Effects of simulated long-term exposure to bottled, neutral pH electrolyzed oxidizing water on the properties of denture base resins.

STATEMENT OF PROBLEM: Denture stomatitis can pose serious health risks, especially to older people. Chemical denture cleaning agents must be effective, yet not adversely affect the longevity of removable dentures. Ready-to-use (RTU) neutral pH electrolyzed oxidizing water (EOW) is an effective biocide against Candida albicans biofilms on denture resins, but the effects of daily disinfection with EOW on the physical and mechanical properties of resins have not been established. PURPOSE: The purpose of this in vitro study was to investigate the effects of simulated long-term exposure to RTU EOW on the color, surface characteristics, and flexural strength of denture base resins. MATERIAL AND METHODS: Heat-polymerized (HP), 3D printed (3D) and computer-aided design and computer-aided manufacture (CAD-CAM)-milled (CC) denture resin specimens (square: 20×20×3.3 mm; beam: 64×10×3.3 mm) were immersed in tap water (TW), RTU EOW (Neutral Anolyte ANK; Envirolyte; EOW), or a commercial denture cleaning tablet solution (Polident 3-Minute; Glaxo SmithKline; PD), mimicking a 5-minute once daily disinfection routine performed up to 3.0 years. Color and surface roughness were recorded (n=3, squares), and changes in color (∆E00) and surface roughness (∆Ra) were calculated. Flexural strength (n=12, beams) and surface hardness (n=18, beams) were measured with a universal testing machine. The fractured surfaces of specimens were examined by scanning electron microscopy and energy dispersive spectroscopy. Data were assessed by performing the Shapiro-Wilk or D'Agostino and Pearson normality tests. Two-way ANOVA or the Kruskal-Wallis test with a post hoc Tukey HSD or Dunn multiple comparisons (α=.05) was used for statistical analyses. RESULTS: No significant changes were found in either color or surface roughness for HP, 3D, and CC resins after 1.5-year and 3.0-year immersion in any of the agents (P>.05). The surface hardness of 3D resins reduced by 14% with TW and by 23% with EOW and PD at 3.0 years. The flexural strengths of all 3 resins were unaffected by 3.0-year immersion (P>.05). CONCLUSIONS: Simulated long-term immersion disinfection with RTU neutral pH EOW did not adversely affect the physical and mechanical properties of HP or CC denture resins.

Microbial Analysis of Obturators During Maxillofacial Prosthodontic Treatment Over an 8-Year Period.

The aim of the study was to investigate the microbial colonization (by Candida species, anaerobic and facultative anaerobic bacteria) of maxillary obturators used for the restoration of maxillary defects, including during radiotherapy.Retrospective cohort study.Fifteen patients requiring a maxillary obturator prosthesis had swabs of their obturators and adjacent tissues taken at different stages of their treatment over a period of 8 years.Identification of microbial species from the swabs was carried out using randomly amplified polymorphic DNA polymerase chain reaction (RAPD PCR) analysis, checkerboard DNA-DNA hybridization, CHROMagar Candida chromogenic agar, and DNA sequencing.Candida species were detected in all patients and all patients developed mucositis and candidiasis during radiotherapy which was associated with an increase in colonization of surfaces with Candida spp., particularly C albicans. Microbial colonization increased during radiotherapy and as an obturator aged, and decreased following a reline, delivery of a new prosthesis, or antifungal treatment during radiotherapy.Microbial colonization of maxillary obturators was related to the stage of treatment, age of the obturator material, radiotherapy and antifungal medications, and antifungal treatment may be recommended if C albicans colonization of palatal tissues is greater than 105 colony-forming units per cm2 following the first week of radiotherapy.

Electrolysed oxidising water as a multi-purpose biocide in dental healthcare-A scoping review.

