properties of the experimental endodontic sealer without impairing their physico-chemical properties.

Efficacy of natural, peroxide-free tooth-bleaching agents: A systematic review, meta-analysis, and technological prospecting.

The aim of this study is to analyze the efficacy of natural bleaching agents and the current technological development in this research field. Two reviewers performed a literature search up to July 2019 in 15 databases. Five laboratory studies and 25 patents were included. Data regarding natural bleaching agent used, application protocol, and the main findings of studies were analyzed. Laboratory studies that evaluated natural bleaching agents' peroxide-free or associated to peroxides and patents related to natural bleaching agents were included. The studies evaluated papain, bromelain, chlorine dioxide, sodium chloride plus vinegar and sodium bicarbonate as peroxide-free agents; and sweet potato extract, lactoperoxidase, and peroxidase associated to peroxide used were included. Twenty-five patents were included; among the most cited are the papain and the chlorine. The addition of non-peroxide agents into peroxide showed improvement in bleaching effect with the incorporation of these non-peroxide agents (p < .05). On the other hand, peroxide-free agents did not show an improvement in bleaching effect (p < .05). The evidence in literature suggested that natural bleaching agents incorporated to peroxide may improve the bleaching. Therefore, the current literature does not support the use of natural agents as dental bleaching.

Bonding Performance of Universal Adhesives: An Updated Systematic Review and Meta-Analysis.

PURPOSE: To evaluate through a systematic review and meta-analysis whether the immediate and long-term bonding performance of universal adhesives would be improved by prior acid etching. MATERIALS AND METHODS: Two reviewers performed a literature search up to April 2018 in eight databases: PubMed, Web of Science, Cochrane Library, SciELO, Scopus, LILACS, IBECS, and BBO. Only studies that evaluated the dentin or enamel bond strength of universal adhesives using a self-etch or etch-and-rinse strategy were included. Analyses were carried out using RevMan 5.3.5 (The Nordic Cochrane Centre, The Cochrane Collaboration, Copenhagen, Denmark). A global analysis comparing self-etch or etch-and-rinse strategies and the influence of aging on bonding performance was performed with random-effects models at a significance level of p < 0.05. RESULTS: A total of 59 in vitro studies were included in the meta-analysis. The enamel bond strength of universal adhesives was improved by the etch-and-rinse approach (p < 0.05). In dentin, this effect was observed for ultra-mild and intermediately strong universal adhesives (p < 0.05). Irrespective of the strategy employed, intermediately strong adhesives showed a decrease in bond strength after all types of aging. This effect was also observed for ultra--mild universal adhesives used in the etch-and-rinse approach (p < 0.05). Mild universal adhesives showed bond strength stability in both strategies (p > 0.05). CONCLUSIONS: The in vitro evidence suggests that bonding performance of mild universal adhesives can be improved by using the selective enamel-etch strategy. Mild universal adhesives seem to be the more stable materials, in both etch-and-rinse or self-etch strategies.

Diversity, frequency and antifungal resistance of Candida species in patients with type 2 diabetes mellitus.

OBJECTIVE: To determine number, species of Candida and Candida resistance to antifungal therapy according to the metabolic control state and the associated salivary changes in patients with type 2 diabetes mellitus (DM2). MATERIALS AND METHODS: Samples of non-stimulated saliva were collected from 52 patients with DM2. Salivary pH was measured and cultured on Sabouraud glucose agar and the values of CFU/ml were calculated. The species were presumptively identified using CHROMagar Candida® plates, and identification was confirmed by polymerase chain reaction (PCR). C. albicans isolates were cultured on SGA tetracycline agar with nystatin and fluconazole diffusion disks to measure susceptibility. RESULTS: Sixty six percent of the yeasts isolated were Candida albicans, followed by C. glabrata (20.7%). In patients with decompensated DM2, there was an inverse association between HbA1c value and salivary pH. At higher levels of salivary acidification, a greater diversity and quantity of yeasts of the genus Candida were observed. With nystatin, higher inhibition was observed at lower pH. CONCLUSIONS: The antifungal therapies could be more effective if it consider, qualitative salivary characteristics as pH, that could determine the susceptibility of species of Candida to at least to nystatin, which is the most used antifungal for treatment to oral candidiasis in patients with DM2.

Efficacy of antimicrobial agents incorporated in orthodontic bonding systems: a systematic review and meta-analysis.