OBJECTIVES: The objective of this scoping review was to map evidence of electrolysed oxidising water (EOW) as a biocide for dental applications of relevance to older people and identify research gaps. BACKGROUND: EOW is an emerging, "green," and cost-effective biocide. There are no reviews on the landscape of EOW research as either an antiseptic or disinfectant in dental healthcare or its suitability for the oral healthcare of older people. MATERIALS AND METHODS: The review follows the PRISMA Extension for Scoping Reviews (PRISMA-ScR) guidelines. Database searches (Google Scholar, PubMed, Web of Science, Ovid, Scopus and Science Direct) were undertaken using MESH terms and Boolean operators with no date restrictions, to identify full-text, original reports published in English-language peer-reviewed journals. RESULTS: The search yielded 114 papers that met the inclusion/exclusion criteria. Dental applications of EOW include its use as an endodontic irrigant (39%); mouth rinse/surgical irrigant (21%); disinfectant for dental unit water lines (19%) and dental biomaterials (17%); and for antimicrobial efficacy, effects on oral tissues and on dental material properties. Most studies (83%) evaluated a single EOW formulation (acidic, moderately acidic or neutral) that was either generated at 'point-of-use' (POU; 72%), bottled ('ready-to-use', RTU; 24%) or from unspecified (3%) sources. Six reports evaluated storage-related parameters and 25 evaluated clinical applications; 89 were in vitro studies and one investigated the cost-effectiveness of POU EOW. CONCLUSIONS: Neutral-pH, EOW is effective as an antimicrobial agent without deleterious effects on oral tissues. However, research on the impact of storage conditions, anti-Candida biofilm efficacy and mechanism of action against yeasts, long-term effects on denture materials and cost-effectiveness is required to establish the suitability of EOW as a multipurpose biocide for dental healthcare, including infection-control requirements relating to older people.

Stress distribution within the ceramic veneer-tooth system with butt joint and feathered edge incisal preparation designs.

OBJECTIVE: This in-vitro study aims to study the stress distribution within the ceramic veneer-tooth system with two incisal preparation designs-butt joint (BJ) and feathered edge (FE), and to correlate these findings to the results of our previous published load-to-failure study. METHODS: Six photoelastic models were fabricated with an epoxy resin material (West System 105 Epoxy Resin/205 Fast Hardener, West System) to represent BJ and FE preparation configurations at 0° and 20° loading angulations. Lithium disilicate ceramic veneers (IPS e.max CAD, Ivoclar Vivadent) were bonded to the BJ and FE photoelastic models using resin cement (IPS Variolink Esthetic, Ivoclar Vivadent). Each model was loaded using an Instron Universal Testing Machine at the incisal edge at a cross-head speed of 0.25 mm/min till 100 N. RESULTS: BJ photoelastic model had more uniform distribution compared with FE photoelastic models under 0° and 20° loading angulations. CONCLUSION: Parallel to the results of our earlier load-to-failure published study, both incisal preparation designs affect stress distribution within the ceramic veneer-tooth system. BJ photoelastic model demonstrated a more uniform distribution compared with FE photoelastic model. CLINICAL SIGNIFICANCE: BJ incisal preparation design has more uniform stress distribution than FE preparation design within the ceramic veneer-tooth system.

Effect of incisal preparation design on load-to-failure of ceramic veneers.

OBJECTIVE: This in vitro study aims to evaluate load-to-failure of ceramic veneers with butt joint (BJ) and feathered edge (FE) incisal preparation designs, and to correlate these results to the failure mode of the restorations. MATERIALS AND METHODS: One hundred and forty-eight typodont teeth (customized Nissin A25A-UL19B) were divided into two different preparation configurations BJ and FE and two different loading angulations, 0° and 20°. Lithium disilicate ceramic veneers (IPS e.max CAD, Ivoclar Vivadent) were milled using computer-aided-design-and-computer-aided-manufacturing (CAD/CAM) techniques. Veneers were bonded to typodont teeth with resin cement (IPS Variolink Esthetic, Ivoclar Vivadent). Each group was loaded at the incisal edge using an Instron Universal Testing Machine at a crosshead speed of 0.01 mm/s till failure. RESULTS: Pairwise comparison showed veneers from the BJ groups had a significantly higher load-to-failure value compared to the FE groups. Veneers with a FE preparation design loaded at 20° angulation had the lowest load-to-failure value. CONCLUSIONS: Within the limitations of the present study, both incisal preparation designs and loading angulations have significant effects on the load-to-failure values of ceramic veneers. BJ group exhibits a significantly higher load-to-failure value compared to the FE group. CLINICAL SIGNIFICANCE: BJ incisal preparation is preferred over FE preparation design.

The Role of Biofilms and Material Surface Characteristics in Microbial Adhesion to Maxillary Obturator Materials: A Literature Review.

BACKGROUND: Maxillofacial prosthetics includes restoration of maxillary defects resulting from resection of palate and nasosinus neoplasms with obturator prostheses which may be colonized by microorganisms and function as a reservoir of infection. Patients with neoplasms commonly also require radiotherapy that can result in changes in saliva quality and quantity and changes in the oral microbial flora. The altered flora, in individuals immunocompromised from cancer therapy, increases their risk of prosthesis-related infections. OBJECTIVES: In this review article, we explore microbial biofilms, their main components, mechanisms of microbial adhesion, and stages of biofilm development. We also discuss the different materials that are used for manufacturing maxillary obturators, their characteristic features, and how these can affect microbial adhesion. Furthermore, we shed some light on the factors that affect microbial adhesion to the surface of maxillary obturators including tissue proteins, protein adsorption, and the acquired enamel pellicle. CONCLUSIONS: The conclusions drawn from this literature review are that it is imperative to minimize the risk of local and systemic infections in immunocompromised patients with cancer having maxillary defects. It is also important to determine the role of saliva in microbial adhesion to obturator materials as well as develop materials that have a longer life span with surface characteristics that promote less microbial adhesion than current materials.

Personality, xerostomia and OHRQoL among 35-54-year-olds.

OBJECTIVE: Personality characteristics mean that people may interpret similar symptoms differently, complicating the measurement of self-reported oral health, and so we tested the hypothesis that controlling for aspects of personality makes a difference to the association between xerostomia and oral-health-related quality of life. MATERIAL AND METHODS: A cross-sectional study was conducted of a representative adult population sample in Dunedin (New Zealand). Data were collected on xerostomia, OHRQoL and personality characteristics, using (respectively) the 5-item Shortened Xerostomia Inventory (SXI), the OHIP-14 and the Positive and Negative Affect Schedule (PANAS). Negative binomial regression was used to model the association between the SXI and the OHIP-14 scores, and models with and without the PANAS score were compared. RESULTS: The participation rate was 51.3%, with complete OHIP-14 data available for 250 individuals (56.5% female). The SXI score (mean 6.9, sd 1.8) was strongly and positively associated with the OHIP-14 score (in both models), as was the PANAS negative affect score in the second model, which also explained slightly more of the observed variance than the first model. However, the difference in model deviance fell short of the amount required to reject the hypothesis that adding the PANAS variables to the model made a significant difference. CONCLUSIONS: Considering aspects of personality in investigating OHRQoL remains a theoretically important undertaking, but adjusting for it in analyses of associations between xerostomia and OHRQoL is unlikely to be necessary.

Curriculum development in final year dentistry to enhance competency and professionalism for contemporary general dental practice.

INTRODUCTION: General dentistry is the most common area of practice, and new dentists must have the competency and skills to safely deliver patient care. In New Zealand (NZ), completion of a 5-year Bachelor of Dental Surgery (BDS) degree enables graduates to register with the Dental Council in NZ. This necessitates that the clinical component of the curriculum in final year dentistry (BDS5) transparently delivers learning opportunities and evaluates competency for independent practice. A review of the BDS5 Clinical Practice course was undertaken in 2015 and a revised curriculum introduced in 2016. CURRICULUM: We present a BDS5 curriculum for a Clinical Practice course that is learner focused with emphasis on comprehensive patient-centred care, competency and professional practice. Learning opportunities and assessment processes are described alongside teacher training. These changes have provided students scaffolding to support clinical and professional development, and accommodate different learning preferences. The outcomes align with the competency requirements of the NZ regulatory body for registration as a general dental practitioner. Since its introduction 3 years ago, ongoing feedback from students and staff has been positive and indicates the curriculum is effective in achieving its objectives. CONCLUSIONS: This curriculum provides a firm foundation for students transitioning to independent clinical practice in the community and supports the professional development of clinical teachers. It may also be translated to other areas of health education to ensure the delivery of quality holistic patient care.

Interdisciplinary interface between fixed prosthodontics and periodontics.