AIMS: The purpose of this study was to evaluate the efficacy of orthodontic bonding systems containing different antimicrobial agents, as well as the influence of antimicrobial agent incorporation in the bonding properties of these materials. METHODS: Eight databases were searched: PubMed (Medline), Web of Science, Scopus, Lilacs, Ibecs, BBO, Scielo and Google Scholar. Any study that evaluated antimicrobial activity in experimental or commercial orthodontic bonding systems was included. DATA EXTRACTION: Data were tabulated independently and in duplicated by two authors on pre-designed data collection form. DATA SYNTHESIS: The global analysis was carried out using a random-effects model, and pooled-effect estimates were obtained by comparing the standardised mean difference of each antimicrobial orthodontic adhesive with the respective control group. A p-value < .05 was considered as statistically significant. RESULTS: Thirty-two studies were included in the qualitative analysis; of these, 22 studies were included in the meta-analysis. Antimicrobial agents such as silver nanoparticles, benzalkonium chloride, chlorhexidine, triclosan, cetylpyridinium chloride, Galla chinensis extract, acid ursolic, dimethylaminododecyl methacrylate, dimethylaminohexadecyl methacrylate, 2-methacryloyloxyethyl phosphorylcholine, 1,3,5-triacryloylhexahydro-1,3,5-triazine, zinc oxide and titanium oxide have been incorporated into orthodontic bonding systems. The antimicrobial agent incorporation in orthodontic bonding systems showed higher antimicrobial activity than the control group in agar diffusion (overall standardised mean difference: 3.71; 95% CI 2.98 to 4.43) and optical density tests (0.41; 95% CI -0.05 to 0.86) (p < .05). However, for biofilm, the materials did not present antimicrobial activity (6.78; 95% CI 4.78 to 8.77). Regarding bond strength, the global analysis showed antimicrobial orthodontic bonding systems were statistically similar to the control. CONCLUSIONS: Although there is evidence of antibacterial activity from in vitro studies, clinical and long-term studies are still necessary to confirm the effectiveness of antibacterial orthodontic bonding systems in preventing caries disease.

The Phytochemistry and Pharmacology of Butia sp.: A Systematic Review and an Overview of the Technological Monitoring Process.

The Butia sp. are native South America trees, whose fruits are consumed in natura and have significant biological properties; however, trees of this genus plant are in danger of extinction. A systematic review of the literature and a technological overview were carried out to summarize the available evidence on the therapeutic uses and the phytochemical compounds of Butia sp. The following electronic databases were researched: MedLine (PubMed), Web of Science, Scopus, Scielo, and the gray literature. Furthermore, the online system such as the US Patent and Trademark Office, Espacenet, National Institute of Industrial Property, and Google Patents were accessed to obtain patent data. The inclusion criteria were articles that describe either the therapeutic uses of Butia sp. (antimicrobial activity, antioxidant activity, anti-inflammatory activity, antineoplastic activity) or studies describing phytochemical compounds of Butia sp. A limited amount of manual search was also undertaken. Reference lists were scanned to identify other relevant studies, and requests for unpublished data were conducted to people working in the field. Among 12 papers and 14 patents, 9 complete texts of scientific articles and 1 patent were scrutinised by two reviewers. We concluded that Butia has shown some antioxidant, anti-inflammatory, and antimicrobial activity, and its use could have important implications for future therapeutic uses. Although there is evidence of pharmacological potential from in vitro studies, clinical studies must be conducted to confirm the effectiveness of Butia sp. The evidence of its therapeutic uses has not been extensively studied yet, and the available evidence still needs further confirmation. Copyright © 2017 John Wiley & Sons, Ltd.

In situ evaluation of color stability and hardness' decrease of resin-based composites.

OBJECTIVE: To determine the color stability (CS) and hardness' decrease (HD) of two commercial resin-based composites (RBCs), after in situ staining conditions (SC). METHODS: Six disc-shaped specimens (6 × 2 mm) of two RBCs-Filtek Z350 XT (FZX) and IPS Empress Direct (IED)-were randomly distributed into palatal devices. Eight volunteers (aged 20-30 years) participated in this study. The in situ SC consisted of 400 mL consumption (2 × 200 mL/day) of water, orange juice, cola soda, and coffee and 140 mL consumption of red wine, 10 days each. CS was obtained by CIELAB color difference (ΔE*) and HD (in %) by the Knoop method (50 g for 15 s), after curing (baseline) and after the in situ SC. Data were statistically analyzed at α = 0.05 significance level. RESULTS: For both RBCs, the coffee (5.7 ± 0.5 for FZX; 5.9 ± 1.3 for IED) and red wine (6.1 ± 1.1 for FZX; 6.2 ± 1.6 for IED) groups showed the highest ΔE* while water the lowest (1.6 ± 0.6 for FZX; 1.8 ± 0.2 for IED). The highest HD was induced by red wine group for FZX (40.7 ± 5.4) and by cola soda for IED (40.6 ± 3.2) while the water groups (8.3 ± 1.7 for FZX; 7.8 ± 2.1 for IED) presented the lowest values for both RBCs. CONCLUSION: Both RBCs were affected by the in situ SC, but no significant differences for CS and HD were observed between them. Red wine and coffee showed higher discoloration potential. CLINICAL SIGNIFICANCE: This in situ study suggests that color stability and hardness' decrease of resin-based composites were dependent on the type of consumed beverage and materials' composition. Patients with esthetic direct restorations should be aware of the degradative potential of them.