Although periodontal factors do not usually have a direct effect on the survival of a fixed prosthesis, harmony between the prosthesis and the periodontium is critical otherwise esthetics, the longevity of the prosthesis and the periodontium will be compromised. A close interdisciplinary relationship between periodontics and prosthodontics is therefore necessary to avoid an unsatisfactory treatment outcome, requiring extensive and expensive retreatment. The design of the prosthesis, the number and quality of the abutment teeth, the preparation and the pontic, the occlusion and the material need to be considered when planning prosthodontic treatment. The location of the preparation margin and the contour and emergence profile of the prosthesis will influence the response of the gingival tissues to the prosthesis. Pontic design and cleansibility also contribute to the response of the gingival tissues as well as to the clinical and esthetic outcome. Even an optimal pontic design will not prevent inflammation of the mucosa adjacent to the pontic if pontic hygiene is not maintained by removal of plaque. Case selection and the patients' ability to carry out adequate oral hygiene are therefore essential for longevity of the prosthesis, and regular reviews provide an opportunity for early detection and treatment of failures.

Interdisciplinary periodontics: the multidisciplinary approach to the planning and treatment of complex cases.

Periodontics cannot be practiced in isolation as frequently many patients have multiple dental needs or medical health issues requiring management. In addition, pathology may manifest in the periodontal tissues, and the onset and progression of periodontitis can be affected by systemic conditions, such as diabetes, and vice versa. The focus of this volume of Periodontology 2000 is interdisciplinary periodontics, and the articles included discuss the interactions and the interrelationshipbetween periodontal tissues/periodontal diseases and endodontics, fixed prosthodontics, implant dentistry, esthetics, gerodontology, radiology, orthodontics, pediatric dentistry, oral and maxillofacial surgery, oral pathology, special needs dentistry and general medicine. Previous volumes of Periodontology 2000 have covered some of the interactions between periodontal diseases and other dental disciplines, especially implant dentistry, 'and the interaction between periodontal disease and systemic disease', but there has not been a volume on interdisciplinary periodontics. The intention therefore is to show how and why periodontics should be interdisciplinary, as well as the benefits of an interdisciplinary approach; in addition, the potential consequences of using a discipline in isolation are discussed.

The periodontal restorative interface: esthetic considerations.

Esthetic considerations are a significant contributing factor in the management of prosthodontic cases and an interdisciplinary approach is often necessary to achieve an optimal result. The visible soft-tissue architecture plays a key role in developing an esthetic smile. Furthermore, an understanding of the relationship between the restorative margin and the gingiva is important for long-term stability of the result. The gingival architecture and gingival health are important for ensuring optimal esthetics following prosthodontic work and close attention to both soft and hard tissues around the teeth, before, during and after restorative procedures, will greatly improve the likelihood of a successful outcome. Moreover, knowing the options available in periodontal plastic surgery is important in esthetic dentistry today. The relevant literature related to restorative and surgical procedures when performing esthetic dentistry are reviewed in this article, and different approaches are illustrated with appropriate cases to explain the treatment approach that was utilized to improve the esthetic appearance of the case.

Additive Technology: Update on Current Materials and Applications in Dentistry.

Additive manufacturing or 3D printing is becoming an alternative to subtractive manufacturing or milling in the area of computer-aided manufacturing. Research on material for use in additive manufacturing is ongoing, and a wide variety of materials are being used or developed for use in dentistry. Some materials, however, such as cobalt chromium, still lack sufficient research to allow definite conclusions about the suitability of their use in clinical dental practice. Despite this, due to the wide variety of machines that use additive manufacturing, there is much more flexibility in the build material and geometry when building structures compared with subtractive manufacturing. Overall additive manufacturing produces little material waste and is energy efficient when compared to subtractive manufacturing, due to passivity and the additive layering nature of the build process. Such features make the technique suitable to be used with fabricating structures out of hard to handle materials such as cobalt chromium. The main limitations of this technology include the appearance of steps due to layering of material and difficulty in fabricating certain material generally used in dentistry for use in 3D printing such as ceramics. The current pace of technological development, however, promises exciting possibilities.

Measuring the attitudes of dental students towards social accountability following dental education - Qualitative findings.

BACKGROUND: The term social accountability has gained increased interest in medical education, but is relatively unexplored in dentistry. AIMS: The aim of this study is to explore dental students' attitudes towards social accountability. METHODS: A qualitative study utilizing focus groups with University of Otago final year (5th year) Bachelor of Dental Surgery (BDS) students was carried out. A questionnaire designed to measure medical students' attitudes towards social responsibility was used as a guide. Following data collection, framework analysis was used to analyze each of the three focus groups, and repeating themes were noted. RESULTS: Analysis of the focus groups discovered recurring themes, such that participants believed that dentists should be accountable to society in a professional context and that they are responsible for patients who present at their clinic but that there is no professional obligation to help reduce oral health inequalities by working with populations facing inequalities. There was strong agreement that there needs to be change to the dental health care system from a structural and political level to address oral health inequalities, rather than individual dentists assuming greater responsibility. CONCLUSION: Our findings show that dental education may not be accountable to society in the sense that it is not producing graduates who believe that they have an obligation to address the priority oral health concerns of society.

Monitoring Shore A hardness of silicone facial elastomers: the effect of natural aging and silicone type after 1 year.

OBJECTIVES: The purpose of this study was to investigate the effect of natural aging after storage in the dark for 1 year and material type on Shore A hardness of 2 silicone prosthetic elastomers. MATERIALS AND METHODS: The silicone elastomers tested were low- and high-temperature vulcanizing materials, namely, Premium and Silasto 30, respectively. Ten samples, 25 × 25 × 10 mm3, from each silicone were made and stored in sealed glass containers in the dark. Shore A hardness was measured according to the American Society for Testing Materials specification D2240. Three recordings were made on each sample at baseline and then weekly for 12 months (quadruplicate per mo). Data were analyzed by general linear modeling for repeated measures and Student-Newman-Keuls test for post hoc comparisons at α = 0.05. RESULTS: General linear modeling analysis indicated a significant influence of either silicone type (F = 229.5, P = 0.0001) or natural aging (F = 105.9, P = 0.0001) or their interaction (F = 27.6, P = 0.0001) on Shore A hardness values. For Premium and Silasto 30, Shore A hardness ranged from 16.9 to 26.0 and 32.0 to 36.3, respectively. The elastomers showed a trend to increase hardness over natural aging, which was significant (Premium) or not (Silasto 30), depending on the material and time intervals. CONCLUSIONS: Premium silicone showed a significant hardness increase after 1 year of natural aging in the dark, reaching a convergent value approximately 6 months from the onset, whereas Silasto 30 hardness remained stable during this period. Both elastomers showed Shore A hardness values within clinical acceptable limits after aging.

Wear behavior of human enamel against lithium disilicate glass ceramic and type III gold.

STATEMENT OF PROBLEM: The wear behavior of human enamel that opposes different prosthetic materials is still not clear. PURPOSE: The purpose of this in vitro study was to investigate and compare the friction and wear behavior of human tooth enamel that opposes 2 indirect restorative materials: lithium disilicate glass ceramic and Type III gold. MATERIAL AND METHODS: Friction-wear tests on human enamel (n=5) that opposes lithium disilicate glass ceramic (n=5) and Type III gold (n=5) were conducted in a ball-on-flat configuration with a reciprocating wear testing apparatus. The wear pairs were subjected to a normal load of 9.8 N, a reciprocating amplitude of approximately 200 µm, and a reciprocating frequency of approximately 1.6 Hz for up to 1100 cycles per test under distilled water lubrication. The frictional force of each cycle was recorded, and the corresponding friction coefficient for different wear pairs was calculated. After wear testing, the wear scars on the enamel specimens were examined under a scanning electron microscope. RESULTS: Type III gold had a significantly lower steady-state friction coefficient (P=.009) and caused less wear damage on enamel than lithium disilicate glass ceramic. Enamel that opposed lithium disilicate glass ceramic exhibited cracks, plow furrows, and surface loss, which indicated abrasive wear as the prominent wear mechanism. In comparison, the enamel wear scar that opposed Type III gold had small patches of gold smear adhered to the surface, which indicated a predominantly adhesive wear mechanism. CONCLUSIONS: A lower friction coefficient and better wear resistance were observed when human enamel was opposed by Type III gold than by lithium disilicate glass ceramic in vitro.