(7-Chloroquinolin-4-yl)arylhydrazones: Candida albicans enzymatic repression and cytotoxicity evaluation, Part 2.

OBJECTIVE: This work describes the anti-enzymatic activity of (7-chloroquinolin-4-yl)arylhydrazones against Candida albicans and examines their cytotoxicity. MATERIAL AND METHODS: Ten C. albicans strains [nine isolates and one azole-resistant standard strain (ATCC 62342)] were used to assess the anti-enzymatic activity. Fifteen compounds at sub-antifungal concentrations ranging from 12.5 to 100 µg/ml were assessed after a 30-min exposure. The strains were seeded onto petri dishes with selective agar media for aspartyl proteases (Saps) and phospholipases (PLs). Enzymatic inhibition was measured by the reduction of the precipitation zone (Pz) against untreated strains (positive control). A colorimetric MTT assay was used with 3T3/NIH mouse fibroblasts to evaluate cytotoxicity. Cells were exposed to 15 compounds in concentrations from 6.25 to 100 µg/ml for 24 and 48 h. RESULTS: Four hydrazones showed enzymatic repression values over 40% to Pl and three over 20% to Saps. The cell viability was over 50% at hydrazone concentrations of 25-100 µg/ml. CONCLUSION: These results revealed that select (7-chloroquinolin-4-yl)arylhydrazones may be potential antifungal agents for the control of C. albicans infections.

Anti-Candida, anti-enzyme activity and cytotoxicity of 3,5-diaryl-4,5-dihydro-1H-pyrazole-1-carboximidamides.

Because of the need for more effective and less harmful antifungal therapies, and interest in the synthesis of new carboximidamides, the goal of this study was to determine the antifungal and anti-enzyme activities of some new pyrazole carboximidamides and their cytotoxicity. For this purpose, tests were performed to evaluate: minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC); production of proteinases and phospholipase, and cytotoxicity of the extracts. Data were analyzed by ANOVA and Tukey Tests (α = 5%). The results were: MIC and MFC ≥ 62.5 µg/mL (C. albicans, C. parapsilosis, C. famata, C. glabrata, and Rhodotorula mucillaginosa) and MIC and MFC ≥ 15.6 µg/mL (C. lipolytica). The values of proteinase and phospholipase (Pz) of C. albicans before and after exposure to the compounds were: 0.6 (±0.024) and 0.2 (±0.022) and 0.9 (±0.074) and 0.3 (±0.04), respectively. These proteinase results were not significant (p = 0.69), but those of phospholipase were (p = 0.01), and 15.6 µg/mL was the most effective concentration. The cytotoxicity means were similar among the tests (p = 0.32). These compounds could be useful as templates for further development through modification or derivatization to design more potent antifungal agents. Data from this study provide evidence that these new pyrazole formulations could be an alternative source for the treatment of fungal infections caused by Candida. However, a specific study on the safety and efficacy of these in vivo and clinical trials is still needed, in order to evaluate the practical relevance of the in vitro results.

Enhanced Antibacterial Properties of Titanium Surfaces through Diversified Ion Plating with Silver Atom Deposition.

In this study, we investigate the antibacterial effect of silver atoms implanted into a thin surface layer of titanium at low energies using an alternative ion plating technology called Diversified Ion Plating. Silver atoms were incorporated into titanium samples using reactive low-voltage ion plating at 2 keV and 4 keV. Surface modifications and morphology were evaluated using wettability, profilometry measurements, and energy-dispersive spectroscopy. For a precise determination of the quantity and depth of implanted silver atoms on titanium surfaces, a combination of experimental techniques such as Rutherford Backscattering Spectrometry along with Monte Carlo simulations were utilized. To assess the antibacterial effects of the silver atoms incorporated into pure titanium surfaces, bacterial suspension immersion tests were performed with a standard strain of Staphylococcus aureus (ATCC 12600). The outcomes indicate that titanium surfaces implanted with silver atoms were more effective in inhibiting the growth of Staphylococcus aureus than pure titanium surfaces. Better results were found when the deposition was performed at 4 keV, indicating that a deeper implantation of silver, spanning a few nanometers, can result in a longer and more effective release of silver atoms. These findings suggest the potential for the development of new, cost-effective biomaterials, paving the way for improved implant materials in various health-related applications.