Influence of implant framework and mandibular flexure on the strain distribution on a Kennedy class II mandible restored with a long-span implant fixed restoration: a pilot study.

STATEMENT OF PROBLEM: The human mandible flexes during different jaw movements. Mandibular flexure is known to be restricted when natural dentition is restored with long-span fixed prostheses, but its effect on implant-supported fixed prostheses is unknown. Restriction of mandibular movement by implant-supported fixed prostheses may lead to excess strain accumulation, which could affect the outcome of implant treatment. PURPOSE: The purpose of this study was to investigate the influence of mandibular flexure on the implant bone interface by measuring the strain distribution in the body of the mandible at the periimplant level and at the implant framework level during the unilateral loading of a long-span implant-supported fixed prosthesis. MATERIAL AND METHODS: A partially edentulous mandible model with the mandibular left premolars and molars missing was fabricated in epoxy resin. Two implants were placed in the edentulous area, one in the position of the first premolar and one in the position of the second molar. Strain gauges were cemented at the implant bone interface parallel to each implant on the body of the mandible and on the framework. Three screw-retained, 3 × 3-mm bar-shaped frameworks were cast from cobalt-chromium alloy. The fit of these frameworks was deemed clinically acceptable with a routine clinical assessment technique. The mandible model was suspended by elastic cords to a universal testing machine. A 50-N load cell was placed on the occlusal surface of the right first molar. The mandible model was then loaded to 50 N on the working side first without any framework and then a second time with the framework in place. Information from the strain gauges were collected with a computer for analysis. RESULTS: When the mandible model was loaded without the implant framework, the buccal aspect of the body of the mandible experienced mainly compression, whereas the lingual aspect was mainly in tension on the working side under unilateral loading. At the implant-bone interface, compression strain was detected on the mesial aspect of the mesial implant. When frameworks were placed and a unilateral load applied, compression was detected on the mesial and buccal aspect of the mesial implant with all 3 frameworks. The amount of strain recorded was higher than that recorded without any framework in place. CONCLUSIONS: Mandibular flexure occurred during unilateral loading. The amount of strain transmitted to the implants increased with the screw-retained fixed-implant frameworks in place. The amount of strain introduced by mandibular flexure under unilateral loading may not be enough to stimulate bone remodeling; however, the accumulative strain generated by mandibular flexure under cyclic loading and its relationship with bone remodeling is unclear.

The effect of combined use of resin infiltration with different bioactive calcium phosphate-based approaches on enamel white spot lesions: An in vitro study.

OBJECTIVES: This in vitro study aimed to evaluate the effect of resin infiltration combined with casein phosphopeptide-amorphous calcium phosphate with fluoride (CPP-ACPF) or bioactive glass (BAG) on the stability of enamel white spot lesions (WSLs) treatment. MATERIALS AND METHODS: Eighty-four enamel blocks were prepared from the buccal surfaces of sound human premolars. All enamel blocks were placed in a demineralisation solution for 3 days to establish the artificial enamel WSLs. Enamel blocks with WSLs were randomly divided into three groups (n = 28 each group): RI/B: one-off resin infiltration followed by twice daily BAG treatment; RI/C: one-off resin infiltration followed by twice daily CPP-ACPF treatment; RI: one-off resin infiltration treatment only (as control) and subjected to pH cycling for 7 days. Surface morphology, elemental analysis, crystal characteristics, surface roughness and microhardness of enamel surfaces were investigated by scanning electron microscopy and energy-dispersive spectrometry observation, X-ray diffraction (XRD), atomic force microscope and Vickers' hardness testing, respectively. RESULTS: Mean values of the surface roughness (mean±standard deviation (nm)) were 24.52±5.07, 27.39±5.87 and 34.36±4.55 for groups RI/B, RI/C and RI respectively (p = 0.003). The calcium to phosphate ratios were 1.32±0.16, 1.22±0.26 and 0.69±0.24 for groups RI/B, RI/C and RI respectively (p < 0.001). XRD revealed apatite formation in all three groups. The mean enamel surface microhardness (kg/mm2) of the groups were 353.93±28.49, 339.00±27.32 and 330.38±22.55 for groups RI/B, RI/C and RI respectively (p = 0.216). CONCLUSIONS: Resin infiltration combined with CPP-ACPF or BAG remineralisation appears to improve the surface properties of WSLs. CLINICAL SIGNIFICANCE: The combination of resin infiltration and CPP-ACPF/BAG remineralisation may be a potential treatment for the management of the WSLs.

A randomized clinical trial investigating the effect of three vital tooth bleaching protocols on oral health-related quality of life.

Objectives: This study aimed to compare changes in oral health-related quality of life (OHRQoL) resulting from three vital tooth bleaching protocols. Methods: The participants (n = 105) were randomly assigned to one of three vital bleaching treatment groups: home bleaching (HB), in-office bleaching (IOB), or combined bleaching (CB). HB involved the use of custom-made trays and 10% carbamide peroxide for a 14-day treatment period. IOB utilized 37.5% hydrogen peroxide applied in three cycles. CB treatment involved the use of IOB followed by HB. Tooth colour change was evaluated using a shade guide (ΔVS) and a digital spectrophotometry device (ΔES). The Oral Health Impact Profile-14 (OHIP-14) and Oral Impact on Daily Performance-22 (OIDP-22) instruments were used to assess changes in OHRQoL at baseline, 15-days and 6-month recalls. Linear mixed models were used to estimate between- and within-group differences. Results: All bleaching protocols led to significant improvements in overall OHIP-14 scores at the 6-month recall (p ≤ 0.037). CB and IOB treatments were associated with more substantial positive impacts on overall scores, psychological discomfort, physical disability (CB only), and psychological disability (CB only) compared to HB (p ≤ 0.011). Significant enhancements in OIDP-22 scores were observed in the CB and HB groups at the 6-month recall compared to baseline (p ≤ 0.006), with evidence indicating that these improvements were greater in the CB group compared to the IOB group (p = 0.007). Conclusion: All bleaching treatments demonstrated a positive impact on OHRQoL. However, the positive impact was most consistent across domains and age groups in the CB group. The positive impact was less pronounced in older age groups.

How long will it last? The expected longevity of prosthodontic and restorative treatment.

With the Internet facilitating access to vast amounts of free information, dental practitioners face providing treatment for an increasingly informed public. However, the available content is not filtered, and it can be difficult for patients to discriminate between research-informed evidence and "glamorised" material of dubious origin. Patients reasonably expect a return for their investment and want to know how long their treatment will last. Clinicians have an obligation to inform their patients so that they can make reasoned decisions about treatment options. Longevity data are also informative for health agencies setting service schedules for publicly funded treatment, and for determining settlements by insurers such as ACC. Historically, much of the prosthodontic treatment performed in practice has relied heavily on dogma, low-level anecdotal evidence, and clinical case reports. This paper considers the literature on fixed and removable prosthodontic restorations and provides a critical review which can be used practically as the basis for informing patients, and to assist decision-makers in making fair and appropriate judgements.

Geriatric oral health care content and barriers to its incorporation in undergraduate nursing curricula: New Zealand survey.

INTRODUCTION: An increasingly older population demands major remodeling of our health care system. Older adults are most likely to be affected by the oral-systemic connection due to their impairment in functional capacity and reduced ability to undertake routine oral care. An economic way to improve oral health outcomes in older populations is by involving nurses and caregivers in ensuring the maintenance of oral health for older adults. This study aimed to investigate the present educational content relevant to the oral health of older adults, the oral-systemic connection, and assessment methods in New Zealand nursing education. METHODS: A cross-sectional survey was conducted among nursing educators to understand the extent of oral health care education. Quantitative descriptive data were analyzed using SPSS software and qualitative data were analyzed descriptively and presented as themes. RESULTS: The results indicated that the majority of oral health topics were already incorporated into nursing education, however most important topics such as risk factors associated with dental caries, periodontal health, and risk factors are not taught in almost 40% of the schools. The four themes identified in qualitative analyses are "no barrier", "lack of expertise", "no space for more content" and oral health content "already included". CONCLUSION: Educators reported that oral health topics are already incorporated into New Zealand undergraduate nursing curricula. However, the quantity and quality of oral health content relevant to older adults need to be improved and updated to suit the current oral health care needs of the growing older population.